ARM: dts: imx: use generic node name for fixed regulator

The device tree specification recommends that generic name should be
used for nodes.  So instead of naming those fixed regulator nodes
arbitrarily, let's use the generic name 'regulator@num' for those nodes.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx23-evk.dts

@@ -127,17 +127,21 @@ usb0: usb@80080000 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_vddio_sd0: vddio-sd0 {
+		reg_vddio_sd0: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "vddio-sd0";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio1 29 0>;
 		};
 
-		reg_lcd_3v3: lcd-3v3 {
+		reg_lcd_3v3: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "lcd-3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/imx23-olinuxino.dts

@@ -100,9 +100,12 @@ usb0: usb@80080000 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb0_vbus: usb0_vbus {
+		reg_usb0_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;

arch/arm/boot/dts/imx23-stmp378x_devb.dts

@@ -66,9 +66,12 @@ duart: serial@80070000 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_vddio_sd0: vddio-sd0 {
+		reg_vddio_sd0: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "vddio-sd0";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts

@@ -37,9 +37,12 @@ timing0: 640x480 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3v3: 3v3 {
+		reg_3v3: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3V3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/imx28-apf28dev.dts

@@ -150,9 +150,12 @@ mac1: ethernet@800f4000 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb0_vbus: usb0_vbus {
+		reg_usb0_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;

arch/arm/boot/dts/imx28-apx4devkit.dts

@@ -193,9 +193,12 @@ mac0: ethernet@800f0000 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/imx28-cfa10037.dts

@@ -72,9 +72,12 @@ mac0: ethernet@800f0000 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb_pins_cfa10037>;
 			regulator-name = "usb1_vbus";

arch/arm/boot/dts/imx28-cfa10049.dts

@@ -282,9 +282,12 @@ usb1: usb@80090000 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb_pins_cfa10049>;
 			regulator-name = "usb1_vbus";

arch/arm/boot/dts/imx28-cfa10057.dts

@@ -142,9 +142,12 @@ usb1: usb@80090000 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb_pins_cfa10057>;
 			regulator-name = "usb1_vbus";

arch/arm/boot/dts/imx28-cfa10058.dts

@@ -109,11 +109,14 @@ usb1: usb@80090000 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@0 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb_pins_cfa10058>;
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;

arch/arm/boot/dts/imx28-evk.dts

@@ -278,33 +278,39 @@ mac1: ethernet@800f4000 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		reg_vddio_sd0: vddio-sd0 {
+		reg_vddio_sd0: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "vddio-sd0";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio3 28 0>;
 		};
 
-		reg_fec_3v3: fec-3v3 {
+		reg_fec_3v3: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			regulator-name = "fec-3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio2 15 0>;
 		};
 
-		reg_usb0_vbus: usb0_vbus {
+		reg_usb0_vbus: regulator@3 {
 			compatible = "regulator-fixed";
+			reg = <3>;
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -312,8 +318,9 @@ reg_usb0_vbus: usb0_vbus {
 			enable-active-high;
 		};
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@4 {
 			compatible = "regulator-fixed";
+			reg = <4>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -321,8 +328,9 @@ reg_usb1_vbus: usb1_vbus {
 			enable-active-high;
 		};
 
-		reg_lcd_3v3: lcd-3v3 {
+		reg_lcd_3v3: regulator@5 {
 			compatible = "regulator-fixed";
+			reg = <5>;
 			regulator-name = "lcd-3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -330,8 +338,9 @@ reg_lcd_3v3: lcd-3v3 {
 			enable-active-high;
 		};
 
-		reg_can_3v3: can-3v3 {
+		reg_can_3v3: regulator@6 {
 			compatible = "regulator-fixed";
+			reg = <6>;
 			regulator-name = "can-3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/imx28-m28cu3.dts

@@ -229,33 +229,39 @@ user2 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		reg_vddio_sd0: vddio-sd0 {
+		reg_vddio_sd0: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "vddio-sd0";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio3 29 0>;
 		};
 
-		reg_vddio_sd1: vddio-sd1 {
+		reg_vddio_sd1: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			regulator-name = "vddio-sd1";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio2 19 0>;
 		};
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@3 {
 			compatible = "regulator-fixed";
+			reg = <3>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;

arch/arm/boot/dts/imx28-m28evk.dts

@@ -285,33 +285,39 @@ backlight {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		reg_vddio_sd0: vddio-sd0 {
+		reg_vddio_sd0: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "vddio-sd0";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio3 28 0>;
 		};
 
-		reg_usb0_vbus: usb0_vbus {
+		reg_usb0_vbus: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio3 12 0>;
 		};
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@3 {
 			compatible = "regulator-fixed";
+			reg = <3>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;

arch/arm/boot/dts/imx28-sps1.dts

@@ -127,9 +127,12 @@ mac1: ethernet@800f4000 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb0_vbus: usb0_vbus {
+		reg_usb0_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;

arch/arm/boot/dts/imx28-tx28.dts

@@ -43,9 +43,12 @@ onewire {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb0_vbus: usb0_vbus {
+		reg_usb0_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -53,8 +56,9 @@ reg_usb0_vbus: usb0_vbus {
 			enable-active-high;
 		};
 
-		reg_usb1_vbus: usb1_vbus {
+		reg_usb1_vbus: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -62,24 +66,27 @@ reg_usb1_vbus: usb1_vbus {
 			enable-active-high;
 		};
 
-		reg_2p5v: 2p5v {
+		reg_2p5v: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			regulator-name = "2P5V";
 			regulator-min-microvolt = <2500000>;
 			regulator-max-microvolt = <2500000>;
 			regulator-always-on;
 		};
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@3 {
 			compatible = "regulator-fixed";
+			reg = <3>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		reg_can_xcvr: can-xcvr {
+		reg_can_xcvr: regulator@4 {
 			compatible = "regulator-fixed";
+			reg = <4>;
 			regulator-name = "CAN XCVR";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -89,8 +96,9 @@ reg_can_xcvr: can-xcvr {
 			pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
 		};
 
-		reg_lcd: lcd-power {
+		reg_lcd: regulator@5 {
 			compatible = "regulator-fixed";
+			reg = <5>;
 			regulator-name = "LCD POWER";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -98,8 +106,9 @@ reg_lcd: lcd-power {
 			enable-active-high;
 		};
 
-		reg_lcd_reset: lcd-reset {
+		reg_lcd_reset: regulator@6 {
 			compatible = "regulator-fixed";
+			reg = <6>;
 			regulator-name = "LCD RESET";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/imx53-ard.dts

@@ -49,9 +49,12 @@ lan9220@f4000000 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/imx53-m53evk.dts

@@ -73,9 +73,12 @@ user2 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p2v: 3p2v {
+		reg_3p2v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P2V";
 			regulator-min-microvolt = <3200000>;
 			regulator-max-microvolt = <3200000>;

arch/arm/boot/dts/imx53-mba53.dts

@@ -37,17 +37,21 @@ disp1: display@disp1 {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_backlight: fixed@0 {
+		reg_backlight: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "lcd-supply";
 			gpio = <&gpio2 5 0>;
 			startup-delay-us = <5000>;
 			enable-active-low;
 		};
 
-		reg_3p2v: 3p2v {
+		reg_3p2v: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "3P2V";
 			regulator-min-microvolt = <3200000>;
 			regulator-max-microvolt = <3200000>;

arch/arm/boot/dts/imx53-qsb.dts

@@ -86,17 +86,21 @@ user {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p2v: 3p2v {
+		reg_3p2v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P2V";
 			regulator-min-microvolt = <3200000>;
 			regulator-max-microvolt = <3200000>;
 			regulator-always-on;
 		};
 
-		reg_usb_vbus: usb_vbus {
+		reg_usb_vbus: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "usb_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;

arch/arm/boot/dts/imx53-tqma53.dtsi

@@ -22,9 +22,12 @@ memory {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/imx53-tx53.dtsi

@@ -21,9 +21,12 @@ memory {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;