Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add EPP support to the AMD P-state cpufreq driver, add support
  for new platforms to the Intel RAPL power capping driver, intel_idle
  and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
  drop the custom cpufreq driver for loongson1 that is not necessary any
  more (and the corresponding cpufreq platform device), fix assorted
  issues and clean up code.

  Specifics:

   - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
     Karny, Arnd Bergmann, Bagas Sanjaya)

   - Drop the custom cpufreq driver for loongson1 that is not necessary
     any more and the corresponding cpufreq platform device (Keguang
     Zhang)

   - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
     entries (Paul E. McKenney)

   - Enable thermal cooling for Tegra194 (Yi-Wei Wang)

   - Register module device table and add missing compatibles for
     cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)

   - Various dt binding updates for qcom-cpufreq-nvmem and
     opp-v2-kryo-cpu (Christian Marangi)

   - Make kobj_type structure in the cpufreq core constant (Thomas
     Weißschuh)

   - Make cpufreq_unregister_driver() return void (Uwe Kleine-König)

   - Make the TEO cpuidle governor check CPU utilization in order to
     refine idle state selection (Kajetan Puchalski)

   - Make Kconfig select the haltpoll cpuidle governor when the haltpoll
     cpuidle driver is selected and replace a default_idle() call in
     that driver with arch_cpu_idle() to allow MWAIT to be used (Li
     RongQing)

   - Add Emerald Rapids Xeon support to the intel_idle driver (Artem
     Bityutskiy)

   - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
     avoid randconfig build failures (Arnd Bergmann)

   - Make kobj_type structures used in the cpuidle sysfs interface
     constant (Thomas Weißschuh)

   - Make the cpuidle driver registration code update microsecond values
     of idle state parameters in accordance with their nanosecond values
     if they are provided (Rafael Wysocki)

   - Make the PSCI cpuidle driver prevent topology CPUs from being
     suspended on PREEMPT_RT (Krzysztof Kozlowski)

   - Document that pm_runtime_force_suspend() cannot be used with
     DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)

   - Add EXPORT macros for exporting PM functions from drivers (Richard
     Fitzgerald)

   - Remove /** from non-kernel-doc comments in hibernation code (Randy
     Dunlap)

   - Fix possible name leak in powercap_register_zone() (Yang Yingliang)

   - Add Meteor Lake and Emerald Rapids support to the intel_rapl power
     capping driver (Zhang Rui)

   - Modify the idle_inject power capping facility to support 100% idle
     injection (Srinivas Pandruvada)

   - Fix large time windows handling in the intel_rapl power capping
     driver (Zhang Rui)

   - Fix memory leaks with using debugfs_lookup() in the generic PM
     domains and Energy Model code (Greg Kroah-Hartman)

   - Add missing 'cache-unified' property in the example for kryo OPP
     bindings (Rob Herring)

   - Fix error checking in opp_migrate_dentry() (Qi Zheng)

   - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
     Dybcio)

   - Modify some power management utilities to use the canonical ftrace
     path (Ross Zwisler)

   - Correct spelling problems for Documentation/power/ as reported by
     codespell (Randy Dunlap)"

* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
  Documentation: amd-pstate: disambiguate user space sections
  cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
  dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
  PM: Add EXPORT macros for exporting PM functions
  cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
  MIPS: loongson32: Drop obsolete cpufreq platform device
  powercap: intel_rapl: Fix handling for large time window
  cpuidle: driver: Update microsecond values of state parameters as needed
  cpuidle: sysfs: make kobj_type structures constant
  cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
  PM: EM: fix memory leak with using debugfs_lookup()
  PM: domains: fix memory leak with using debugfs_lookup()
  cpufreq: Make kobj_type structure constant
  cpufreq: davinci: Fix clk use after free
  cpufreq: amd-pstate: avoid uninitialized variable use
  cpufreq: Make cpufreq_unregister_driver() return void
  OPP: fix error checking in opp_migrate_dentry()
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
  ...

Documentation/admin-guide/kernel-parameters.txt

@@ -7041,3 +7041,10 @@
 			  management firmware translates the requests into actual
 			  hardware states (core frequency, data fabric and memory
 			  clocks etc.)
+			active
+			  Use amd_pstate_epp driver instance as the scaling driver,
+			  driver provides a hint to the hardware if software wants
+			  to bias toward performance (0x0) or energy efficiency (0xff)
+			  to the CPPC firmware. then CPPC power algorithm will
+			  calculate the runtime workload and adjust the realtime cores
+			  frequency.

Documentation/admin-guide/pm/amd-pstate.rst

@@ -230,8 +230,8 @@ with :c:macro:`MSR_AMD_CPPC_ENABLE` or ``cppc_set_enable``, it will respond
 to the request from AMD P-States.
 
 
-User Space Interface in ``sysfs``
-==================================
+User Space Interface in ``sysfs`` - Per-policy control
+======================================================
 
 ``amd-pstate`` exposes several global attributes (files) in ``sysfs`` to
 control its functionality at the system level. They are located in the
@@ -262,6 +262,25 @@ lowest non-linear performance in `AMD CPPC Performance Capability
 <perf_cap_>`_.)
 This attribute is read-only.
 
+``energy_performance_available_preferences``
+
+A list of all the supported EPP preferences that could be used for
+``energy_performance_preference`` on this system.
+These profiles represent different hints that are provided
+to the low-level firmware about the user's desired energy vs efficiency
+tradeoff.  ``default`` represents the epp value is set by platform
+firmware. This attribute is read-only.
+
+``energy_performance_preference``
+
+The current energy performance preference can be read from this attribute.
+and user can change current preference according to energy or performance needs
+Please get all support profiles list from
+``energy_performance_available_preferences`` attribute, all the profiles are
+integer values defined between 0 to 255 when EPP feature is enabled by platform
+firmware, if EPP feature is disabled, driver will ignore the written value
+This attribute is read-write.
+
 Other performance and frequency values can be read back from
 ``/sys/devices/system/cpu/cpuX/acpi_cppc/``, see :ref:`cppc_sysfs`.
 
@@ -280,8 +299,30 @@ module which supports the new AMD P-States mechanism on most of the future AMD
 platforms. The AMD P-States mechanism is the more performance and energy
 efficiency frequency management method on AMD processors.
 
-Kernel Module Options for ``amd-pstate``
-=========================================
+
+AMD Pstate Driver Operation Modes
+=================================
+
+``amd_pstate`` CPPC has two operation modes: CPPC Autonomous(active) mode and
+CPPC non-autonomous(passive) mode.
+active mode and passive mode can be chosen by different kernel parameters.
+When in Autonomous mode, CPPC ignores requests done in the Desired Performance
+Target register and takes into account only the values set to the Minimum requested
+performance, Maximum requested performance, and Energy Performance Preference
+registers. When Autonomous is disabled, it only considers the Desired Performance Target.
+
+Active Mode
+------------
+
+``amd_pstate=active``
+
+This is the low-level firmware control mode which is implemented by ``amd_pstate_epp``
+driver with ``amd_pstate=active`` passed to the kernel in the command line.
+In this mode, ``amd_pstate_epp`` driver provides a hint to the hardware if software
+wants to bias toward performance (0x0) or energy efficiency (0xff) to the CPPC firmware.
+then CPPC power algorithm will calculate the runtime workload and adjust the realtime
+cores frequency according to the power supply and thermal, core voltage and some other
+hardware conditions.
 
 Passive Mode
 ------------
@@ -298,6 +339,35 @@ processor must provide at least nominal performance requested and go higher if c
 operating conditions allow.
 
 
+User Space Interface in ``sysfs`` - General
+===========================================
+
+Global Attributes
+-----------------
+
+``amd-pstate`` exposes several global attributes (files) in ``sysfs`` to
+control its functionality at the system level.  They are located in the
+``/sys/devices/system/cpu/amd-pstate/`` directory and affect all CPUs.
+
+``status``
+	Operation mode of the driver: "active", "passive" or "disable".
+
+	"active"
+		The driver is functional and in the ``active mode``
+
+	"passive"
+		The driver is functional and in the ``passive mode``
+
+	"disable"
+		The driver is unregistered and not functional now.
+
+        This attribute can be written to in order to change the driver's
+        operation mode or to unregister it.  The string written to it must be
+        one of the possible values of it and, if successful, writing one of
+        these values to the sysfs file will cause the driver to switch over
+        to the operation mode represented by that string - or to be
+        unregistered in the "disable" case.
+
 ``cpupower`` tool support for ``amd-pstate``
 ===============================================
 

Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml

@@ -26,8 +26,13 @@ properties:
         items:
           - enum:
               - qcom,qdu1000-cpufreq-epss
+              - qcom,sc7280-cpufreq-epss
+              - qcom,sc8280xp-cpufreq-epss
               - qcom,sm6375-cpufreq-epss
               - qcom,sm8250-cpufreq-epss
+              - qcom,sm8350-cpufreq-epss
+              - qcom,sm8450-cpufreq-epss
+              - qcom,sm8550-cpufreq-epss
           - const: qcom,cpufreq-epss
 
   reg:

Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml

@@ -17,6 +17,9 @@ description: |
   on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level
   according to the required OPPs defined in the CPU OPP tables.
 
+  For old implementation efuses are parsed to select the correct opp table and
+  voltage and CPR is not supported/used.
+
 select:
   properties:
     compatible:
@@ -33,7 +36,35 @@ select:
   required:
     - compatible
 
-properties:
+patternProperties:
+  '^opp-table(-[a-z0-9]+)?$':
+    allOf:
+      - if:
+          properties:
+            compatible:
+              const: operating-points-v2-kryo-cpu
+        then:
+          $ref: /schemas/opp/opp-v2-kryo-cpu.yaml#
+
+      - if:
+          properties:
+            compatible:
+              const: operating-points-v2-qcom-level
+        then:
+          $ref: /schemas/opp/opp-v2-qcom-level.yaml#
+
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs404
+
+    then:
+      properties:
         cpus:
           type: object
 
@@ -53,7 +84,7 @@ properties:
                 - power-domains
                 - power-domain-names
 
-patternProperties:
+      patternProperties:
         '^opp-table(-[a-z0-9]+)?$':
           if:
             properties:

Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml

@@ -50,12 +50,22 @@ patternProperties:
       opp-supported-hw:
         description: |
           A single 32 bit bitmap value, representing compatible HW.
-          Bitmap:
+          Bitmap for MSM8996 format:
           0:  MSM8996, speedbin 0
           1:  MSM8996, speedbin 1
           2:  MSM8996, speedbin 2
-          3-31:  unused
-        maximum: 0x7
+          3:  MSM8996, speedbin 3
+          4-31:  unused
+
+          Bitmap for MSM8996SG format (speedbin shifted of 4 left):
+          0-3:  unused
+          4:  MSM8996SG, speedbin 0
+          5:  MSM8996SG, speedbin 1
+          6:  MSM8996SG, speedbin 2
+          7-31:  unused
+        enum: [0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
+               0x9, 0xd, 0xe, 0xf,
+               0x10, 0x20, 0x30, 0x70]
 
       clock-latency-ns: true
 
@@ -106,6 +116,7 @@ examples:
                 L2_0: l2-cache {
                     compatible = "cache";
                     cache-level = <2>;
+                    cache-unified;
                 };
             };
 
@@ -140,6 +151,7 @@ examples:
                 L2_1: l2-cache {
                     compatible = "cache";
                     cache-level = <2>;
+                    cache-unified;
                 };
             };
 

Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml

@@ -30,7 +30,9 @@ patternProperties:
           this OPP node. Sometimes several corners/levels shares a certain fuse
           corner/level. A fuse corner/level contains e.g. ref uV, min uV,
           and max uV.
-        $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 2
 
     required:
       - opp-level

Documentation/power/suspend-and-interrupts.rst

@@ -67,7 +67,7 @@ That may involve turning on a special signal handling logic within the platform
 during system sleep so as to trigger a system wakeup when needed.  For example,
 the platform may include a dedicated interrupt controller used specifically for
 handling system wakeup events.  Then, if a given interrupt line is supposed to
-wake up the system from sleep sates, the corresponding input of that interrupt
+wake up the system from sleep states, the corresponding input of that interrupt
 controller needs to be enabled to receive signals from the line in question.
 After wakeup, it generally is better to disable that input to prevent the
 dedicated controller from triggering interrupts unnecessarily.

arch/mips/include/asm/mach-loongson32/cpufreq.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 CPUFreq platform support.
- */
-
-#ifndef __ASM_MACH_LOONGSON32_CPUFREQ_H
-#define __ASM_MACH_LOONGSON32_CPUFREQ_H
-
-struct plat_ls1x_cpufreq {
-	const char	*clk_name;	/* CPU clk */
-	const char	*osc_clk_name;	/* OSC clk */
-	unsigned int	max_freq;	/* in kHz */
-	unsigned int	min_freq;	/* in kHz */
-};
-
-#endif /* __ASM_MACH_LOONGSON32_CPUFREQ_H */

arch/mips/include/asm/mach-loongson32/platform.h

@@ -12,7 +12,6 @@
 #include <nand.h>
 
 extern struct platform_device ls1x_uart_pdev;
-extern struct platform_device ls1x_cpufreq_pdev;
 extern struct platform_device ls1x_eth0_pdev;
 extern struct platform_device ls1x_eth1_pdev;
 extern struct platform_device ls1x_ehci_pdev;

arch/mips/loongson32/common/platform.c

@@ -15,7 +15,6 @@
 
 #include <platform.h>
 #include <loongson1.h>
-#include <cpufreq.h>
 #include <dma.h>
 #include <nand.h>
 
@@ -62,21 +61,6 @@ void __init ls1x_serial_set_uartclk(struct platform_device *pdev)
 		p->uartclk = clk_get_rate(clk);
 }
 
-/* CPUFreq */
-static struct plat_ls1x_cpufreq ls1x_cpufreq_pdata = {
-	.clk_name	= "cpu_clk",
-	.osc_clk_name	= "osc_clk",
-	.max_freq	= 266 * 1000,
-	.min_freq	= 33 * 1000,
-};
-
-struct platform_device ls1x_cpufreq_pdev = {
-	.name		= "ls1x-cpufreq",
-	.dev		= {
-		.platform_data = &ls1x_cpufreq_pdata,
-	},
-};
-
 /* Synopsys Ethernet GMAC */
 static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
 	.phy_mask	= 0,

arch/mips/loongson32/ls1b/board.c

@@ -35,7 +35,6 @@ static const struct gpio_led_platform_data ls1x_led_pdata __initconst = {
 
 static struct platform_device *ls1b_platform_devices[] __initdata = {
 	&ls1x_uart_pdev,
-	&ls1x_cpufreq_pdev,
 	&ls1x_eth0_pdev,
 	&ls1x_eth1_pdev,
 	&ls1x_ehci_pdev,

arch/x86/kernel/process.c

@@ -739,6 +739,7 @@ void __cpuidle arch_cpu_idle(void)
 {
 	static_call(x86_idle)();
 }
+EXPORT_SYMBOL_GPL(arch_cpu_idle);
 
 #ifdef CONFIG_XEN
 bool xen_set_default_idle(void)

drivers/acpi/cppc_acpi.c

@@ -1153,6 +1153,19 @@ int cppc_get_nominal_perf(int cpunum, u64 *nominal_perf)
 	return cppc_get_perf(cpunum, NOMINAL_PERF, nominal_perf);
 }
 
+/**
+ * cppc_get_epp_perf - Get the epp register value.
+ * @cpunum: CPU from which to get epp preference value.
+ * @epp_perf: Return address.
+ *
+ * Return: 0 for success, -EIO otherwise.
+ */
+int cppc_get_epp_perf(int cpunum, u64 *epp_perf)
+{
+	return cppc_get_perf(cpunum, ENERGY_PERF, epp_perf);
+}
+EXPORT_SYMBOL_GPL(cppc_get_epp_perf);
+
 /**
  * cppc_get_perf_caps - Get a CPU's performance capabilities.
  * @cpunum: CPU from which to get capabilities info.
@@ -1365,6 +1378,60 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
 }
 EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs);
 
+/*
+ * Set Energy Performance Preference Register value through
+ * Performance Controls Interface
+ */
+int cppc_set_epp_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls, bool enable)
+{
+	int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
+	struct cpc_register_resource *epp_set_reg;
+	struct cpc_register_resource *auto_sel_reg;
+	struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
+	struct cppc_pcc_data *pcc_ss_data = NULL;
+	int ret;
+
+	if (!cpc_desc) {
+		pr_debug("No CPC descriptor for CPU:%d\n", cpu);
+		return -ENODEV;
+	}
+
+	auto_sel_reg = &cpc_desc->cpc_regs[AUTO_SEL_ENABLE];
+	epp_set_reg = &cpc_desc->cpc_regs[ENERGY_PERF];
+
+	if (CPC_IN_PCC(epp_set_reg) || CPC_IN_PCC(auto_sel_reg)) {
+		if (pcc_ss_id < 0) {
+			pr_debug("Invalid pcc_ss_id for CPU:%d\n", cpu);
+			return -ENODEV;
+		}
+
+		if (CPC_SUPPORTED(auto_sel_reg)) {
+			ret = cpc_write(cpu, auto_sel_reg, enable);
+			if (ret)
+				return ret;
+		}
+
+		if (CPC_SUPPORTED(epp_set_reg)) {
+			ret = cpc_write(cpu, epp_set_reg, perf_ctrls->energy_perf);
+			if (ret)
+				return ret;
+		}
+
+		pcc_ss_data = pcc_data[pcc_ss_id];
+
+		down_write(&pcc_ss_data->pcc_lock);
+		/* after writing CPC, transfer the ownership of PCC to platform */
+		ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
+		up_write(&pcc_ss_data->pcc_lock);
+	} else {
+		ret = -ENOTSUPP;
+		pr_debug("_CPC in PCC is not supported\n");
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cppc_set_epp_perf);
+
 /**
  * cppc_set_enable - Set to enable CPPC on the processor by writing the
  * Continuous Performance Control package EnableRegister field.

drivers/base/power/domain.c

@@ -220,13 +220,10 @@ static void genpd_debug_add(struct generic_pm_domain *genpd);
 
 static void genpd_debug_remove(struct generic_pm_domain *genpd)
 {
-	struct dentry *d;
-
 	if (!genpd_debugfs_dir)
 		return;
 
-	d = debugfs_lookup(genpd->name, genpd_debugfs_dir);
-	debugfs_remove(d);
+	debugfs_lookup_and_remove(genpd->name, genpd_debugfs_dir);
 }
 
 static void genpd_update_accounting(struct generic_pm_domain *genpd)

drivers/base/power/runtime.c

@@ -1864,6 +1864,10 @@ static bool pm_runtime_need_not_resume(struct device *dev)
  * sure the device is put into low power state and it should only be used during
  * system-wide PM transitions to sleep states.  It assumes that the analogous
  * pm_runtime_force_resume() will be used to resume the device.
+ *
+ * Do not use with DPM_FLAG_SMART_SUSPEND as this can lead to an inconsistent
+ * state where this function has called the ->runtime_suspend callback but the
+ * PM core marks the driver as runtime active.
  */
 int pm_runtime_force_suspend(struct device *dev)
 {

drivers/cpufreq/Kconfig

@@ -3,7 +3,6 @@ menu "CPU Frequency scaling"
 
 config CPU_FREQ
 	bool "CPU Frequency scaling"
-	select SRCU
 	help
 	  CPU Frequency scaling allows you to change the clock speed of 
 	  CPUs on the fly. This is a nice method to save power, because 
@@ -270,15 +269,6 @@ config LOONGSON2_CPUFREQ
 
 	  Loongson2F and its successors support this feature.
 
-	  If in doubt, say N.
-
-config LOONGSON1_CPUFREQ
-	tristate "Loongson1 CPUFreq Driver"
-	depends on LOONGSON1_LS1B
-	help
-	  This option adds a CPUFreq driver for loongson1 processors which
-	  support software configurable cpu frequency.
-
 	  If in doubt, say N.
 endif
 

drivers/cpufreq/Makefile

@@ -104,7 +104,6 @@ obj-$(CONFIG_POWERNV_CPUFREQ)		+= powernv-cpufreq.o
 obj-$(CONFIG_BMIPS_CPUFREQ)		+= bmips-cpufreq.o
 obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
 obj-$(CONFIG_LOONGSON2_CPUFREQ)		+= loongson2_cpufreq.o
-obj-$(CONFIG_LOONGSON1_CPUFREQ)		+= loongson1-cpufreq.o
 obj-$(CONFIG_SH_CPU_FREQ)		+= sh-cpufreq.o
 obj-$(CONFIG_SPARC_US2E_CPUFREQ)	+= sparc-us2e-cpufreq.o
 obj-$(CONFIG_SPARC_US3_CPUFREQ)		+= sparc-us3-cpufreq.o

drivers/cpufreq/brcmstb-avs-cpufreq.c

@@ -751,10 +751,7 @@ static int brcm_avs_cpufreq_probe(struct platform_device *pdev)
 
 static int brcm_avs_cpufreq_remove(struct platform_device *pdev)
 {
-	int ret;
-
-	ret = cpufreq_unregister_driver(&brcm_avs_driver);
-	WARN_ON(ret);
+	cpufreq_unregister_driver(&brcm_avs_driver);
 
 	brcm_avs_prepare_uninit(pdev);
 

drivers/cpufreq/cpufreq.c

@@ -993,7 +993,7 @@ static const struct sysfs_ops sysfs_ops = {
 	.store	= store,
 };
 
-static struct kobj_type ktype_cpufreq = {
+static const struct kobj_type ktype_cpufreq = {
 	.sysfs_ops	= &sysfs_ops,
 	.default_groups	= cpufreq_groups,
 	.release	= cpufreq_sysfs_release,
@@ -2904,12 +2904,12 @@ EXPORT_SYMBOL_GPL(cpufreq_register_driver);
  * Returns zero if successful, and -EINVAL if the cpufreq_driver is
  * currently not initialised.
  */
-int cpufreq_unregister_driver(struct cpufreq_driver *driver)
+void cpufreq_unregister_driver(struct cpufreq_driver *driver)
 {
 	unsigned long flags;
 
-	if (!cpufreq_driver || (driver != cpufreq_driver))
-		return -EINVAL;
+	if (WARN_ON(!cpufreq_driver || (driver != cpufreq_driver)))
+		return;
 
 	pr_debug("unregistering driver %s\n", driver->name);
 
@@ -2926,8 +2926,6 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver)
 
 	write_unlock_irqrestore(&cpufreq_driver_lock, flags);
 	cpus_read_unlock();
-
-	return 0;
 }
 EXPORT_SYMBOL_GPL(cpufreq_unregister_driver);
 

drivers/cpufreq/davinci-cpufreq.c

@@ -133,12 +133,14 @@ static int __init davinci_cpufreq_probe(struct platform_device *pdev)
 
 static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
 {
+	cpufreq_unregister_driver(&davinci_driver);
+
 	clk_put(cpufreq.armclk);
 
 	if (cpufreq.asyncclk)
 		clk_put(cpufreq.asyncclk);
 
-	return cpufreq_unregister_driver(&davinci_driver);
+	return 0;
 }
 
 static struct platform_driver davinci_cpufreq_driver = {

drivers/cpufreq/loongson1-cpufreq.c

-/*
- * CPU Frequency Scaling for Loongson 1 SoC
- *
- * Copyright (C) 2014-2016 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/cpu.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <cpufreq.h>
-#include <loongson1.h>
-
-struct ls1x_cpufreq {
-	struct device *dev;
-	struct clk *clk;	/* CPU clk */
-	struct clk *mux_clk;	/* MUX of CPU clk */
-	struct clk *pll_clk;	/* PLL clk */
-	struct clk *osc_clk;	/* OSC clk */
-	unsigned int max_freq;
-	unsigned int min_freq;
-};
-
-static struct ls1x_cpufreq *cpufreq;
-
-static int ls1x_cpufreq_notifier(struct notifier_block *nb,
-				 unsigned long val, void *data)
-{
-	if (val == CPUFREQ_POSTCHANGE)
-		current_cpu_data.udelay_val = loops_per_jiffy;
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block ls1x_cpufreq_notifier_block = {
-	.notifier_call = ls1x_cpufreq_notifier
-};
-
-static int ls1x_cpufreq_target(struct cpufreq_policy *policy,
-			       unsigned int index)
-{
-	struct device *cpu_dev = get_cpu_device(policy->cpu);
-	unsigned int old_freq, new_freq;
-
-	old_freq = policy->cur;
-	new_freq = policy->freq_table[index].frequency;
-
-	/*
-	 * The procedure of reconfiguring CPU clk is as below.
-	 *
-	 *  - Reparent CPU clk to OSC clk
-	 *  - Reset CPU clock (very important)
-	 *  - Reconfigure CPU DIV
-	 *  - Reparent CPU clk back to CPU DIV clk
-	 */
-
-	clk_set_parent(policy->clk, cpufreq->osc_clk);
-	__raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) | RST_CPU_EN | RST_CPU,
-		     LS1X_CLK_PLL_DIV);
-	__raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) & ~(RST_CPU_EN | RST_CPU),
-		     LS1X_CLK_PLL_DIV);
-	clk_set_rate(cpufreq->mux_clk, new_freq * 1000);
-	clk_set_parent(policy->clk, cpufreq->mux_clk);
-	dev_dbg(cpu_dev, "%u KHz --> %u KHz\n", old_freq, new_freq);
-
-	return 0;
-}
-
-static int ls1x_cpufreq_init(struct cpufreq_policy *policy)
-{
-	struct device *cpu_dev = get_cpu_device(policy->cpu);
-	struct cpufreq_frequency_table *freq_tbl;
-	unsigned int pll_freq, freq;
-	int steps, i;
-
-	pll_freq = clk_get_rate(cpufreq->pll_clk) / 1000;
-
-	steps = 1 << DIV_CPU_WIDTH;
-	freq_tbl = kcalloc(steps, sizeof(*freq_tbl), GFP_KERNEL);
-	if (!freq_tbl)
-		return -ENOMEM;
-
-	for (i = 0; i < (steps - 1); i++) {
-		freq = pll_freq / (i + 1);
-		if ((freq < cpufreq->min_freq) || (freq > cpufreq->max_freq))
-			freq_tbl[i].frequency = CPUFREQ_ENTRY_INVALID;
-		else
-			freq_tbl[i].frequency = freq;
-		dev_dbg(cpu_dev,
-			"cpufreq table: index %d: frequency %d\n", i,
-			freq_tbl[i].frequency);
-	}
-	freq_tbl[i].frequency = CPUFREQ_TABLE_END;
-
-	policy->clk = cpufreq->clk;
-	cpufreq_generic_init(policy, freq_tbl, 0);
-
-	return 0;
-}
-
-static int ls1x_cpufreq_exit(struct cpufreq_policy *policy)
-{
-	kfree(policy->freq_table);
-	return 0;
-}
-
-static struct cpufreq_driver ls1x_cpufreq_driver = {
-	.name		= "cpufreq-ls1x",
-	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
-	.verify		= cpufreq_generic_frequency_table_verify,
-	.target_index	= ls1x_cpufreq_target,
-	.get		= cpufreq_generic_get,
-	.init		= ls1x_cpufreq_init,
-	.exit		= ls1x_cpufreq_exit,
-	.attr		= cpufreq_generic_attr,
-};
-
-static int ls1x_cpufreq_remove(struct platform_device *pdev)
-{
-	cpufreq_unregister_notifier(&ls1x_cpufreq_notifier_block,
-				    CPUFREQ_TRANSITION_NOTIFIER);
-	cpufreq_unregister_driver(&ls1x_cpufreq_driver);
-
-	return 0;
-}
-
-static int ls1x_cpufreq_probe(struct platform_device *pdev)
-{
-	struct plat_ls1x_cpufreq *pdata = dev_get_platdata(&pdev->dev);
-	struct clk *clk;
-	int ret;
-
-	if (!pdata || !pdata->clk_name || !pdata->osc_clk_name) {
-		dev_err(&pdev->dev, "platform data missing\n");
-		return -EINVAL;
-	}
-
-	cpufreq =
-	    devm_kzalloc(&pdev->dev, sizeof(struct ls1x_cpufreq), GFP_KERNEL);
-	if (!cpufreq)
-		return -ENOMEM;
-
-	cpufreq->dev = &pdev->dev;
-
-	clk = devm_clk_get(&pdev->dev, pdata->clk_name);
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "unable to get %s clock\n",
-			pdata->clk_name);
-		return PTR_ERR(clk);
-	}
-	cpufreq->clk = clk;
-
-	clk = clk_get_parent(clk);
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "unable to get parent of %s clock\n",
-			__clk_get_name(cpufreq->clk));
-		return PTR_ERR(clk);
-	}
-	cpufreq->mux_clk = clk;
-
-	clk = clk_get_parent(clk);
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "unable to get parent of %s clock\n",
-			__clk_get_name(cpufreq->mux_clk));
-		return PTR_ERR(clk);
-	}
-	cpufreq->pll_clk = clk;
-
-	clk = devm_clk_get(&pdev->dev, pdata->osc_clk_name);
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "unable to get %s clock\n",
-			pdata->osc_clk_name);
-		return PTR_ERR(clk);
-	}
-	cpufreq->osc_clk = clk;
-
-	cpufreq->max_freq = pdata->max_freq;
-	cpufreq->min_freq = pdata->min_freq;
-
-	ret = cpufreq_register_driver(&ls1x_cpufreq_driver);
-	if (ret) {
-		dev_err(&pdev->dev,
-			"failed to register CPUFreq driver: %d\n", ret);
-		return ret;
-	}
-
-	ret = cpufreq_register_notifier(&ls1x_cpufreq_notifier_block,
-					CPUFREQ_TRANSITION_NOTIFIER);
-
-	if (ret) {
-		dev_err(&pdev->dev,
-			"failed to register CPUFreq notifier: %d\n",ret);
-		cpufreq_unregister_driver(&ls1x_cpufreq_driver);
-	}
-
-	return ret;
-}
-
-static struct platform_driver ls1x_cpufreq_platdrv = {
-	.probe	= ls1x_cpufreq_probe,
-	.remove	= ls1x_cpufreq_remove,
-	.driver	= {
-		.name	= "ls1x-cpufreq",
-	},
-};
-
-module_platform_driver(ls1x_cpufreq_platdrv);
-
-MODULE_ALIAS("platform:ls1x-cpufreq");
-MODULE_AUTHOR("Kelvin Cheung <keguang.zhang@gmail.com>");
-MODULE_DESCRIPTION("Loongson1 CPUFreq driver");
-MODULE_LICENSE("GPL");

drivers/cpufreq/mediatek-cpufreq-hw.c

@@ -317,13 +317,16 @@ static int mtk_cpufreq_hw_driver_probe(struct platform_device *pdev)
 
 static int mtk_cpufreq_hw_driver_remove(struct platform_device *pdev)
 {
-	return cpufreq_unregister_driver(&cpufreq_mtk_hw_driver);
+	cpufreq_unregister_driver(&cpufreq_mtk_hw_driver);
+
+	return 0;
 }
 
 static const struct of_device_id mtk_cpufreq_hw_match[] = {
 	{ .compatible = "mediatek,cpufreq-hw", .data = &cpufreq_mtk_offsets },
 	{}
 };
+MODULE_DEVICE_TABLE(of, mtk_cpufreq_hw_match);
 
 static struct platform_driver mtk_cpufreq_hw_driver = {
 	.probe = mtk_cpufreq_hw_driver_probe,

drivers/cpufreq/omap-cpufreq.c

@@ -184,7 +184,9 @@ static int omap_cpufreq_probe(struct platform_device *pdev)
 
 static int omap_cpufreq_remove(struct platform_device *pdev)
 {
-	return cpufreq_unregister_driver(&omap_driver);
+	cpufreq_unregister_driver(&omap_driver);
+
+	return 0;
 }
 
 static struct platform_driver omap_cpufreq_platdrv = {

drivers/cpufreq/qcom-cpufreq-hw.c

@@ -770,7 +770,9 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
 
 static int qcom_cpufreq_hw_driver_remove(struct platform_device *pdev)
 {
-	return cpufreq_unregister_driver(&cpufreq_qcom_hw_driver);
+	cpufreq_unregister_driver(&cpufreq_qcom_hw_driver);
+
+	return 0;
 }
 
 static struct platform_driver qcom_cpufreq_hw_driver = {

drivers/cpufreq/tegra194-cpufreq.c

@@ -411,7 +411,8 @@ static int tegra194_cpufreq_set_target(struct cpufreq_policy *policy,
 
 static struct cpufreq_driver tegra194_cpufreq_driver = {
 	.name = "tegra194",
-	.flags = CPUFREQ_CONST_LOOPS | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.flags = CPUFREQ_CONST_LOOPS | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		 CPUFREQ_IS_COOLING_DEV,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = tegra194_cpufreq_set_target,
 	.get = tegra194_get_speed,

drivers/cpuidle/Kconfig

@@ -74,6 +74,7 @@ endmenu
 config HALTPOLL_CPUIDLE
 	tristate "Halt poll cpuidle driver"
 	depends on X86 && KVM_GUEST
+	select CPU_IDLE_GOV_HALTPOLL
 	default y
 	help
 	 This option enables halt poll cpuidle driver, which allows to poll

drivers/cpuidle/Kconfig.arm

@@ -24,6 +24,14 @@ config ARM_PSCI_CPUIDLE
 	  It provides an idle driver that is capable of detecting and
 	  managing idle states through the PSCI firmware interface.
 
+	  The driver has limitations when used with PREEMPT_RT:
+	  - If the idle states are described with the non-hierarchical layout,
+	    all idle states are still available.
+
+	  - If the idle states are described with the hierarchical layout,
+	    only the idle states defined per CPU are available, but not the ones
+	    being shared among a group of CPUs (aka cluster idle states).
+
 config ARM_PSCI_CPUIDLE_DOMAIN
 	bool "PSCI CPU idle Domain"
 	depends on ARM_PSCI_CPUIDLE
@@ -102,6 +110,7 @@ config ARM_MVEBU_V7_CPUIDLE
 config ARM_TEGRA_CPUIDLE
 	bool "CPU Idle Driver for NVIDIA Tegra SoCs"
 	depends on (ARCH_TEGRA || COMPILE_TEST) && !ARM64 && MMU
+	depends on ARCH_SUSPEND_POSSIBLE
 	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 	select ARM_CPU_SUSPEND
 	help
@@ -110,6 +119,7 @@ config ARM_TEGRA_CPUIDLE
 config ARM_QCOM_SPM_CPUIDLE
 	bool "CPU Idle Driver for Qualcomm Subsystem Power Manager (SPM)"
 	depends on (ARCH_QCOM || COMPILE_TEST) && !ARM64 && MMU
+	depends on ARCH_SUSPEND_POSSIBLE
 	select ARM_CPU_SUSPEND
 	select CPU_IDLE_MULTIPLE_DRIVERS
 	select DT_IDLE_STATES

drivers/cpuidle/cpuidle-haltpoll.c

@@ -32,7 +32,7 @@ static int default_enter_idle(struct cpuidle_device *dev,
 		local_irq_enable();
 		return index;
 	}
-	default_idle();
+	arch_cpu_idle();
 	return index;
 }
 

drivers/cpuidle/cpuidle-psci-domain.c

@@ -64,8 +64,11 @@ static int psci_pd_init(struct device_node *np, bool use_osi)
 
 	pd->flags |= GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_CPU_DOMAIN;
 
-	/* Allow power off when OSI has been successfully enabled. */
-	if (use_osi)
+	/*
+	 * Allow power off when OSI has been successfully enabled.
+	 * PREEMPT_RT is not yet ready to enter domain idle states.
+	 */
+	if (use_osi && !IS_ENABLED(CONFIG_PREEMPT_RT))
 		pd->power_off = psci_pd_power_off;
 	else
 		pd->flags |= GENPD_FLAG_ALWAYS_ON;

drivers/cpuidle/cpuidle-psci.c

@@ -222,6 +222,9 @@ static int psci_dt_cpu_init_topology(struct cpuidle_driver *drv,
 	if (!psci_has_osi_support())
 		return 0;
 
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		return 0;
+
 	data->dev = psci_dt_attach_cpu(cpu);
 	if (IS_ERR_OR_NULL(data->dev))
 		return PTR_ERR_OR_ZERO(data->dev);

drivers/cpuidle/driver.c

@@ -183,11 +183,15 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv)
 			s->target_residency_ns = s->target_residency * NSEC_PER_USEC;
 		else if (s->target_residency_ns < 0)
 			s->target_residency_ns = 0;
+		else
+			s->target_residency = div_u64(s->target_residency_ns, NSEC_PER_USEC);
 
 		if (s->exit_latency > 0)
 			s->exit_latency_ns = s->exit_latency * NSEC_PER_USEC;
 		else if (s->exit_latency_ns < 0)
 			s->exit_latency_ns =  0;
+		else
+			s->exit_latency = div_u64(s->exit_latency_ns, NSEC_PER_USEC);
 	}
 }
 

drivers/cpuidle/governors/teo.c

@@ -2,8 +2,13 @@
 /*
  * Timer events oriented CPU idle governor
  *
+ * TEO governor:
  * Copyright (C) 2018 - 2021 Intel Corporation
  * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * Util-awareness mechanism:
+ * Copyright (C) 2022 Arm Ltd.
+ * Author: Kajetan Puchalski <kajetan.puchalski@arm.com>
  */
 
 /**
@@ -99,14 +104,55 @@
  *      select the given idle state instead of the candidate one.
  *
  * 3. By default, select the candidate state.
+ *
+ * Util-awareness mechanism:
+ *
+ * The idea behind the util-awareness extension is that there are two distinct
+ * scenarios for the CPU which should result in two different approaches to idle
+ * state selection - utilized and not utilized.
+ *
+ * In this case, 'utilized' means that the average runqueue util of the CPU is
+ * above a certain threshold.
+ *
+ * When the CPU is utilized while going into idle, more likely than not it will
+ * be woken up to do more work soon and so a shallower idle state should be
+ * selected to minimise latency and maximise performance. When the CPU is not
+ * being utilized, the usual metrics-based approach to selecting the deepest
+ * available idle state should be preferred to take advantage of the power
+ * saving.
+ *
+ * In order to achieve this, the governor uses a utilization threshold.
+ * The threshold is computed per-CPU as a percentage of the CPU's capacity
+ * by bit shifting the capacity value. Based on testing, the shift of 6 (~1.56%)
+ * seems to be getting the best results.
+ *
+ * Before selecting the next idle state, the governor compares the current CPU
+ * util to the precomputed util threshold. If it's below, it defaults to the
+ * TEO metrics mechanism. If it's above, the closest shallower idle state will
+ * be selected instead, as long as is not a polling state.
  */
 
 #include <linux/cpuidle.h>
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/sched/clock.h>
+#include <linux/sched/topology.h>
 #include <linux/tick.h>
 
+/*
+ * The number of bits to shift the CPU's capacity by in order to determine
+ * the utilized threshold.
+ *
+ * 6 was chosen based on testing as the number that achieved the best balance
+ * of power and performance on average.
+ *
+ * The resulting threshold is high enough to not be triggered by background
+ * noise and low enough to react quickly when activity starts to ramp up.
+ */
+#define UTIL_THRESHOLD_SHIFT 6
+
+
 /*
  * The PULSE value is added to metrics when they grow and the DECAY_SHIFT value
  * is used for decreasing metrics on a regular basis.
@@ -137,9 +183,11 @@ struct teo_bin {
  * @time_span_ns: Time between idle state selection and post-wakeup update.
  * @sleep_length_ns: Time till the closest timer event (at the selection time).
  * @state_bins: Idle state data bins for this CPU.
- * @total: Grand total of the "intercepts" and "hits" mertics for all bins.
+ * @total: Grand total of the "intercepts" and "hits" metrics for all bins.
  * @next_recent_idx: Index of the next @recent_idx entry to update.
  * @recent_idx: Indices of bins corresponding to recent "intercepts".
+ * @util_threshold: Threshold above which the CPU is considered utilized
+ * @utilized: Whether the last sleep on the CPU happened while utilized
  */
 struct teo_cpu {
 	s64 time_span_ns;
@@ -148,10 +196,29 @@ struct teo_cpu {
 	unsigned int total;
 	int next_recent_idx;
 	int recent_idx[NR_RECENT];
+	unsigned long util_threshold;
+	bool utilized;
 };
 
 static DEFINE_PER_CPU(struct teo_cpu, teo_cpus);
 
+/**
+ * teo_cpu_is_utilized - Check if the CPU's util is above the threshold
+ * @cpu: Target CPU
+ * @cpu_data: Governor CPU data for the target CPU
+ */
+#ifdef CONFIG_SMP
+static bool teo_cpu_is_utilized(int cpu, struct teo_cpu *cpu_data)
+{
+	return sched_cpu_util(cpu) > cpu_data->util_threshold;
+}
+#else
+static bool teo_cpu_is_utilized(int cpu, struct teo_cpu *cpu_data)
+{
+	return false;
+}
+#endif
+
 /**
  * teo_update - Update CPU metrics after wakeup.
  * @drv: cpuidle driver containing state data.
@@ -258,15 +325,17 @@ static s64 teo_middle_of_bin(int idx, struct cpuidle_driver *drv)
  * @dev: Target CPU.
  * @state_idx: Index of the capping idle state.
  * @duration_ns: Idle duration value to match.
+ * @no_poll: Don't consider polling states.
  */
 static int teo_find_shallower_state(struct cpuidle_driver *drv,
 				    struct cpuidle_device *dev, int state_idx,
-				    s64 duration_ns)
+				    s64 duration_ns, bool no_poll)
 {
 	int i;
 
 	for (i = state_idx - 1; i >= 0; i--) {
-		if (dev->states_usage[i].disable)
+		if (dev->states_usage[i].disable ||
+				(no_poll && drv->states[i].flags & CPUIDLE_FLAG_POLLING))
 			continue;
 
 		state_idx = i;
@@ -321,6 +390,22 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 			goto end;
 	}
 
+	cpu_data->utilized = teo_cpu_is_utilized(dev->cpu, cpu_data);
+	/*
+	 * If the CPU is being utilized over the threshold and there are only 2
+	 * states to choose from, the metrics need not be considered, so choose
+	 * the shallowest non-polling state and exit.
+	 */
+	if (drv->state_count < 3 && cpu_data->utilized) {
+		for (i = 0; i < drv->state_count; ++i) {
+			if (!dev->states_usage[i].disable &&
+			    !(drv->states[i].flags & CPUIDLE_FLAG_POLLING)) {
+				idx = i;
+				goto end;
+			}
+		}
+	}
+
 	/*
 	 * Find the deepest idle state whose target residency does not exceed
 	 * the current sleep length and the deepest idle state not deeper than
@@ -452,6 +537,13 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 	if (idx > constraint_idx)
 		idx = constraint_idx;
 
+	/*
+	 * If the CPU is being utilized over the threshold, choose a shallower
+	 * non-polling state to improve latency
+	 */
+	if (cpu_data->utilized)
+		idx = teo_find_shallower_state(drv, dev, idx, duration_ns, true);
+
 end:
 	/*
 	 * Don't stop the tick if the selected state is a polling one or if the
@@ -469,7 +561,7 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev,
 		 */
 		if (idx > idx0 &&
 		    drv->states[idx].target_residency_ns > delta_tick)
-			idx = teo_find_shallower_state(drv, dev, idx, delta_tick);
+			idx = teo_find_shallower_state(drv, dev, idx, delta_tick, false);
 	}
 
 	return idx;
@@ -508,9 +600,11 @@ static int teo_enable_device(struct cpuidle_driver *drv,
 			     struct cpuidle_device *dev)
 {
 	struct teo_cpu *cpu_data = per_cpu_ptr(&teo_cpus, dev->cpu);
+	unsigned long max_capacity = arch_scale_cpu_capacity(dev->cpu);
 	int i;
 
 	memset(cpu_data, 0, sizeof(*cpu_data));
+	cpu_data->util_threshold = max_capacity >> UTIL_THRESHOLD_SHIFT;
 
 	for (i = 0; i < NR_RECENT; i++)
 		cpu_data->recent_idx[i] = -1;

drivers/cpuidle/sysfs.c

@@ -200,7 +200,7 @@ static void cpuidle_sysfs_release(struct kobject *kobj)
 	complete(&kdev->kobj_unregister);
 }
 
-static struct kobj_type ktype_cpuidle = {
+static const struct kobj_type ktype_cpuidle = {
 	.sysfs_ops = &cpuidle_sysfs_ops,
 	.release = cpuidle_sysfs_release,
 };
@@ -447,7 +447,7 @@ static void cpuidle_state_sysfs_release(struct kobject *kobj)
 	complete(&state_obj->kobj_unregister);
 }
 
-static struct kobj_type ktype_state_cpuidle = {
+static const struct kobj_type ktype_state_cpuidle = {
 	.sysfs_ops = &cpuidle_state_sysfs_ops,
 	.default_groups = cpuidle_state_default_groups,
 	.release = cpuidle_state_sysfs_release,
@@ -594,7 +594,7 @@ static struct attribute *cpuidle_driver_default_attrs[] = {
 };
 ATTRIBUTE_GROUPS(cpuidle_driver_default);
 
-static struct kobj_type ktype_driver_cpuidle = {
+static const struct kobj_type ktype_driver_cpuidle = {
 	.sysfs_ops = &cpuidle_driver_sysfs_ops,
 	.default_groups = cpuidle_driver_default_groups,
 	.release = cpuidle_driver_sysfs_release,

drivers/idle/intel_idle.c

@@ -1424,6 +1424,7 @@ static const struct x86_cpu_id intel_idle_ids[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L,		&idle_cpu_adl_l),
 	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_N,		&idle_cpu_adl_n),
 	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X,	&idle_cpu_spr),
+	X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X,	&idle_cpu_spr),
 	X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNL,	&idle_cpu_knl),
 	X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNM,	&idle_cpu_knl),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT,	&idle_cpu_bxt),
@@ -1859,6 +1860,7 @@ static void __init intel_idle_init_cstates_icpu(struct cpuidle_driver *drv)
 		skx_idle_state_table_update();
 		break;
 	case INTEL_FAM6_SAPPHIRERAPIDS_X:
+	case INTEL_FAM6_EMERALDRAPIDS_X:
 		spr_idle_state_table_update();
 		break;
 	case INTEL_FAM6_ALDERLAKE:

drivers/opp/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
 config PM_OPP
 	bool
-	select SRCU
 	help
 	  SOCs have a standard set of tuples consisting of frequency and
 	  voltage pairs that the device will support per voltage domain. This

drivers/opp/debugfs.c

@@ -235,7 +235,7 @@ static void opp_migrate_dentry(struct opp_device *opp_dev,
 
 	dentry = debugfs_rename(rootdir, opp_dev->dentry, rootdir,
 				opp_table->dentry_name);
-	if (!dentry) {
+	if (IS_ERR(dentry)) {
 		dev_err(dev, "%s: Failed to rename link from: %s to %s\n",
 			__func__, dev_name(opp_dev->dev), dev_name(dev));
 		return;

drivers/powercap/idle_inject.c

@@ -155,10 +155,12 @@ void idle_inject_set_duration(struct idle_inject_device *ii_dev,
 			      unsigned int run_duration_us,
 			      unsigned int idle_duration_us)
 {
-	if (run_duration_us && idle_duration_us) {
+	if (run_duration_us + idle_duration_us) {
 		WRITE_ONCE(ii_dev->run_duration_us, run_duration_us);
 		WRITE_ONCE(ii_dev->idle_duration_us, idle_duration_us);
 	}
+	if (!run_duration_us)
+		pr_debug("CPU is forced to 100 percent idle\n");
 }
 
 /**
@@ -201,7 +203,7 @@ int idle_inject_start(struct idle_inject_device *ii_dev)
 	unsigned int idle_duration_us = READ_ONCE(ii_dev->idle_duration_us);
 	unsigned int run_duration_us = READ_ONCE(ii_dev->run_duration_us);
 
-	if (!idle_duration_us || !run_duration_us)
+	if (!(idle_duration_us + run_duration_us))
 		return -EINVAL;
 
 	pr_debug("Starting injecting idle cycles on CPUs '%*pbl'\n",

drivers/powercap/intel_rapl_common.c

@@ -999,7 +999,15 @@ static u64 rapl_compute_time_window_core(struct rapl_package *rp, u64 value,
 
 		do_div(value, rp->time_unit);
 		y = ilog2(value);
-		f = div64_u64(4 * (value - (1 << y)), 1 << y);
+
+		/*
+		 * The target hardware field is 7 bits wide, so return all ones
+		 * if the exponent is too large.
+		 */
+		if (y > 0x1f)
+			return 0x7f;
+
+		f = div64_u64(4 * (value - (1ULL << y)), 1ULL << y);
 		value = (y & 0x1f) | ((f & 0x3) << 5);
 	}
 	return value;
@@ -1113,7 +1121,10 @@ static const struct x86_cpu_id rapl_ids[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE,		&rapl_defaults_core),
 	X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_P,        &rapl_defaults_core),
 	X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_S,	&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(METEORLAKE,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(METEORLAKE_L,	&rapl_defaults_core),
 	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X,	&rapl_defaults_spr_server),
+	X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X,	&rapl_defaults_spr_server),
 	X86_MATCH_INTEL_FAM6_MODEL(LAKEFIELD,		&rapl_defaults_core),
 
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT,	&rapl_defaults_byt),

drivers/powercap/powercap_sys.c

@@ -530,9 +530,6 @@ struct powercap_zone *powercap_register_zone(
 	power_zone->name = kstrdup(name, GFP_KERNEL);
 	if (!power_zone->name)
 		goto err_name_alloc;
-	dev_set_name(&power_zone->dev, "%s:%x",
-					dev_name(power_zone->dev.parent),
-					power_zone->id);
 	power_zone->constraints = kcalloc(nr_constraints,
 					  sizeof(*power_zone->constraints),
 					  GFP_KERNEL);
@@ -555,9 +552,16 @@ struct powercap_zone *powercap_register_zone(
 	power_zone->dev_attr_groups[0] = &power_zone->dev_zone_attr_group;
 	power_zone->dev_attr_groups[1] = NULL;
 	power_zone->dev.groups = power_zone->dev_attr_groups;
+	dev_set_name(&power_zone->dev, "%s:%x",
+					dev_name(power_zone->dev.parent),
+					power_zone->id);
 	result = device_register(&power_zone->dev);
-	if (result)
-		goto err_dev_ret;
+	if (result) {
+		put_device(&power_zone->dev);
+		mutex_unlock(&control_type->lock);
+
+		return ERR_PTR(result);
+	}
 
 	control_type->nr_zones++;
 	mutex_unlock(&control_type->lock);

include/acpi/cppc_acpi.h

@@ -108,12 +108,14 @@ struct cppc_perf_caps {
 	u32 lowest_nonlinear_perf;
 	u32 lowest_freq;
 	u32 nominal_freq;
+	u32 energy_perf;
 };
 
 struct cppc_perf_ctrls {
 	u32 max_perf;
 	u32 min_perf;
 	u32 desired_perf;
+	u32 energy_perf;
 };
 
 struct cppc_perf_fb_ctrs {
@@ -149,6 +151,8 @@ extern bool cpc_ffh_supported(void);
 extern bool cpc_supported_by_cpu(void);
 extern int cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val);
 extern int cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val);
+extern int cppc_get_epp_perf(int cpunum, u64 *epp_perf);
+extern int cppc_set_epp_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls, bool enable);
 #else /* !CONFIG_ACPI_CPPC_LIB */
 static inline int cppc_get_desired_perf(int cpunum, u64 *desired_perf)
 {
@@ -202,6 +206,14 @@ static inline int cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val)
 {
 	return -ENOTSUPP;
 }
+static inline int cppc_set_epp_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls, bool enable)
+{
+	return -ENOTSUPP;
+}
+static inline int cppc_get_epp_perf(int cpunum, u64 *epp_perf)
+{
+	return -ENOTSUPP;
+}
 #endif /* !CONFIG_ACPI_CPPC_LIB */
 
 #endif /* _CPPC_ACPI_H*/

include/linux/amd-pstate.h

@@ -12,6 +12,11 @@
 
 #include <linux/pm_qos.h>
 
+#define AMD_CPPC_EPP_PERFORMANCE		0x00
+#define AMD_CPPC_EPP_BALANCE_PERFORMANCE	0x80
+#define AMD_CPPC_EPP_BALANCE_POWERSAVE		0xBF
+#define AMD_CPPC_EPP_POWERSAVE			0xFF
+
 /*********************************************************************
  *                        AMD P-state INTERFACE                       *
  *********************************************************************/
@@ -47,6 +52,10 @@ struct amd_aperf_mperf {
  * @prev: Last Aperf/Mperf/tsc count value read from register
  * @freq: current cpu frequency value
  * @boost_supported: check whether the Processor or SBIOS supports boost mode
+ * @epp_policy: Last saved policy used to set energy-performance preference
+ * @epp_cached: Cached CPPC energy-performance preference value
+ * @policy: Cpufreq policy value
+ * @cppc_cap1_cached Cached MSR_AMD_CPPC_CAP1 register value
  *
  * The amd_cpudata is key private data for each CPU thread in AMD P-State, and
  * represents all the attributes and goals that AMD P-State requests at runtime.
@@ -72,6 +81,29 @@ struct amd_cpudata {
 
 	u64	freq;
 	bool	boost_supported;
+
+	/* EPP feature related attributes*/
+	s16	epp_policy;
+	s16	epp_cached;
+	u32	policy;
+	u64	cppc_cap1_cached;
+	bool	suspended;
 };
 
+/*
+ * enum amd_pstate_mode - driver working mode of amd pstate
+ */
+enum amd_pstate_mode {
+	AMD_PSTATE_DISABLE = 0,
+	AMD_PSTATE_PASSIVE,
+	AMD_PSTATE_ACTIVE,
+	AMD_PSTATE_MAX,
+};
+
+static const char * const amd_pstate_mode_string[] = {
+	[AMD_PSTATE_DISABLE]     = "disable",
+	[AMD_PSTATE_PASSIVE]     = "passive",
+	[AMD_PSTATE_ACTIVE]      = "active",
+	NULL,
+};
 #endif /* _LINUX_AMD_PSTATE_H */

include/linux/cpufreq.h

@@ -448,7 +448,7 @@ struct cpufreq_driver {
 #define CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING	BIT(6)
 
 int cpufreq_register_driver(struct cpufreq_driver *driver_data);
-int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
+void cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
 
 bool cpufreq_driver_test_flags(u16 flags);
 const char *cpufreq_get_current_driver(void);

include/linux/pm.h

@@ -379,9 +379,13 @@ const struct dev_pm_ops name = { \
 	const struct dev_pm_ops name;					\
 	__EXPORT_SYMBOL(name, sec, ns);					\
 	const struct dev_pm_ops name
+#define EXPORT_PM_FN_GPL(name)		EXPORT_SYMBOL_GPL(name)
+#define EXPORT_PM_FN_NS_GPL(name, ns)	EXPORT_SYMBOL_NS_GPL(name, ns)
 #else
 #define _EXPORT_DEV_PM_OPS(name, sec, ns)				\
 	static __maybe_unused const struct dev_pm_ops __static_##name
+#define EXPORT_PM_FN_GPL(name)
+#define EXPORT_PM_FN_NS_GPL(name, ns)
 #endif
 
 #define EXPORT_DEV_PM_OPS(name) _EXPORT_DEV_PM_OPS(name, "", "")

kernel/power/Kconfig

@@ -118,7 +118,6 @@ config PM_SLEEP
 	def_bool y
 	depends on SUSPEND || HIBERNATE_CALLBACKS
 	select PM
-	select SRCU
 
 config PM_SLEEP_SMP
 	def_bool y

kernel/power/energy_model.c

@@ -87,10 +87,7 @@ static void em_debug_create_pd(struct device *dev)
 
 static void em_debug_remove_pd(struct device *dev)
 {
-	struct dentry *debug_dir;
-
-	debug_dir = debugfs_lookup(dev_name(dev), rootdir);
-	debugfs_remove_recursive(debug_dir);
+	debugfs_lookup_and_remove(dev_name(dev), rootdir);
 }
 
 static int __init em_debug_init(void)

kernel/power/swap.c

@@ -581,7 +581,7 @@ static int save_image(struct swap_map_handle *handle,
 	return ret;
 }
 
-/**
+/*
  * Structure used for CRC32.
  */
 struct crc_data {
@@ -596,7 +596,7 @@ struct crc_data {
 	unsigned char *unc[LZO_THREADS];          /* uncompressed data */
 };
 
-/**
+/*
  * CRC32 update function that runs in its own thread.
  */
 static int crc32_threadfn(void *data)
@@ -623,7 +623,7 @@ static int crc32_threadfn(void *data)
 	}
 	return 0;
 }
-/**
+/*
  * Structure used for LZO data compression.
  */
 struct cmp_data {
@@ -640,7 +640,7 @@ struct cmp_data {
 	unsigned char wrk[LZO1X_1_MEM_COMPRESS];  /* compression workspace */
 };
 
-/**
+/*
  * Compression function that runs in its own thread.
  */
 static int lzo_compress_threadfn(void *data)
@@ -948,9 +948,9 @@ int swsusp_write(unsigned int flags)
 	return error;
 }
 
-/**
+/*
  *	The following functions allow us to read data using a swap map
- *	in a file-alike way
+ *	in a file-like way.
  */
 
 static void release_swap_reader(struct swap_map_handle *handle)
@@ -1107,7 +1107,7 @@ static int load_image(struct swap_map_handle *handle,
 	return ret;
 }
 
-/**
+/*
  * Structure used for LZO data decompression.
  */
 struct dec_data {
@@ -1123,7 +1123,7 @@ struct dec_data {
 	unsigned char cmp[LZO_CMP_SIZE];          /* compressed buffer */
 };
 
-/**
+/*
  * Decompression function that runs in its own thread.
  */
 static int lzo_decompress_threadfn(void *data)

tools/power/pm-graph/sleepgraph.py

@@ -120,9 +120,9 @@ class SystemValues:
 	cgexp = False
 	testdir = ''
 	outdir = ''
-	tpath = '/sys/kernel/debug/tracing/'
+	tpath = '/sys/kernel/tracing/'
 	fpdtpath = '/sys/firmware/acpi/tables/FPDT'
-	epath = '/sys/kernel/debug/tracing/events/power/'
+	epath = '/sys/kernel/tracing/events/power/'
 	pmdpath = '/sys/power/pm_debug_messages'
 	s0ixpath = '/sys/module/intel_pmc_core/parameters/warn_on_s0ix_failures'
 	s0ixres = '/sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us'

tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py

@@ -248,7 +248,7 @@ def signal_handler(signal, frame):
         ipt.free_trace_buffer()
         sys.exit(0)
 
-trace_file = "/sys/kernel/debug/tracing/events/amd_cpu/enable"
+trace_file = "/sys/kernel/tracing/events/amd_cpu/enable"
 signal.signal(signal.SIGINT, signal_handler)
 
 interval = ""
@@ -319,7 +319,7 @@ print(cur_version)
 cleanup_data_files()
 
 if interval:
-    file_name = "/sys/kernel/debug/tracing/trace"
+    file_name = "/sys/kernel/tracing/trace"
     ipt.clear_trace_file()
     ipt.set_trace_buffer_size(memory)
     ipt.enable_trace(trace_file)

tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py

@@ -373,7 +373,7 @@ def clear_trace_file():
     """ Clear trace file """
 
     try:
-        f_handle = open('/sys/kernel/debug/tracing/trace', 'w')
+        f_handle = open('/sys/kernel/tracing/trace', 'w')
         f_handle.close()
     except:
         print('IO error clearing trace file ')
@@ -401,7 +401,7 @@ def set_trace_buffer_size(memory):
     """ Set trace buffer size """
 
     try:
-       with open('/sys/kernel/debug/tracing/buffer_size_kb', 'w') as fp:
+       with open('/sys/kernel/tracing/buffer_size_kb', 'w') as fp:
           fp.write(memory)
     except:
        print('IO error setting trace buffer size ')
@@ -411,7 +411,7 @@ def free_trace_buffer():
     """ Free the trace buffer memory """
 
     try:
-       open('/sys/kernel/debug/tracing/buffer_size_kb'
+       open('/sys/kernel/tracing/buffer_size_kb'
                  , 'w').write("1")
     except:
         print('IO error freeing trace buffer ')
@@ -495,7 +495,7 @@ def signal_handler(signal, frame):
         sys.exit(0)
 
 if __name__ == "__main__":
-    trace_file = "/sys/kernel/debug/tracing/events/power/pstate_sample/enable"
+    trace_file = "/sys/kernel/tracing/events/power/pstate_sample/enable"
     signal.signal(signal.SIGINT, signal_handler)
 
     interval = ""
@@ -569,7 +569,7 @@ if __name__ == "__main__":
     cleanup_data_files()
 
     if interval:
-        filename = "/sys/kernel/debug/tracing/trace"
+        filename = "/sys/kernel/tracing/trace"
         clear_trace_file()
         set_trace_buffer_size(memory)
         enable_trace(trace_file)