drm/msm/dsi: Don't get DSI index from DT

The DSI host and PHY driver currently expects the DT bindings to provide
custom properties "qcom,dsi-host-index" and "qcom,dsi-phy-index" so that
the driver can identify which DSI instance it is.

The binding isn't acceptable, but the driver still needs to figure out
what its instance id. This is now done by storing the mmio starting
addresses for each DSI instance in every SoC version in the driver. The
driver then identifies the index number by trying to match the stored
address with comparing the resource start address we get from DT.

We don't have compatible strings for DSI PHY on each SoC, but only the
DSI PHY type. We only support one SoC version for each PHY type, so we
get away doing the same thing above for the PHY driver. We can revisit
this when we support two SoCs with the same DSI PHY.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drivers/gpu/drm/msm/dsi/dsi_cfg.c

@@ -29,6 +29,8 @@ static const struct msm_dsi_config apq8064_dsi_cfg = {
 	},
 	.bus_clk_names = dsi_v2_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_v2_bus_clk_names),
+	.io_start = { 0x4700000, 0x5800000 },
+	.num_dsi = 2,
 };
 
 static const char * const dsi_6g_bus_clk_names[] = {
@@ -48,6 +50,8 @@ static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = {
 	},
 	.bus_clk_names = dsi_6g_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
+	.io_start = { 0xfd922800, 0xfd922b00 },
+	.num_dsi = 2,
 };
 
 static const char * const dsi_8916_bus_clk_names[] = {
@@ -66,6 +70,8 @@ static const struct msm_dsi_config msm8916_dsi_cfg = {
 	},
 	.bus_clk_names = dsi_8916_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_8916_bus_clk_names),
+	.io_start = { 0x1a98000 },
+	.num_dsi = 1,
 };
 
 static const struct msm_dsi_config msm8994_dsi_cfg = {
@@ -84,6 +90,8 @@ static const struct msm_dsi_config msm8994_dsi_cfg = {
 	},
 	.bus_clk_names = dsi_6g_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
+	.io_start = { 0xfd998000, 0xfd9a0000 },
+	.num_dsi = 2,
 };
 
 static const struct msm_dsi_cfg_handler dsi_cfg_handlers[] = {

drivers/gpu/drm/msm/dsi/dsi_cfg.h

@@ -34,6 +34,8 @@ struct msm_dsi_config {
 	struct dsi_reg_config reg_cfg;
 	const char * const *bus_clk_names;
 	const int num_bus_clks;
+	const resource_size_t io_start[DSI_MAX];
+	const int num_dsi;
 };
 
 struct msm_dsi_cfg_handler {

drivers/gpu/drm/msm/dsi/dsi_host.c

@@ -1605,13 +1605,6 @@ static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
 	struct device_node *endpoint, *device_node;
 	int ret;
 
-	ret = of_property_read_u32(np, "qcom,dsi-host-index", &msm_host->id);
-	if (ret) {
-		dev_err(dev, "%s: host index not specified, ret=%d\n",
-			__func__, ret);
-		return ret;
-	}
-
 	/*
 	 * Get the endpoint of the output port of the DSI host. In our case,
 	 * this is mapped to port number with reg = 1. Don't return an error if
@@ -1659,6 +1652,25 @@ static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
 	return ret;
 }
 
+static int dsi_host_get_id(struct msm_dsi_host *msm_host)
+{
+	struct platform_device *pdev = msm_host->pdev;
+	const struct msm_dsi_config *cfg = msm_host->cfg_hnd->cfg;
+	struct resource *res;
+	int i;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dsi_ctrl");
+	if (!res)
+		return -EINVAL;
+
+	for (i = 0; i < cfg->num_dsi; i++) {
+		if (cfg->io_start[i] == res->start)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
 int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 {
 	struct msm_dsi_host *msm_host = NULL;
@@ -1695,6 +1707,13 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 		goto fail;
 	}
 
+	msm_host->id = dsi_host_get_id(msm_host);
+	if (msm_host->id < 0) {
+		ret = msm_host->id;
+		pr_err("%s: unable to identify DSI host index\n", __func__);
+		goto fail;
+	}
+
 	/* fixup base address by io offset */
 	msm_host->ctrl_base += msm_host->cfg_hnd->cfg->io_offset;
 

drivers/gpu/drm/msm/dsi/phy/dsi_phy.c

@@ -271,6 +271,30 @@ static const struct of_device_id dsi_phy_dt_match[] = {
 	{}
 };
 
+/*
+ * Currently, we only support one SoC for each PHY type. When we have multiple
+ * SoCs for the same PHY, we can try to make the index searching a bit more
+ * clever.
+ */
+static int dsi_phy_get_id(struct msm_dsi_phy *phy)
+{
+	struct platform_device *pdev = phy->pdev;
+	const struct msm_dsi_phy_cfg *cfg = phy->cfg;
+	struct resource *res;
+	int i;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dsi_phy");
+	if (!res)
+		return -EINVAL;
+
+	for (i = 0; i < cfg->num_dsi_phy; i++) {
+		if (cfg->io_start[i] == res->start)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
 static int dsi_phy_driver_probe(struct platform_device *pdev)
 {
 	struct msm_dsi_phy *phy;
@@ -289,10 +313,10 @@ static int dsi_phy_driver_probe(struct platform_device *pdev)
 	phy->cfg = match->data;
 	phy->pdev = pdev;
 
-	ret = of_property_read_u32(dev->of_node,
-				"qcom,dsi-phy-index", &phy->id);
-	if (ret) {
-		dev_err(dev, "%s: PHY index not specified, %d\n",
+	phy->id = dsi_phy_get_id(phy);
+	if (phy->id < 0) {
+		ret = phy->id;
+		dev_err(dev, "%s: couldn't identify PHY index, %d\n",
 			__func__, ret);
 		goto fail;
 	}

drivers/gpu/drm/msm/dsi/phy/dsi_phy.h

@@ -38,6 +38,8 @@ struct msm_dsi_phy_cfg {
 	 * Fill default H/W values in illegal cells, eg. cell {0, 1}.
 	 */
 	bool src_pll_truthtable[DSI_MAX][DSI_MAX];
+	const resource_size_t io_start[DSI_MAX];
+	const int num_dsi_phy;
 };
 
 extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs;

drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c

@@ -145,6 +145,8 @@ const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs = {
 	.ops = {
 		.enable = dsi_20nm_phy_enable,
 		.disable = dsi_20nm_phy_disable,
-	}
+	},
+	.io_start = { 0xfd998300, 0xfd9a0300 },
+	.num_dsi_phy = 2,
 };
 

drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c

@@ -145,6 +145,8 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = {
 		.enable = dsi_28nm_phy_enable,
 		.disable = dsi_28nm_phy_disable,
 	},
+	.io_start = { 0xfd922b00, 0xfd923100 },
+	.num_dsi_phy = 2,
 };
 
 const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
@@ -160,5 +162,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
 		.enable = dsi_28nm_phy_enable,
 		.disable = dsi_28nm_phy_disable,
 	},
+	.io_start = { 0x1a98500 },
+	.num_dsi_phy = 1,
 };
 

drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c

@@ -192,4 +192,6 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = {
 		.enable = dsi_28nm_phy_enable,
 		.disable = dsi_28nm_phy_disable,
 	},
+	.io_start = { 0x4700300, 0x5800300 },
+	.num_dsi_phy = 2,
 };