Commit 0a3251a1 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'memory-controller-drv-5.11' of...

Merge tag 'memory-controller-drv-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers

Memory controller drivers for v5.11

1. jz4780_nemc: fix devm_ioremap() return value check leading to
   potential NULL pointer dereference.
2. mediatek: Convert bindings to dtschema and add support for mt8192.
3. pl353-smc: Fix compile test.

* tag 'memory-controller-drv-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  memory: pl353-smc: fix compile test on !ARM_AMBA
  memory: mtk-smi: Add mt8192 support
  dt-bindings: memory: mediatek: Add mt8192 support
  dt-bindings: memory: mediatek: Convert SMI to DT schema
  MAINTAINERS: add dt binding headers to memory controller drivers entry
  memory: jz4780_nemc: Fix an error pointer vs NULL check in probe()

Link: https://lore.kernel.org/r/20201125184529.5392-1-krzk@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents ba622a3e 5445a0c0
SMI (Smart Multimedia Interface) Common
The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
Mediatek SMI have two generations of HW architecture, here is the list
which generation the SoCs use:
generation 1: mt2701 and mt7623.
generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
There's slight differences between the two SMI, for generation 2, the
register which control the iommu port is at each larb's register base. But
for generation 1, the register is at smi ao base(smi always on register
base). Besides that, the smi async clock should be prepared and enabled for
SMI generation 1 to transform the smi clock into emi clock domain, but that is
not needed for SMI generation 2.
Required properties:
- compatible : must be one of :
"mediatek,mt2701-smi-common"
"mediatek,mt2712-smi-common"
"mediatek,mt6779-smi-common"
"mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
"mediatek,mt8167-smi-common"
"mediatek,mt8173-smi-common"
"mediatek,mt8183-smi-common"
- reg : the register and size of the SMI block.
- power-domains : a phandle to the power domain of this local arbiter.
- clocks : Must contain an entry for each entry in clock-names.
- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries
for generation 2 smi HW as follows:
- "apb" : Advanced Peripheral Bus clock, It's the clock for setting
the register.
- "smi" : It's the clock for transfer data and command.
They may be the same if both source clocks are the same.
- "async" : asynchronous clock, it help transform the smi clock into the emi
clock domain, this clock is only needed by generation 1 smi HW.
and these 2 option clocks for generation 2 smi HW:
- "gals0": the path0 clock of GALS(Global Async Local Sync).
- "gals1": the path1 clock of GALS(Global Async Local Sync).
Here is the list which has this GALS: mt6779 and mt8183.
Example:
smi_common: smi@14022000 {
compatible = "mediatek,mt8173-smi-common";
reg = <0 0x14022000 0 0x1000>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_SMI_COMMON>,
<&mmsys CLK_MM_SMI_COMMON>;
clock-names = "apb", "smi";
};
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2020 MediaTek Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: SMI (Smart Multimedia Interface) Common
maintainers:
- Yong Wu <yong.wu@mediatek.com>
description: |
The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
MediaTek SMI have two generations of HW architecture, here is the list
which generation the SoCs use:
generation 1: mt2701 and mt7623.
generation 2: mt2712, mt6779, mt8167, mt8173, mt8183 and mt8192.
There's slight differences between the two SMI, for generation 2, the
register which control the iommu port is at each larb's register base. But
for generation 1, the register is at smi ao base(smi always on register
base). Besides that, the smi async clock should be prepared and enabled for
SMI generation 1 to transform the smi clock into emi clock domain, but that is
not needed for SMI generation 2.
properties:
compatible:
oneOf:
- enum:
- mediatek,mt2701-smi-common
- mediatek,mt2712-smi-common
- mediatek,mt6779-smi-common
- mediatek,mt8167-smi-common
- mediatek,mt8173-smi-common
- mediatek,mt8183-smi-common
- mediatek,mt8192-smi-common
- description: for mt7623
items:
- const: mediatek,mt7623-smi-common
- const: mediatek,mt2701-smi-common
reg:
maxItems: 1
power-domains:
maxItems: 1
clocks:
description: |
apb and smi are mandatory. the async is only for generation 1 smi HW.
gals(global async local sync) also is optional, see below.
minItems: 2
maxItems: 4
items:
- description: apb is Advanced Peripheral Bus clock, It's the clock for
setting the register.
- description: smi is the clock for transfer data and command.
- description: async is asynchronous clock, it help transform the smi
clock into the emi clock domain.
- description: gals0 is the path0 clock of gals.
- description: gals1 is the path1 clock of gals.
clock-names:
minItems: 2
maxItems: 4
required:
- compatible
- reg
- power-domains
- clocks
- clock-names
allOf:
- if: # only for gen1 HW
properties:
compatible:
contains:
enum:
- mediatek,mt2701-smi-common
then:
properties:
clock:
items:
minItems: 3
maxItems: 3
clock-names:
items:
- const: apb
- const: smi
- const: async
- if: # for gen2 HW that have gals
properties:
compatible:
enum:
- mediatek,mt6779-smi-common
- mediatek,mt8183-smi-common
- mediatek,mt8192-smi-common
then:
properties:
clock:
items:
minItems: 4
maxItems: 4
clock-names:
items:
- const: apb
- const: smi
- const: gals0
- const: gals1
else: # for gen2 HW that don't have gals
properties:
clock:
items:
minItems: 2
maxItems: 2
clock-names:
items:
- const: apb
- const: smi
additionalProperties: false
examples:
- |+
#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/power/mt8173-power.h>
smi_common: smi@14022000 {
compatible = "mediatek,mt8173-smi-common";
reg = <0x14022000 0x1000>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_SMI_COMMON>,
<&mmsys CLK_MM_SMI_COMMON>;
clock-names = "apb", "smi";
};
SMI (Smart Multimedia Interface) Local Arbiter
The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
Required properties:
- compatible : must be one of :
"mediatek,mt2701-smi-larb"
"mediatek,mt2712-smi-larb"
"mediatek,mt6779-smi-larb"
"mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
"mediatek,mt8167-smi-larb"
"mediatek,mt8173-smi-larb"
"mediatek,mt8183-smi-larb"
- reg : the register and size of this local arbiter.
- mediatek,smi : a phandle to the smi_common node.
- power-domains : a phandle to the power domain of this local arbiter.
- clocks : Must contain an entry for each entry in clock-names.
- clock-names: must contain 2 entries, as follows:
- "apb" : Advanced Peripheral Bus clock, It's the clock for setting
the register.
- "smi" : It's the clock for transfer data and command.
and this optional clock name:
- "gals": the clock for GALS(Global Async Local Sync).
Here is the list which has this GALS: mt8183.
Required property for mt2701, mt2712, mt6779, mt7623 and mt8167:
- mediatek,larb-id :the hardware id of this larb.
Example:
larb1: larb@16010000 {
compatible = "mediatek,mt8173-smi-larb";
reg = <0 0x16010000 0 0x1000>;
mediatek,smi = <&smi_common>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
clocks = <&vdecsys CLK_VDEC_CKEN>,
<&vdecsys CLK_VDEC_LARB_CKEN>;
clock-names = "apb", "smi";
};
Example for mt2701:
larb0: larb@14010000 {
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x14010000 0 0x1000>;
mediatek,smi = <&smi_common>;
mediatek,larb-id = <0>;
clocks = <&mmsys CLK_MM_SMI_LARB0>,
<&mmsys CLK_MM_SMI_LARB0>;
clock-names = "apb", "smi";
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
};
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2020 MediaTek Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-larb.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: SMI (Smart Multimedia Interface) Local Arbiter
maintainers:
- Yong Wu <yong.wu@mediatek.com>
description: |
The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
properties:
compatible:
oneOf:
- enum:
- mediatek,mt2701-smi-larb
- mediatek,mt2712-smi-larb
- mediatek,mt6779-smi-larb
- mediatek,mt8167-smi-larb
- mediatek,mt8173-smi-larb
- mediatek,mt8183-smi-larb
- mediatek,mt8192-smi-larb
- description: for mt7623
items:
- const: mediatek,mt7623-smi-larb
- const: mediatek,mt2701-smi-larb
reg:
maxItems: 1
clocks:
description: |
apb and smi are mandatory. gals(global async local sync) is optional.
minItems: 2
maxItems: 3
items:
- description: apb is Advanced Peripheral Bus clock, It's the clock for
setting the register.
- description: smi is the clock for transfer data and command.
- description: the clock for gals.
clock-names:
minItems: 2
maxItems: 3
power-domains:
maxItems: 1
mediatek,smi:
$ref: /schemas/types.yaml#/definitions/phandle-array
description: a phandle to the smi_common node.
mediatek,larb-id:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 31
description: the hardware id of this larb. It's only required when this
hardward id is not consecutive from its M4U point of view.
required:
- compatible
- reg
- clocks
- clock-names
- power-domains
allOf:
- if: # HW has gals
properties:
compatible:
enum:
- mediatek,mt8183-smi-larb
then:
properties:
clock:
items:
minItems: 3
maxItems: 3
clock-names:
items:
- const: apb
- const: smi
- const: gals
else:
properties:
clock:
items:
minItems: 2
maxItems: 2
clock-names:
items:
- const: apb
- const: smi
- if:
properties:
compatible:
contains:
enum:
- mediatek,mt2701-smi-larb
- mediatek,mt2712-smi-larb
- mediatek,mt6779-smi-larb
- mediatek,mt8167-smi-larb
- mediatek,mt8192-smi-larb
then:
required:
- mediatek,larb-id
additionalProperties: false
examples:
- |+
#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/power/mt8173-power.h>
larb1: larb@16010000 {
compatible = "mediatek,mt8173-smi-larb";
reg = <0x16010000 0x1000>;
mediatek,smi = <&smi_common>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
clocks = <&vdecsys CLK_VDEC_CKEN>,
<&vdecsys CLK_VDEC_LARB_CKEN>;
clock-names = "apb", "smi";
};
......@@ -11332,6 +11332,7 @@ S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl.git
F: Documentation/devicetree/bindings/memory-controllers/
F: drivers/memory/
F: include/dt-bindings/memory/
MEMORY FREQUENCY SCALING DRIVERS FOR NVIDIA TEGRA
M: Dmitry Osipenko <digetx@gmail.com>
......
......@@ -191,8 +191,8 @@ config DA8XX_DDRCTL
config PL353_SMC
tristate "ARM PL35X Static Memory Controller(SMC) driver"
default y if ARM
depends on ARM
depends on ARM_AMBA || COMPILE_TEST
depends on ARM || COMPILE_TEST
depends on ARM_AMBA
help
This driver is for the ARM PL351/PL353 Static Memory
Controller(SMC) module.
......
......@@ -304,9 +304,9 @@ static int jz4780_nemc_probe(struct platform_device *pdev)
}
nemc->base = devm_ioremap(dev, res->start, NEMC_REG_LEN);
if (IS_ERR(nemc->base)) {
if (!nemc->base) {
dev_err(dev, "failed to get I/O memory\n");
return PTR_ERR(nemc->base);
return -ENOMEM;
}
writel(0, nemc->base + NEMC_NFCSR);
......
......@@ -268,6 +268,10 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
/* IPU0 | IPU1 | CCU */
};
static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
.config_port = mtk_smi_larb_config_port_gen2_general,
};
static const struct of_device_id mtk_smi_larb_of_ids[] = {
{
.compatible = "mediatek,mt8167-smi-larb",
......@@ -293,6 +297,10 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
.compatible = "mediatek,mt8183-smi-larb",
.data = &mtk_smi_larb_mt8183
},
{
.compatible = "mediatek,mt8192-smi-larb",
.data = &mtk_smi_larb_mt8192
},
{}
};
......@@ -432,6 +440,13 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
F_MMU1_LARB(7),
};
static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
.gen = MTK_SMI_GEN2,
.has_gals = true,
.bus_sel = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(5) |
F_MMU1_LARB(6),
};
static const struct of_device_id mtk_smi_common_of_ids[] = {
{
.compatible = "mediatek,mt8173-smi-common",
......@@ -457,6 +472,10 @@ static const struct of_device_id mtk_smi_common_of_ids[] = {
.compatible = "mediatek,mt8183-smi-common",
.data = &mtk_smi_common_mt8183,
},
{
.compatible = "mediatek,mt8192-smi-common",
.data = &mtk_smi_common_mt8192,
},
{}
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment