tty: Remove dev_err() usage after platform_get_irq()

We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-45-swboyd@chromium.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/8250/8250_bcm2835aux.c

@@ -56,10 +56,8 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
 
 	/* get the interrupt */
 	ret = platform_get_irq(pdev, 0);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "irq not found - %i", ret);
+	if (ret < 0)
 		return ret;
-	}
 	data->uart.port.irq = ret;
 
 	/* map the main registers */

drivers/tty/serial/8250/8250_lpc18xx.c

@@ -106,10 +106,8 @@ static int lpc18xx_serial_probe(struct platform_device *pdev)
 	int irq, ret;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "irq not found");
+	if (irq < 0)
 		return irq;
-	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {

drivers/tty/serial/8250/8250_uniphier.c

@@ -176,10 +176,8 @@ static int uniphier_uart_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "failed to get IRQ number\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)

drivers/tty/serial/amba-pl011.c

@@ -2718,11 +2718,8 @@ static int sbsa_uart_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	ret = platform_get_irq(pdev, 0);
-	if (ret < 0) {
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "cannot obtain irq\n");
+	if (ret < 0)
 		return ret;
-	}
 	uap->port.irq	= ret;
 
 #ifdef CONFIG_ACPI_SPCR_TABLE

drivers/tty/serial/fsl_lpuart.c

@@ -2385,10 +2385,8 @@ static int lpuart_probe(struct platform_device *pdev)
 	sport->port.type = PORT_LPUART;
 	sport->devtype = sdata->devtype;
 	ret = platform_get_irq(pdev, 0);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "cannot obtain irq\n");
+	if (ret < 0)
 		return ret;
-	}
 	sport->port.irq = ret;
 	sport->port.iotype = sdata->iotype;
 	if (lpuart_is_32(sport))

drivers/tty/serial/lpc32xx_hs.c

@@ -687,11 +687,8 @@ static int serial_hs_lpc32xx_probe(struct platform_device *pdev)
 	p->port.membase = NULL;
 
 	ret = platform_get_irq(pdev, 0);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Error getting irq for HS UART port %d\n",
-			uarts_registered);
+	if (ret < 0)
 		return ret;
-	}
 	p->port.irq = ret;
 
 	p->port.iotype = UPIO_MEM32;

drivers/tty/serial/mvebu-uart.c

@@ -884,10 +884,8 @@ static int mvebu_uart_probe(struct platform_device *pdev)
 	if (platform_irq_count(pdev) == 1) {
 		/* Old bindings: no name on the single unamed UART0 IRQ */
 		irq = platform_get_irq(pdev, 0);
-		if (irq < 0) {
-			dev_err(&pdev->dev, "unable to get UART IRQ\n");
+		if (irq < 0)
 			return irq;
-		}
 
 		mvuart->irq[UART_IRQ_SUM] = irq;
 	} else {
@@ -897,18 +895,14 @@ static int mvebu_uart_probe(struct platform_device *pdev)
 		 * uart-sum of UART0 port.
 		 */
 		irq = platform_get_irq_byname(pdev, "uart-rx");
-		if (irq < 0) {
-			dev_err(&pdev->dev, "unable to get 'uart-rx' IRQ\n");
+		if (irq < 0)
 			return irq;
-		}
 
 		mvuart->irq[UART_RX_IRQ] = irq;
 
 		irq = platform_get_irq_byname(pdev, "uart-tx");
-		if (irq < 0) {
-			dev_err(&pdev->dev, "unable to get 'uart-tx' IRQ\n");
+		if (irq < 0)
 			return irq;
-		}
 
 		mvuart->irq[UART_TX_IRQ] = irq;
 	}

drivers/tty/serial/owl-uart.c

@@ -662,10 +662,8 @@ static int owl_uart_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "could not get irq\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	if (owl_uart_ports[pdev->id]) {
 		dev_err(&pdev->dev, "port %d already allocated\n", pdev->id);

drivers/tty/serial/qcom_geni_serial.c

@@ -1291,10 +1291,8 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	port->tx_fifo_width = DEF_FIFO_WIDTH_BITS;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "Failed to get IRQ %d\n", irq);
+	if (irq < 0)
 		return irq;
-	}
 	uport->irq = irq;
 
 	uport->private_data = drv;

drivers/tty/serial/rda-uart.c

@@ -735,10 +735,8 @@ static int rda_uart_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "could not get irq\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	if (rda_uart_ports[pdev->id]) {
 		dev_err(&pdev->dev, "port %d already allocated\n", pdev->id);

drivers/tty/serial/sccnxp.c

@@ -961,7 +961,6 @@ static int sccnxp_probe(struct platform_device *pdev)
 	if (!s->poll) {
 		s->irq = platform_get_irq(pdev, 0);
 		if (s->irq < 0) {
-			dev_err(&pdev->dev, "Missing irq resource data\n");
 			ret = -ENXIO;
 			goto err_out;
 		}

drivers/tty/serial/serial-tegra.c

@@ -1307,10 +1307,8 @@ static int tegra_uart_probe(struct platform_device *pdev)
 
 	u->iotype = UPIO_MEM32;
 	ret = platform_get_irq(pdev, 0);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Couldn't get IRQ\n");
+	if (ret < 0)
 		return ret;
-	}
 	u->irq = ret;
 	u->regshift = 2;
 	ret = uart_add_one_port(&tegra_uart_driver, u);

drivers/tty/serial/sifive.c

@@ -896,10 +896,8 @@ static int sifive_serial_probe(struct platform_device *pdev)
 	int irq, id, r;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "could not acquire interrupt\n");
+	if (irq < 0)
 		return -EPROBE_DEFER;
-	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, mem);

drivers/tty/serial/sprd_serial.c

@@ -1173,10 +1173,8 @@ static int sprd_probe(struct platform_device *pdev)
 	up->mapbase = res->start;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "not provide irq resource: %d\n", irq);
+	if (irq < 0)
 		return irq;
-	}
 	up->irq = irq;
 
 	/*

drivers/tty/serial/stm32-usart.c

@@ -928,11 +928,8 @@ static int stm32_init_port(struct stm32_port *stm32port,
 	port->fifosize	= stm32port->info->cfg.fifosize;
 
 	ret = platform_get_irq(pdev, 0);
-	if (ret <= 0) {
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Can't get event IRQ: %d\n", ret);
-		return ret ? ret : -ENODEV;
-	}
+	if (ret <= 0)
+		return ret ? : -ENODEV;
 	port->irq = ret;
 
 	port->rs485_config = stm32_config_rs485;
@@ -941,14 +938,8 @@ static int stm32_init_port(struct stm32_port *stm32port,
 
 	if (stm32port->info->cfg.has_wakeup) {
 		stm32port->wakeirq = platform_get_irq(pdev, 1);
-		if (stm32port->wakeirq <= 0 && stm32port->wakeirq != -ENXIO) {
-			if (stm32port->wakeirq != -EPROBE_DEFER)
-				dev_err(&pdev->dev,
-					"Can't get event wake IRQ: %d\n",
-					stm32port->wakeirq);
-			return stm32port->wakeirq ? stm32port->wakeirq :
-				-ENODEV;
-		}
+		if (stm32port->wakeirq <= 0 && stm32port->wakeirq != -ENXIO)
+			return stm32port->wakeirq ? : -ENODEV;
 	}
 
 	stm32port->fifoen = stm32port->info->cfg.has_fifo;