Merge tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC fixes from Arnd Bergmann:
 "There are seven oneline patches that each address a distinct problem
  on the NXP i.MX platform, mostly the popular i.MX8M variant.

  The only other two fixes are for error handling on the psci firmware
  driver and SD card support on the milkv duo riscv board"

* tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  firmware: psci: Fix return value from psci_system_suspend()
  riscv: dts: sophgo: disable write-protection for milkv duo
  arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
  arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
  arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
  arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
  arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
  arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
  arm64: dts: freescale: imx8mm-verdin: Fix GPU speed

arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi

@@ -85,7 +85,7 @@ led-user {
 		};
 	};
 
-	panel {
+	panel_dpi: panel {
 		compatible = "sii,43wvf1g";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_display_power>;

arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso

@@ -10,8 +10,6 @@
 /plugin/;
 
 &{/} {
-	/delete-node/ panel;
-
 	hdmi: connector-hdmi {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -82,6 +80,10 @@ sii9022_out: endpoint {
 	};
 };
 
+&panel_dpi {
+	status = "disabled";
+};
+
 &tve {
 	status = "disabled";
 };

arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi

@@ -6,6 +6,7 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "imx8mm.dtsi"
+#include "imx8mm-overdrive.dtsi"
 
 / {
 	chosen {
@@ -935,7 +936,7 @@ pinctrl_gpio8: gpio8grp {
 	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
 	pinctrl_gpio_9_dsi: gpio9dsigrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x146>;	/* SODIMM 17 */
+			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x1c6>;	/* SODIMM 17 */
 	};
 
 	/* Verdin GPIO_10_DSI (pulled-up as active-low) */

arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi

@@ -254,7 +254,7 @@ tc_bridge: bridge@f {
 				  <&clk IMX8MP_CLK_CLKOUT2>,
 				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
-		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
+		assigned-clock-rates = <13000000>, <13000000>, <208000000>;
 		reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 

arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi

@@ -219,7 +219,7 @@ &uart3 {
 
 	bluetooth {
 		compatible = "brcm,bcm4330-bt";
-		shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 	};
 };
 

arch/arm64/boot/dts/freescale/imx8qm-mek.dts

@@ -36,7 +36,7 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
 		regulator-name = "SD1_SPWR";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
-		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 

arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts

@@ -296,7 +296,6 @@ &usdhc2 {
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	bus-width = <4>;
 	status = "okay";
-	no-sdio;
 	no-mmc;
 };
 

arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts

@@ -45,6 +45,7 @@ &sdhci0 {
 	no-1-8-v;
 	no-mmc;
 	no-sdio;
+	disable-wp;
 };
 
 &uart0 {

drivers/firmware/psci/psci.c

@@ -497,10 +497,12 @@ int psci_cpu_suspend_enter(u32 state)
 
 static int psci_system_suspend(unsigned long unused)
 {
+	int err;
 	phys_addr_t pa_cpu_resume = __pa_symbol(cpu_resume);
 
-	return invoke_psci_fn(PSCI_FN_NATIVE(1_0, SYSTEM_SUSPEND),
+	err = invoke_psci_fn(PSCI_FN_NATIVE(1_0, SYSTEM_SUSPEND),
 			      pa_cpu_resume, 0, 0);
+	return psci_to_linux_errno(err);
 }
 
 static int psci_system_suspend_enter(suspend_state_t state)