media: ivtv/cx18: remove ivtvdriver.org references

That URL is no longer valid, so either remove references to it or
replace it with linuxtv.org.

Rather than updating the URL I've just dropped the cx18.rst driver
documentation since it was really out of date.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: awalls@md.metrocast.net
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Documentation/media/uapi/v4l/pixfmt-reserved.rst

@@ -55,8 +55,7 @@ please make a proposal on the linux-media mailing list.
 
       - ``V4L2_PIX_FMT_HM12``
       - 'HM12'
-      - YUV 4:2:0 format used by the IVTV driver,
-	`http://www.ivtvdriver.org/ <http://www.ivtvdriver.org/>`__
+      - YUV 4:2:0 format used by the IVTV driver.
 
 	The format is documented in the kernel sources in the file
 	``Documentation/media/v4l-drivers/cx2341x.rst``

Documentation/media/v4l-drivers/cx18.rst

-.. SPDX-License-Identifier: GPL-2.0
-
-The cx18 driver
-===============
-
-.. note::
-
-   This documentation is outdated.
-
-Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
-encoder chip:
-
-1) Currently supported are:
-
-	- Hauppauge HVR-1600
-	- Compro VideoMate H900
-	- Yuan MPC718
-	- Conexant Raptor PAL/SECAM devkit
-
-2) Some people have problems getting the i2c bus to work.
-   The symptom is that the eeprom cannot be read and the card is
-   unusable. This is probably fixed, but if you have problems
-   then post to the video4linux or ivtv-users mailing list.
-
-3) VBI (raw or sliced) has not yet been implemented.
-
-4) MPEG indexing is not yet implemented.
-
-5) The driver is still a bit rough around the edges, this should
-   improve over time.
-
-
-Firmware:
-
-You can obtain the firmware files here:
-
-http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz
-
-Untar and copy the .fw files to your firmware directory.

Documentation/media/v4l-drivers/index.rst

@@ -38,7 +38,6 @@ For more details see the file COPYING in the source distribution of Linux.
 	bttv
 	cafe_ccic
 	cpia2
-	cx18
 	cx2341x
 	cx88
 	davinci-vpbe

MAINTAINERS

@@ -4427,13 +4427,10 @@ F:	drivers/net/wireless/st/cw1200/
 
 CX18 VIDEO4LINUX DRIVER
 M:	Andy Walls <awalls@md.metrocast.net>
-L:	ivtv-devel@ivtvdriver.org (subscribers-only)
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
 W:	https://linuxtv.org
-W:	http://www.ivtvdriver.org/index.php/Cx18
 S:	Maintained
-F:	Documentation/media/v4l-drivers/cx18*
 F:	drivers/media/pci/cx18/
 F:	include/uapi/linux/ivtv*
 
@@ -8836,10 +8833,9 @@ F:	drivers/media/tuners/it913x*
 
 IVTV VIDEO4LINUX DRIVER
 M:	Andy Walls <awalls@md.metrocast.net>
-L:	ivtv-devel@ivtvdriver.org (subscribers-only)
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://www.ivtvdriver.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	Documentation/media/v4l-drivers/ivtv*
 F:	drivers/media/pci/ivtv/

drivers/media/pci/cx18/cx18-cards.c

@@ -245,7 +245,7 @@ static const struct cx18_card cx18_card_mpc718 = {
 	.type = CX18_CARD_YUAN_MPC718,
 	.name = "Yuan MPC718 MiniPCI DVB-T/Analog",
 	.comment = "Experimenters needed for device to work well.\n"
-		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+		  "\tTo help, mail the linux-media list (www.linuxtv.org).\n",
 	.v4l2_capabilities = CX18_CAP_ENCODER,
 	.hw_audio_ctrl = CX18_HW_418_AV,
 	.hw_muxer = CX18_HW_GPIO_MUX,
@@ -305,7 +305,7 @@ static const struct cx18_card cx18_card_gotview_dvd3 = {
 	.type = CX18_CARD_GOTVIEW_PCI_DVD3,
 	.name = "GoTView PCI DVD3 Hybrid",
 	.comment = "Experimenters needed for device to work well.\n"
-		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+		  "\tTo help, mail the linux-media list (www.linuxtv.org).\n",
 	.v4l2_capabilities = CX18_CAP_ENCODER,
 	.hw_audio_ctrl = CX18_HW_418_AV,
 	.hw_muxer = CX18_HW_GPIO_MUX,
@@ -419,7 +419,7 @@ static const struct cx18_card cx18_card_toshiba_qosmio_dvbt = {
 	.type = CX18_CARD_TOSHIBA_QOSMIO_DVBT,
 	.name = "Toshiba Qosmio DVB-T/Analog",
 	.comment = "Experimenters and photos needed for device to work well.\n"
-		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+		  "\tTo help, mail the linux-media list (www.linuxtv.org).\n",
 	.v4l2_capabilities = CX18_CAP_ENCODER,
 	.hw_audio_ctrl = CX18_HW_418_AV,
 	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL,
@@ -462,7 +462,7 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = {
 	.type = CX18_CARD_LEADTEK_PVR2100,
 	.name = "Leadtek WinFast PVR2100",
 	.comment = "Experimenters and photos needed for device to work well.\n"
-		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+		  "\tTo help, mail the linux-media list (www.linuxtv.org).\n",
 	.v4l2_capabilities = CX18_CAP_ENCODER,
 	.hw_audio_ctrl = CX18_HW_418_AV,
 	.hw_muxer = CX18_HW_GPIO_MUX,

drivers/media/pci/cx18/cx18-driver.c

@@ -676,7 +676,7 @@ static void cx18_process_options(struct cx18 *cx)
 			 cx->pci_dev->subsystem_device);
 		CX18_ERR("Defaulting to %s card\n", cx->card->name);
 		CX18_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
-		CX18_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
+		CX18_ERR("card you have to the linux-media mailinglist (www.linuxtv.org)\n");
 		CX18_ERR("Prefix your subject line with [UNKNOWN CX18 CARD].\n");
 	}
 	cx->v4l2_cap = cx->card->v4l2_capabilities;

drivers/media/pci/ivtv/Kconfig

@@ -24,7 +24,7 @@ config VIDEO_IVTV
 	  PCI personal video recorder devices.
 
 	  This is used in devices such as the Hauppauge PVR-150/250/350/500
-	  cards. There is a driver homepage at <http://www.ivtvdriver.org>.
+	  cards.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ivtv.
@@ -67,8 +67,7 @@ config VIDEO_FB_IVTV
 	  This is a framebuffer driver for the Conexant cx23415 MPEG
 	  encoder/decoder.
 
-	  This is used in the Hauppauge PVR-350 card. There is a driver
-	  homepage at <http://www.ivtvdriver.org>.
+	  This is used in the Hauppauge PVR-350 card.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ivtvfb.

drivers/media/pci/ivtv/ivtv-driver.c

@@ -23,7 +23,6 @@
  * Driver for the Conexant CX23415/CX23416 chip.
  * Author: Kevin Thayer (nufan_wfk at yahoo.com)
  * License: GPL
- * http://www.ivtvdriver.org
  *
  * -----
  * MPG600/MPG160 support by  T.Adachi <tadachi@tadachi-net.com>
@@ -723,7 +722,7 @@ static void ivtv_process_options(struct ivtv *itv)
 		IVTV_ERR("              %s based\n", chipname);
 		IVTV_ERR("Defaulting to %s card\n", itv->card->name);
 		IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
-		IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
+		IVTV_ERR("card you have to the linux-media mailinglist (www.linuxtv.org)\n");
 		IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
 	}
 	itv->v4l2_cap = itv->card->v4l2_capabilities;

drivers/media/pci/ivtv/ivtv-driver.h

@@ -28,7 +28,6 @@
  * Driver for the cx23415/6 chip.
  * Author: Kevin Thayer (nufan_wfk at yahoo.com)
  * License: GPL
- * http://www.ivtvdriver.org
  *
  * -----
  * MPG600/MPG160 support by  T.Adachi <tadachi@tadachi-net.com>