Commit 101e6fce authored by Maxime Ripard's avatar Maxime Ripard Committed by Mark Brown

spi: sun6i: Add YAML schemas

Switch the DT binding to a YAML schema to enable the DT validation.
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 3133f5c2
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/allwinner,sun6i-a31-spi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A31 SPI Controller Device Tree Bindings
allOf:
- $ref: "spi-controller.yaml"
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <maxime.ripard@bootlin.com>
properties:
"#address-cells": true
"#size-cells": true
compatible:
enum:
- allwinner,sun6i-a31-spi
- allwinner,sun8i-h3-spi
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
items:
- description: Bus Clock
- description: Module Clock
clock-names:
items:
- const: ahb
- const: mod
resets:
maxItems: 1
dmas:
items:
- description: RX DMA Channel
- description: TX DMA Channel
dma-names:
items:
- const: rx
- const: tx
num-cs: true
patternProperties:
"^.*@[0-9a-f]+":
properties:
reg:
items:
minimum: 0
maximum: 4
spi-rx-bus-width:
const: 1
spi-tx-bus-width:
const: 1
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
additionalProperties: false
examples:
- |
spi1: spi@1c69000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c69000 0x1000>;
interrupts = <0 66 4>;
clocks = <&ahb1_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
resets = <&ahb1_rst 21>;
#address-cells = <1>;
#size-cells = <0>;
};
- |
spi0: spi@1c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
interrupts = <0 65 4>;
clocks = <&ccu 30>, <&ccu 82>;
clock-names = "ahb", "mod";
dmas = <&dma 23>, <&dma 23>;
dma-names = "rx", "tx";
resets = <&ccu 15>;
#address-cells = <1>;
#size-cells = <0>;
};
...
Allwinner A31/H3 SPI controller
Required properties:
- compatible: Should be "allwinner,sun6i-a31-spi" or "allwinner,sun8i-h3-spi".
- reg: Should contain register location and length.
- interrupts: Should contain interrupt.
- clocks: phandle to the clocks feeding the SPI controller. Two are
needed:
- "ahb": the gated AHB parent clock
- "mod": the parent module clock
- clock-names: Must contain the clock names described just above
- resets: phandle to the reset controller asserting this device in
reset
Optional properties:
- dmas: DMA specifiers for rx and tx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: DMA request names should include "rx" and "tx" if present.
Example:
spi1: spi@1c69000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c69000 0x1000>;
interrupts = <0 66 4>;
clocks = <&ahb1_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
resets = <&ahb1_rst 21>;
};
spi0: spi@1c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma 23>, <&dma 23>;
dma-names = "rx", "tx";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
resets = <&ccu RST_BUS_SPI0>;
#address-cells = <1>;
#size-cells = <0>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment