arm64: dts: exynos: Add AUD power domain to Exynos5433 SoC

This patch adds support for AUD power domain to Exynos5433 SoCs, which
contains following devices: a clock controller, a pin controller, LPASS
module, I2S controller, ADMA PL330 engine and UART #3 device.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

arch/arm64/boot/dts/exynos/exynos5433.dtsi

@@ -395,6 +395,7 @@ cmu_aud: clock-controller@114c0000 {
 			#clock-cells = <1>;
 			clock-names = "oscclk", "fout_aud_pll";
 			clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>;
+			power-domains = <&pd_aud>;
 		};
 
 		cmu_bus0: clock-controller@13600000 {
@@ -568,6 +569,13 @@ pd_disp: power-domain@105c4080 {
 			label = "DISP";
 		};
 
+		pd_aud: power-domain@105c40c0 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c40c0 0x20>;
+			#power-domain-cells = <0>;
+			label = "AUD";
+		};
+
 		pd_mfc: power-domain@105c4180 {
 			compatible = "samsung,exynos5433-pd";
 			reg = <0x105c4180 0x20>;
@@ -687,6 +695,7 @@ pinctrl_aud: pinctrl@114b0000 {
 			compatible = "samsung,exynos5433-pinctrl";
 			reg = <0x114b0000 0x1000>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_aud>;
 		};
 
 		pinctrl_cpif: pinctrl@10fe0000 {
@@ -1566,6 +1575,7 @@ audio-subsystem@11400000 {
 			clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
 			clock-names = "sfr0_ctrl";
 			samsung,pmu-syscon = <&pmu_system_controller>;
+			power-domains = <&pd_aud>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1579,6 +1589,7 @@ adma: adma@11420000 {
 				#dma-cells = <1>;
 				#dma-channels = <8>;
 				#dma-requests = <32>;
+				power-domains = <&pd_aud>;
 			};
 
 			i2s0: i2s0@11440000 {
@@ -1595,6 +1606,7 @@ i2s0: i2s0@11440000 {
 				clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2s0_bus>;
+				power-domains = <&pd_aud>;
 				status = "disabled";
 			};
 
@@ -1607,6 +1619,7 @@ serial_3: serial@11460000 {
 				clock-names = "uart", "clk_uart_baud0";
 				pinctrl-names = "default";
 				pinctrl-0 = <&uart_aud_bus>;
+				power-domains = <&pd_aud>;
 				status = "disabled";
 			};
 		};