Commit 305b93f1 authored by Brian Norris's avatar Brian Norris Committed by Artem Bityutskiy

mtd: do not assume oobsize is power of 2

Previous generations of MTDs all used OOB sizes that were powers of 2,
(e.g., 64, 128). However, newer generations of flash, especially NAND,
use irregular OOB sizes that are not powers of 2 (e.g., 218, 224, 448).
This means we cannot use masks like "mtd->oobsize - 1" to assume that we
will get a proper bitmask for OOB operations.

These masks are really only intended to hide the "page" portion of the
offset, leaving any OOB offset intact, so a masking with the writesize
(which *is* always a power of 2) is valid and makes more sense.

This has been tested for read/write of NAND devices (nanddump/nandwrite)
using nandsim and actual NAND flash.
Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
Signed-off-by: default avatarArtem Bityutskiy <artem.bityutskiy@intel.com>
parent c97926dd
......@@ -410,7 +410,7 @@ static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd,
return ret;
ops.ooblen = length;
ops.ooboffs = start & (mtd->oobsize - 1);
ops.ooboffs = start & (mtd->writesize - 1);
ops.datbuf = NULL;
ops.mode = MTD_OOB_PLACE;
......@@ -421,7 +421,7 @@ static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd,
if (IS_ERR(ops.oobbuf))
return PTR_ERR(ops.oobbuf);
start &= ~((uint64_t)mtd->oobsize - 1);
start &= ~((uint64_t)mtd->writesize - 1);
ret = mtd->write_oob(mtd, start, &ops);
if (ops.oobretlen > 0xFFFFFFFFU)
......@@ -452,7 +452,7 @@ static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
return ret;
ops.ooblen = length;
ops.ooboffs = start & (mtd->oobsize - 1);
ops.ooboffs = start & (mtd->writesize - 1);
ops.datbuf = NULL;
ops.mode = MTD_OOB_PLACE;
......@@ -463,7 +463,7 @@ static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
if (!ops.oobbuf)
return -ENOMEM;
start &= ~((uint64_t)mtd->oobsize - 1);
start &= ~((uint64_t)mtd->writesize - 1);
ret = mtd->read_oob(mtd, start, &ops);
if (put_user(ops.oobretlen, retp))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment