Remove slapos.builder and slapos.monitor as it only contains dead code.

CHANGES.txt

 0.56 (2016-07-25)
 =================
 
-* slaprunner: remove create user at first launch, clone repository
-  can be done by slaprunner at startup.
+* slaprunner: remove create user at first launch, clone repository can be done by slaprunner at startup.
+* Remove slapos.builder and slapos.monitor as it only contains unused and dead code.
 
 0.55 (2016-03-01)
 =================

setup.py

@@ -82,12 +82,7 @@ setup(name=name,
           'pubsubserver = slapos.pubsub:main',
           'qemu-qmp-client = slapos.qemuqmpclient:main',
           'shacache = slapos.shacache:main',
-          'slapbuilder = slapos.builder:main',
-          'slapcontainer = slapos.container:main',
-          'slapmonitor = slapos.monitor:run_slapmonitor',
-          'slapmonitor-xml = slapos.monitor:run_slapmonitor_xml',
           'slapos-kill = slapos.systool:kill',
-          'slapreport = slapos.monitor:run_slapreport',
           'slaprunnertest = slapos.runner.runnertest:main',
           'slaprunnerteststandalone = slapos.runner.runnertest:runStandaloneUnitTest',
           'zodbpack = slapos.zodbpack:run [zodbpack]',

slapos/README.builder.rst

-builder
-=======
-
-builder is a program to install a slapos image.

slapos/builder/appliance/README.txt

-Mirror of files from http://susestudio.com/appliance/

slapos/builder/appliance/builds_end_script.sh

-#!/bin/bash
-##############################################################################
-#
-# Copyright (c) 2010 Vifib SARL and Contributors. All Rights Reserved.
-#
-# WARNING: This program as such is intended to be used by professional
-# programmers who take the whole responsibility of assessing all potential
-# consequences resulting from its eventual inadequacies and bugs
-# End users who are looking for a ready-to-use solution with commercial
-# guarantees and support are strongly advised to contract a Free Software
-# Service Company
-#
-# This program is Free Software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 3
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-##############################################################################
-#
-# This script is executed at the end of appliance creation.  Here you can do
-# one-time actions to modify your appliance before it is ever used, like
-# removing files and directories to make it smaller, creating symlinks,
-# generating indexes, etc.
-#
-# The 'kiwi_type' variable will contain the format of the appliance (oem =
-# disk image, vmx = VMware, iso = CD/DVD, xen = Xen).
-#
-
-# read in some variables
-. /studio/profile
-
-
-# Removing eth0 config file which became unecessary with the bridge creation
-rm -f /etc/sysconfig/network/ifcfg-eth0

slapos/builder/appliance/each_boot_script.sh

-#!/bin/bash
-### BEGIN INIT INFO
-# Provides: suse_studio_custom
-# Required-Start:
-# Required-Stop:
-# Default-Start:
-# Default-Stop:
-# Description: Script run whenever the appliance boots
-### END INIT INFO
-##############################################################################
-#
-# Copyright (c) 2010 Vifib SARL and Contributors. All Rights Reserved.
-#
-# WARNING: This program as such is intended to be used by professional
-# programmers who take the whole responsibility of assessing all potential
-# consequences resulting from its eventual inadequacies and bugs
-# End users who are looking for a ready-to-use solution with commercial
-# guarantees and support are strongly advised to contract a Free Software
-# Service Company
-#
-# This program is Free Software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 3
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-##############################################################################
-#
-# This script is executed whenever your appliance boots.  Here you can add
-# commands to be executed before the system enters the first runlevel.  This
-# could include loading kernel modules, starting daemons that aren't managed
-# by init files, asking questions at the console, etc.
-#
-# The 'kiwi_type' variable will contain the format of the appliance (oem =
-# disk image, vmx = VMware, iso = CD/DVD, xen = Xen).
-#
-#
-# read in some variables
-. /studio/profile
-
-if [ -f /etc/init.d/suse_studio_firstboot ]
-then
-    echo "______________Init of SlapOS service_______________"
-    /etc/init.d/slapos_firstboot    
-    systemctl enable slapos.service
-    systemctl start slapos.service
-elif [ -f /token_second_boot ]; then
-    /etc/init.d/slapos_secondboot
-fi

slapos/builder/script/slapos

-#!/bin/sh
-##############################################################################
-#
-# Copyright (c) 2010 Vifib SARL and Contributors. All Rights Reserved.
-#
-# WARNING: This program as such is intended to be used by professional
-# programmers who take the whole responsibility of assessing all potential
-# consequences resulting from its eventual inadequacies and bugs
-# End users who are looking for a ready-to-use solution with commercial
-# guarantees and support are strongly advised to contract a Free Software
-# Service Company
-#
-# This program is Free Software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 3
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-##############################################################################
-
-
-# clean the system
-for service in rpcbind network-remotefs postfix ; do
-  chkconfig --del $service
-  /etc/init.d/$service stop
-done
-
-IPV6CHECK=ipv6.google.com
-
-# Test ipv6 connectivity and if not working use openvpn 
-# and wait for it to be ready
-/etc/init.d/openvpn stop
-ping6 -c 2 $IPV6CHECK
-if [[ $? != 0 ]]; then
-    echo """ Starting openVPN """
-    /etc/init.d/openvpn start
-    ping6 -c 2 $IPV6CHECK
-    while [[ $? != 0 ]]; do
-        ping6 -c 2 $IPV6CHECK
-    done
-    # Ask slapos to use openvpn as ipv6 provider                                                                                                                       
-    if [ ! -f /etc/slapos/openvpn-needed ]; then
-        touch /etc/slapos/openvpn-needed
-        echo "ipv6_interface = tapVPN" >> /etc/slapos/slapos.cfg
-    fi
-else
-    # OpenVPN not needed delete last line of slapos.cfg if OpenVPN has been used before                                                                                     
-    if [ -f /etc/slapos/openvpn-needed ]; then
-        rm /etc/slapos/openvpn-needed
-        sed -i '$d' /etc/slapos/slapos.cfg
-    fi
-fi
-
-# set random root password
-pwgen -sync 512 1 | passwd --stdin root
-
-SLAP_INSTALL_LOG=/opt/slapos/slapos-install.log
-
-while :; do
-  if [ -f /opt/slapos/bin/slapformat ] && [ -f /opt/slapos/bin/bang ]; then
-    # slapos tools available, nothing to do
-    break
-  fi
-  # software not detected, force forever installation
-  echo -n "Installing SlapOS, log availble at ${SLAP_INSTALL_LOG}..."
-  mkdir -p /opt/slapos
-  (python -S -c \
-    'import urllib2;print urllib2.urlopen("http://svn.zope.org/*checkout*/zc.buildout/trunk/bootstrap/bootstrap.py").read()' \
-    | python -S - -c /etc/slapos/software.cfg buildout:directory=/opt/slapos \
-    >> ${SLAP_INSTALL_LOG} 2>&1 && /opt/slapos/bin/buildout -c \
-    /etc/slapos/software.cfg buildout:directory=/opt/slapos >> \
-    ${SLAP_INSTALL_LOG} 2>&1 ) && (echo "done.") || (echo \
-    "failed, retrying, the last error was:." ; tail -n 20 ${SLAP_INSTALL_LOG} ; rm -f /opt/slapos/bin/slapformat)
-done
-
-# Create PKI repository
-repo=`egrep ^certificate_repository_path /etc/slapos/slapos.cfg | sed 's/^certificate_repository_path.*= *//'`
-mkdir -v -p -m 0755 $repo
-
-# software detected, ready to run
-# Set up cron
-echo """# BEWARE: This file will be automatically regenerated on each boot
-SHELL=/bin/sh
-PATH=/usr/bin:/usr/sbin:/sbin:/bin:/usr/lib/news/bin
-MAILTO=root
-0 0 * * * root /opt/slapos/bin/slapformat --verbose --log_file=/opt/slapos/slapformat.log /etc/slapos/slapos.cfg >> /opt/slapos/slapformat.log 2>&1
-*/5 * * * * root /opt/slapos/bin/slapgrid-cp --verbose --logfile=/opt/slapos/slapgrid-cp.log --pidfile=/opt/slapos/slapgrid-cp.pid /etc/slapos/slapos.cfg >> /opt/slapos/slapgrid-cp.log 2>&1
-*/5 * * * * root /opt/slapos/bin/slapgrid-sr --verbose --logfile=/opt/slapos/slapgrid-sr.log --pidfile=/opt/slapos/slapgrid-sr.pid /etc/slapos/slapos.cfg >> /opt/slapos/slapgrid-sr.log 2>&1
-0 0 * * * root /opt/slapos/bin/slapgrid-ur --verbose --logfile=/opt/slapos/slapgrid-ur.log --pidfile=/opt/slapos/slapgrid-ur.pid /etc/slapos/slapos.cfg >> /opt/slapos/slapgrid-ur.log 2>&1
-""" > /etc/cron.d/slapos
-
-# Setup more server like network parameters in order to avoid
-#    "Neighbour table overflow."
-# Those machines are itself has a lot of interfaces and are in
-# heavily networked environment, so limit of ARP cache for IPv4
-# and IPv6 is 4x higher then default
-# More tuning can be applied from: http://www.enigma.id.au/linux_tuning.txt
-sysctl -w \
-  net.ipv4.neigh.default.gc_thresh1=512 \
-  net.ipv4.neigh.default.gc_thresh2=1024 \
-  net.ipv4.neigh.default.gc_thresh3=2048 \
-  net.ipv6.neigh.default.gc_thresh1=512 \
-  net.ipv6.neigh.default.gc_thresh2=1024 \
-  net.ipv6.neigh.default.gc_thresh3=2048
-
-# Execute slapformat
-echo -n "Running slapformat..."
-/opt/slapos/bin/slapformat --verbose --console /etc/slapos/slapos.cfg
-echo "done."
-echo -n "Banging..."
-/opt/slapos/bin/bang -m "Rebooted" /etc/slapos/slapos.cfg
-echo "done."
-
-# Enable noop scheduler for disk which have SLAPOS labeled partition
-disk=`blkid -L SLAPOS | sed -r -e 's/(\/dev\/|[0-9]*$)//g'`
-echo noop > /sys/block/$disk/queue/scheduler
-
-# Set kvm up
-modprobe kvm_intel
-chmod 666 /dev/kvm
\ No newline at end of file

slapos/builder/script/slapos.service

-[Unit]
-Description=SlapOs Boot script
-Requires=basic.target
-Wants=network.target remote-fs.target
-After=basic.target network.target remote-fs.target
-
-
-[Service]
-Type=simple
-ExecStart=/etc/slapos/slapos
-StandardOutput=tty
-TTYPath=/dev/console
-
-[Install]
-WantedBy=multi-user.target

slapos/builder/template/hosts.in

-#
-# hosts         This file describes a number of hostname-to-address
-#               mappings for the TCP/IP subsystem.  It is mostly
-#               used at boot time, when no name servers are running.
-#               On small systems, this file can be used instead of a
-#               "named" name server.
-# Syntax:
-#    
-# IP-Address  Full-Qualified-Hostname  Short-Hostname
-#
-
-127.0.0.1	%(computer_id)s localhost
-
-# special IPv6 addresses
-::1             %(computer_id)s localhost ipv6-localhost ipv6-loopback
-
-fe00::0         ipv6-localnet
-
-ff00::0         ipv6-mcastprefix
-ff02::1         ipv6-allnodes
-ff02::2         ipv6-allrouters
-ff02::3         ipv6-allhosts
-

slapos/builder/template/ifcfg-br0.in

-BOOTPROTO='dhcp'
-BRIDGE='yes'
-BRIDGE_FORWARDDELAY='0'
-BRIDGE_PORTS='eth0'
-BRIDGE_STP='off'
-BROADCAST=''
-ETHTOOL_OPTIONS=''
-IPADDR=''
-MTU=''
-NAME=''
-NETMASK=''
-NETWORK=''
-REMOTE_IPADDR=''
-STARTMODE='auto'
-USERCONTROL='no'

slapos/builder/template/slapos.cfg.in

-[slapos]
-software_root = /opt/slapgrid
-instance_root = /srv/slapgrid
-master_url = %(master_url)s
-computer_id = %(computer_id)s
-key_file = %(key_file)s
-cert_file = %(cert_file)s
-certificate_repository_path = %(certificate_repository_path)s
-
-[slapformat]
-computer_xml = /opt/slapos/slapos.xml
-partition_amount = 100
-bridge_name = br0
-partition_base_name = slappart
-user_base_name = slapuser
-tap_base_name = slaptap
-ipv4_local_network = 10.0.0.0/16

slapos/builder/template/sshd_config.in

-PermitRootLogin yes
-AllowUsers root
-AddressFamily inet6
-
-RSAAuthentication yes
-PubkeyAuthentication yes
-#AuthorizedKeysFile %h/.ssh/authorized_keys
-
-# To enable empty passwords, change to yes (NOT RECOMMENDED)
-PermitEmptyPasswords no
-
-PasswordAuthentication no
-
-X11Forwarding yes
-
-AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
-AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
-AcceptEnv LC_IDENTIFICATION LC_ALL
-
-Subsystem       sftp    /usr/lib64/ssh/sftp-server
-
-UsePAM yes