Commit 4ce03bb8 authored by Marijn Suijten's avatar Marijn Suijten Committed by Bjorn Andersson

arm64: dts: qcom: sdm845-tama: Add volume up and camera GPIO keys

Tama has four GPIO-wired keys: two for camera focus and shutter /
snapshot, and two more for volume up and down.  As per the comment these
used to not work because the necessary pin bias was missing, which is
now set via pinctrl on pm8998_gpios.

The missing bias has also been added to the existing volume down button,
which receives a node name and label cleanup at the same time to be more
consistent with other DTS and the newly added buttons.  Its deprecated
gpio-key,wakeup property has also been replaced with wakeup-source.

Note that volume up is also available through the usual PON RESIN node,
but unlike other platforms only triggers when the power button is held
down at the same time making it unsuitable to serve as KEY_VOLUMEUP.

Fixes: 30a7f99b ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)")
Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: default avatarMarijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109234133.365644-1-marijn.suijten@somainline.org
parent 19e509d5
......@@ -4,6 +4,7 @@
*/
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sdm845.dtsi"
#include "pm8005.dtsi"
......@@ -17,14 +18,43 @@ / {
gpio-keys {
compatible = "gpio-keys";
/* Neither Camera Focus, nor Camera Shutter seem to work... */
pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>;
pinctrl-names = "default";
key-camera-focus {
label = "Camera Focus";
gpios = <&pm8998_gpios 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_CAMERA_FOCUS>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
key-camera-snapshot {
label = "Camera Snapshot";
gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_CAMERA>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
key-vol-down {
label = "volume_down";
key-volume-down {
label = "Volume Down";
gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <15>;
gpio-key,wakeup;
linux,can-disable;
wakeup-source;
};
key-volume-up {
label = "Volume Up";
gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
};
......@@ -358,6 +388,40 @@ &i2c14 {
/* AMS TCS3490 RGB+IR color sensor @ 72 */
};
&pm8998_gpios {
focus_n: focus-n-state {
pins = "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <0>;
bias-pull-up;
input-enable;
};
vol_down_n: vol-down-n-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <0>;
bias-pull-up;
input-enable;
};
vol_up_n: vol-up-n-state {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <0>;
bias-pull-up;
input-enable;
};
snapshot_n: snapshot-n-state {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <0>;
bias-pull-up;
input-enable;
};
};
&qupv3_id_0 {
status = "okay";
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment