.. highlight:: cython

.. _extension_types:

***************
Extension Types
***************

* Normal Python as well as extension type classes can be defined.
* Extension types:

 * Are considered by Python as "built-in" types.
 * Can be used to wrap arbitrary C-data structures, and provide a Python-like interface to them from Python.
 * Attributes and methods can be called from Python or Cython code
 * Are defined by the ``cdef class`` statement.

::

    cdef class Shrubbery:

        cdef int width, height

        def __init__(self, w, h):
            self.width = w
            self.height = h

        def describe(self):
            print "This shrubbery is", self.width, \
                "by", self.height, "cubits."

==========
Attributes
==========

* Are stored directly in the object's C struct.
* Are fixed at compile time.

 * You can't add attributes to an extension type instance at run time like in normal Python, unless you define a ``__dict__`` attribute.
 * You can sub-class the extension type in Python to add attributes at run-time.

* There are two ways to access extension type attributes:

 * By Python look-up.

  * Python code's only method of access.

 * By direct access to the C struct from Cython code.

  * Cython code can use either method of access, though.

* By default, extension type attributes are:

 * Only accessible by direct access.
 * Not accessible from Python code.

* To make attributes accessible to Python, they must be declared ``public`` or ``readonly``::

    cdef class Shrubbery:
        cdef public int width, height
        cdef readonly float depth

 * The ``width`` and ``height`` attributes are readable and writable from Python code.
 * The ``depth`` attribute is readable but not writable.

.. note::
    .. note::
        You can only expose simple C types, such as ints, floats, and strings, for Python access. You can also expose Python-valued attributes.

    .. note::
        The ``public`` and ``readonly`` options apply only to Python access, not direct access. All the attributes of an extension type are always readable and writable by C-level access.


=======
Methods
=======

* ``self`` is used in extension type methods just like it normally is in Python.
* See **Functions and Methods**; all of which applies here.

==========
Properties
==========

* Cython provides a special (deprecated) syntax::

    cdef class Spam:

        property cheese:

            "A doc string can go here."

            def __get__(self):
                # This is called when the property is read.
                ...

            def __set__(self, value):
                # This is called when the property is written.
                ...

            def __del__(self):
                # This is called when the property is deleted.

* The ``__get__()``, ``__set__()``, and ``__del__()`` methods are all optional.

 * If they are omitted, an exception is raised on attribute access.

* Below, is a full example that defines a property which can..

 * Add to a list each time it is written to (``"__set__"``).
 * Return the list when it is read (``"__get__"``).
 * Empty the list when it is deleted (``"__del__"``).

::

        # cheesy.pyx
        cdef class CheeseShop:

            cdef object cheeses

            def __cinit__(self):
                self.cheeses = []

            property cheese:   # note that this syntax is deprecated

                def __get__(self):
                    return "We don't have: %s" % self.cheeses

                def __set__(self, value):
                    self.cheeses.append(value)

                def __del__(self):
                    del self.cheeses[:]

        # Test input
        from cheesy import CheeseShop

        shop = CheeseShop()
        print shop.cheese

        shop.cheese = "camembert"
        print shop.cheese

        shop.cheese = "cheddar"
        print shop.cheese

        del shop.cheese
        print shop.cheese

::

        # Test output
        We don't have: []
        We don't have: ['camembert']
        We don't have: ['camembert', 'cheddar']
        We don't have: []


===============
Special Methods
===============

.. note::

    #. The semantics of Cython's special methods are similar in principle to that of Python's.
    #. There are substantial differences in some behavior.
    #. Some Cython special methods have no Python counter-part.

* See the :ref:`special_methods_table` for the many that are available.


Declaration
===========

* Must be declared with ``def`` and cannot be declared with ``cdef``.
* Performance is not affected by the ``def`` declaration because of special calling conventions

Docstrings
==========

* Docstrings are not supported yet for some special method types.
* They can be included in the source, but may not appear in the corresponding ``__doc__`` attribute at run-time.

 * This a Python library limitation because the ``PyTypeObject`` data structure is limited


Initialization: ``__cinit__()`` and ``__init__()``
==================================================

* Any arguments passed to the extension type's constructor
  will be passed to both initialization methods.

* ``__cinit__()`` is where you should perform C-level initialization of the object

 * This includes any allocation of C data structures.
 * **Caution** is warranted as to what you do in this method.

  * The object may not be fully valid Python object when it is called.
  * Calling Python objects, including the extensions own methods, may be hazardous.

 * By the time ``__cinit__()`` is called...

  * Memory has been allocated for the object.
  * All C-level attributes have been initialized to 0 or null.
  * Python have been initialized to ``None``, but you can not rely on that for each occasion.
  * This initialization method is guaranteed to be called exactly once.

 * For Extensions types that inherit a base type:

  * The ``__cinit__()`` method of the base type is automatically called before this one.
  * The inherited ``__cinit__()`` method can not be called explicitly.
  * Passing modified argument lists to the base type must be done through ``__init__()``.
  * It may be wise to give the ``__cinit__()`` method both ``"*"`` and ``"**"`` arguments.

   * Allows the method to accept or ignore additional arguments.
   * Eliminates the need for a Python level sub-class, that changes the ``__init__()``
     method's signature, to have to override both the ``__new__()`` and ``__init__()`` methods.

  * If ``__cinit__()`` is declared to take no arguments except ``self``, it will ignore any
    extra arguments passed to the constructor without complaining about a signature mis-match.


* ``__init__()`` is for higher-level initialization and is safer for Python access.

 * By the time this method is called, the extension type is a fully valid Python object.
 * All operations are safe.
 * This method may sometimes be called more than once, or possibly not at all.

  * Take this into consideration to make sure the design of your other methods are robust of this fact.

Note that all constructor arguments will be passed as Python objects.
This implies that non-convertible C types such as pointers or C++ objects
cannot be passed into the constructor from Cython code.  If this is needed,
use a factory function instead that handles the object initialisation.
It often helps to directly call ``__new__()`` in this function to bypass the
call to the ``__init__()`` constructor.


Finalization: ``__dealloc__()``
===============================

* This method is the counter-part to ``__cinit__()``.
* Any C-data that was explicitly allocated in the ``__cinit__()`` method should be freed here.
* Use caution in this method:

 * The Python object to which this method belongs may not be completely intact at this point.
 * Avoid invoking any Python operations that may touch the object.
 * Don't call any of this object's methods.
 * It's best to just deallocate C-data structures here.

* All Python attributes of your extension type object are deallocated by Cython after the ``__dealloc__()`` method returns.

Arithmetic Methods
==================

.. note:: Most of these methods behave differently than in Python

* There are not "reversed" versions of these methods... there is no __radd__() for instance.
* If the first operand cannot perform the operation, the same method of the second operand is called, with the operands in the same order.
* Do not rely on the first parameter of these methods, being ``"self"`` or the right type.
* The types of both operands should be tested before deciding what to do.
* Return ``NotImplemented`` for unhandled, mis-matched operand types.
* The previously mentioned points..

 * Also apply to 'in-place' method ``__ipow__()``.
 * Do not apply to other 'in-place' methods like ``__iadd__()``, in that these always take ``self`` as the first argument.


Rich Comparisons
================

.. note:: There are no separate methods for individual rich comparison operations.

* A single special method called ``__richcmp__()`` replaces all the individual rich compare, special method types.
* ``__richcmp__()`` takes an integer argument, indicating which operation is to be performed as shown in the table below.

    +-----+-----+
    |  <  |  0  |
    +-----+-----+
    | ==  |  2  |
    +-----+-----+
    |  >  |  4  |
    +-----+-----+
    | <=  |  1  |
    +-----+-----+
    | !=  |  3  |
    +-----+-----+
    | >=  |  5  |
    +-----+-----+




The ``__next__()`` Method
=========================

* Extension types used to expose an iterator interface should define a ``__next__()`` method.
* **Do not** explicitly supply a ``next()`` method, because Python does that for you automatically.


===========
Subclassing
===========

* An extension type may inherit from a built-in type or another extension type::

    cdef class Parrot:
        ...

    cdef class Norwegian(Parrot):
        ...

* A complete definition of the base type must be available to Cython

 * If the base type is a built-in type, it must have been previously declared as an ``extern`` extension type.
 * ``cimport`` can be used to import the base type, if the extern declared base type is in a ``.pxd`` definition file.

 * In Cython, multiple inheritance is not permitted.. singular inheritance only

* Cython extension types can also be sub-classed in Python.

 * Here multiple inheritance is permissible as is normal for Python.
 * Even multiple extension types may be inherited, but C-layout of all the base classes must be compatible.


====================
Forward Declarations
====================

* Extension types can be "forward-declared".
* This is necessary when two extension types refer to each other::

    cdef class Shrubbery # forward declaration

    cdef class Shrubber:
        cdef Shrubbery work_in_progress

    cdef class Shrubbery:
        cdef Shrubber creator

* An extension type that has a base-class, requires that both forward-declarations be specified::

    cdef class A(B)

    ...

    cdef class A(B):
        # attributes and methods


========================
Extension Types and None
========================

* Parameters and C-variables declared as an Extension type, may take the value of ``None``.
* This is analogous to the way a C-pointer can take the value of ``NULL``.

.. note::
    #. Exercise caution when using ``None``
    #. Read this section carefully.

* There is no problem as long as you are performing Python operations on it.

 * This is because full dynamic type checking is applied

* When accessing an extension type's C-attributes, **make sure** it is not ``None``.

 * Cython does not check this for reasons of efficiency.

* Be very aware of exposing Python functions that take extension types as arguments::

    def widen_shrubbery(Shrubbery sh, extra_width): # This is
    sh.width = sh.width + extra_width

    * Users could **crash** the program by passing ``None`` for the ``sh`` parameter.
    * This could be avoided by::

        def widen_shrubbery(Shrubbery sh, extra_width):
            if sh is None:
                raise TypeError
            sh.width = sh.width + extra_width

    * Cython provides a more convenient way with a ``not None`` clause::

        def widen_shrubbery(Shrubbery sh not None, extra_width):
            sh.width = sh.width + extra_width

    * Now this function automatically checks that ``sh`` is not ``None``, as well as that is the right type.

* ``not None`` can only be used in Python functions (declared with ``def`` **not** ``cdef``).
* For ``cdef`` functions, you will have to provide the check yourself.
* The ``self`` parameter of an extension type is guaranteed to **never** be ``None``.
* When comparing a value ``x`` with ``None``, and ``x`` is a Python object, note the following:

 * ``x is None`` and ``x is not None`` are very efficient.

  * They translate directly to C-pointer comparisons.

 * ``x == None`` and ``x != None`` or ``if x: ...`` (a boolean condition), will invoke Python operations and will therefore be much slower.

================
Weak Referencing
================

* By default, weak references are not supported.
* It can be enabled by declaring a C attribute of the ``object`` type called ``__weakref__()``::

    cdef class ExplodingAnimal:
        """This animal will self-destruct when it is
        no longer strongly referenced."""

        cdef object __weakref__

==================
Dynamic Attributes
==================

* By default, you cannot dynamically add attributes to a ``cdef class`` instance at runtime.
* It can be enabled by declaring a C attribute of the ``dict`` type called ``__dict__``::

    cdef class ExtendableAnimal:
        """This animal can be extended with new
        attributes at runtime."""

        cdef dict __dict__

.. note::
    #. This can have a performance penalty, especially when using ``cpdef`` methods in a class.

=========================
External and Public Types
=========================


Public
======

* When an extension type is declared ``public``, Cython will generate a C-header (".h") file.
* The header file will contain the declarations for it's **object-struct** and it's **type-object**.
* External C-code can now access the attributes of the extension type.


External
========

* An ``extern`` extension type allows you to gain access to the internals of:

 * Python objects defined in the Python core.
 * Non-Cython extension modules

* The following example lets you get at the C-level members of Python's built-in "complex" object::

    cdef extern from "complexobject.h":

        struct Py_complex:
            double real
            double imag

        ctypedef class __builtin__.complex [object PyComplexObject]:
            cdef Py_complex cval

    # A function which uses the above type
    def spam(complex c):
        print "Real:", c.cval.real
        print "Imag:", c.cval.imag

.. note:: Some important things in the example:
    #. ``ctypedef`` has been used because Python's header file has the struct declared with::

        ctypedef struct {
        ...
        } PyComplexObject;

    #. The module of where this type object can be found is specified along side the name of the extension type. See **Implicit Importing**.

    #. When declaring an external extension type...

     * Don't declare any methods, because they are Python method class the are not needed.
     * Similar to **structs** and **unions**, extension classes declared inside a ``cdef extern from`` block only need to declare the C members which you will actually need to access in your module.


Name Specification Clause
=========================

.. note:: Only available to **public** and **extern** extension types.

* Example::

    [object object_struct_name, type type_object_name ]

* ``object_struct_name`` is the name to assume for the type's C-struct.
* ``type_object_name`` is the name to assume for the type's statically declared type-object.
* The object and type clauses can be written in any order.
* For ``cdef extern from`` declarations, This clause **is required**.

 * The object clause is required because Cython must generate code that is compatible with the declarations in the header file.
 * Otherwise the object clause is optional.

* For public extension types, both the object and type clauses **are required** for Cython to generate code that is compatible with external C-code.

================================
Type Names vs. Constructor Names
================================

* In a Cython module, the name of an extension type serves two distinct purposes:

 #. When used in an expression, it refers to a "module-level" global variable holding the type's constructor (i.e. it's type-object)
 #. It can also be used as a C-type name to declare a "type" for variables, arguments, and return values.

* Example::

    cdef extern class MyModule.Spam:
        ...

 * The name "Spam" serves both of these roles.
 * Only "Spam" can be used as the type-name.
 * The constructor can be referred to by other names.
 * Upon an explicit import of "MyModule"...

  * ``MyModule.Spam()`` could be used as the constructor call.
  * ``MyModule.Spam`` could not be used as a type-name

* When an "as" clause is used, the name specified takes over both roles::

    cdef extern class MyModule.Spam as Yummy:
        ...

 * ``Yummy`` becomes both type-name and a name for the constructor.
 * There other ways of course, to get hold of the constructor, but ``Yummy`` is the only usable type-name.























