NFC: port100: Commands mechanism implementation

This patch implements the command handling mechanism. The digital stack
serializes all commands sent to the driver. This means that the digital
stack waits for the reply of the current command before sending a new
one. So there is no command queue managed at driver level.

All Port-100 commands are asynchronous. If the command has been sent
successfully to the device, it replies with an ACK frame. Then the
command response is received (or actually no-response in case of
timeout or error) and a command complete work on the system workqueue
is responsible for sending the response (or the error) back to the
digital stack.

The digital stack requires some commands to be synchronous, mainly
hardware configuration ones. These commands use the asynchronous
command path but are made synchronous by using a completion object.
Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Cc: Stephen Tiedemann <stephen.tiedemann@gmail.com>
Tested-by: Cho, Yu-Chen <acho@suse.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

drivers/nfc/port100.c

@@ -32,6 +32,57 @@
 #define PORT100_CAPABILITIES (NFC_DIGITAL_DRV_CAPS_IN_CRC | \
 			      NFC_DIGITAL_DRV_CAPS_TG_CRC)
 
+/* Standard port100 frame definitions */
+#define PORT100_FRAME_HEADER_LEN (sizeof(struct port100_frame) \
+				  + 2) /* data[0] CC, data[1] SCC */
+#define PORT100_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/
+
+#define PORT100_COMM_RF_HEAD_MAX_LEN (sizeof(struct port100_tg_comm_rf_cmd))
+
+/*
+ * Max extended frame payload len, excluding CC and SCC
+ * which are already in PORT100_FRAME_HEADER_LEN.
+ */
+#define PORT100_FRAME_MAX_PAYLOAD_LEN 1001
+
+#define PORT100_FRAME_ACK_SIZE 6 /* Preamble (1), SoPC (2), ACK Code (2),
+				    Postamble (1) */
+static u8 ack_frame[PORT100_FRAME_ACK_SIZE] = {
+	0x00, 0x00, 0xff, 0x00, 0xff, 0x00
+};
+
+#define PORT100_FRAME_CHECKSUM(f) (f->data[le16_to_cpu(f->datalen)])
+#define PORT100_FRAME_POSTAMBLE(f) (f->data[le16_to_cpu(f->datalen) + 1])
+
+/* start of frame */
+#define PORT100_FRAME_SOF	0x00FF
+#define PORT100_FRAME_EXT	0xFFFF
+#define PORT100_FRAME_ACK	0x00FF
+
+/* Port-100 command: in or out */
+#define PORT100_FRAME_DIRECTION(f) (f->data[0]) /* CC */
+#define PORT100_FRAME_DIR_OUT 0xD6
+#define PORT100_FRAME_DIR_IN  0xD7
+
+/* Port-100 sub-command */
+#define PORT100_FRAME_CMD(f) (f->data[1]) /* SCC */
+
+#define PORT100_CMD_GET_FIRMWARE_VERSION 0x20
+#define PORT100_CMD_GET_COMMAND_TYPE     0x28
+#define PORT100_CMD_SET_COMMAND_TYPE     0x2A
+
+#define PORT100_CMD_RESPONSE(cmd) (cmd + 1)
+
+#define PORT100_CMD_TYPE_IS_SUPPORTED(mask, cmd_type) \
+	((mask) & (0x01 << (cmd_type)))
+#define PORT100_CMD_TYPE_0	0
+#define PORT100_CMD_TYPE_1	1
+
+struct port100;
+
+typedef void (*port100_send_async_complete_t)(struct port100 *dev, void *arg,
+					      struct sk_buff *resp);
+
 struct port100 {
 	struct nfc_digital_dev *nfc_digital_dev;
 
@@ -40,10 +91,537 @@ struct port100 {
 
 	struct usb_device *udev;
 	struct usb_interface *interface;
+
+	struct urb *out_urb;
+	struct urb *in_urb;
+
+	struct work_struct cmd_complete_work;
+
+	u8 cmd_type;
+
+	/* The digital stack serializes commands to be sent. There is no need
+	 * for any queuing/locking mechanism at driver level.
+	 */
+	struct port100_cmd *cmd;
+};
+
+struct port100_cmd {
+	u8 code;
+	int status;
+	struct sk_buff *req;
+	struct sk_buff *resp;
+	int resp_len;
+	port100_send_async_complete_t  complete_cb;
+	void *complete_cb_context;
+};
+
+struct port100_frame {
+	u8 preamble;
+	__be16 start_frame;
+	__be16 extended_frame;
+	__le16 datalen;
+	u8 datalen_checksum;
+	u8 data[];
+} __packed;
+
+struct port100_ack_frame {
+	u8 preamble;
+	__be16 start_frame;
+	__be16 ack_frame;
+	u8 postambule;
+} __packed;
+
+struct port100_cb_arg {
+	nfc_digital_cmd_complete_t complete_cb;
+	void *complete_arg;
+	u8 mdaa;
+};
+
+struct port100_tg_comm_rf_cmd {
+	__le16 guard_time;
+	__le16 send_timeout;
+	u8 mdaa;
+	u8 nfca_param[6];
+	u8 nfcf_param[18];
+	u8 mf_halted;
+	u8 arae_flag;
+	__le16 recv_timeout;
+	u8 data[];
+} __packed;
+
+/* The rule: value + checksum = 0 */
+static inline u8 port100_checksum(u16 value)
+{
+	return ~(((u8 *)&value)[0] + ((u8 *)&value)[1]) + 1;
+}
+
+/* The rule: sum(data elements) + checksum = 0 */
+static u8 port100_data_checksum(u8 *data, int datalen)
+{
+	u8 sum = 0;
+	int i;
+
+	for (i = 0; i < datalen; i++)
+		sum += data[i];
+
+	return port100_checksum(sum);
+}
+
+static void port100_tx_frame_init(void *_frame, u8 cmd_code)
+{
+	struct port100_frame *frame = _frame;
+
+	frame->preamble = 0;
+	frame->start_frame = cpu_to_be16(PORT100_FRAME_SOF);
+	frame->extended_frame = cpu_to_be16(PORT100_FRAME_EXT);
+	PORT100_FRAME_DIRECTION(frame) = PORT100_FRAME_DIR_OUT;
+	PORT100_FRAME_CMD(frame) = cmd_code;
+	frame->datalen = cpu_to_le16(2);
+}
+
+static void port100_tx_frame_finish(void *_frame)
+{
+	struct port100_frame *frame = _frame;
+
+	frame->datalen_checksum = port100_checksum(le16_to_cpu(frame->datalen));
+
+	PORT100_FRAME_CHECKSUM(frame) =
+		port100_data_checksum(frame->data, le16_to_cpu(frame->datalen));
+
+	PORT100_FRAME_POSTAMBLE(frame) = 0;
+}
+
+static void port100_tx_update_payload_len(void *_frame, int len)
+{
+	struct port100_frame *frame = _frame;
+
+	frame->datalen = cpu_to_le16(le16_to_cpu(frame->datalen) + len);
+}
+
+static bool port100_rx_frame_is_valid(void *_frame)
+{
+	u8 checksum;
+	struct port100_frame *frame = _frame;
+
+	if (frame->start_frame != cpu_to_be16(PORT100_FRAME_SOF) ||
+	    frame->extended_frame != cpu_to_be16(PORT100_FRAME_EXT))
+		return false;
+
+	checksum = port100_checksum(le16_to_cpu(frame->datalen));
+	if (checksum != frame->datalen_checksum)
+		return false;
+
+	checksum = port100_data_checksum(frame->data,
+					 le16_to_cpu(frame->datalen));
+	if (checksum != PORT100_FRAME_CHECKSUM(frame))
+		return false;
+
+	return true;
+}
+
+static bool port100_rx_frame_is_ack(struct port100_ack_frame *frame)
+{
+	return (frame->start_frame == cpu_to_be16(PORT100_FRAME_SOF) &&
+		frame->ack_frame == cpu_to_be16(PORT100_FRAME_ACK));
+}
+
+static inline int port100_rx_frame_size(void *frame)
+{
+	struct port100_frame *f = frame;
+
+	return sizeof(struct port100_frame) + le16_to_cpu(f->datalen) +
+	       PORT100_FRAME_TAIL_LEN;
+}
+
+static bool port100_rx_frame_is_cmd_response(struct port100 *dev, void *frame)
+{
+	struct port100_frame *f = frame;
+
+	return (PORT100_FRAME_CMD(f) == PORT100_CMD_RESPONSE(dev->cmd->code));
+}
+
+static void port100_recv_response(struct urb *urb)
+{
+	struct port100 *dev = urb->context;
+	struct port100_cmd *cmd = dev->cmd;
+	u8 *in_frame;
+
+	cmd->status = urb->status;
+
+	switch (urb->status) {
+	case 0:
+		break; /* success */
+	case -ECONNRESET:
+	case -ENOENT:
+		nfc_err(&dev->interface->dev,
+			"The urb has been canceled (status %d)", urb->status);
+		goto sched_wq;
+	case -ESHUTDOWN:
+	default:
+		nfc_err(&dev->interface->dev, "Urb failure (status %d)",
+			urb->status);
+		goto sched_wq;
+	}
+
+	in_frame = dev->in_urb->transfer_buffer;
+
+	if (!port100_rx_frame_is_valid(in_frame)) {
+		nfc_err(&dev->interface->dev, "Received an invalid frame");
+		cmd->status = -EIO;
+		goto sched_wq;
+	}
+
+	print_hex_dump_debug("PORT100 RX: ", DUMP_PREFIX_NONE, 16, 1, in_frame,
+			     port100_rx_frame_size(in_frame), false);
+
+	if (!port100_rx_frame_is_cmd_response(dev, in_frame)) {
+		nfc_err(&dev->interface->dev,
+			"It's not the response to the last command");
+		cmd->status = -EIO;
+		goto sched_wq;
+	}
+
+sched_wq:
+	schedule_work(&dev->cmd_complete_work);
+}
+
+static int port100_submit_urb_for_response(struct port100 *dev, gfp_t flags)
+{
+	dev->in_urb->complete = port100_recv_response;
+
+	return usb_submit_urb(dev->in_urb, flags);
+}
+
+static void port100_recv_ack(struct urb *urb)
+{
+	struct port100 *dev = urb->context;
+	struct port100_cmd *cmd = dev->cmd;
+	struct port100_ack_frame *in_frame;
+	int rc;
+
+	cmd->status = urb->status;
+
+	switch (urb->status) {
+	case 0:
+		break; /* success */
+	case -ECONNRESET:
+	case -ENOENT:
+		nfc_err(&dev->interface->dev,
+			"The urb has been stopped (status %d)", urb->status);
+		goto sched_wq;
+	case -ESHUTDOWN:
+	default:
+		nfc_err(&dev->interface->dev, "Urb failure (status %d)",
+			urb->status);
+		goto sched_wq;
+	}
+
+	in_frame = dev->in_urb->transfer_buffer;
+
+	if (!port100_rx_frame_is_ack(in_frame)) {
+		nfc_err(&dev->interface->dev, "Received an invalid ack");
+		cmd->status = -EIO;
+		goto sched_wq;
+	}
+
+	rc = port100_submit_urb_for_response(dev, GFP_ATOMIC);
+	if (rc) {
+		nfc_err(&dev->interface->dev,
+			"usb_submit_urb failed with result %d", rc);
+		cmd->status = rc;
+		goto sched_wq;
+	}
+
+	return;
+
+sched_wq:
+	schedule_work(&dev->cmd_complete_work);
+}
+
+static int port100_submit_urb_for_ack(struct port100 *dev, gfp_t flags)
+{
+	dev->in_urb->complete = port100_recv_ack;
+
+	return usb_submit_urb(dev->in_urb, flags);
+}
+
+static int port100_send_ack(struct port100 *dev)
+{
+	int rc;
+
+	dev->out_urb->transfer_buffer = ack_frame;
+	dev->out_urb->transfer_buffer_length = sizeof(ack_frame);
+	rc = usb_submit_urb(dev->out_urb, GFP_KERNEL);
+
+	return rc;
+}
+
+static int port100_send_frame_async(struct port100 *dev, struct sk_buff *out,
+				    struct sk_buff *in, int in_len)
+{
+	int rc;
+
+	dev->out_urb->transfer_buffer = out->data;
+	dev->out_urb->transfer_buffer_length = out->len;
+
+	dev->in_urb->transfer_buffer = in->data;
+	dev->in_urb->transfer_buffer_length = in_len;
+
+	print_hex_dump_debug("PORT100 TX: ", DUMP_PREFIX_NONE, 16, 1,
+			     out->data, out->len, false);
+
+	rc = usb_submit_urb(dev->out_urb, GFP_KERNEL);
+	if (rc)
+		return rc;
+
+	rc = port100_submit_urb_for_ack(dev, GFP_KERNEL);
+	if (rc)
+		goto error;
+
+	return 0;
+
+error:
+	usb_unlink_urb(dev->out_urb);
+	return rc;
+}
+
+static void port100_build_cmd_frame(struct port100 *dev, u8 cmd_code,
+				    struct sk_buff *skb)
+{
+	/* payload is already there, just update datalen */
+	int payload_len = skb->len;
+
+	skb_push(skb, PORT100_FRAME_HEADER_LEN);
+	skb_put(skb, PORT100_FRAME_TAIL_LEN);
+
+	port100_tx_frame_init(skb->data, cmd_code);
+	port100_tx_update_payload_len(skb->data, payload_len);
+	port100_tx_frame_finish(skb->data);
+}
+
+static void port100_send_async_complete(struct port100 *dev)
+{
+	struct port100_cmd *cmd = dev->cmd;
+	int status = cmd->status;
+
+	struct sk_buff *req = cmd->req;
+	struct sk_buff *resp = cmd->resp;
+
+	dev_kfree_skb(req);
+
+	dev->cmd = NULL;
+
+	if (status < 0) {
+		cmd->complete_cb(dev, cmd->complete_cb_context,
+				 ERR_PTR(status));
+		dev_kfree_skb(resp);
+		goto done;
+	}
+
+	skb_put(resp, port100_rx_frame_size(resp->data));
+	skb_pull(resp, PORT100_FRAME_HEADER_LEN);
+	skb_trim(resp, resp->len - PORT100_FRAME_TAIL_LEN);
+
+	cmd->complete_cb(dev, cmd->complete_cb_context, resp);
+
+done:
+	kfree(cmd);
+}
+
+static int port100_send_cmd_async(struct port100 *dev, u8 cmd_code,
+				struct sk_buff *req,
+				port100_send_async_complete_t complete_cb,
+				void *complete_cb_context)
+{
+	struct port100_cmd *cmd;
+	struct sk_buff *resp;
+	int rc;
+	int  resp_len = PORT100_FRAME_HEADER_LEN +
+			PORT100_FRAME_MAX_PAYLOAD_LEN +
+			PORT100_FRAME_TAIL_LEN;
+
+	resp = alloc_skb(resp_len, GFP_KERNEL);
+	if (!resp)
+		return -ENOMEM;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		dev_kfree_skb(resp);
+		return -ENOMEM;
+	}
+
+	cmd->code = cmd_code;
+	cmd->req = req;
+	cmd->resp = resp;
+	cmd->resp_len = resp_len;
+	cmd->complete_cb = complete_cb;
+	cmd->complete_cb_context = complete_cb_context;
+
+	port100_build_cmd_frame(dev, cmd_code, req);
+
+	dev->cmd = cmd;
+
+	rc = port100_send_frame_async(dev, req, resp, resp_len);
+	if (rc) {
+		kfree(cmd);
+		dev_kfree_skb(resp);
+		dev->cmd = NULL;
+	}
+
+	return rc;
+}
+
+struct port100_sync_cmd_response {
+	struct sk_buff *resp;
+	struct completion done;
 };
 
+static void port100_wq_cmd_complete(struct work_struct *work)
+{
+	struct port100 *dev = container_of(work, struct port100,
+					   cmd_complete_work);
+
+	port100_send_async_complete(dev);
+}
+
+static void port100_send_sync_complete(struct port100 *dev, void *_arg,
+				      struct sk_buff *resp)
+{
+	struct port100_sync_cmd_response *arg = _arg;
+
+	arg->resp = resp;
+	complete(&arg->done);
+}
+
+static struct sk_buff *port100_send_cmd_sync(struct port100 *dev, u8 cmd_code,
+					     struct sk_buff *req)
+{
+	int rc;
+	struct port100_sync_cmd_response arg;
+
+	init_completion(&arg.done);
+
+	rc = port100_send_cmd_async(dev, cmd_code, req,
+				    port100_send_sync_complete, &arg);
+	if (rc) {
+		dev_kfree_skb(req);
+		return ERR_PTR(rc);
+	}
+
+	wait_for_completion(&arg.done);
+
+	return arg.resp;
+}
+
+static void port100_send_complete(struct urb *urb)
+{
+	struct port100 *dev = urb->context;
+
+	switch (urb->status) {
+	case 0:
+		break; /* success */
+	case -ECONNRESET:
+	case -ENOENT:
+		nfc_err(&dev->interface->dev,
+			"The urb has been stopped (status %d)", urb->status);
+		break;
+	case -ESHUTDOWN:
+	default:
+		nfc_err(&dev->interface->dev, "Urb failure (status %d)",
+			urb->status);
+	}
+}
+
 static void port100_abort_cmd(struct nfc_digital_dev *ddev)
 {
+	struct port100 *dev = nfc_digital_get_drvdata(ddev);
+
+	/* An ack will cancel the last issued command */
+	port100_send_ack(dev);
+
+	/* cancel the urb request */
+	usb_kill_urb(dev->in_urb);
+}
+
+static struct sk_buff *port100_alloc_skb(struct port100 *dev, unsigned int size)
+{
+	struct sk_buff *skb;
+
+	skb = alloc_skb(dev->skb_headroom + dev->skb_tailroom + size,
+			GFP_KERNEL);
+	if (skb)
+		skb_reserve(skb, dev->skb_headroom);
+
+	return skb;
+}
+
+static int port100_set_command_type(struct port100 *dev, u8 command_type)
+{
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+	int rc;
+
+	skb = port100_alloc_skb(dev, 1);
+	if (!skb)
+		return -ENOMEM;
+
+	*skb_put(skb, sizeof(u8)) = command_type;
+
+	resp = port100_send_cmd_sync(dev, PORT100_CMD_SET_COMMAND_TYPE, skb);
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	rc = resp->data[0];
+
+	dev_kfree_skb(resp);
+
+	return rc;
+}
+
+static u64 port100_get_command_type_mask(struct port100 *dev)
+{
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+	u64 mask;
+
+	skb = port100_alloc_skb(dev, 0);
+	if (!skb)
+		return -ENOMEM;
+
+	resp = port100_send_cmd_sync(dev, PORT100_CMD_GET_COMMAND_TYPE, skb);
+	if (IS_ERR(resp))
+		return PTR_ERR(resp);
+
+	if (resp->len < 8)
+		mask = 0;
+	else
+		mask = be64_to_cpu(*(__be64 *)resp->data);
+
+	dev_kfree_skb(resp);
+
+	return mask;
+}
+
+static u16 port100_get_firmware_version(struct port100 *dev)
+{
+	struct sk_buff *skb;
+	struct sk_buff *resp;
+	u16 fw_ver;
+
+	skb = port100_alloc_skb(dev, 0);
+	if (!skb)
+		return 0;
+
+	resp = port100_send_cmd_sync(dev, PORT100_CMD_GET_FIRMWARE_VERSION,
+				     skb);
+	if (IS_ERR(resp))
+		return 0;
+
+	fw_ver = le16_to_cpu(*(__le16 *)resp->data);
+
+	dev_kfree_skb(resp);
+
+	return fw_ver;
 }
 
 static int port100_switch_rf(struct nfc_digital_dev *ddev, bool on)
@@ -118,6 +696,13 @@ static int port100_probe(struct usb_interface *interface,
 {
 	struct port100 *dev;
 	int rc;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	int in_endpoint;
+	int out_endpoint;
+	u16 fw_version;
+	u64 cmd_type_mask;
+	int i;
 
 	dev = devm_kzalloc(&interface->dev, sizeof(struct port100), GFP_KERNEL);
 	if (!dev)
@@ -127,7 +712,79 @@ static int port100_probe(struct usb_interface *interface,
 	dev->interface = interface;
 	usb_set_intfdata(interface, dev);
 
-	nfc_info(&interface->dev, "Sony NFC Port-100 Series attached\n");
+	in_endpoint = out_endpoint = 0;
+	iface_desc = interface->cur_altsetting;
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+		endpoint = &iface_desc->endpoint[i].desc;
+
+		if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint))
+			in_endpoint = endpoint->bEndpointAddress;
+
+		if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint))
+			out_endpoint = endpoint->bEndpointAddress;
+	}
+
+	if (!in_endpoint || !out_endpoint) {
+		nfc_err(&interface->dev,
+			"Could not find bulk-in or bulk-out endpoint\n");
+		rc = -ENODEV;
+		goto error;
+	}
+
+	dev->in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	dev->out_urb = usb_alloc_urb(0, GFP_KERNEL);
+
+	if (!dev->in_urb || !dev->out_urb) {
+		nfc_err(&interface->dev, "Could not allocate USB URBs\n");
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	usb_fill_bulk_urb(dev->in_urb, dev->udev,
+			  usb_rcvbulkpipe(dev->udev, in_endpoint),
+			  NULL, 0, NULL, dev);
+	usb_fill_bulk_urb(dev->out_urb, dev->udev,
+			  usb_sndbulkpipe(dev->udev, out_endpoint),
+			  NULL, 0, port100_send_complete, dev);
+
+	dev->skb_headroom = PORT100_FRAME_HEADER_LEN +
+			    PORT100_COMM_RF_HEAD_MAX_LEN;
+	dev->skb_tailroom = PORT100_FRAME_TAIL_LEN;
+
+	INIT_WORK(&dev->cmd_complete_work, port100_wq_cmd_complete);
+
+	/* The first thing to do with the Port-100 is to set the command type
+	 * to be used. If supported we use command type 1. 0 otherwise.
+	 */
+	cmd_type_mask = port100_get_command_type_mask(dev);
+	if (!cmd_type_mask) {
+		nfc_err(&interface->dev,
+			"Could not get supported command types.\n");
+		rc = -ENODEV;
+		goto error;
+	}
+
+	if (PORT100_CMD_TYPE_IS_SUPPORTED(cmd_type_mask, PORT100_CMD_TYPE_1))
+		dev->cmd_type = PORT100_CMD_TYPE_1;
+	else
+		dev->cmd_type = PORT100_CMD_TYPE_0;
+
+	rc = port100_set_command_type(dev, dev->cmd_type);
+	if (rc) {
+		nfc_err(&interface->dev,
+			"The device does not support command type %u.\n",
+			dev->cmd_type);
+		goto error;
+	}
+
+	fw_version = port100_get_firmware_version(dev);
+	if (!fw_version)
+		nfc_err(&interface->dev,
+			"Could not get device firmware version.\n");
+
+	nfc_info(&interface->dev,
+		 "Sony NFC Port-100 Series attached (firmware v%x.%02x)\n",
+		 (fw_version & 0xFF00) >> 8, fw_version & 0xFF);
 
 	dev->nfc_digital_dev = nfc_digital_allocate_device(&port100_digital_ops,
 							   PORT100_PROTOCOLS,
@@ -157,6 +814,10 @@ static int port100_probe(struct usb_interface *interface,
 	nfc_digital_free_device(dev->nfc_digital_dev);
 
 error:
+	usb_free_urb(dev->in_urb);
+	usb_free_urb(dev->out_urb);
+	usb_put_dev(dev->udev);
+
 	return rc;
 }
 
@@ -170,6 +831,14 @@ static void port100_disconnect(struct usb_interface *interface)
 	nfc_digital_unregister_device(dev->nfc_digital_dev);
 	nfc_digital_free_device(dev->nfc_digital_dev);
 
+	usb_kill_urb(dev->in_urb);
+	usb_kill_urb(dev->out_urb);
+
+	usb_free_urb(dev->in_urb);
+	usb_free_urb(dev->out_urb);
+
+	kfree(dev->cmd);
+
 	nfc_info(&interface->dev, "Sony Port-100 NFC device disconnected");
 }