net: bcmgenet: remove eee_enabled/eee_active in bcmgenet_get_eee()

bcmgenet_get_eee() sets edata->eee_active and edata->eee_enabled from
its own copy, and then calls phy_ethtool_get_eee() which in turn will
call genphy_c45_ethtool_get_eee().

genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.

Therefore, setting these members in bcmgenet_get_eee() is redundant,
and can be removed. This also makes priv->eee.eee_active unnecessary,
so remove this and use a local variable where appropriate.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rWbN7-002cCn-RO@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/broadcom/genet/bcmgenet.c

@@ -1313,7 +1313,6 @@ void bcmgenet_eee_enable_set(struct net_device *dev, bool enable,
 	}
 
 	priv->eee.eee_enabled = enable;
-	priv->eee.eee_active = enable;
 	priv->eee.tx_lpi_enabled = tx_lpi_enabled;
 }
 
@@ -1328,8 +1327,6 @@ static int bcmgenet_get_eee(struct net_device *dev, struct ethtool_keee *e)
 	if (!dev->phydev)
 		return -ENODEV;
 
-	e->eee_enabled = p->eee_enabled;
-	e->eee_active = p->eee_active;
 	e->tx_lpi_enabled = p->tx_lpi_enabled;
 	e->tx_lpi_timer = bcmgenet_umac_readl(priv, UMAC_EEE_LPI_TIMER);
 
@@ -1340,6 +1337,7 @@ static int bcmgenet_set_eee(struct net_device *dev, struct ethtool_keee *e)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct ethtool_keee *p = &priv->eee;
+	bool active;
 
 	if (GENET_IS_V1(priv))
 		return -EOPNOTSUPP;
@@ -1352,9 +1350,9 @@ static int bcmgenet_set_eee(struct net_device *dev, struct ethtool_keee *e)
 	if (!p->eee_enabled) {
 		bcmgenet_eee_enable_set(dev, false, false);
 	} else {
-		p->eee_active = phy_init_eee(dev->phydev, false) >= 0;
+		active = phy_init_eee(dev->phydev, false) >= 0;
 		bcmgenet_umac_writel(priv, e->tx_lpi_timer, UMAC_EEE_LPI_TIMER);
-		bcmgenet_eee_enable_set(dev, p->eee_active, e->tx_lpi_enabled);
+		bcmgenet_eee_enable_set(dev, active, e->tx_lpi_enabled);
 	}
 
 	return phy_ethtool_set_eee(dev->phydev, e);

drivers/net/ethernet/broadcom/genet/bcmmii.c

@@ -30,6 +30,7 @@ static void bcmgenet_mac_config(struct net_device *dev)
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct phy_device *phydev = dev->phydev;
 	u32 reg, cmd_bits = 0;
+	bool active;
 
 	/* speed */
 	if (phydev->speed == SPEED_1000)
@@ -88,9 +89,9 @@ static void bcmgenet_mac_config(struct net_device *dev)
 	}
 	bcmgenet_umac_writel(priv, reg, UMAC_CMD);
 
-	priv->eee.eee_active = phy_init_eee(phydev, 0) >= 0;
+	active = phy_init_eee(phydev, 0) >= 0;
 	bcmgenet_eee_enable_set(dev,
-				priv->eee.eee_enabled && priv->eee.eee_active,
+				priv->eee.eee_enabled && active,
 				priv->eee.tx_lpi_enabled);
 }