Merge branch 'wireguard-patches-for-5-19-rc6'

Jason A. Donenfeld says:

====================
wireguard patches for 5.19-rc6

1) A few small fixups to the selftests, per usual. Of particular note is
   a fix for a test flake that occurred on especially fast systems that
   boot in less than a second.

2) An addition during this cycle of some s390 crypto interacted with the
   way wireguard selects dependencies, resulting in linker errors
   reported by the kernel test robot. So Vladis sent in a patch for
   that, which also required a small preparatory fix moving some Kconfig
   symbols around.
====================

Link: https://lore.kernel.org/r/20220707003157.526645-1-Jason@zx2c4.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

crypto/Kconfig

@@ -666,6 +666,18 @@ config CRYPTO_CRC32_MIPS
 	  CRC32c and CRC32 CRC algorithms implemented using mips crypto
 	  instructions, when available.
 
+config CRYPTO_CRC32_S390
+	tristate "CRC-32 algorithms"
+	depends on S390
+	select CRYPTO_HASH
+	select CRC32
+	help
+	  Select this option if you want to use hardware accelerated
+	  implementations of CRC algorithms.  With this option, you
+	  can optimize the computation of CRC-32 (IEEE 802.3 Ethernet)
+	  and CRC-32C (Castagnoli).
+
+	  It is available with IBM z13 or later.
 
 config CRYPTO_XXHASH
 	tristate "xxHash hash algorithm"
@@ -898,6 +910,16 @@ config CRYPTO_SHA512_SSSE3
 	  Extensions version 1 (AVX1), or Advanced Vector Extensions
 	  version 2 (AVX2) instructions, when available.
 
+config CRYPTO_SHA512_S390
+	tristate "SHA384 and SHA512 digest algorithm"
+	depends on S390
+	select CRYPTO_HASH
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  SHA512 secure hash standard.
+
+	  It is available as of z10.
+
 config CRYPTO_SHA1_OCTEON
 	tristate "SHA1 digest algorithm (OCTEON)"
 	depends on CPU_CAVIUM_OCTEON
@@ -930,6 +952,16 @@ config CRYPTO_SHA1_PPC_SPE
 	  SHA-1 secure hash standard (DFIPS 180-4) implemented
 	  using powerpc SPE SIMD instruction set.
 
+config CRYPTO_SHA1_S390
+	tristate "SHA1 digest algorithm"
+	depends on S390
+	select CRYPTO_HASH
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
+
+	  It is available as of z990.
+
 config CRYPTO_SHA256
 	tristate "SHA224 and SHA256 digest algorithm"
 	select CRYPTO_HASH
@@ -970,6 +1002,16 @@ config CRYPTO_SHA256_SPARC64
 	  SHA-256 secure hash standard (DFIPS 180-2) implemented
 	  using sparc64 crypto instructions, when available.
 
+config CRYPTO_SHA256_S390
+	tristate "SHA256 digest algorithm"
+	depends on S390
+	select CRYPTO_HASH
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  SHA256 secure hash standard (DFIPS 180-2).
+
+	  It is available as of z9.
+
 config CRYPTO_SHA512
 	tristate "SHA384 and SHA512 digest algorithms"
 	select CRYPTO_HASH
@@ -1010,6 +1052,26 @@ config CRYPTO_SHA3
 	  References:
 	  http://keccak.noekeon.org/
 
+config CRYPTO_SHA3_256_S390
+	tristate "SHA3_224 and SHA3_256 digest algorithm"
+	depends on S390
+	select CRYPTO_HASH
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  SHA3_256 secure hash standard.
+
+	  It is available as of z14.
+
+config CRYPTO_SHA3_512_S390
+	tristate "SHA3_384 and SHA3_512 digest algorithm"
+	depends on S390
+	select CRYPTO_HASH
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  SHA3_512 secure hash standard.
+
+	  It is available as of z14.
+
 config CRYPTO_SM3
 	tristate
 
@@ -1070,6 +1132,16 @@ config CRYPTO_GHASH_CLMUL_NI_INTEL
 	  This is the x86_64 CLMUL-NI accelerated implementation of
 	  GHASH, the hash function used in GCM (Galois/Counter mode).
 
+config CRYPTO_GHASH_S390
+	tristate "GHASH hash function"
+	depends on S390
+	select CRYPTO_HASH
+	help
+	  This is the s390 hardware accelerated implementation of GHASH,
+	  the hash function used in GCM (Galois/Counter mode).
+
+	  It is available as of z196.
+
 comment "Ciphers"
 
 config CRYPTO_AES
@@ -1185,6 +1257,23 @@ config CRYPTO_AES_PPC_SPE
 	  architecture specific assembler implementations that work on 1KB
 	  tables or 256 bytes S-boxes.
 
+config CRYPTO_AES_S390
+	tristate "AES cipher algorithms"
+	depends on S390
+	select CRYPTO_ALGAPI
+	select CRYPTO_SKCIPHER
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  AES cipher algorithms (FIPS-197).
+
+	  As of z9 the ECB and CBC modes are hardware accelerated
+	  for 128 bit keys.
+	  As of z10 the ECB and CBC modes are hardware accelerated
+	  for all AES key sizes.
+	  As of z196 the CTR mode is hardware accelerated for all AES
+	  key sizes and XTS mode is hardware accelerated for 256 and
+	  512 bit keys.
+
 config CRYPTO_ANUBIS
 	tristate "Anubis cipher algorithm"
 	depends on CRYPTO_USER_API_ENABLE_OBSOLETE
@@ -1415,6 +1504,19 @@ config CRYPTO_DES3_EDE_X86_64
 	  algorithm are provided; regular processing one input block and
 	  one that processes three blocks parallel.
 
+config CRYPTO_DES_S390
+	tristate "DES and Triple DES cipher algorithms"
+	depends on S390
+	select CRYPTO_ALGAPI
+	select CRYPTO_SKCIPHER
+	select CRYPTO_LIB_DES
+	help
+	  This is the s390 hardware accelerated implementation of the
+	  DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
+
+	  As of z990 the ECB and CBC mode are hardware accelerated.
+	  As of z196 the CTR mode is hardware accelerated.
+
 config CRYPTO_FCRYPT
 	tristate "FCrypt cipher algorithm"
 	select CRYPTO_ALGAPI
@@ -1474,6 +1576,18 @@ config CRYPTO_CHACHA_MIPS
 	select CRYPTO_SKCIPHER
 	select CRYPTO_ARCH_HAVE_LIB_CHACHA
 
+config CRYPTO_CHACHA_S390
+	tristate "ChaCha20 stream cipher"
+	depends on S390
+	select CRYPTO_SKCIPHER
+	select CRYPTO_LIB_CHACHA_GENERIC
+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
+	help
+	  This is the s390 SIMD implementation of the ChaCha20 stream
+	  cipher (RFC 7539).
+
+	  It is available as of z13.
+
 config CRYPTO_SEED
 	tristate "SEED cipher algorithm"
 	depends on CRYPTO_USER_API_ENABLE_OBSOLETE

drivers/crypto/Kconfig

@@ -133,98 +133,6 @@ config CRYPTO_PAES_S390
 	  Select this option if you want to use the paes cipher
 	  for example to use protected key encrypted devices.
 
-config CRYPTO_SHA1_S390
-	tristate "SHA1 digest algorithm"
-	depends on S390
-	select CRYPTO_HASH
-	help
-	  This is the s390 hardware accelerated implementation of the
-	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
-
-	  It is available as of z990.
-
-config CRYPTO_SHA256_S390
-	tristate "SHA256 digest algorithm"
-	depends on S390
-	select CRYPTO_HASH
-	help
-	  This is the s390 hardware accelerated implementation of the
-	  SHA256 secure hash standard (DFIPS 180-2).
-
-	  It is available as of z9.
-
-config CRYPTO_SHA512_S390
-	tristate "SHA384 and SHA512 digest algorithm"
-	depends on S390
-	select CRYPTO_HASH
-	help
-	  This is the s390 hardware accelerated implementation of the
-	  SHA512 secure hash standard.
-
-	  It is available as of z10.
-
-config CRYPTO_SHA3_256_S390
-	tristate "SHA3_224 and SHA3_256 digest algorithm"
-	depends on S390
-	select CRYPTO_HASH
-	help
-	  This is the s390 hardware accelerated implementation of the
-	  SHA3_256 secure hash standard.
-
-	  It is available as of z14.
-
-config CRYPTO_SHA3_512_S390
-	tristate "SHA3_384 and SHA3_512 digest algorithm"
-	depends on S390
-	select CRYPTO_HASH
-	help
-	  This is the s390 hardware accelerated implementation of the
-	  SHA3_512 secure hash standard.
-
-	  It is available as of z14.
-
-config CRYPTO_DES_S390
-	tristate "DES and Triple DES cipher algorithms"
-	depends on S390
-	select CRYPTO_ALGAPI
-	select CRYPTO_SKCIPHER
-	select CRYPTO_LIB_DES
-	help
-	  This is the s390 hardware accelerated implementation of the
-	  DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
-
-	  As of z990 the ECB and CBC mode are hardware accelerated.
-	  As of z196 the CTR mode is hardware accelerated.
-
-config CRYPTO_AES_S390
-	tristate "AES cipher algorithms"
-	depends on S390
-	select CRYPTO_ALGAPI
-	select CRYPTO_SKCIPHER
-	help
-	  This is the s390 hardware accelerated implementation of the
-	  AES cipher algorithms (FIPS-197).
-
-	  As of z9 the ECB and CBC modes are hardware accelerated
-	  for 128 bit keys.
-	  As of z10 the ECB and CBC modes are hardware accelerated
-	  for all AES key sizes.
-	  As of z196 the CTR mode is hardware accelerated for all AES
-	  key sizes and XTS mode is hardware accelerated for 256 and
-	  512 bit keys.
-
-config CRYPTO_CHACHA_S390
-	tristate "ChaCha20 stream cipher"
-	depends on S390
-	select CRYPTO_SKCIPHER
-	select CRYPTO_LIB_CHACHA_GENERIC
-	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-	help
-	  This is the s390 SIMD implementation of the ChaCha20 stream
-	  cipher (RFC 7539).
-
-	  It is available as of z13.
-
 config S390_PRNG
 	tristate "Pseudo random number generator device driver"
 	depends on S390
@@ -238,29 +146,6 @@ config S390_PRNG
 
 	  It is available as of z9.
 
-config CRYPTO_GHASH_S390
-	tristate "GHASH hash function"
-	depends on S390
-	select CRYPTO_HASH
-	help
-	  This is the s390 hardware accelerated implementation of GHASH,
-	  the hash function used in GCM (Galois/Counter mode).
-
-	  It is available as of z196.
-
-config CRYPTO_CRC32_S390
-	tristate "CRC-32 algorithms"
-	depends on S390
-	select CRYPTO_HASH
-	select CRC32
-	help
-	  Select this option if you want to use hardware accelerated
-	  implementations of CRC algorithms.  With this option, you
-	  can optimize the computation of CRC-32 (IEEE 802.3 Ethernet)
-	  and CRC-32C (Castagnoli).
-
-	  It is available with IBM z13 or later.
-
 config CRYPTO_DEV_NIAGARA2
 	tristate "Niagara2 Stream Processing Unit driver"
 	select CRYPTO_LIB_DES

drivers/net/Kconfig

@@ -94,6 +94,7 @@ config WIREGUARD
 	select CRYPTO_CURVE25519_NEON if ARM && KERNEL_MODE_NEON
 	select CRYPTO_CHACHA_MIPS if CPU_MIPS32_R2
 	select CRYPTO_POLY1305_MIPS if MIPS
+	select CRYPTO_CHACHA_S390 if S390
 	help
 	  WireGuard is a secure, fast, and easy to use replacement for IPSec
 	  that uses modern cryptography and clever networking tricks. It's

tools/testing/selftests/wireguard/qemu/Makefile

@@ -19,8 +19,6 @@ endif
 MIRROR := https://download.wireguard.com/qemu-test/distfiles/
 
 KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug)
-rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d))
-WIREGUARD_SOURCES := $(call rwildcard,$(KERNEL_PATH)/drivers/net/wireguard/,*)
 
 default: qemu
 
@@ -109,20 +107,22 @@ CHOST := x86_64-linux-musl
 QEMU_ARCH := x86_64
 KERNEL_ARCH := x86_64
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
-QEMU_MACHINE := -cpu host -machine q35,accel=kvm
+QEMU_MACHINE := -cpu host -machine microvm,accel=kvm,pit=off,pic=off,rtc=off -no-acpi
 else
-QEMU_MACHINE := -cpu max -machine q35
+QEMU_MACHINE := -cpu max -machine microvm -no-acpi
 endif
 else ifeq ($(ARCH),i686)
 CHOST := i686-linux-musl
 QEMU_ARCH := i386
 KERNEL_ARCH := x86
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(subst x86_64,i686,$(HOST_ARCH)),$(ARCH))
-QEMU_MACHINE := -cpu host -machine q35,accel=kvm
+QEMU_MACHINE := -cpu host -machine microvm,accel=kvm,pit=off,pic=off,rtc=off -no-acpi
 else
-QEMU_MACHINE := -cpu max -machine q35
+QEMU_MACHINE := -cpu coreduo -machine microvm -no-acpi
 endif
 else ifeq ($(ARCH),mips64)
 CHOST := mips64-linux-musl
@@ -208,10 +208,11 @@ QEMU_ARCH := m68k
 KERNEL_ARCH := m68k
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
 KERNEL_CMDLINE := $(shell sed -n 's/CONFIG_CMDLINE=\(.*\)/\1/p' arch/m68k.config)
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
-QEMU_MACHINE := -cpu host,accel=kvm -machine q800 -append $(KERNEL_CMDLINE)
+QEMU_MACHINE := -cpu host,accel=kvm -machine virt -append $(KERNEL_CMDLINE)
 else
-QEMU_MACHINE := -machine q800 -smp 1 -append $(KERNEL_CMDLINE)
+QEMU_MACHINE := -machine virt -smp 1 -append $(KERNEL_CMDLINE)
 endif
 else ifeq ($(ARCH),riscv64)
 CHOST := riscv64-linux-musl
@@ -322,8 +323,9 @@ $(KERNEL_BUILD_PATH)/.config: $(TOOLCHAIN_PATH)/.installed kernel.config arch/$(
 	cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config $(KERNEL_BUILD_PATH)/minimal.config
 	$(if $(findstring yes,$(DEBUG_KERNEL)),cp debug.config $(KERNEL_BUILD_PATH) && cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config debug.config,)
 
-$(KERNEL_BZIMAGE): $(TOOLCHAIN_PATH)/.installed $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init ../netns.sh $(WIREGUARD_SOURCES)
+$(KERNEL_BZIMAGE): $(TOOLCHAIN_PATH)/.installed $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init
 	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE)
+.PHONY: $(KERNEL_BZIMAGE)
 
 $(TOOLCHAIN_PATH)/$(CHOST)/include/linux/.installed: | $(KERNEL_BUILD_PATH)/.config $(TOOLCHAIN_PATH)/.installed
 	rm -rf $(TOOLCHAIN_PATH)/$(CHOST)/include/linux

tools/testing/selftests/wireguard/qemu/arch/arm.config

@@ -7,6 +7,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_VIRTIO_MENU=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_CONSOLE=y
+CONFIG_COMPAT_32BIT_TIME=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024

tools/testing/selftests/wireguard/qemu/arch/armeb.config

@@ -7,6 +7,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_VIRTIO_MENU=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_CONSOLE=y
+CONFIG_COMPAT_32BIT_TIME=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1"
 CONFIG_CPU_BIG_ENDIAN=y

tools/testing/selftests/wireguard/qemu/arch/i686.config

-CONFIG_ACPI=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_COMPAT_32BIT_TIME=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=vport0p1 panic_on_warn=1 reboot=t"
 CONFIG_FRAME_WARN=1024

tools/testing/selftests/wireguard/qemu/arch/m68k.config

 CONFIG_MMU=y
+CONFIG_VIRT=y
 CONFIG_M68KCLASSIC=y
-CONFIG_M68040=y
-CONFIG_MAC=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CMDLINE="console=ttyGF0 wg.success=vport0p1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024

tools/testing/selftests/wireguard/qemu/arch/mips.config

@@ -6,6 +6,7 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_COMPAT_32BIT_TIME=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024

tools/testing/selftests/wireguard/qemu/arch/mipsel.config

@@ -7,6 +7,7 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_COMPAT_32BIT_TIME=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024

tools/testing/selftests/wireguard/qemu/arch/powerpc.config

@@ -4,6 +4,7 @@ CONFIG_PPC_85xx=y
 CONFIG_PHYS_64BIT=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_COMPAT_32BIT_TIME=y
 CONFIG_MATH_EMULATION=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"

tools/testing/selftests/wireguard/qemu/arch/x86_64.config

-CONFIG_ACPI=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=vport0p1 panic_on_warn=1 reboot=t"
 CONFIG_FRAME_WARN=1280

tools/testing/selftests/wireguard/qemu/init.c

@@ -11,6 +11,7 @@
 #include <stdlib.h>
 #include <stdbool.h>
 #include <fcntl.h>
+#include <time.h>
 #include <sys/wait.h>
 #include <sys/mount.h>
 #include <sys/stat.h>
@@ -70,6 +71,15 @@ static void seed_rng(void)
 	close(fd);
 }
 
+static void set_time(void)
+{
+	if (time(NULL))
+		return;
+	pretty_message("[+] Setting fake time...");
+	if (stime(&(time_t){1433512680}) < 0)
+		panic("settimeofday()");
+}
+
 static void mount_filesystems(void)
 {
 	pretty_message("[+] Mounting filesystems...");
@@ -259,6 +269,7 @@ int main(int argc, char *argv[])
 	print_banner();
 	mount_filesystems();
 	seed_rng();
+	set_time();
 	kmod_selftests();
 	enable_logging();
 	clear_leaks();