Merge tag 'ktest-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull Ktest fixes and clean ups from Steven Rostedt:

 - Make the default option oldconfig instead of randconfig (one too many
   times I lost my config because I left the build type out)

 - Add timeout to ssh sync to sync before reboot (prevents test hangs)

 - A couple of spelling fix patches

* tag 'ktest-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix typos in ktest.pl
  ktest: Add timeout for ssh sync testing
  ktest: Make default build option oldconfig not randconfig
  ktest: Fix some typos in sample.conf

tools/testing/ktest/ktest.pl

@@ -30,7 +30,7 @@ my %default = (
     "EMAIL_WHEN_STARTED"	=> 0,
     "NUM_TESTS"			=> 1,
     "TEST_TYPE"			=> "build",
-    "BUILD_TYPE"		=> "randconfig",
+    "BUILD_TYPE"		=> "oldconfig",
     "MAKE_CMD"			=> "make",
     "CLOSE_CONSOLE_SIGNAL"	=> "INT",
     "TIMEOUT"			=> 120,
@@ -1030,7 +1030,7 @@ sub __read_config {
 	    }
 
 	    if (!$skip && $rest !~ /^\s*$/) {
-		die "$name: $.: Gargbage found after $type\n$_";
+		die "$name: $.: Garbage found after $type\n$_";
 	    }
 
 	    if ($skip && $type eq "TEST_START") {
@@ -1063,7 +1063,7 @@ sub __read_config {
 	    }
 
 	    if ($rest !~ /^\s*$/) {
-		die "$name: $.: Gargbage found after DEFAULTS\n$_";
+		die "$name: $.: Garbage found after DEFAULTS\n$_";
 	    }
 
 	} elsif (/^\s*INCLUDE\s+(\S+)/) {
@@ -1154,7 +1154,7 @@ sub __read_config {
 	    # on of these sections that have SKIP defined.
 	    # The save variable can be
 	    # defined multiple times and the new one simply overrides
-	    # the prevous one.
+	    # the previous one.
 	    set_variable($lvalue, $rvalue);
 
 	} else {
@@ -1234,7 +1234,7 @@ sub read_config {
 	foreach my $option (keys %not_used) {
 	    print "$option\n";
 	}
-	print "Set IGRNORE_UNUSED = 1 to have ktest ignore unused variables\n";
+	print "Set IGNORE_UNUSED = 1 to have ktest ignore unused variables\n";
 	if (!read_yn "Do you want to continue?") {
 	    exit -1;
 	}
@@ -1345,7 +1345,7 @@ sub eval_option {
 	# Check for recursive evaluations.
 	# 100 deep should be more than enough.
 	if ($r++ > 100) {
-	    die "Over 100 evaluations accurred with $option\n" .
+	    die "Over 100 evaluations occurred with $option\n" .
 		"Check for recursive variables\n";
 	}
 	$prev = $option;
@@ -1383,7 +1383,7 @@ sub reboot {
 
     } else {
 	# Make sure everything has been written to disk
-	run_ssh("sync");
+	run_ssh("sync", 10);
 
 	if (defined($time)) {
 	    start_monitor;
@@ -1461,7 +1461,7 @@ sub get_test_name() {
 
 sub dodie {
 
-    # avoid recusion
+    # avoid recursion
     return if ($in_die);
     $in_die = 1;
 

tools/testing/ktest/sample.conf

@@ -10,7 +10,7 @@
 #
 
 # Options set in the beginning of the file are considered to be
-# default options. These options can be overriden by test specific
+# default options. These options can be overridden by test specific
 # options, with the following exceptions:
 #
 #  LOG_FILE
@@ -204,7 +204,7 @@
 #
 # This config file can also contain "config variables".
 # These are assigned with ":=" instead of the ktest option
-# assigment "=".
+# assignment "=".
 #
 # The difference between ktest options and config variables
 # is that config variables can be used multiple times,
@@ -263,7 +263,7 @@
 #### Using options in other options ####
 #
 # Options that are defined in the config file may also be used
-# by other options. All options are evaulated at time of
+# by other options. All options are evaluated at time of
 # use (except that config variables are evaluated at config
 # processing time).
 #
@@ -505,7 +505,7 @@
 #TEST = ssh user@machine /root/run_test
 
 # The build type is any make config type or special command
-#  (default randconfig)
+#  (default oldconfig)
 #   nobuild - skip the clean and build step
 #   useconfig:/path/to/config - use the given config and run
 #              oldconfig on it.
@@ -707,7 +707,7 @@
 
 # Line to define a successful boot up in console output.
 # This is what the line contains, not the entire line. If you need
-# the entire line to match, then use regural expression syntax like:
+# the entire line to match, then use regular expression syntax like:
 #  (do not add any quotes around it)
 #
 #  SUCCESS_LINE = ^MyBox Login:$
@@ -839,7 +839,7 @@
 # (ignored if POWEROFF_ON_SUCCESS is set)
 #REBOOT_ON_SUCCESS = 1
 
-# In case there are isses with rebooting, you can specify this
+# In case there are issues with rebooting, you can specify this
 # to always powercycle after this amount of time after calling
 # reboot.
 # Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just
@@ -848,7 +848,7 @@
 # (default undefined)
 #POWERCYCLE_AFTER_REBOOT = 5
 
-# In case there's isses with halting, you can specify this
+# In case there's issues with halting, you can specify this
 # to always poweroff after this amount of time after calling
 # halt.
 # Note, POWEROFF_AFTER_HALT = 0 does NOT disable it. It just
@@ -972,7 +972,7 @@
 #
 #  PATCHCHECK_START is required and is the first patch to
 #   test (the SHA1 of the commit). You may also specify anything
-#   that git checkout allows (branch name, tage, HEAD~3).
+#   that git checkout allows (branch name, tag, HEAD~3).
 #
 #  PATCHCHECK_END is the last patch to check (default HEAD)
 #
@@ -994,7 +994,7 @@
 #     IGNORE_WARNINGS is set for the given commit's sha1
 #
 #   IGNORE_WARNINGS can be used to disable the failure of patchcheck
-#     on a particuler commit (SHA1). You can add more than one commit
+#     on a particular commit (SHA1). You can add more than one commit
 #     by adding a list of SHA1s that are space delimited.
 #
 #   If BUILD_NOCLEAN is set, then make mrproper will not be run on
@@ -1093,7 +1093,7 @@
 #   whatever reason. (Can't reboot, want to inspect each iteration)
 #   Doing a BISECT_MANUAL will have the test wait for you to
 #   tell it if the test passed or failed after each iteration.
-#   This is basicall the same as running git bisect yourself
+#   This is basically the same as running git bisect yourself
 #   but ktest will rebuild and install the kernel for you.
 #
 # BISECT_CHECK = 1 (optional, default 0)
@@ -1239,7 +1239,7 @@
 #
 # CONFIG_BISECT_EXEC (optional)
 #  The config bisect is a separate program that comes with ktest.pl.
-#  By befault, it will look for:
+#  By default, it will look for:
 #    `pwd`/config-bisect.pl # the location ktest.pl was executed from.
 #  If it does not find it there, it will look for:
 #    `dirname <ktest.pl>`/config-bisect.pl # The directory that holds ktest.pl