Skip to content

osie
osie
Commit 3bab7efa authored by Ivan Tyagov's avatar Ivan Tyagov
Browse files
Options

Move I2C related code of MOD-IO to a separate file for clear code.

parent 49a15f6d
Show whitespace changes
Inline Side-by-side
Showing with 184 additions and 185 deletions
coupler/opc-ua-server/mod_io_i2c.h 0 → 100644
View file @ 3bab7efa
// global relay state
uint8_t I2C_0_RELAYS_STATE = 0; // state of 4 relays at I2C slave 0
uint8_t I2C_1_RELAYS_STATE = 0; // state of 4 relays at I2C slave 1
// XXX: what if we have more than 2 MOd-IOs / I2C slaves, we need better structure
// the default addresses of MOD-IOs
static char *DEFAULT_I2C_0_ADDR = "0x58";
// the list of attached I2C slaves
const int DEFAULT_I2C_SLAVE_ADDR = 0x58;
// XXX: make dynamic array
int I2C_SLAVE_ADDR_LIST[] = {0, 0, 0, 0, 0};
// the block device at host machine
static char *DEFAULT_I2C_BLOCK_DEVICE_NAME = "/dev/i2c-1";
char *I2C_BLOCK_DEVICE_NAME;
// global virtual mode needed for testing on x86 platform
bool I2C_VIRTUAL_MODE = 0;
static int getI2CSlaveListLength()
{
/*
* Return ONLY registred I2C slaves
*/
int i;
int addr;
int counter = 0;
int length = sizeof(I2C_SLAVE_ADDR_LIST) / sizeof(int);
for (i = 0; i < length; i++)
{
addr = I2C_SLAVE_ADDR_LIST[i];
if (addr != 0)
{
counter++;
}
}
return counter;
}
static int setRelayState(int command, int i2c_addr)
{
/*
* Set relays' state over I2C
*/
int file;
char filename[20];
if (I2C_VIRTUAL_MODE)
{
// we're in a virtual mode, likely on x86 platform or without I2C support
// simply do nothing
return 0;
}
// step 1: open device
file = open(I2C_BLOCK_DEVICE_NAME, O_RDWR);
if (file < 0)
{
/* ERROR HANDLING; you can check errno to see what went wrong */
printf("Error opening i2c device (0x%x).\n", i2c_addr);
exit(1);
}
// step 2: address the slave by its address
if (ioctl(file, I2C_SLAVE, i2c_addr) < 0)
{
/* ERROR HANDLING; you can check errno to see what went wrong */
printf("Error addressing i2c slave (0x%x).\n", i2c_addr);
exit(1);
}
// step 3: write command over I2c
__u8 reg = 0x10; /* Device register to access */
char buf[10];
buf[0] = reg;
buf[1] = command; //0x00 -all off, 0x0F - all 4 on
if (write(file, buf, 3) != 3)
{
/* ERROR HANDLING: i2c transaction failed */
printf("Error writing to i2c slave (0x%x).\n", i2c_addr);
}
close(file);
}
static int getDigitalInputState(int i2c_addr, char **digital_input)
{
/*
* get digital input state over I2C
*/
int file;
char filename[20];
// step 1: open device
file = open(I2C_BLOCK_DEVICE_NAME, O_RDWR);
if (file < 0)
{
/* ERROR HANDLING; you can check errno to see what went wrong */
printf("Error opening i2c device (0x%x).\n", i2c_addr);
exit(1);
}
// step 2: address the slave by its address
if (ioctl(file, I2C_SLAVE, i2c_addr) < 0)
{
/* ERROR HANDLING; you can check errno to see what went wrong */
printf("Error addressing i2c slave (0x%x).\n", i2c_addr);
exit(1);
}
// step 3: write command over I2c
__u8 read_reg = 0x20; /* Device register to access */
char read_buf[2];
read_buf[0] = read_reg;
if (write(file, read_buf, 1) != 1)
{
/* ERROR HANDLING: i2c transaction failed */
printf("Error writing to i2c slave (0x%x).\n", i2c_addr);
}
if (read(file, read_buf, 1) != 1)
{
/* ERROR HANDLING: i2c transaction failed */
printf("Error reading digital input from i2c slave (0x%x).\n", i2c_addr);
}
else
{
/* read_buf[0] contains the read byte */
*digital_input = &read_buf[0];
}
close(file);
}
static int getAnalogInputStateAIN(int i2c_addr, int **analog_input, uint8_t read_reg)
{
/*
* get digital input state over I2C
*/
int file;
char filename[20];
// step 1: open device
file = open(I2C_BLOCK_DEVICE_NAME, O_RDWR);
if (file < 0)
{
/* ERROR HANDLING; you can check errno to see what went wrong */
printf("Error opening i2c device (0x%x).\n", i2c_addr);
exit(1);
}
// step 2: address the slave by its address
if (ioctl(file, I2C_SLAVE, i2c_addr) < 0)
{
/* ERROR HANDLING; you can check errno to see what went wrong */
printf("Error addressing i2c slave (0x%x).\n", i2c_addr);
exit(1);
}
// step 3: write command over I2c
//__u8 read_reg = 0x30; /* Device register to access */
char read_buf[10];
read_buf[0] = read_reg;
if (write(file, read_buf, 1) != 1)
{
/* ERROR HANDLING: i2c transaction failed */
printf("Error writing to i2c slave (0x%x).\n", i2c_addr);
}
if (read(file, read_buf, 2) != 2)
{
/* ERROR HANDLING: i2c transaction failed */
printf("Error reading analog input from i2c slave (0x%x).\n", i2c_addr);
}
else
{
int analog_data = 0;
// based on https://github.com/OLIMEX/OLINUXINO/blob/master/SOFTWARE/A13/MOD-IO/main.c
// since ADC is 10 bit we need to read and convert accordingly 2 bytes
analog_data = read_buf[1];
analog_data <<= 8;
analog_data |= read_buf[0];
*analog_input = &analog_data;
}
close(file);
}
coupler/opc-ua-server/server.c
View file @ 3bab7efa
......@@ -24,7 +24,7 @@
#include <argp.h>
#include <string.h>
#include "common.h"
#include "mod_io_i2c.h"
// The default port of OPC-UA server
const int DEFAULT_OPC_UA_PORT = 4840;
......@@ -98,190 +98,6 @@ static error_t parse_opt(int key, char *arg, struct argp_state *state)
static struct argp argp = {options, parse_opt, args_doc, doc, 0, 0, 0};
// global relay state
uint8_t I2C_0_RELAYS_STATE = 0; // state of 4 relays at I2C slave 0
uint8_t I2C_1_RELAYS_STATE = 0; // state of 4 relays at I2C slave 1
// XXX: what if we have more than 2 MOd-IOs / I2C slaves, we need better structure
// the default addresses of MOD-IOs
static char *DEFAULT_I2C_0_ADDR = "0x58";
// the list of attached I2C slaves
const int DEFAULT_I2C_SLAVE_ADDR = 0x58;
// XXX: make dynamic array
int I2C_SLAVE_ADDR_LIST[] = {0, 0, 0, 0, 0};
// the block device at host machine
static char *DEFAULT_I2C_BLOCK_DEVICE_NAME = "/dev/i2c-1";
char *I2C_BLOCK_DEVICE_NAME;
// global virtual mode needed for testing on x86 platform
bool I2C_VIRTUAL_MODE = 0;
static int getI2CSlaveListLength()
{
/*
* Return ONLY registred I2C slaves
*/
int i;
int addr;
int counter = 0;
int length = sizeof(I2C_SLAVE_ADDR_LIST) / sizeof(int);
for (i = 0; i < length; i++)
{
addr = I2C_SLAVE_ADDR_LIST[i];
if (addr != 0)
{
counter++;
}
}
return counter;
}
static int setRelayState(int command, int i2c_addr)
{
/*
* Set relays' state over I2C
*/
int file;
char filename[20];
if (I2C_VIRTUAL_MODE)
{
// we're in a virtual mode, likely on x86 platform or without I2C support
// simply do nothing
return 0;
}
// step 1: open device
file = open(I2C_BLOCK_DEVICE_NAME, O_RDWR);
if (file < 0)
{
/* ERROR HANDLING; you can check errno to see what went wrong */
printf("Error opening i2c device (0x%x).\n", i2c_addr);
exit(1);
}
// step 2: address the slave by its address
if (ioctl(file, I2C_SLAVE, i2c_addr) < 0)
{
/* ERROR HANDLING; you can check errno to see what went wrong */
printf("Error addressing i2c slave (0x%x).\n", i2c_addr);
exit(1);
}
// step 3: write command over I2c
__u8 reg = 0x10; /* Device register to access */
char buf[10];
buf[0] = reg;
buf[1] = command; //0x00 -all off, 0x0F - all 4 on
if (write(file, buf, 3) != 3)
{
/* ERROR HANDLING: i2c transaction failed */
printf("Error writing to i2c slave (0x%x).\n", i2c_addr);
}
close(file);
}
static int getDigitalInputState(int i2c_addr, char **digital_input)
{
/*
* get digital input state over I2C
*/
int file;
char filename[20];
// step 1: open device
file = open(I2C_BLOCK_DEVICE_NAME, O_RDWR);
if (file < 0)
{
/* ERROR HANDLING; you can check errno to see what went wrong */
printf("Error opening i2c device (0x%x).\n", i2c_addr);
exit(1);
}
// step 2: address the slave by its address
if (ioctl(file, I2C_SLAVE, i2c_addr) < 0)
{
/* ERROR HANDLING; you can check errno to see what went wrong */
printf("Error addressing i2c slave (0x%x).\n", i2c_addr);
exit(1);
}
// step 3: write command over I2c
__u8 read_reg = 0x20; /* Device register to access */
char read_buf[2];
read_buf[0] = read_reg;
if (write(file, read_buf, 1) != 1)
{
/* ERROR HANDLING: i2c transaction failed */
printf("Error writing to i2c slave (0x%x).\n", i2c_addr);
}
if (read(file, read_buf, 1) != 1)
{
/* ERROR HANDLING: i2c transaction failed */
printf("Error reading digital input from i2c slave (0x%x).\n", i2c_addr);
}
else
{
/* read_buf[0] contains the read byte */
*digital_input = &read_buf[0];
}
close(file);
}
static int getAnalogInputStateAIN(int i2c_addr, int **analog_input, uint8_t read_reg)
{
/*
* get digital input state over I2C
*/
int file;
char filename[20];
// step 1: open device
file = open(I2C_BLOCK_DEVICE_NAME, O_RDWR);
if (file < 0)
{
/* ERROR HANDLING; you can check errno to see what went wrong */
printf("Error opening i2c device (0x%x).\n", i2c_addr);
exit(1);
}
// step 2: address the slave by its address
if (ioctl(file, I2C_SLAVE, i2c_addr) < 0)
{
/* ERROR HANDLING; you can check errno to see what went wrong */
printf("Error addressing i2c slave (0x%x).\n", i2c_addr);
exit(1);
}
// step 3: write command over I2c
//__u8 read_reg = 0x30; /* Device register to access */
char read_buf[10];
read_buf[0] = read_reg;
if (write(file, read_buf, 1) != 1)
{
/* ERROR HANDLING: i2c transaction failed */
printf("Error writing to i2c slave (0x%x).\n", i2c_addr);
}
if (read(file, read_buf, 2) != 2)
{
/* ERROR HANDLING: i2c transaction failed */
printf("Error reading analog input from i2c slave (0x%x).\n", i2c_addr);
}
else
{
int analog_data = 0;
// based on https://github.com/OLIMEX/OLINUXINO/blob/master/SOFTWARE/A13/MOD-IO/main.c
// since ADC is 10 bit we need to read and convert accordingly 2 bytes
analog_data = read_buf[1];
analog_data <<= 8;
analog_data |= read_buf[0];
*analog_input = &analog_data;
}
close(file);
}
void addIntegerVariableNode(UA_Server *server, char *node_id, char *node_description)
{
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7