Merge branch 'topic/at_xdmac' of git://git.infradead.org/users/vkoul/slave-dma into at91-3.19-dt2

Documentation/devicetree/bindings/dma/atmel-xdma.txt

+* Atmel Extensible Direct Memory Access Controller (XDMAC)
+
+* XDMA Controller
+Required properties:
+- compatible: Should be "atmel,<chip>-dma".
+  <chip> compatible description:
+  - sama5d4: first SoC adding the XDMAC
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain DMA interrupt.
+- #dma-cells: Must be <1>, used to represent the number of integer cells in
+the dmas property of client devices.
+  - The 1st cell specifies the channel configuration register:
+    - bit 13: SIF, source interface identifier, used to get the memory
+    interface identifier,
+    - bit 14: DIF, destination interface identifier, used to get the peripheral
+    interface identifier,
+    - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+dma1: dma-controller@f0004000 {
+	compatible = "atmel,sama5d4-dma";
+	reg = <0xf0004000 0x200>;
+	interrupts = <50 4 0>;
+	#dma-cells = <1>;
+};
+
+
+* DMA clients
+DMA clients connected to the Atmel XDMA controller must use the format
+described in the dma.txt file, using a one-cell specifier for each channel.
+The two cells in order are:
+1. A phandle pointing to the DMA controller.
+2. Channel configuration register. Configurable fields are:
+    - bit 13: SIF, source interface identifier, used to get the memory
+    interface identifier,
+    - bit 14: DIF, destination interface identifier, used to get the peripheral
+    interface identifier,
+  - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+i2c2: i2c@f8024000 {
+	compatible = "atmel,at91sam9x5-i2c";
+	reg = <0xf8024000 0x4000>;
+	interrupts = <34 4 6>;
+	dmas = <&dma1
+		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+		 | AT91_XDMAC_DT_PERID(6))>,
+	       <&dma1
+		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+		| AT91_XDMAC_DT_PERID(7))>;
+	dma-names = "tx", "rx";
+};

MAINTAINERS

@@ -1713,6 +1713,13 @@ F:	drivers/dma/at_hdmac.c
 F:	drivers/dma/at_hdmac_regs.h
 F:	include/linux/platform_data/dma-atmel.h
 
+ATMEL XDMA DRIVER
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+L:	linux-arm-kernel@lists.infradead.org
+L:	dmaengine@vger.kernel.org
+S:	Supported
+F:	drivers/dma/at_xdmac.c
+
 ATMEL I2C DRIVER
 M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 L:	linux-i2c@vger.kernel.org

drivers/dma/Kconfig

@@ -107,6 +107,13 @@ config AT_HDMAC
 	help
 	  Support the Atmel AHB DMA controller.
 
+config AT_XDMAC
+	tristate "Atmel XDMA support"
+	depends on ARCH_AT91
+	select DMA_ENGINE
+	help
+	  Support the Atmel XDMA controller.
+
 config FSL_DMA
 	tristate "Freescale Elo series DMA support"
 	depends on FSL_SOC

drivers/dma/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC_CORE) += dw/
 obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
+obj-$(CONFIG_AT_XDMAC) += at_xdmac.o
 obj-$(CONFIG_MX3_IPU) += ipu/
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
 obj-$(CONFIG_SH_DMAE_BASE) += sh/

include/dt-bindings/dma/at91.h

@@ -9,6 +9,8 @@
 #ifndef __DT_BINDINGS_AT91_DMA_H__
 #define __DT_BINDINGS_AT91_DMA_H__
 
+/* ---------- HDMAC ---------- */
+
 /*
  * Source and/or destination peripheral ID
  */
@@ -24,4 +26,27 @@
 #define AT91_DMA_CFG_FIFOCFG_ALAP	(0x1 << AT91_DMA_CFG_FIFOCFG_OFFSET)	/* largest defined AHB burst */
 #define AT91_DMA_CFG_FIFOCFG_ASAP	(0x2 << AT91_DMA_CFG_FIFOCFG_OFFSET)	/* single AHB access */
 
+
+/* ---------- XDMAC ---------- */
+#define AT91_XDMAC_DT_MEM_IF_MASK	(0x1)
+#define AT91_XDMAC_DT_MEM_IF_OFFSET	(13)
+#define AT91_XDMAC_DT_MEM_IF(mem_if)	(((mem_if) & AT91_XDMAC_DT_MEM_IF_MASK) \
+					<< AT91_XDMAC_DT_MEM_IF_OFFSET)
+#define AT91_XDMAC_DT_GET_MEM_IF(cfg)	(((cfg) >> AT91_XDMAC_DT_MEM_IF_OFFSET) \
+					& AT91_XDMAC_DT_MEM_IF_MASK)
+
+#define AT91_XDMAC_DT_PER_IF_MASK	(0x1)
+#define AT91_XDMAC_DT_PER_IF_OFFSET	(14)
+#define AT91_XDMAC_DT_PER_IF(per_if)	(((per_if) & AT91_XDMAC_DT_PER_IF_MASK) \
+					<< AT91_XDMAC_DT_PER_IF_OFFSET)
+#define AT91_XDMAC_DT_GET_PER_IF(cfg)	(((cfg) >> AT91_XDMAC_DT_PER_IF_OFFSET) \
+					& AT91_XDMAC_DT_PER_IF_MASK)
+
+#define AT91_XDMAC_DT_PERID_MASK	(0x7f)
+#define AT91_XDMAC_DT_PERID_OFFSET	(24)
+#define AT91_XDMAC_DT_PERID(perid)	(((perid) & AT91_XDMAC_DT_PERID_MASK) \
+					<< AT91_XDMAC_DT_PERID_OFFSET)
+#define AT91_XDMAC_DT_GET_PERID(cfg)	(((cfg) >> AT91_XDMAC_DT_PERID_OFFSET) \
+					& AT91_XDMAC_DT_PERID_MASK)
+
 #endif /* __DT_BINDINGS_AT91_DMA_H__ */