selftests: bonding: add macvlan over bond testing

Add a macvlan over bonding test with mode active-backup, balance-tlb
and balance-alb.

]# ./bond_macvlan.sh
TEST: active-backup: IPv4: client->server                           [ OK ]
TEST: active-backup: IPv6: client->server                           [ OK ]
TEST: active-backup: IPv4: client->macvlan_1                        [ OK ]
TEST: active-backup: IPv6: client->macvlan_1                        [ OK ]
TEST: active-backup: IPv4: client->macvlan_2                        [ OK ]
TEST: active-backup: IPv6: client->macvlan_2                        [ OK ]
TEST: active-backup: IPv4: macvlan_1->macvlan_2                     [ OK ]
TEST: active-backup: IPv6: macvlan_1->macvlan_2                     [ OK ]
TEST: active-backup: IPv4: server->client                           [ OK ]
TEST: active-backup: IPv6: server->client                           [ OK ]
TEST: active-backup: IPv4: macvlan_1->client                        [ OK ]
TEST: active-backup: IPv6: macvlan_1->client                        [ OK ]
TEST: active-backup: IPv4: macvlan_2->client                        [ OK ]
TEST: active-backup: IPv6: macvlan_2->client                        [ OK ]
TEST: active-backup: IPv4: macvlan_2->macvlan_2                     [ OK ]
TEST: active-backup: IPv6: macvlan_2->macvlan_2                     [ OK ]
[...]
TEST: balance-alb: IPv4: client->server                             [ OK ]
TEST: balance-alb: IPv6: client->server                             [ OK ]
TEST: balance-alb: IPv4: client->macvlan_1                          [ OK ]
TEST: balance-alb: IPv6: client->macvlan_1                          [ OK ]
TEST: balance-alb: IPv4: client->macvlan_2                          [ OK ]
TEST: balance-alb: IPv6: client->macvlan_2                          [ OK ]
TEST: balance-alb: IPv4: macvlan_1->macvlan_2                       [ OK ]
TEST: balance-alb: IPv6: macvlan_1->macvlan_2                       [ OK ]
TEST: balance-alb: IPv4: server->client                             [ OK ]
TEST: balance-alb: IPv6: server->client                             [ OK ]
TEST: balance-alb: IPv4: macvlan_1->client                          [ OK ]
TEST: balance-alb: IPv6: macvlan_1->client                          [ OK ]
TEST: balance-alb: IPv4: macvlan_2->client                          [ OK ]
TEST: balance-alb: IPv6: macvlan_2->client                          [ OK ]
TEST: balance-alb: IPv4: macvlan_2->macvlan_2                       [ OK ]
TEST: balance-alb: IPv6: macvlan_2->macvlan_2                       [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

tools/testing/selftests/drivers/net/bonding/Makefile

@@ -9,7 +9,8 @@ TEST_PROGS := \
 	mode-1-recovery-updelay.sh \
 	mode-2-recovery-updelay.sh \
 	bond_options.sh \
-	bond-eth-type-change.sh
+	bond-eth-type-change.sh \
+	bond_macvlan.sh
 
 TEST_FILES := \
 	lag_lib.sh \

tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test macvlan over balance-alb
+
+lib_dir=$(dirname "$0")
+source ${lib_dir}/bond_topo_2d1c.sh
+
+m1_ns="m1-$(mktemp -u XXXXXX)"
+m2_ns="m1-$(mktemp -u XXXXXX)"
+m1_ip4="192.0.2.11"
+m1_ip6="2001:db8::11"
+m2_ip4="192.0.2.12"
+m2_ip6="2001:db8::12"
+
+cleanup()
+{
+	ip -n ${m1_ns} link del macv0
+	ip netns del ${m1_ns}
+	ip -n ${m2_ns} link del macv0
+	ip netns del ${m2_ns}
+
+	client_destroy
+	server_destroy
+	gateway_destroy
+}
+
+check_connection()
+{
+	local ns=${1}
+	local target=${2}
+	local message=${3:-"macvlan_over_bond"}
+	RET=0
+
+
+	ip netns exec ${ns} ping ${target} -c 4 -i 0.1 &>/dev/null
+	check_err $? "ping failed"
+	log_test "$mode: $message"
+}
+
+macvlan_over_bond()
+{
+	local param="$1"
+	RET=0
+
+	# setup new bond mode
+	bond_reset "${param}"
+
+	ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge
+	ip -n ${s_ns} link set macv0 netns ${m1_ns}
+	ip -n ${m1_ns} link set dev macv0 up
+	ip -n ${m1_ns} addr add ${m1_ip4}/24 dev macv0
+	ip -n ${m1_ns} addr add ${m1_ip6}/24 dev macv0
+
+	ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge
+	ip -n ${s_ns} link set macv0 netns ${m2_ns}
+	ip -n ${m2_ns} link set dev macv0 up
+	ip -n ${m2_ns} addr add ${m2_ip4}/24 dev macv0
+	ip -n ${m2_ns} addr add ${m2_ip6}/24 dev macv0
+
+	sleep 2
+
+	check_connection "${c_ns}" "${s_ip4}" "IPv4: client->server"
+	check_connection "${c_ns}" "${s_ip6}" "IPv6: client->server"
+	check_connection "${c_ns}" "${m1_ip4}" "IPv4: client->macvlan_1"
+	check_connection "${c_ns}" "${m1_ip6}" "IPv6: client->macvlan_1"
+	check_connection "${c_ns}" "${m2_ip4}" "IPv4: client->macvlan_2"
+	check_connection "${c_ns}" "${m2_ip6}" "IPv6: client->macvlan_2"
+	check_connection "${m1_ns}" "${m2_ip4}" "IPv4: macvlan_1->macvlan_2"
+	check_connection "${m1_ns}" "${m2_ip6}" "IPv6: macvlan_1->macvlan_2"
+
+
+	sleep 5
+
+	check_connection "${s_ns}" "${c_ip4}" "IPv4: server->client"
+	check_connection "${s_ns}" "${c_ip6}" "IPv6: server->client"
+	check_connection "${m1_ns}" "${c_ip4}" "IPv4: macvlan_1->client"
+	check_connection "${m1_ns}" "${c_ip6}" "IPv6: macvlan_1->client"
+	check_connection "${m2_ns}" "${c_ip4}" "IPv4: macvlan_2->client"
+	check_connection "${m2_ns}" "${c_ip6}" "IPv6: macvlan_2->client"
+	check_connection "${m2_ns}" "${m1_ip4}" "IPv4: macvlan_2->macvlan_2"
+	check_connection "${m2_ns}" "${m1_ip6}" "IPv6: macvlan_2->macvlan_2"
+
+	ip -n ${c_ns} neigh flush dev eth0
+}
+
+trap cleanup EXIT
+
+setup_prepare
+ip netns add ${m1_ns}
+ip netns add ${m2_ns}
+
+modes="active-backup balance-tlb balance-alb"
+
+for mode in $modes; do
+	macvlan_over_bond "mode $mode"
+done
+
+exit $EXIT_STATUS