ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100

Move i2c helpers from plat-s5pc1xx to mach-s5pc100.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

arch/arm/mach-s5pc100/Kconfig

@@ -23,6 +23,11 @@ config S5PC100_SETUP_SDHCI
         help
           Internal helper functions for S5PC100 based SDHCI systems
 
+config S5PC100_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
 config MACH_SMDKC100
 	bool "SMDKC100"
 	select CPU_S5PC100
@@ -31,9 +36,8 @@ config MACH_SMDKC100
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
-	select S5PC1XX_SETUP_I2C0
-	select S5PC1XX_SETUP_I2C1
 	select S5PC100_SETUP_FB_24BPP
+	select S5PC100_SETUP_I2C1
 	select S5PC100_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDKC100

arch/arm/mach-s5pc100/Makefile

@@ -12,10 +12,12 @@ obj-				:=
 # Core support for S5PC100 system
 
 obj-$(CONFIG_CPU_S5PC100)	+= cpu.o gpiolib.o
+obj-$(CONFIG_CPU_S5PC100)	+= setup-i2c0.o
 
 # Helper and device support
 
 obj-$(CONFIG_S5PC100_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1)	+= setup-i2c1.o
 obj-$(CONFIG_S5PC100_SETUP_SDHCI)       += setup-sdhci.o
 
 # machine support

arch/arm/plat-s5pc1xx/setup-i2c0.c → arch/arm/mach-s5pc100/setup-i2c0.c

-/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
+/* linux/arch/arm/mach-s5pc100/setup-i2c0.c
  *
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
- * Base S5PC1XX I2C bus 0 gpio configuration
+ * Base S5PC100 I2C bus 0 gpio configuration
  *
  * Based on plat-s3c64xx/setup-i2c0.c
  *

arch/arm/plat-s5pc1xx/setup-i2c1.c → arch/arm/mach-s5pc100/setup-i2c1.c

-/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+/* linux/arch/arm/mach-s5pc100/setup-i2c1.c
  *
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
- * Base S5PC1XX I2C bus 1 gpio configuration
+ * Base S5PC100 I2C bus 1 gpio configuration
  *
  * Based on plat-s3c64xx/setup-i2c1.c
  *

arch/arm/plat-s5pc1xx/Kconfig

@@ -39,20 +39,6 @@ config CPU_S5PC100_CLOCK
 
 # platform specific device setup
 
-config S5PC1XX_SETUP_I2C0
-	bool
-	default y
-	help
-	  Common setup code for i2c bus 0.
-
-	  Note, currently since i2c0 is always compiled, this setup helper
-	  is always compiled with it.
-
-config S5PC1XX_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
 config S5PC1XX_SETUP_SDHCI_GPIO
 	bool
 	help

arch/arm/plat-s5pc1xx/Makefile

@@ -23,6 +23,4 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
 
 # Device setup
 
-obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o