Commit 18c00191 authored by Joe Perches's avatar Joe Perches Committed by David S. Miller

drivers/net/mac8390.c: Convert printk(KERN_<level> to pr_<level>(

Use printk_once
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Convert printks without KERN_<level> to pr_info and pr_cont
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 5c7fffd0
...@@ -17,6 +17,8 @@ ...@@ -17,6 +17,8 @@
/* 2002-12-30: Try to support more cards, some clues from NetBSD driver */ /* 2002-12-30: Try to support more cards, some clues from NetBSD driver */
/* 2003-12-26: Make sure Asante cards always work. */ /* 2003-12-26: Make sure Asante cards always work. */
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h> #include <linux/module.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/types.h> #include <linux/types.h>
...@@ -42,7 +44,7 @@ ...@@ -42,7 +44,7 @@
#include <asm/macints.h> #include <asm/macints.h>
static char version[] = static char version[] =
"mac8390.c: v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n"; "v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n";
#define EI_SHIFT(x) (ei_local->reg_offset[x]) #define EI_SHIFT(x) (ei_local->reg_offset[x])
#define ei_inb(port) in_8(port) #define ei_inb(port) in_8(port)
...@@ -288,7 +290,6 @@ struct net_device * __init mac8390_probe(int unit) ...@@ -288,7 +290,6 @@ struct net_device * __init mac8390_probe(int unit)
{ {
struct net_device *dev; struct net_device *dev;
volatile unsigned short *i; volatile unsigned short *i;
int version_disp = 0;
struct nubus_dev * ndev = NULL; struct nubus_dev * ndev = NULL;
int err = -ENODEV; int err = -ENODEV;
...@@ -320,10 +321,7 @@ struct net_device * __init mac8390_probe(int unit) ...@@ -320,10 +321,7 @@ struct net_device * __init mac8390_probe(int unit)
if ((cardtype = mac8390_ident(ndev)) == MAC8390_NONE) if ((cardtype = mac8390_ident(ndev)) == MAC8390_NONE)
continue; continue;
if (version_disp == 0) { printk_once(KERN_INFO pr_fmt(version));
version_disp = 1;
printk(version);
}
dev->irq = SLOT2IRQ(ndev->board->slot); dev->irq = SLOT2IRQ(ndev->board->slot);
/* This is getting to be a habit */ /* This is getting to be a habit */
...@@ -333,16 +331,14 @@ struct net_device * __init mac8390_probe(int unit) ...@@ -333,16 +331,14 @@ struct net_device * __init mac8390_probe(int unit)
of where its memory and registers are. */ of where its memory and registers are. */
if (nubus_get_func_dir(ndev, &dir) == -1) { if (nubus_get_func_dir(ndev, &dir) == -1) {
printk(KERN_ERR "%s: Unable to get Nubus functional" pr_err("%s: Unable to get Nubus functional directory for slot %X!\n",
" directory for slot %X!\n",
dev->name, ndev->board->slot); dev->name, ndev->board->slot);
continue; continue;
} }
/* Get the MAC address */ /* Get the MAC address */
if ((nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent)) == -1) { if ((nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent)) == -1) {
printk(KERN_INFO "%s: Couldn't get MAC address!\n", pr_info("%s: Couldn't get MAC address!\n", dev->name);
dev->name);
continue; continue;
} else { } else {
nubus_get_rsrc_mem(dev->dev_addr, &ent, 6); nubus_get_rsrc_mem(dev->dev_addr, &ent, 6);
...@@ -351,8 +347,7 @@ struct net_device * __init mac8390_probe(int unit) ...@@ -351,8 +347,7 @@ struct net_device * __init mac8390_probe(int unit)
if (useresources[cardtype] == 1) { if (useresources[cardtype] == 1) {
nubus_rewinddir(&dir); nubus_rewinddir(&dir);
if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS, &ent) == -1) { if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS, &ent) == -1) {
printk(KERN_ERR "%s: Memory offset resource" pr_err("%s: Memory offset resource for slot %X not found!\n",
" for slot %X not found!\n",
dev->name, ndev->board->slot); dev->name, ndev->board->slot);
continue; continue;
} }
...@@ -362,10 +357,8 @@ struct net_device * __init mac8390_probe(int unit) ...@@ -362,10 +357,8 @@ struct net_device * __init mac8390_probe(int unit)
dev->base_addr = dev->mem_start + 0x10000; dev->base_addr = dev->mem_start + 0x10000;
nubus_rewinddir(&dir); nubus_rewinddir(&dir);
if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH, &ent) == -1) { if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH, &ent) == -1) {
printk(KERN_INFO "%s: Memory length resource" pr_info("%s: Memory length resource for slot %X not found, probing\n",
" for slot %X not found" dev->name, ndev->board->slot);
", probing\n",
dev->name, ndev->board->slot);
offset = mac8390_memsize(dev->mem_start); offset = mac8390_memsize(dev->mem_start);
} else { } else {
nubus_get_rsrc_mem(&offset, &ent, 4); nubus_get_rsrc_mem(&offset, &ent, 4);
...@@ -417,8 +410,7 @@ struct net_device * __init mac8390_probe(int unit) ...@@ -417,8 +410,7 @@ struct net_device * __init mac8390_probe(int unit)
break; break;
default: default:
printk(KERN_ERR "Card type %s is" pr_err("Card type %s is unsupported, sorry\n",
" unsupported, sorry\n",
ndev->board->name); ndev->board->name);
continue; continue;
} }
...@@ -458,7 +450,7 @@ int init_module(void) ...@@ -458,7 +450,7 @@ int init_module(void)
dev_mac890[i] = dev; dev_mac890[i] = dev;
} }
if (!i) { if (!i) {
printk(KERN_NOTICE "mac8390.c: No useable cards found, driver NOT installed.\n"); pr_notice("No useable cards found, driver NOT installed.\n");
return -ENODEV; return -ENODEV;
} }
return 0; return 0;
...@@ -545,7 +537,7 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd ...@@ -545,7 +537,7 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
case MAC8390_APPLE: case MAC8390_APPLE:
switch (mac8390_testio(dev->mem_start)) { switch (mac8390_testio(dev->mem_start)) {
case ACCESS_UNKNOWN: case ACCESS_UNKNOWN:
printk("Don't know how to access card memory!\n"); pr_info("Don't know how to access card memory!\n");
return -ENODEV; return -ENODEV;
break; break;
...@@ -612,20 +604,21 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd ...@@ -612,20 +604,21 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
break; break;
default: default:
printk(KERN_ERR "Card type %s is unsupported, sorry\n", ndev->board->name); pr_err("Card type %s is unsupported, sorry\n",
ndev->board->name);
return -ENODEV; return -ENODEV;
} }
__NS8390_init(dev, 0); __NS8390_init(dev, 0);
/* Good, done, now spit out some messages */ /* Good, done, now spit out some messages */
printk(KERN_INFO "%s: %s in slot %X (type %s)\n", pr_info("%s: %s in slot %X (type %s)\n",
dev->name, ndev->board->name, ndev->board->slot, cardname[type]); dev->name, ndev->board->name, ndev->board->slot,
printk(KERN_INFO cardname[type]);
"MAC %pM IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n", pr_info("MAC %pM IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n",
dev->dev_addr, dev->irq, dev->dev_addr, dev->irq,
(unsigned int)(dev->mem_end - dev->mem_start) >> 10, (unsigned int)(dev->mem_end - dev->mem_start) >> 10,
dev->mem_start, access_bitmode ? 32 : 16); dev->mem_start, access_bitmode ? 32 : 16);
return 0; return 0;
} }
...@@ -633,7 +626,7 @@ static int mac8390_open(struct net_device *dev) ...@@ -633,7 +626,7 @@ static int mac8390_open(struct net_device *dev)
{ {
__ei_open(dev); __ei_open(dev);
if (request_irq(dev->irq, __ei_interrupt, 0, "8390 Ethernet", dev)) { if (request_irq(dev->irq, __ei_interrupt, 0, "8390 Ethernet", dev)) {
printk ("%s: unable to get IRQ %d.\n", dev->name, dev->irq); pr_info("%s: unable to get IRQ %d.\n", dev->name, dev->irq);
return -EAGAIN; return -EAGAIN;
} }
return 0; return 0;
...@@ -650,7 +643,7 @@ static void mac8390_no_reset(struct net_device *dev) ...@@ -650,7 +643,7 @@ static void mac8390_no_reset(struct net_device *dev)
{ {
ei_status.txing = 0; ei_status.txing = 0;
if (ei_debug > 1) if (ei_debug > 1)
printk("reset not supported\n"); pr_info("reset not supported\n");
return; return;
} }
...@@ -658,11 +651,11 @@ static void interlan_reset(struct net_device *dev) ...@@ -658,11 +651,11 @@ static void interlan_reset(struct net_device *dev)
{ {
unsigned char *target=nubus_slot_addr(IRQ2SLOT(dev->irq)); unsigned char *target=nubus_slot_addr(IRQ2SLOT(dev->irq));
if (ei_debug > 1) if (ei_debug > 1)
printk("Need to reset the NS8390 t=%lu...", jiffies); pr_info("Need to reset the NS8390 t=%lu...", jiffies);
ei_status.txing = 0; ei_status.txing = 0;
target[0xC0000] = 0; target[0xC0000] = 0;
if (ei_debug > 1) if (ei_debug > 1)
printk("reset complete\n"); pr_cont("reset complete\n");
return; return;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment