vlan: remove ndo_select_queue() logic

Now vlan are lockless, we dont need special ndo_select_queue() logic.
dev_pick_tx() will do the multiqueue stuff on the real device transmit.
Suggested-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/8021q/vlan_dev.c

@@ -346,14 +346,6 @@ static netdev_tx_t vlan_dev_hard_start_xmit(struct sk_buff *skb,
 	return ret;
 }
 
-static u16 vlan_dev_select_queue(struct net_device *dev, struct sk_buff *skb)
-{
-	struct net_device *rdev = vlan_dev_info(dev)->real_dev;
-	const struct net_device_ops *ops = rdev->netdev_ops;
-
-	return ops->ndo_select_queue(rdev, skb);
-}
-
 static int vlan_dev_change_mtu(struct net_device *dev, int new_mtu)
 {
 	/* TODO: gotta make sure the underlying layer can handle it,
@@ -682,7 +674,7 @@ static const struct header_ops vlan_header_ops = {
 	.parse	 = eth_header_parse,
 };
 
-static const struct net_device_ops vlan_netdev_ops, vlan_netdev_ops_sq;
+static const struct net_device_ops vlan_netdev_ops;
 
 static int vlan_dev_init(struct net_device *dev)
 {
@@ -723,10 +715,7 @@ static int vlan_dev_init(struct net_device *dev)
 		dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
 	}
 
-	if (real_dev->netdev_ops->ndo_select_queue)
-		dev->netdev_ops = &vlan_netdev_ops_sq;
-	else
-		dev->netdev_ops = &vlan_netdev_ops;
+	dev->netdev_ops = &vlan_netdev_ops;
 
 	if (is_vlan_dev(real_dev))
 		subclass = 1;
@@ -872,31 +861,6 @@ static const struct net_device_ops vlan_netdev_ops = {
 #endif
 };
 
-static const struct net_device_ops vlan_netdev_ops_sq = {
-	.ndo_select_queue	= vlan_dev_select_queue,
-	.ndo_change_mtu		= vlan_dev_change_mtu,
-	.ndo_init		= vlan_dev_init,
-	.ndo_uninit		= vlan_dev_uninit,
-	.ndo_open		= vlan_dev_open,
-	.ndo_stop		= vlan_dev_stop,
-	.ndo_start_xmit =  vlan_dev_hard_start_xmit,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= vlan_dev_set_mac_address,
-	.ndo_set_rx_mode	= vlan_dev_set_rx_mode,
-	.ndo_set_multicast_list	= vlan_dev_set_rx_mode,
-	.ndo_change_rx_flags	= vlan_dev_change_rx_flags,
-	.ndo_do_ioctl		= vlan_dev_ioctl,
-	.ndo_neigh_setup	= vlan_dev_neigh_setup,
-	.ndo_get_stats64	= vlan_dev_get_stats64,
-#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
-	.ndo_fcoe_ddp_setup	= vlan_dev_fcoe_ddp_setup,
-	.ndo_fcoe_ddp_done	= vlan_dev_fcoe_ddp_done,
-	.ndo_fcoe_enable	= vlan_dev_fcoe_enable,
-	.ndo_fcoe_disable	= vlan_dev_fcoe_disable,
-	.ndo_fcoe_get_wwn	= vlan_dev_fcoe_get_wwn,
-#endif
-};
-
 void vlan_setup(struct net_device *dev)
 {
 	ether_setup(dev);