arm64: dts: qcom: sa8295-adp: Enable DP instances

The SA8295P ADP has, among other interfaces, six MiniDP connectors which
are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.

Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
DP PHYs and link them all together.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111035906.2975494-4-quic_bjorande@quicinc.com

arch/arm64/boot/dts/qcom/sa8295p-adp.dts

@@ -24,6 +24,90 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	dp2-connector {
+		compatible = "dp-connector";
+		label = "DP2";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp0_phy_out>;
+			};
+		};
+	};
+
+	dp3-connector {
+		compatible = "dp-connector";
+		label = "DP3";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp1_phy_out>;
+			};
+		};
+	};
+
+	edp0-connector {
+		compatible = "dp-connector";
+		label = "EDP0";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp0_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp2_phy_out>;
+			};
+		};
+	};
+
+	edp1-connector {
+		compatible = "dp-connector";
+		label = "EDP1";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp3_phy_out>;
+			};
+		};
+	};
+
+	edp2-connector {
+		compatible = "dp-connector";
+		label = "EDP2";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp2_phy_out>;
+			};
+		};
+	};
+
+	edp3-connector {
+		compatible = "dp-connector";
+		label = "EDP3";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp3_phy_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -160,13 +244,168 @@ vreg_l7g: ldo7 {
 
 		vreg_l8g: ldo8 {
 			regulator-name = "vreg_l8g";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11g: ldo11 {
+			regulator-name = "vreg_l11g";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 };
 
+&dispcc0 {
+	status = "okay";
+};
+
+&dispcc1 {
+	status = "okay";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp2 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp2_phy_out: endpoint {
+				remote-endpoint = <&edp0_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp2_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss0_dp3 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp3_phy_out: endpoint {
+				remote-endpoint = <&edp1_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp3_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1 {
+	status = "okay";
+};
+
+&mdss1_dp0 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp0_phy_out: endpoint {
+				remote-endpoint = <&dp2_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp0_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1_dp1 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp1_phy_out: endpoint {
+				remote-endpoint = <&dp3_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp1_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1_dp2 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp2_phy_out: endpoint {
+				remote-endpoint = <&edp2_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp2_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1_dp3 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp3_phy_out: endpoint {
+				remote-endpoint = <&edp3_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp3_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
 &pcie2a {
 	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;