[media] dvb-usb: add ATSC support for the Hauppauge WinTV-Aero-M

Adds new driver, mxl111sf, to support the WinTV-Aero-M
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Reviewed-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/dvb-usb/Kconfig

@@ -381,3 +381,11 @@ config DVB_USB_IT913X
 	select DVB_IT913X_FE
 	help
 	  Say Y here to support the it913x device
+
+config DVB_USB_MXL111SF
+	tristate "MxL111SF DTV USB2.0 support"
+	depends on DVB_USB
+	select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
+	select VIDEO_TVEEPROM
+	help
+	  Say Y here to support the MxL111SF USB2.0 DTV receiver.

drivers/media/dvb/dvb-usb/Makefile

@@ -97,6 +97,10 @@ obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o
 dvb-usb-it913x-objs := it913x.o
 obj-$(CONFIG_DVB_USB_IT913X) += dvb-usb-it913x.o
 
+dvb-usb-mxl111sf-objs = mxl111sf.o mxl111sf-phy.o mxl111sf-i2c.o mxl111sf-gpio.o
+obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o
+obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o
+
 ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
 # due to tuner-xc3028
 ccflags-y += -Idrivers/media/common/tuners

drivers/media/dvb/dvb-usb/mxl111sf-gpio.h

+/*
+ *  mxl111sf-gpio.h - driver for the MaxLinear MXL111SF
+ *
+ *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_GPIO_H_
+#define _DVB_USB_MXL111SF_GPIO_H_
+
+#include "mxl111sf.h"
+
+int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val);
+int mxl111sf_init_port_expander(struct mxl111sf_state *state);
+
+#define MXL111SF_GPIO_MOD_DVBT	0
+#define MXL111SF_GPIO_MOD_MH	1
+#define MXL111SF_GPIO_MOD_ATSC	2
+int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode);
+
+enum mxl111sf_mux_config {
+	PIN_MUX_DEFAULT = 0,
+	PIN_MUX_TS_OUT_PARALLEL,
+	PIN_MUX_TS_OUT_SERIAL,
+	PIN_MUX_GPIO_MODE,
+	PIN_MUX_TS_SERIAL_IN_MODE_0,
+	PIN_MUX_TS_SERIAL_IN_MODE_1,
+	PIN_MUX_TS_SPI_IN_MODE_0,
+	PIN_MUX_TS_SPI_IN_MODE_1,
+	PIN_MUX_TS_PARALLEL_IN,
+	PIN_MUX_BT656_I2S_MODE,
+};
+
+int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state,
+				  enum mxl111sf_mux_config pin_mux_config);
+
+#endif /* _DVB_USB_MXL111SF_GPIO_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */

drivers/media/dvb/dvb-usb/mxl111sf-i2c.h

+/*
+ *  mxl111sf-i2c.h - driver for the MaxLinear MXL111SF
+ *
+ *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_I2C_H_
+#define _DVB_USB_MXL111SF_I2C_H_
+
+#include <linux/i2c.h>
+
+int mxl111sf_i2c_xfer(struct i2c_adapter *adap,
+		      struct i2c_msg msg[], int num);
+
+#endif /* _DVB_USB_MXL111SF_I2C_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */

drivers/media/dvb/dvb-usb/mxl111sf-phy.c

+/*
+ *  mxl111sf-phy.c - driver for the MaxLinear MXL111SF
+ *
+ *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-phy.h"
+#include "mxl111sf-reg.h"
+
+int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
+{
+	struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
+		{0x07, 0xff, 0x0c},
+		{0x58, 0xff, 0x9d},
+		{0x09, 0xff, 0x00},
+		{0x06, 0xff, 0x06},
+		{0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
+		{0x8d, 0x01, 0x01}, /* NEGATE_Q */
+		{0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
+		{0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
+		{0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
+		{0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
+		{0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
+		{0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
+		{0x88, 0xff, 0xf0}, /* INF_THD = 240 */
+		{0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
+		{0x00, 0xff, 0x01}, /* Change to page 1 */
+		{0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
+		{0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
+		{0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
+		{0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
+		{0x00, 0xff, 0x00}, /* Change to page 0 */
+		{0,    0,    0}
+	};
+
+	mxl_debug("()");
+
+	return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
+}
+
+int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
+{
+	int ret;
+	mxl_debug("()");
+
+	ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
+	if (mxl_fail(ret))
+		goto fail;
+	ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
+	mxl_fail(ret);
+fail:
+	return ret;
+}
+
+int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
+{
+	int ret;
+
+	mxl_debug("(%s)", MXL_SOC_MODE == mode ?
+		"MXL_SOC_MODE" : "MXL_TUNER_MODE");
+
+	/* set device mode */
+	ret = mxl111sf_write_reg(state, 0x03,
+				 MXL_SOC_MODE == mode ? 0x01 : 0x00);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_write_reg_mask(state,
+				      0x7d, 0x40, MXL_SOC_MODE == mode ?
+				      0x00 : /* enable impulse noise filter,
+						INF_BYP = 0 */
+				      0x40); /* disable impulse noise filter,
+						INF_BYP = 1 */
+	if (mxl_fail(ret))
+		goto fail;
+
+	state->device_mode = mode;
+fail:
+	return ret;
+}
+
+/* power up tuner */
+int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
+{
+	mxl_debug("(%d)", onoff);
+
+	return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
+}
+
+int mxl111sf_disable_656_port(struct mxl111sf_state *state)
+{
+	mxl_debug("()");
+
+	return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
+}
+
+int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
+{
+	mxl_debug("()");
+
+	return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
+}
+
+/* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
+int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
+			    unsigned int parallel_serial,
+			    unsigned int msb_lsb_1st,
+			    unsigned int clock_phase,
+			    unsigned int mpeg_valid_pol,
+			    unsigned int mpeg_sync_pol)
+{
+	int ret;
+	u8 mode, tmp;
+
+	mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
+		  clock_phase, mpeg_valid_pol, mpeg_sync_pol);
+
+	/* Enable PIN MUX */
+	ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
+	mxl_fail(ret);
+
+	/* Configure MPEG Clock phase */
+	mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);
+
+	if (clock_phase == TSIF_NORMAL)
+		mode &= ~V6_INVERTED_CLK_PHASE;
+	else
+		mode |= V6_INVERTED_CLK_PHASE;
+
+	ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
+	mxl_fail(ret);
+
+	/* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
+	 * Get current configuration */
+	ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
+	mxl_fail(ret);
+
+	/* Data Input mode */
+	if (parallel_serial == TSIF_INPUT_PARALLEL) {
+		/* Disable serial mode */
+		mode &= ~V6_MPEG_IN_DATA_SERIAL;
+
+		/* Enable Parallel mode */
+		mode |= V6_MPEG_IN_DATA_PARALLEL;
+	} else {
+		/* Disable Parallel mode */
+		mode &= ~V6_MPEG_IN_DATA_PARALLEL;
+
+		/* Enable Serial Mode */
+		mode |= V6_MPEG_IN_DATA_SERIAL;
+
+		/* If serial interface is chosen, configure
+		   MSB or LSB order in transmission */
+		ret = mxl111sf_read_reg(state,
+					V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
+					&tmp);
+		mxl_fail(ret);
+
+		if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
+			tmp |= V6_MPEG_SER_MSB_FIRST;
+		else
+			tmp &= ~V6_MPEG_SER_MSB_FIRST;
+
+		ret = mxl111sf_write_reg(state,
+					 V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
+					 tmp);
+		mxl_fail(ret);
+	}
+
+	/* MPEG Sync polarity */
+	if (mpeg_sync_pol == TSIF_NORMAL)
+		mode &= ~V6_INVERTED_MPEG_SYNC;
+	else
+		mode |= V6_INVERTED_MPEG_SYNC;
+
+	/* MPEG Valid polarity */
+	if (mpeg_valid_pol == 0)
+		mode &= ~V6_INVERTED_MPEG_VALID;
+	else
+		mode |= V6_INVERTED_MPEG_VALID;
+
+	ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
+	mxl_fail(ret);
+
+	return ret;
+}
+
+int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
+{
+	static struct mxl111sf_reg_ctrl_info init_i2s[] = {
+		{0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
+		{0x15, 0x60, 0x60}, /* Enable I2S */
+		{0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
+				       Inverted 656 Clock, I2S_SOFT_RESET,
+				       0 : Normal operation, 1 : Reset State */
+#if 0
+		{0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
+#endif
+		{0x00, 0xff, 0x02}, /* Change to Control Page */
+		{0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
+		{0x00, 0xff, 0x00},
+		{0,    0,    0}
+	};
+	int ret;
+
+	mxl_debug("(0x%02x)", sample_size);
+
+	ret = mxl111sf_ctrl_program_regs(state, init_i2s);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
+	mxl_fail(ret);
+fail:
+	return ret;
+}
+
+int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
+{
+	static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
+		{0x15, 0x40, 0x00},
+		{0,    0,    0}
+	};
+
+	mxl_debug("()");
+
+	return mxl111sf_ctrl_program_regs(state, disable_i2s);
+}
+
+int mxl111sf_config_i2s(struct mxl111sf_state *state,
+			u8 msb_start_pos, u8 data_width)
+{
+	int ret;
+	u8 tmp;
+
+	mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);
+
+	ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
+	if (mxl_fail(ret))
+		goto fail;
+
+	tmp &= 0xe0;
+	tmp |= msb_start_pos;
+	ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
+	if (mxl_fail(ret))
+		goto fail;
+
+	tmp &= 0xe0;
+	tmp |= data_width;
+	ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
+	mxl_fail(ret);
+fail:
+	return ret;
+}
+
+int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
+{
+	u8 val;
+	int ret;
+
+	mxl_debug("(%d)", onoff);
+
+	ret = mxl111sf_write_reg(state, 0x00, 0x02);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
+	if (mxl_fail(ret))
+		goto fail;
+
+	if (onoff)
+		val |= 0x04;
+	else
+		val &= ~0x04;
+
+	ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_write_reg(state, 0x00, 0x00);
+	if (mxl_fail(ret))
+		goto fail;
+fail:
+	return ret;
+}
+
+int mxl111sf_idac_config(struct mxl111sf_state *state,
+			 u8 control_mode, u8 current_setting,
+			 u8 current_value, u8 hysteresis_value)
+{
+	int ret;
+	u8 val;
+	/* current value will be set for both automatic & manual IDAC control */
+	val = current_value;
+
+	if (control_mode == IDAC_MANUAL_CONTROL) {
+		/* enable manual control of IDAC */
+		val |= IDAC_MANUAL_CONTROL_BIT_MASK;
+
+		if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
+			/* enable current sinking in manual mode */
+			val |= IDAC_CURRENT_SINKING_BIT_MASK;
+		else
+			/* disable current sinking in manual mode */
+			val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
+	} else {
+		/* disable manual control of IDAC */
+		val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;
+
+		/* set hysteresis value  reg: 0x0B<5:0> */
+		ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
+					 (hysteresis_value & 0x3F));
+	}
+
+	ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
+
+	return val;
+}
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */

drivers/media/dvb/dvb-usb/mxl111sf-phy.h

+/*
+ *  mxl111sf-phy.h - driver for the MaxLinear MXL111SF
+ *
+ *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_PHY_H_
+#define _DVB_USB_MXL111SF_PHY_H_
+
+#include "mxl111sf.h"
+
+int mxl1x1sf_soft_reset(struct mxl111sf_state *state);
+int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode);
+int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff);
+int mxl111sf_disable_656_port(struct mxl111sf_state *state);
+int mxl111sf_init_tuner_demod(struct mxl111sf_state *state);
+int mxl111sf_enable_usb_output(struct mxl111sf_state *state);
+int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
+			    unsigned int parallel_serial,
+			    unsigned int msb_lsb_1st,
+			    unsigned int clock_phase,
+			    unsigned int mpeg_valid_pol,
+			    unsigned int mpeg_sync_pol);
+int mxl111sf_config_i2s(struct mxl111sf_state *state,
+			u8 msb_start_pos, u8 data_width);
+int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size);
+int mxl111sf_disable_i2s_port(struct mxl111sf_state *state);
+int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff);
+int mxl111sf_idac_config(struct mxl111sf_state *state,
+			 u8 control_mode, u8 current_setting,
+			 u8 current_value, u8 hysteresis_value);
+
+#endif /* _DVB_USB_MXL111SF_PHY_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */

drivers/media/dvb/dvb-usb/mxl111sf-reg.h

+/*
+ *  mxl111sf-reg.h - driver for the MaxLinear MXL111SF
+ *
+ *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DVB_USB_MXL111SF_REG_H_
+#define _DVB_USB_MXL111SF_REG_H_
+
+#define CHIP_ID_REG                  0xFC
+#define TOP_CHIP_REV_ID_REG          0xFA
+
+#define V6_SNR_RB_LSB_REG            0x27
+#define V6_SNR_RB_MSB_REG            0x28
+
+#define V6_N_ACCUMULATE_REG          0x11
+#define V6_RS_AVG_ERRORS_LSB_REG     0x2C
+#define V6_RS_AVG_ERRORS_MSB_REG     0x2D
+
+#define V6_IRQ_STATUS_REG            0x24
+#define  IRQ_MASK_FEC_LOCK       0x10
+
+#define V6_SYNC_LOCK_REG             0x28
+#define SYNC_LOCK_MASK           0x10
+
+#define V6_RS_LOCK_DET_REG           0x28
+#define  RS_LOCK_DET_MASK        0x08
+
+#define V6_INITACQ_NODETECT_REG    0x20
+#define V6_FORCE_NFFT_CPSIZE_REG   0x20
+
+#define V6_CODE_RATE_TPS_REG       0x29
+#define V6_CODE_RATE_TPS_MASK      0x07
+
+
+#define V6_CP_LOCK_DET_REG        0x28
+#define V6_CP_LOCK_DET_MASK       0x04
+
+#define V6_TPS_HIERACHY_REG        0x29
+#define V6_TPS_HIERARCHY_INFO_MASK  0x40
+
+#define V6_MODORDER_TPS_REG        0x2A
+#define V6_PARAM_CONSTELLATION_MASK   0x30
+
+#define V6_MODE_TPS_REG            0x2A
+#define V6_PARAM_FFT_MODE_MASK        0x0C
+
+
+#define V6_CP_TPS_REG             0x29
+#define V6_PARAM_GI_MASK              0x30
+
+#define V6_TPS_LOCK_REG           0x2A
+#define V6_PARAM_TPS_LOCK_MASK        0x40
+
+#define V6_FEC_PER_COUNT_REG      0x2E
+#define V6_FEC_PER_SCALE_REG      0x2B
+#define V6_FEC_PER_SCALE_MASK        0x03
+#define V6_FEC_PER_CLR_REG        0x20
+#define V6_FEC_PER_CLR_MASK          0x01
+
+#define V6_PIN_MUX_MODE_REG       0x1B
+#define V6_ENABLE_PIN_MUX            0x1E
+
+#define V6_I2S_NUM_SAMPLES_REG    0x16
+
+#define V6_MPEG_IN_CLK_INV_REG    0x17
+#define V6_MPEG_IN_CTRL_REG       0x18
+
+#define V6_INVERTED_CLK_PHASE       0x20
+#define V6_MPEG_IN_DATA_PARALLEL    0x01
+#define V6_MPEG_IN_DATA_SERIAL      0x02
+
+#define V6_INVERTED_MPEG_SYNC       0x04
+#define V6_INVERTED_MPEG_VALID      0x08
+
+#define TSIF_INPUT_PARALLEL         0
+#define TSIF_INPUT_SERIAL           1
+#define TSIF_NORMAL                 0
+
+#define V6_MPEG_INOUT_BIT_ORDER_CTRL_REG  0x19
+#define V6_MPEG_SER_MSB_FIRST                0x80
+#define MPEG_SER_MSB_FIRST_ENABLED        0x01
+
+#define V6_656_I2S_BUFF_STATUS_REG   0x2F
+#define V6_656_OVERFLOW_MASK_BIT         0x08
+#define V6_I2S_OVERFLOW_MASK_BIT         0x01
+
+#define V6_I2S_STREAM_START_BIT_REG  0x14
+#define V6_I2S_STREAM_END_BIT_REG    0x15
+#define I2S_RIGHT_JUSTIFIED     0
+#define I2S_LEFT_JUSTIFIED      1
+#define I2S_DATA_FORMAT         2
+
+#define V6_TUNER_LOOP_THRU_CONTROL_REG  0x09
+#define V6_ENABLE_LOOP_THRU               0x01
+
+#define TOTAL_NUM_IF_OUTPUT_FREQ       16
+
+#define TUNER_NORMAL_IF_SPECTRUM       0x0
+#define TUNER_INVERT_IF_SPECTRUM       0x10
+
+#define V6_TUNER_IF_SEL_REG              0x06
+#define V6_TUNER_IF_FCW_REG              0x3C
+#define V6_TUNER_IF_FCW_BYP_REG          0x3D
+#define V6_RF_LOCK_STATUS_REG            0x23
+
+#define NUM_DIG_TV_CHANNEL     1000
+
+#define V6_DIG_CLK_FREQ_SEL_REG  0x07
+#define V6_REF_SYNTH_INT_REG     0x5C
+#define V6_REF_SYNTH_REMAIN_REG  0x58
+#define V6_DIG_RFREFSELECT_REG   0x32
+#define V6_XTAL_CLK_OUT_GAIN_REG   0x31
+#define V6_TUNER_LOOP_THRU_CTRL_REG      0x09
+#define V6_DIG_XTAL_ENABLE_REG  0x06
+#define V6_DIG_XTAL_BIAS_REG  0x66
+#define V6_XTAL_CAP_REG    0x08
+
+#define V6_GPO_CTRL_REG     0x18
+#define MXL_GPO_0           0x00
+#define MXL_GPO_1           0x01
+#define V6_GPO_0_MASK       0x10
+#define V6_GPO_1_MASK       0x20
+
+#define V6_111SF_GPO_CTRL_REG     0x19
+#define MXL_111SF_GPO_1               0x00
+#define MXL_111SF_GPO_2               0x01
+#define MXL_111SF_GPO_3               0x02
+#define MXL_111SF_GPO_4               0x03
+#define MXL_111SF_GPO_5               0x04
+#define MXL_111SF_GPO_6               0x05
+#define MXL_111SF_GPO_7               0x06
+
+#define MXL_111SF_GPO_0_MASK          0x01
+#define MXL_111SF_GPO_1_MASK          0x02
+#define MXL_111SF_GPO_2_MASK          0x04
+#define MXL_111SF_GPO_3_MASK          0x08
+#define MXL_111SF_GPO_4_MASK          0x10
+#define MXL_111SF_GPO_5_MASK          0x20
+#define MXL_111SF_GPO_6_MASK          0x40
+
+#define V6_ATSC_CONFIG_REG  0x0A
+
+#define MXL_MODE_REG    0x03
+#define START_TUNE_REG  0x1C
+
+#define V6_IDAC_HYSTERESIS_REG    0x0B
+#define V6_IDAC_SETTINGS_REG      0x0C
+#define IDAC_MANUAL_CONTROL             1
+#define IDAC_CURRENT_SINKING_ENABLE     1
+#define IDAC_MANUAL_CONTROL_BIT_MASK      0x80
+#define IDAC_CURRENT_SINKING_BIT_MASK     0x40
+
+#define V8_SPI_MODE_REG  0xE9
+
+#define V6_DIG_RF_PWR_LSB_REG  0x46
+#define V6_DIG_RF_PWR_MSB_REG  0x47
+
+#endif /* _DVB_USB_MXL111SF_REG_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */

drivers/media/dvb/dvb-usb/mxl111sf-tuner.h

+/*
+ *  mxl111sf-tuner.h - driver for the MaxLinear MXL111SF CMOS tuner
+ *
+ *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MXL111SF_TUNER_H__
+#define __MXL111SF_TUNER_H__
+
+#include "dvb_frontend.h"
+
+#include "mxl111sf.h"
+
+enum mxl_if_freq {
+#if 0
+	MXL_IF_LO    = 0x00, /* other IF < 9MHz */
+#endif
+	MXL_IF_4_0   = 0x01, /* 4.0   MHz */
+	MXL_IF_4_5   = 0x02, /* 4.5   MHz */
+	MXL_IF_4_57  = 0x03, /* 4.57  MHz */
+	MXL_IF_5_0   = 0x04, /* 5.0   MHz */
+	MXL_IF_5_38  = 0x05, /* 5.38  MHz */
+	MXL_IF_6_0   = 0x06, /* 6.0   MHz */
+	MXL_IF_6_28  = 0x07, /* 6.28  MHz */
+	MXL_IF_7_2   = 0x08, /* 7.2   MHz */
+	MXL_IF_35_25 = 0x09, /* 35.25 MHz */
+	MXL_IF_36    = 0x0a, /* 36    MHz */
+	MXL_IF_36_15 = 0x0b, /* 36.15 MHz */
+	MXL_IF_44    = 0x0c, /* 44    MHz */
+#if 0
+	MXL_IF_HI    = 0x0f, /* other IF > 35 MHz and < 45 MHz */
+#endif
+};
+
+struct mxl111sf_tuner_config {
+	enum mxl_if_freq if_freq;
+	unsigned int invert_spectrum:1;
+
+	int (*read_reg)(struct mxl111sf_state *state, u8 addr, u8 *data);
+	int (*write_reg)(struct mxl111sf_state *state, u8 addr, u8 data);
+	int (*program_regs)(struct mxl111sf_state *state,
+			    struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
+	int (*top_master_ctrl)(struct mxl111sf_state *state, int onoff);
+	int (*ant_hunt)(struct dvb_frontend *fe);
+};
+
+/* ------------------------------------------------------------------------ */
+
+#if defined(CONFIG_DVB_USB_MXL111SF) || \
+	(defined(CONFIG_DVB_USB_MXL111SF_MODULE) && defined(MODULE))
+extern
+struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
+					   struct mxl111sf_state *mxl_state,
+					   struct mxl111sf_tuner_config *cfg);
+#else
+static inline
+struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
+					   struct mxl111sf_state *mxl_state
+					   struct mxl111sf_tuner_config *cfg)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+#endif /* __MXL111SF_TUNER_H__ */
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
+

drivers/media/dvb/dvb-usb/mxl111sf.h

+/*
+ * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com)
+ *
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms of the GNU General Public License as published by the Free
+ *   Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+
+#ifndef _DVB_USB_MXL111SF_H_
+#define _DVB_USB_MXL111SF_H_
+
+#ifdef DVB_USB_LOG_PREFIX
+#undef DVB_USB_LOG_PREFIX
+#endif
+#define DVB_USB_LOG_PREFIX "mxl111sf"
+#include "dvb-usb.h"
+#include <media/tveeprom.h>
+
+#define MXL_EP1_REG_READ     1
+#define MXL_EP2_REG_WRITE    2
+#define MXL_EP3_INTERRUPT    3
+#define MXL_EP4_MPEG2        4
+#define MXL_EP5_I2S          5
+#define MXL_EP6_656          6
+#define MXL_EP6_MPEG2        6
+
+#ifdef USING_ENUM_mxl111sf_current_mode
+enum mxl111sf_current_mode {
+	mxl_mode_dvbt = MXL_EP4_MPEG2,
+	mxl_mode_mh   = MXL_EP5_I2S,
+	mxl_mode_atsc = MXL_EP6_MPEG2,
+};
+#endif
+
+enum mxl111sf_gpio_port_expander {
+	mxl111sf_gpio_hw,
+	mxl111sf_PCA9534,
+};
+
+struct mxl111sf_state {
+	struct dvb_usb_device *d;
+
+	enum mxl111sf_gpio_port_expander gpio_port_expander;
+	u8 port_expander_addr;
+
+	u8 chip_id;
+	u8 chip_ver;
+#define MXL111SF_V6     1
+#define MXL111SF_V8_100 2
+#define MXL111SF_V8_200 3
+	u8 chip_rev;
+
+#ifdef USING_ENUM_mxl111sf_current_mode
+	enum mxl111sf_current_mode current_mode;
+#endif
+
+#define MXL_TUNER_MODE         0
+#define MXL_SOC_MODE           1
+#define MXL_DEV_MODE_MASK      0x01
+#if 1
+	int device_mode;
+#endif
+	/* use usb alt setting 1 for EP4 ISOC transfer (dvb-t),
+				     EP5 BULK transfer (atsc-mh),
+				     EP6 BULK transfer (atsc/qam),
+	   use usb alt setting 2 for EP4 BULK transfer (dvb-t),
+				     EP5 ISOC transfer (atsc-mh),
+				     EP6 ISOC transfer (atsc/qam),
+	 */
+	int alt_mode;
+	int gpio_mode;
+	struct tveeprom tv;
+
+	struct mutex fe_lock;
+};
+
+struct mxl111sf_adap_state {
+	int alt_mode;
+	int gpio_mode;
+	int device_mode;
+	int ep6_clockphase;
+	int (*fe_init)(struct dvb_frontend *);
+	int (*fe_sleep)(struct dvb_frontend *);
+};
+
+int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data);
+int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data);
+
+struct mxl111sf_reg_ctrl_info {
+	u8 addr;
+	u8 mask;
+	u8 data;
+};
+
+int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
+			    u8 addr, u8 mask, u8 data);
+int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state,
+			       struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
+
+/* needed for hardware i2c functions in mxl111sf-i2c.c:
+ * mxl111sf_i2c_send_data / mxl111sf_i2c_get_data */
+int mxl111sf_ctrl_msg(struct dvb_usb_device *d,
+		      u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen);
+
+#define mxl_printk(kern, fmt, arg...) \
+	printk(kern "%s: " fmt "\n", __func__, ##arg)
+
+#define mxl_info(fmt, arg...) \
+	mxl_printk(KERN_INFO, fmt, ##arg)
+
+extern int dvb_usb_mxl111sf_debug;
+#define mxl_debug(fmt, arg...) \
+	if (dvb_usb_mxl111sf_debug) \
+		mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+#define MXL_I2C_DBG 0x04
+#define MXL_ADV_DBG 0x10
+#define mxl_debug_adv(fmt, arg...) \
+	if (dvb_usb_mxl111sf_debug & MXL_ADV_DBG) \
+		mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+#define mxl_i2c(fmt, arg...) \
+	if (dvb_usb_mxl111sf_debug & MXL_I2C_DBG) \
+		mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+#define mxl_i2c_adv(fmt, arg...) \
+	if ((dvb_usb_mxl111sf_debug & (MXL_I2C_DBG | MXL_ADV_DBG)) == \
+		(MXL_I2C_DBG | MXL_ADV_DBG)) \
+			mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+/* The following allows the mxl_fail() macro defined below to work
+ * in externel modules, such as mxl111sf-tuner.ko, even though
+ * dvb_usb_mxl111sf_debug is not defined within those modules */
+#ifdef __MXL111SF_TUNER_H__
+#define MXL_ADV_DEBUG_ENABLED MXL_ADV_DBG
+#else
+#define MXL_ADV_DEBUG_ENABLED dvb_usb_mxl111sf_debug
+#endif
+
+#define mxl_fail(ret)							\
+({									\
+	int __ret;							\
+	__ret = (ret < 0);						\
+	if ((__ret) && (MXL_ADV_DEBUG_ENABLED & MXL_ADV_DBG))		\
+		mxl_printk(KERN_ERR, "error %d on line %d",		\
+			   ret, __LINE__);				\
+	__ret;								\
+})
+
+#endif /* _DVB_USB_MXL111SF_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */