Merge branch 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci

* 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci:
  PCI: Clean-up MPS debug output
  pci: Clamp pcie_set_readrq() when using "performance" settings
  PCI: enable MPS "performance" setting to properly handle bridge MPS
  PCI: Workaround for Intel MPS errata
  PCI: Add support for PASID capability
  PCI: Add implementation for PRI capability
  PCI: Export ATS functions to modules
  PCI: Move ATS implementation into own file
  PCI / PM: Remove unnecessary error variable from acpi_dev_run_wake()
  PCI hotplug: acpiphp: Prevent deadlock on PCI-to-PCI bridge remove
  PCI / PM: Extend PME polling to all PCI devices
  PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823
  PCI: Make pci_setup_bridge() non-static for use by arch code
  x86: constify PCI raw ops structures
  PCI: Add quirk for known incorrect MPSS
  PCI: Add Solarflare vendor ID and SFC4000 device IDs

arch/x86/include/asm/pci_x86.h

@@ -99,10 +99,10 @@ struct pci_raw_ops {
 						int reg, int len, u32 val);
 };
 
-extern struct pci_raw_ops *raw_pci_ops;
-extern struct pci_raw_ops *raw_pci_ext_ops;
+extern const struct pci_raw_ops *raw_pci_ops;
+extern const struct pci_raw_ops *raw_pci_ext_ops;
 
-extern struct pci_raw_ops pci_direct_conf1;
+extern const struct pci_raw_ops pci_direct_conf1;
 extern bool port_cf9_safe;
 
 /* arch_initcall level */

arch/x86/pci/ce4100.c

@@ -304,7 +304,7 @@ static int ce4100_conf_write(unsigned int seg, unsigned int bus,
 	return pci_direct_conf1.write(seg, bus, devfn, reg, len, value);
 }
 
-struct pci_raw_ops ce4100_pci_conf = {
+static const struct pci_raw_ops ce4100_pci_conf = {
 	.read =	ce4100_conf_read,
 	.write = ce4100_conf_write,
 };

arch/x86/pci/common.c

@@ -33,8 +33,8 @@ int noioapicreroute = 1;
 int pcibios_last_bus = -1;
 unsigned long pirq_table_addr;
 struct pci_bus *pci_root_bus;
-struct pci_raw_ops *raw_pci_ops;
-struct pci_raw_ops *raw_pci_ext_ops;
+const struct pci_raw_ops *__read_mostly raw_pci_ops;
+const struct pci_raw_ops *__read_mostly raw_pci_ext_ops;
 
 int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
 						int reg, int len, u32 *val)

arch/x86/pci/direct.c

@@ -79,7 +79,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus,
 
 #undef PCI_CONF1_ADDRESS
 
-struct pci_raw_ops pci_direct_conf1 = {
+const struct pci_raw_ops pci_direct_conf1 = {
 	.read =		pci_conf1_read,
 	.write =	pci_conf1_write,
 };
@@ -175,7 +175,7 @@ static int pci_conf2_write(unsigned int seg, unsigned int bus,
 
 #undef PCI_CONF2_ADDRESS
 
-struct pci_raw_ops pci_direct_conf2 = {
+static const struct pci_raw_ops pci_direct_conf2 = {
 	.read =		pci_conf2_read,
 	.write =	pci_conf2_write,
 };
@@ -191,7 +191,7 @@ struct pci_raw_ops pci_direct_conf2 = {
  * This should be close to trivial, but it isn't, because there are buggy
  * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
  */
-static int __init pci_sanity_check(struct pci_raw_ops *o)
+static int __init pci_sanity_check(const struct pci_raw_ops *o)
 {
 	u32 x = 0;
 	int year, devfn;

arch/x86/pci/mmconfig_32.c

@@ -117,7 +117,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
 	return 0;
 }
 
-static struct pci_raw_ops pci_mmcfg = {
+static const struct pci_raw_ops pci_mmcfg = {
 	.read =		pci_mmcfg_read,
 	.write =	pci_mmcfg_write,
 };

arch/x86/pci/mmconfig_64.c

@@ -81,7 +81,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
 	return 0;
 }
 
-static struct pci_raw_ops pci_mmcfg = {
+static const struct pci_raw_ops pci_mmcfg = {
 	.read =		pci_mmcfg_read,
 	.write =	pci_mmcfg_write,
 };

arch/x86/pci/numaq_32.c

@@ -110,7 +110,7 @@ static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
 
 #undef PCI_CONF1_MQ_ADDRESS
 
-static struct pci_raw_ops pci_direct_conf1_mq = {
+static const struct pci_raw_ops pci_direct_conf1_mq = {
 	.read	= pci_conf1_mq_read,
 	.write	= pci_conf1_mq_write
 };

arch/x86/pci/olpc.c

@@ -301,7 +301,7 @@ static int pci_olpc_write(unsigned int seg, unsigned int bus,
 	return 0;
 }
 
-static struct pci_raw_ops pci_olpc_conf = {
+static const struct pci_raw_ops pci_olpc_conf = {
 	.read =	pci_olpc_read,
 	.write = pci_olpc_write,
 };

arch/x86/pci/pcbios.c

@@ -303,7 +303,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
  * Function table for BIOS32 access
  */
 
-static struct pci_raw_ops pci_bios_access = {
+static const struct pci_raw_ops pci_bios_access = {
 	.read =		pci_bios_read,
 	.write =	pci_bios_write
 };
@@ -312,7 +312,7 @@ static struct pci_raw_ops pci_bios_access = {
  * Try to find PCI BIOS.
  */
 
-static struct pci_raw_ops * __devinit pci_find_bios(void)
+static const struct pci_raw_ops * __devinit pci_find_bios(void)
 {
 	union bios32 *check;
 	unsigned char sum;

drivers/acpi/osl.c

@@ -80,7 +80,8 @@ static acpi_osd_handler acpi_irq_handler;
 static void *acpi_irq_context;
 static struct workqueue_struct *kacpid_wq;
 static struct workqueue_struct *kacpi_notify_wq;
-static struct workqueue_struct *kacpi_hotplug_wq;
+struct workqueue_struct *kacpi_hotplug_wq;
+EXPORT_SYMBOL(kacpi_hotplug_wq);
 
 struct acpi_res_list {
 	resource_size_t start;

drivers/net/ethernet/sfc/efx.c

@@ -2229,13 +2229,15 @@ void efx_schedule_reset(struct efx_nic *efx, enum reset_type type)
 
 /* PCI device ID table */
 static DEFINE_PCI_DEVICE_TABLE(efx_pci_table) = {
-	{PCI_DEVICE(EFX_VENDID_SFC, FALCON_A_P_DEVID),
+	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE,
+		    PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0),
 	 .driver_data = (unsigned long) &falcon_a1_nic_type},
-	{PCI_DEVICE(EFX_VENDID_SFC, FALCON_B_P_DEVID),
+	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE,
+		    PCI_DEVICE_ID_SOLARFLARE_SFC4000B),
 	 .driver_data = (unsigned long) &falcon_b0_nic_type},
-	{PCI_DEVICE(EFX_VENDID_SFC, BETHPAGE_A_P_DEVID),
+	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE, BETHPAGE_A_P_DEVID),
 	 .driver_data = (unsigned long) &siena_a0_nic_type},
-	{PCI_DEVICE(EFX_VENDID_SFC, SIENA_A_P_DEVID),
+	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE, SIENA_A_P_DEVID),
 	 .driver_data = (unsigned long) &siena_a0_nic_type},
 	{0}			/* end of list */
 };

drivers/net/ethernet/sfc/efx.h

@@ -15,10 +15,6 @@
 #include "filter.h"
 
 /* PCI IDs */
-#define EFX_VENDID_SFC	        0x1924
-#define FALCON_A_P_DEVID	0x0703
-#define FALCON_A_S_DEVID        0x6703
-#define FALCON_B_P_DEVID        0x0710
 #define BETHPAGE_A_P_DEVID      0x0803
 #define SIENA_A_P_DEVID         0x0813
 

drivers/net/ethernet/sfc/falcon.c

@@ -1426,7 +1426,8 @@ static int falcon_probe_nic(struct efx_nic *efx)
 		}
 
 		dev = pci_dev_get(efx->pci_dev);
-		while ((dev = pci_get_device(EFX_VENDID_SFC, FALCON_A_S_DEVID,
+		while ((dev = pci_get_device(PCI_VENDOR_ID_SOLARFLARE,
+					     PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1,
 					     dev))) {
 			if (dev->bus == efx->pci_dev->bus &&
 			    dev->devfn == efx->pci_dev->devfn + 1) {

drivers/net/ethernet/sfc/falcon_boards.c

@@ -764,7 +764,8 @@ int falcon_probe_board(struct efx_nic *efx, u16 revision_info)
 
 	if (board->type) {
 		netif_info(efx, probe, efx->net_dev, "board is %s rev %c%d\n",
-			 (efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
+			 (efx->pci_dev->subsystem_vendor ==
+			  PCI_VENDOR_ID_SOLARFLARE)
 			 ? board->type->ref_model : board->type->gen_type,
 			 'A' + board->major, board->minor);
 		return 0;

drivers/pci/Kconfig

@@ -71,9 +71,13 @@ config HT_IRQ
 
 	   If unsure say Y.
 
+config PCI_ATS
+	bool
+
 config PCI_IOV
 	bool "PCI IOV support"
 	depends on PCI
+	select PCI_ATS
 	help
 	  I/O Virtualization is a PCI feature supported by some devices
 	  which allows them to create virtual devices which share their
@@ -81,6 +85,28 @@ config PCI_IOV
 
 	  If unsure, say N.
 
+config PCI_PRI
+	bool "PCI PRI support"
+	select PCI_ATS
+	help
+	  PRI is the PCI Page Request Interface. It allows PCI devices that are
+	  behind an IOMMU to recover from page faults.
+
+	  If unsure, say N.
+
+config PCI_PASID
+	bool "PCI PASID support"
+	depends on PCI
+	select PCI_ATS
+	help
+	  Process Address Space Identifiers (PASIDs) can be used by PCI devices
+	  to access more than one IO address space at the same time. To make
+	  use of this feature an IOMMU is required which also supports PASIDs.
+	  Select this option if you have such an IOMMU and want to compile the
+	  driver for it into your kernel.
+
+	  If unsure, say N.
+
 config PCI_IOAPIC
 	bool
 	depends on PCI

drivers/pci/Makefile

@@ -29,6 +29,7 @@ obj-$(CONFIG_PCI_MSI) += msi.o
 # Build the Hypertransport interrupt support
 obj-$(CONFIG_HT_IRQ) += htirq.o
 
+obj-$(CONFIG_PCI_ATS) += ats.o
 obj-$(CONFIG_PCI_IOV) += iov.o
 
 #

drivers/pci/hotplug/acpiphp_glue.c

@@ -48,6 +48,7 @@
 #include <linux/pci-acpi.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
+#include <linux/acpi.h>
 
 #include "../pci.h"
 #include "acpiphp.h"
@@ -1149,15 +1150,35 @@ check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
 	return AE_OK ;
 }
 
-/**
- * handle_hotplug_event_bridge - handle ACPI event on bridges
- * @handle: Notify()'ed acpi_handle
- * @type: Notify code
- * @context: pointer to acpiphp_bridge structure
- *
- * Handles ACPI event notification on {host,p2p} bridges.
- */
-static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *context)
+struct acpiphp_hp_work {
+	struct work_struct work;
+	acpi_handle handle;
+	u32 type;
+	void *context;
+};
+
+static void alloc_acpiphp_hp_work(acpi_handle handle, u32 type,
+				  void *context,
+				  void (*func)(struct work_struct *work))
+{
+	struct acpiphp_hp_work *hp_work;
+	int ret;
+
+	hp_work = kmalloc(sizeof(*hp_work), GFP_KERNEL);
+	if (!hp_work)
+		return;
+
+	hp_work->handle = handle;
+	hp_work->type = type;
+	hp_work->context = context;
+
+	INIT_WORK(&hp_work->work, func);
+	ret = queue_work(kacpi_hotplug_wq, &hp_work->work);
+	if (!ret)
+		kfree(hp_work);
+}
+
+static void _handle_hotplug_event_bridge(struct work_struct *work)
 {
 	struct acpiphp_bridge *bridge;
 	char objname[64];
@@ -1165,11 +1186,18 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont
 				      .pointer = objname };
 	struct acpi_device *device;
 	int num_sub_bridges = 0;
+	struct acpiphp_hp_work *hp_work;
+	acpi_handle handle;
+	u32 type;
+
+	hp_work = container_of(work, struct acpiphp_hp_work, work);
+	handle = hp_work->handle;
+	type = hp_work->type;
 
 	if (acpi_bus_get_device(handle, &device)) {
 		/* This bridge must have just been physically inserted */
 		handle_bridge_insertion(handle, type);
-		return;
+		goto out;
 	}
 
 	bridge = acpiphp_handle_to_bridge(handle);
@@ -1180,7 +1208,7 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont
 
 	if (!bridge && !num_sub_bridges) {
 		err("cannot get bridge info\n");
-		return;
+		goto out;
 	}
 
 	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
@@ -1241,22 +1269,49 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont
 		warn("notify_handler: unknown event type 0x%x for %s\n", type, objname);
 		break;
 	}
+
+out:
+	kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
 }
 
 /**
- * handle_hotplug_event_func - handle ACPI event on functions (i.e. slots)
+ * handle_hotplug_event_bridge - handle ACPI event on bridges
  * @handle: Notify()'ed acpi_handle
  * @type: Notify code
- * @context: pointer to acpiphp_func structure
+ * @context: pointer to acpiphp_bridge structure
  *
- * Handles ACPI event notification on slots.
+ * Handles ACPI event notification on {host,p2p} bridges.
+ */
+static void handle_hotplug_event_bridge(acpi_handle handle, u32 type,
+					void *context)
+{
+	/*
+	 * Currently the code adds all hotplug events to the kacpid_wq
+	 * queue when it should add hotplug events to the kacpi_hotplug_wq.
+	 * The proper way to fix this is to reorganize the code so that
+	 * drivers (dock, etc.) do not call acpi_os_execute(), etc.
+	 * For now just re-add this work to the kacpi_hotplug_wq so we
+	 * don't deadlock on hotplug actions.
 	 */
-static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context)
+	alloc_acpiphp_hp_work(handle, type, context,
+			      _handle_hotplug_event_bridge);
+}
+
+static void _handle_hotplug_event_func(struct work_struct *work)
 {
 	struct acpiphp_func *func;
 	char objname[64];
 	struct acpi_buffer buffer = { .length = sizeof(objname),
 				      .pointer = objname };
+	struct acpiphp_hp_work *hp_work;
+	acpi_handle handle;
+	u32 type;
+	void *context;
+
+	hp_work = container_of(work, struct acpiphp_hp_work, work);
+	handle = hp_work->handle;
+	type = hp_work->type;
+	context = hp_work->context;
 
 	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
 
@@ -1291,8 +1346,32 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *contex
 		warn("notify_handler: unknown event type 0x%x for %s\n", type, objname);
 		break;
 	}
+
+	kfree(hp_work); /* allocated in handle_hotplug_event_func */
 }
 
+/**
+ * handle_hotplug_event_func - handle ACPI event on functions (i.e. slots)
+ * @handle: Notify()'ed acpi_handle
+ * @type: Notify code
+ * @context: pointer to acpiphp_func structure
+ *
+ * Handles ACPI event notification on slots.
+ */
+static void handle_hotplug_event_func(acpi_handle handle, u32 type,
+				      void *context)
+{
+	/*
+	 * Currently the code adds all hotplug events to the kacpid_wq
+	 * queue when it should add hotplug events to the kacpi_hotplug_wq.
+	 * The proper way to fix this is to reorganize the code so that
+	 * drivers (dock, etc.) do not call acpi_os_execute(), etc.
+	 * For now just re-add this work to the kacpi_hotplug_wq so we
+	 * don't deadlock on hotplug actions.
+	 */
+	alloc_acpiphp_hp_work(handle, type, context,
+			      _handle_hotplug_event_func);
+}
 
 static acpi_status
 find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)

drivers/pci/iov.c

@@ -722,145 +722,3 @@ int pci_num_vf(struct pci_dev *dev)
 		return dev->sriov->nr_virtfn;
 }
 EXPORT_SYMBOL_GPL(pci_num_vf);
-
-static int ats_alloc_one(struct pci_dev *dev, int ps)
-{
-	int pos;
-	u16 cap;
-	struct pci_ats *ats;
-
-	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
-	if (!pos)
-		return -ENODEV;
-
-	ats = kzalloc(sizeof(*ats), GFP_KERNEL);
-	if (!ats)
-		return -ENOMEM;
-
-	ats->pos = pos;
-	ats->stu = ps;
-	pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
-	ats->qdep = PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
-					    PCI_ATS_MAX_QDEP;
-	dev->ats = ats;
-
-	return 0;
-}
-
-static void ats_free_one(struct pci_dev *dev)
-{
-	kfree(dev->ats);
-	dev->ats = NULL;
-}
-
-/**
- * pci_enable_ats - enable the ATS capability
- * @dev: the PCI device
- * @ps: the IOMMU page shift
- *
- * Returns 0 on success, or negative on failure.
- */
-int pci_enable_ats(struct pci_dev *dev, int ps)
-{
-	int rc;
-	u16 ctrl;
-
-	BUG_ON(dev->ats && dev->ats->is_enabled);
-
-	if (ps < PCI_ATS_MIN_STU)
-		return -EINVAL;
-
-	if (dev->is_physfn || dev->is_virtfn) {
-		struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
-
-		mutex_lock(&pdev->sriov->lock);
-		if (pdev->ats)
-			rc = pdev->ats->stu == ps ? 0 : -EINVAL;
-		else
-			rc = ats_alloc_one(pdev, ps);
-
-		if (!rc)
-			pdev->ats->ref_cnt++;
-		mutex_unlock(&pdev->sriov->lock);
-		if (rc)
-			return rc;
-	}
-
-	if (!dev->is_physfn) {
-		rc = ats_alloc_one(dev, ps);
-		if (rc)
-			return rc;
-	}
-
-	ctrl = PCI_ATS_CTRL_ENABLE;
-	if (!dev->is_virtfn)
-		ctrl |= PCI_ATS_CTRL_STU(ps - PCI_ATS_MIN_STU);
-	pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
-
-	dev->ats->is_enabled = 1;
-
-	return 0;
-}
-
-/**
- * pci_disable_ats - disable the ATS capability
- * @dev: the PCI device
- */
-void pci_disable_ats(struct pci_dev *dev)
-{
-	u16 ctrl;
-
-	BUG_ON(!dev->ats || !dev->ats->is_enabled);
-
-	pci_read_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, &ctrl);
-	ctrl &= ~PCI_ATS_CTRL_ENABLE;
-	pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
-
-	dev->ats->is_enabled = 0;
-
-	if (dev->is_physfn || dev->is_virtfn) {
-		struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
-
-		mutex_lock(&pdev->sriov->lock);
-		pdev->ats->ref_cnt--;
-		if (!pdev->ats->ref_cnt)
-			ats_free_one(pdev);
-		mutex_unlock(&pdev->sriov->lock);
-	}
-
-	if (!dev->is_physfn)
-		ats_free_one(dev);
-}
-
-/**
- * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
- * @dev: the PCI device
- *
- * Returns the queue depth on success, or negative on failure.
- *
- * The ATS spec uses 0 in the Invalidate Queue Depth field to
- * indicate that the function can accept 32 Invalidate Request.
- * But here we use the `real' values (i.e. 1~32) for the Queue
- * Depth; and 0 indicates the function shares the Queue with
- * other functions (doesn't exclusively own a Queue).
- */
-int pci_ats_queue_depth(struct pci_dev *dev)
-{
-	int pos;
-	u16 cap;
-
-	if (dev->is_virtfn)
-		return 0;
-
-	if (dev->ats)
-		return dev->ats->qdep;
-
-	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
-	if (!pos)
-		return -ENODEV;
-
-	pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
-
-	return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
-				       PCI_ATS_MAX_QDEP;
-}

drivers/pci/pci-acpi.c

@@ -46,6 +46,9 @@ static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
 	struct pci_dev *pci_dev = context;
 
 	if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) {
+		if (pci_dev->pme_poll)
+			pci_dev->pme_poll = false;
+
 		pci_wakeup_event(pci_dev);
 		pci_check_pme_status(pci_dev);
 		pm_runtime_resume(&pci_dev->dev);
@@ -282,7 +285,6 @@ static int acpi_dev_run_wake(struct device *phys_dev, bool enable)
 {
 	struct acpi_device *dev;
 	acpi_handle handle;
-	int error = -ENODEV;
 
 	if (!device_run_wake(phys_dev))
 		return -EINVAL;
@@ -302,7 +304,7 @@ static int acpi_dev_run_wake(struct device *phys_dev, bool enable)
 		acpi_disable_wakeup_device_power(dev);
 	}
 
-	return error;
+	return 0;
 }
 
 static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)

drivers/pci/pci.c

@@ -1407,13 +1407,16 @@ bool pci_check_pme_status(struct pci_dev *dev)
 /**
  * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
  * @dev: Device to handle.
- * @ign: Ignored.
+ * @pme_poll_reset: Whether or not to reset the device's pme_poll flag.
  *
  * Check if @dev has generated PME and queue a resume request for it in that
  * case.
  */
-static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
+static int pci_pme_wakeup(struct pci_dev *dev, void *pme_poll_reset)
 {
+	if (pme_poll_reset && dev->pme_poll)
+		dev->pme_poll = false;
+
 	if (pci_check_pme_status(dev)) {
 		pci_wakeup_event(dev);
 		pm_request_resume(&dev->dev);
@@ -1428,7 +1431,7 @@ static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
 void pci_pme_wakeup_bus(struct pci_bus *bus)
 {
 	if (bus)
-		pci_walk_bus(bus, pci_pme_wakeup, NULL);
+		pci_walk_bus(bus, pci_pme_wakeup, (void *)true);
 }
 
 /**
@@ -1446,30 +1449,25 @@ bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
 
 static void pci_pme_list_scan(struct work_struct *work)
 {
-	struct pci_pme_device *pme_dev;
+	struct pci_pme_device *pme_dev, *n;
 
 	mutex_lock(&pci_pme_list_mutex);
 	if (!list_empty(&pci_pme_list)) {
-		list_for_each_entry(pme_dev, &pci_pme_list, list)
+		list_for_each_entry_safe(pme_dev, n, &pci_pme_list, list) {
+			if (pme_dev->dev->pme_poll) {
 				pci_pme_wakeup(pme_dev->dev, NULL);
-		schedule_delayed_work(&pci_pme_work, msecs_to_jiffies(PME_TIMEOUT));
+			} else {
+				list_del(&pme_dev->list);
+				kfree(pme_dev);
+			}
+		}
+		if (!list_empty(&pci_pme_list))
+			schedule_delayed_work(&pci_pme_work,
+					      msecs_to_jiffies(PME_TIMEOUT));
 	}
 	mutex_unlock(&pci_pme_list_mutex);
 }
 
-/**
- * pci_external_pme - is a device an external PCI PME source?
- * @dev: PCI device to check
- *
- */
-
-static bool pci_external_pme(struct pci_dev *dev)
-{
-	if (pci_is_pcie(dev) || dev->bus->number == 0)
-		return false;
-	return true;
-}
-
 /**
  * pci_pme_active - enable or disable PCI device's PME# function
  * @dev: PCI device to handle.
@@ -1503,7 +1501,7 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
 	   hit, and the power savings from the devices will still be a
 	   win. */
 
-	if (pci_external_pme(dev)) {
+	if (dev->pme_poll) {
 		struct pci_pme_device *pme_dev;
 		if (enable) {
 			pme_dev = kmalloc(sizeof(struct pci_pme_device),
@@ -1821,6 +1819,7 @@ void pci_pm_init(struct pci_dev *dev)
 			 (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
 			 (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
 		dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
+		dev->pme_poll = true;
 		/*
 		 * Make device's PM flags reflect the wake-up capability, but
 		 * let the user space enable it to wake up the system as needed.
@@ -3203,8 +3202,6 @@ int pcie_set_readrq(struct pci_dev *dev, int rq)
 	if (rq < 128 || rq > 4096 || !is_power_of_2(rq))
 		goto out;
 
-	v = (ffs(rq) - 8) << 12;
-
 	cap = pci_pcie_cap(dev);
 	if (!cap)
 		goto out;
@@ -3212,6 +3209,22 @@ int pcie_set_readrq(struct pci_dev *dev, int rq)
 	err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
 	if (err)
 		goto out;
+	/*
+	 * If using the "performance" PCIe config, we clamp the
+	 * read rq size to the max packet size to prevent the
+	 * host bridge generating requests larger than we can
+	 * cope with
+	 */
+	if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
+		int mps = pcie_get_mps(dev);
+
+		if (mps < 0)
+			return mps;
+		if (mps < rq)
+			rq = mps;
+	}
+
+	v = (ffs(rq) - 8) << 12;
 
 	if ((ctl & PCI_EXP_DEVCTL_READRQ) != v) {
 		ctl &= ~PCI_EXP_DEVCTL_READRQ;

drivers/pci/pcie/pme.c

@@ -84,6 +84,9 @@ static bool pcie_pme_walk_bus(struct pci_bus *bus)
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		/* Skip PCIe devices in case we started from a root port. */
 		if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
+			if (dev->pme_poll)
+				dev->pme_poll = false;
+
 			pci_wakeup_event(dev);
 			pm_request_resume(&dev->dev);
 			ret = true;
@@ -142,6 +145,9 @@ static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
 
 	/* First, check if the PME is from the root port itself. */
 	if (port->devfn == devfn && port->bus->number == busnr) {
+		if (port->pme_poll)
+			port->pme_poll = false;
+
 		if (pci_check_pme_status(port)) {
 			pm_request_resume(&port->dev);
 			found = true;
@@ -187,6 +193,9 @@ static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
 		/* The device is there, but we have to check its PME status. */
 		found = pci_check_pme_status(dev);
 		if (found) {
+			if (dev->pme_poll)
+				dev->pme_poll = false;
+
 			pci_wakeup_event(dev);
 			pm_request_resume(&dev->dev);
 		}

drivers/pci/probe.c

@@ -1363,31 +1363,25 @@ static int pcie_find_smpss(struct pci_dev *dev, void *data)
 
 static void pcie_write_mps(struct pci_dev *dev, int mps)
 {
-	int rc, dev_mpss;
-
-	dev_mpss = 128 << dev->pcie_mpss;
+	int rc;
 
 	if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
-		if (dev->bus->self) {
-			dev_dbg(&dev->bus->dev, "Bus MPSS %d\n",
-				128 << dev->bus->self->pcie_mpss);
+		mps = 128 << dev->pcie_mpss;
 
-			/* For "MPS Force Max", the assumption is made that
+		if (dev->pcie_type != PCI_EXP_TYPE_ROOT_PORT && dev->bus->self)
+			/* For "Performance", the assumption is made that
 			 * downstream communication will never be larger than
 			 * the MRRS.  So, the MPS only needs to be configured
 			 * for the upstream communication.  This being the case,
 			 * walk from the top down and set the MPS of the child
 			 * to that of the parent bus.
+			 *
+			 * Configure the device MPS with the smaller of the
+			 * device MPSS or the bridge MPS (which is assumed to be
+			 * properly configured at this point to the largest
+			 * allowable MPS based on its parent bus).
 			 */
-			mps = 128 << dev->bus->self->pcie_mpss;
-			if (mps > dev_mpss)
-				dev_warn(&dev->dev, "MPS configured higher than"
-					 " maximum supported by the device.  If"
-					 " a bus issue occurs, try running with"
-					 " pci=pcie_bus_safe.\n");
-		}
-
-		dev->pcie_mpss = ffs(mps) - 8;
+			mps = min(mps, pcie_get_mps(dev->bus->self));
 	}
 
 	rc = pcie_set_mps(dev, mps);
@@ -1395,25 +1389,22 @@ static void pcie_write_mps(struct pci_dev *dev, int mps)
 		dev_err(&dev->dev, "Failed attempting to set the MPS\n");
 }
 
-static void pcie_write_mrrs(struct pci_dev *dev, int mps)
+static void pcie_write_mrrs(struct pci_dev *dev)
 {
-	int rc, mrrs, dev_mpss;
+	int rc, mrrs;
 
 	/* In the "safe" case, do not configure the MRRS.  There appear to be
 	 * issues with setting MRRS to 0 on a number of devices.
 	 */
-
 	if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
 		return;
 
-	dev_mpss = 128 << dev->pcie_mpss;
-
 	/* For Max performance, the MRRS must be set to the largest supported
 	 * value.  However, it cannot be configured larger than the MPS the
-	 * device or the bus can support.  This assumes that the largest MRRS
-	 * available on the device cannot be smaller than the device MPSS.
+	 * device or the bus can support.  This should already be properly
+	 * configured by a prior call to pcie_write_mps.
 	 */
-	mrrs = min(mps, dev_mpss);
+	mrrs = pcie_get_mps(dev);
 
 	/* MRRS is a R/W register.  Invalid values can be written, but a
 	 * subsequent read will verify if the value is acceptable or not.
@@ -1421,38 +1412,41 @@ static void pcie_write_mrrs(struct pci_dev *dev, int mps)
 	 * shrink the value until it is acceptable to the HW.
  	 */
 	while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
-		dev_warn(&dev->dev, "Attempting to modify the PCI-E MRRS value"
-			 " to %d.  If any issues are encountered, please try "
-			 "running with pci=pcie_bus_safe\n", mrrs);
 		rc = pcie_set_readrq(dev, mrrs);
-		if (rc)
-			dev_err(&dev->dev,
-				"Failed attempting to set the MRRS\n");
+		if (!rc)
+			break;
 
+		dev_warn(&dev->dev, "Failed attempting to set the MRRS\n");
 		mrrs /= 2;
 	}
+
+	if (mrrs < 128)
+		dev_err(&dev->dev, "MRRS was unable to be configured with a "
+			"safe value.  If problems are experienced, try running "
+			"with pci=pcie_bus_safe.\n");
 }
 
 static int pcie_bus_configure_set(struct pci_dev *dev, void *data)
 {
-	int mps = 128 << *(u8 *)data;
+	int mps, orig_mps;
 
 	if (!pci_is_pcie(dev))
 		return 0;
 
-	dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
-		 pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev));
+	mps = 128 << *(u8 *)data;
+	orig_mps = pcie_get_mps(dev);
 
 	pcie_write_mps(dev, mps);
-	pcie_write_mrrs(dev, mps);
+	pcie_write_mrrs(dev);
 
-	dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
-		 pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev));
+	dev_info(&dev->dev, "PCI-E Max Payload Size set to %4d/%4d (was %4d), "
+		 "Max Read Rq %4d\n", pcie_get_mps(dev), 128 << dev->pcie_mpss,
+		 orig_mps, pcie_get_readrq(dev));
 
 	return 0;
 }
 
-/* pcie_bus_configure_mps requires that pci_walk_bus work in a top-down,
+/* pcie_bus_configure_settings requires that pci_walk_bus work in a top-down,
  * parents then children fashion.  If this changes, then this code will not
  * work as designed.
  */

drivers/pci/quirks.c

@@ -2745,20 +2745,6 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
 	/* disable must be done via function #0 */
 	if (PCI_FUNC(dev->devfn))
 		return;
-
-	pci_read_config_byte(dev, 0xCB, &disable);
-
-	if (disable & 0x02)
-		return;
-
-	pci_read_config_byte(dev, 0xCA, &write_enable);
-	pci_write_config_byte(dev, 0xCA, 0x57);
-	pci_write_config_byte(dev, 0xCB, disable | 0x02);
-	pci_write_config_byte(dev, 0xCA, write_enable);
-
-	dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
-	dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
-
 	/*
 	 * RICOH 0xe823 SD/MMC card reader fails to recognize
 	 * certain types of SD/MMC cards. Lowering the SD base
@@ -2781,6 +2767,20 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
 
 		dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n");
 	}
+
+	pci_read_config_byte(dev, 0xCB, &disable);
+
+	if (disable & 0x02)
+		return;
+
+	pci_read_config_byte(dev, 0xCA, &write_enable);
+	pci_write_config_byte(dev, 0xCA, 0x57);
+	pci_write_config_byte(dev, 0xCB, disable | 0x02);
+	pci_write_config_byte(dev, 0xCA, write_enable);
+
+	dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
+	dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
@@ -2822,6 +2822,89 @@ static void __devinit fixup_ti816x_class(struct pci_dev* dev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_TI, 0xb800, fixup_ti816x_class);
 
+/* Some PCIe devices do not work reliably with the claimed maximum
+ * payload size supported.
+ */
+static void __devinit fixup_mpss_256(struct pci_dev *dev)
+{
+	dev->pcie_mpss = 1; /* 256 bytes */
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+			 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+			 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+			 PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
+
+/* Intel 5000 and 5100 Memory controllers have an errata with read completion
+ * coalescing (which is enabled by default on some BIOSes) and MPS of 256B.
+ * Since there is no way of knowing what the PCIE MPS on each fabric will be
+ * until all of the devices are discovered and buses walked, read completion
+ * coalescing must be disabled.  Unfortunately, it cannot be re-enabled because
+ * it is possible to hotplug a device with MPS of 256B.
+ */
+static void __devinit quirk_intel_mc_errata(struct pci_dev *dev)
+{
+	int err;
+	u16 rcc;
+
+	if (pcie_bus_config == PCIE_BUS_TUNE_OFF)
+		return;
+
+	/* Intel errata specifies bits to change but does not say what they are.
+	 * Keeping them magical until such time as the registers and values can
+	 * be explained.
+	 */
+	err = pci_read_config_word(dev, 0x48, &rcc);
+	if (err) {
+		dev_err(&dev->dev, "Error attempting to read the read "
+			"completion coalescing register.\n");
+		return;
+	}
+
+	if (!(rcc & (1 << 10)))
+		return;
+
+	rcc &= ~(1 << 10);
+
+	err = pci_write_config_word(dev, 0x48, rcc);
+	if (err) {
+		dev_err(&dev->dev, "Error attempting to write the read "
+			"completion coalescing register.\n");
+		return;
+	}
+
+	pr_info_once("Read completion coalescing disabled due to hardware "
+		     "errata relating to 256B MPS.\n");
+}
+/* Intel 5000 series memory controllers and ports 2-7 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata);
+/* Intel 5100 series memory controllers and ports 2-7 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
+
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
 			  struct pci_fixup *end)
 {

drivers/pci/setup-bus.c

@@ -426,7 +426,7 @@ static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type)
 	pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
 }
 
-static void pci_setup_bridge(struct pci_bus *bus)
+void pci_setup_bridge(struct pci_bus *bus)
 {
 	unsigned long type = IORESOURCE_IO | IORESOURCE_MEM |
 				  IORESOURCE_PREFETCH;

include/acpi/acpiosxf.h

@@ -189,6 +189,8 @@ void acpi_os_fixed_event_count(u32 fixed_event_number);
 /*
  * Threads and Scheduling
  */
+extern struct workqueue_struct *kacpi_hotplug_wq;
+
 acpi_thread_id acpi_os_get_thread_id(void);
 
 acpi_status

include/linux/pci-ats.h

 #ifndef LINUX_PCI_ATS_H
 #define LINUX_PCI_ATS_H
 
+#include <linux/pci.h>
+
 /* Address Translation Service */
 struct pci_ats {
 	int pos;        /* capability position */
@@ -15,6 +17,7 @@ struct pci_ats {
 extern int pci_enable_ats(struct pci_dev *dev, int ps);
 extern void pci_disable_ats(struct pci_dev *dev);
 extern int pci_ats_queue_depth(struct pci_dev *dev);
+
 /**
  * pci_ats_enabled - query the ATS status
  * @dev: the PCI device
@@ -49,4 +52,76 @@ static inline int pci_ats_enabled(struct pci_dev *dev)
 
 #endif /* CONFIG_PCI_IOV */
 
+#ifdef CONFIG_PCI_PRI
+
+extern int  pci_enable_pri(struct pci_dev *pdev, u32 reqs);
+extern void pci_disable_pri(struct pci_dev *pdev);
+extern bool pci_pri_enabled(struct pci_dev *pdev);
+extern int  pci_reset_pri(struct pci_dev *pdev);
+extern bool pci_pri_stopped(struct pci_dev *pdev);
+extern int  pci_pri_status(struct pci_dev *pdev);
+
+#else /* CONFIG_PCI_PRI */
+
+static inline int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
+{
+	return -ENODEV;
+}
+
+static inline void pci_disable_pri(struct pci_dev *pdev)
+{
+}
+
+static inline bool pci_pri_enabled(struct pci_dev *pdev)
+{
+	return false;
+}
+
+static inline int pci_reset_pri(struct pci_dev *pdev)
+{
+	return -ENODEV;
+}
+
+static inline bool pci_pri_stopped(struct pci_dev *pdev)
+{
+	return true;
+}
+
+static inline int pci_pri_status(struct pci_dev *pdev)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_PCI_PRI */
+
+#ifdef CONFIG_PCI_PASID
+
+extern int pci_enable_pasid(struct pci_dev *pdev, int features);
+extern void pci_disable_pasid(struct pci_dev *pdev);
+extern int pci_pasid_features(struct pci_dev *pdev);
+extern int pci_max_pasids(struct pci_dev *pdev);
+
+#else  /* CONFIG_PCI_PASID */
+
+static inline int pci_enable_pasid(struct pci_dev *pdev, int features)
+{
+	return -EINVAL;
+}
+
+static inline void pci_disable_pasid(struct pci_dev *pdev)
+{
+}
+
+static inline int pci_pasid_features(struct pci_dev *pdev)
+{
+	return -EINVAL;
+}
+
+static inline int pci_max_pasids(struct pci_dev *pdev)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_PCI_PASID */
+
+
 #endif /* LINUX_PCI_ATS_H*/

include/linux/pci.h

@@ -275,6 +275,7 @@ struct pci_dev {
 	unsigned int	pme_support:5;	/* Bitmask of states from which PME#
 					   can be generated */
 	unsigned int	pme_interrupt:1;
+	unsigned int	pme_poll:1;	/* Poll device's PME status bit */
 	unsigned int	d1_support:1;	/* Low power state D1 is supported */
 	unsigned int	d2_support:1;	/* Low power state D2 is supported */
 	unsigned int	no_d1d2:1;	/* Only allow D0 and D3 */
@@ -957,6 +958,7 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 int pci_cfg_space_size_ext(struct pci_dev *dev);
 int pci_cfg_space_size(struct pci_dev *dev);
 unsigned char pci_bus_max_busnr(struct pci_bus *bus);
+void pci_setup_bridge(struct pci_bus *bus);
 
 #define PCI_VGA_STATE_CHANGE_BRIDGE (1 << 0)
 #define PCI_VGA_STATE_CHANGE_DECODES (1 << 1)

include/linux/pci_ids.h

@@ -2302,6 +2302,11 @@
 #define PCI_DEVICE_ID_RENESAS_SH7785	0x0007
 #define PCI_DEVICE_ID_RENESAS_SH7786	0x0010
 
+#define PCI_VENDOR_ID_SOLARFLARE	0x1924
+#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0	0x0703
+#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1	0x6703
+#define PCI_DEVICE_ID_SOLARFLARE_SFC4000B	0x0710
+
 #define PCI_VENDOR_ID_TDI               0x192E
 #define PCI_DEVICE_ID_TDI_EHCI          0x0101
 

include/linux/pci_regs.h

@@ -663,6 +663,26 @@
 #define  PCI_ATS_CTRL_STU(x)	((x) & 0x1f)	/* Smallest Translation Unit */
 #define  PCI_ATS_MIN_STU	12	/* shift of minimum STU block */
 
+/* Page Request Interface */
+#define PCI_PRI_CAP		0x13    /* PRI capability ID */
+#define PCI_PRI_CONTROL_OFF	0x04	/* Offset of control register */
+#define PCI_PRI_STATUS_OFF	0x06	/* Offset of status register */
+#define PCI_PRI_ENABLE		0x0001	/* Enable mask */
+#define PCI_PRI_RESET		0x0002	/* Reset bit mask */
+#define PCI_PRI_STATUS_RF	0x0001  /* Request Failure */
+#define PCI_PRI_STATUS_UPRGI	0x0002  /* Unexpected PRG index */
+#define PCI_PRI_STATUS_STOPPED	0x0100  /* PRI Stopped */
+#define PCI_PRI_MAX_REQ_OFF	0x08	/* Cap offset for max reqs supported */
+#define PCI_PRI_ALLOC_REQ_OFF	0x0c	/* Cap offset for max reqs allowed */
+
+/* PASID capability */
+#define PCI_PASID_CAP		0x1b    /* PASID capability ID */
+#define PCI_PASID_CAP_OFF	0x04    /* PASID feature register */
+#define PCI_PASID_CONTROL_OFF   0x06    /* PASID control register */
+#define PCI_PASID_ENABLE	0x01	/* Enable/Supported bit */
+#define PCI_PASID_EXEC		0x02	/* Exec permissions Enable/Supported */
+#define PCI_PASID_PRIV		0x04	/* Priviledge Mode Enable/Support */
+
 /* Single Root I/O Virtualization */
 #define PCI_SRIOV_CAP		0x04	/* SR-IOV Capabilities */
 #define  PCI_SRIOV_CAP_VFM	0x01	/* VF Migration Capable */