serial: 8250_pci: Add support for Pericom PI7C9X795[1248]

commit 89c043a6 upstream.

Pericom PI7C9X795[1248] are Uno/Dual/Quad/Octal UART devices, this
patch enables them, also defines PCI_VENDOR_ID_PERICOM here.
Signed-off-by: Adam Lee <adam.lee@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>

drivers/tty/serial/8250/8250_pci.c

@@ -1796,6 +1796,12 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_SUNIX_1999	0x1999
 
 
+#define PCI_VENDOR_ID_PERICOM			0x12D8
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7951	0x7951
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7952	0x7952
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7954	0x7954
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7958	0x7958
+
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588	0x1588
@@ -2075,27 +2081,12 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	 * Pericom
 	 */
 	{
-		.vendor		= 0x12d8,
-		.device		= 0x7952,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_pericom_setup,
-	},
-	{
-		.vendor		= 0x12d8,
-		.device		= 0x7954,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_pericom_setup,
-	},
-	{
-		.vendor		= 0x12d8,
-		.device		= 0x7958,
+		.vendor         = PCI_VENDOR_ID_PERICOM,
+		.device         = PCI_ANY_ID,
 		.subvendor      = PCI_ANY_ID,
 		.subdevice      = PCI_ANY_ID,
 		.setup          = pci_pericom_setup,
 	},
-
 	/*
 	 * PLX
 	 */
@@ -2757,6 +2748,10 @@ enum pci_board_num_t {
 	pbn_fintek_4,
 	pbn_fintek_8,
 	pbn_fintek_12,
+	pbn_pericom_PI7C9X7951,
+	pbn_pericom_PI7C9X7952,
+	pbn_pericom_PI7C9X7954,
+	pbn_pericom_PI7C9X7958,
 };
 
 /*
@@ -3542,6 +3537,33 @@ static struct pciserial_board pci_boards[] = {
 		.base_baud	= 115200,
 		.first_offset	= 0x40,
 	},
+	/*
+	 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+	 */
+	[pbn_pericom_PI7C9X7951] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 1,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7952] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 2,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7954] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 4,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7958] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 8,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
 };
 
 static const struct pci_device_id blacklist[] = {
@@ -4790,6 +4812,25 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0,
 		0, pbn_exar_XR17V358 },
 
+	/*
+	 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+	 */
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7951 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7952 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7954 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7958 },
 	/*
 	 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
 	 */