Merge branch 'stmmac-dwmac-rk'

Romain Perier says:

====================
net: stmmac: dwmac-rk: Fix phy regulator issues

This series fixes few issues in dwmac-rk:

1. Voltage settings was hardcoded into the driver for the phy regulator.
   The driver now uses the default voltage settings found in the devicetree,
   which are applied throught the regulator framework.
2. The regulator name used to power on or power off the phy was put in the devicetree
   variable "phy_regulator", which is not standard and added a lot of code for nothing.
   The driver now uses the devicetree property "phy-supply" and the corresponding functions
   to manipulate this regulator.

The corresponding devicetree files are also updated. As this new binding for
rk3288 has not been released with any official kernel yet (not until 3.20),
I don't need to care about keeping compatibility with the old non standard property.
====================
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/rockchip-dwmac.txt

@@ -33,6 +33,7 @@ Required properties:
 Optional properties:
  - tx_delay: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
  - rx_delay: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default.
+ - phy-supply: phandle to a regulator if the PHY needs one
 
 Example:
 

arch/arm/boot/dts/rk3288-evb-rk808.dts

@@ -161,7 +161,7 @@ vcc_lcd: SWITCH_REG2 {
 };
 
 &gmac {
-	phy_regulator = "vcc_phy";
+	phy-supply = <&vcc_phy>;
 	phy-mode = "rgmii";
 	clock_in_out = "input";
 	snps,reset-gpio = <&gpio4 7 0>;

arch/arm/boot/dts/rk3288-evb.dtsi

@@ -98,6 +98,8 @@ vcc_phy: vcc-phy-regulator {
 		pinctrl-names = "default";
 		pinctrl-0 = <&eth_phy_pwr>;
 		regulator-name = "vcc_phy";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 		regulator-boot-on;
 	};

drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c

@@ -32,7 +32,7 @@
 struct rk_priv_data {
 	struct platform_device *pdev;
 	int phy_iface;
-	char regulator[32];
+	struct regulator *regulator;
 
 	bool clk_enabled;
 	bool clock_input;
@@ -287,47 +287,25 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
 
 static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
 {
-	struct regulator *ldo;
-	char *ldostr = bsp_priv->regulator;
+	struct regulator *ldo = bsp_priv->regulator;
 	int ret;
 	struct device *dev = &bsp_priv->pdev->dev;
 
-	if (!ldostr) {
-		dev_err(dev, "%s: no ldo found\n", __func__);
+	if (!ldo) {
+		dev_err(dev, "%s: no regulator found\n", __func__);
 		return -1;
 	}
 
-	ldo = regulator_get(NULL, ldostr);
-	if (!ldo) {
-		dev_err(dev, "\n%s get ldo %s failed\n", __func__, ldostr);
-	} else {
 	if (enable) {
-			if (!regulator_is_enabled(ldo)) {
-				regulator_set_voltage(ldo, 3300000, 3300000);
 		ret = regulator_enable(ldo);
-				if (ret != 0)
-					dev_err(dev, "%s: fail to enable %s\n",
-						__func__, ldostr);
-				else
-					dev_info(dev, "turn on ldo done.\n");
-			} else {
-				dev_warn(dev, "%s is enabled before enable",
-					 ldostr);
-			}
+		if (ret)
+			dev_err(dev, "%s: fail to enable phy-supply\n",
+				__func__);
 	} else {
-			if (regulator_is_enabled(ldo)) {
 		ret = regulator_disable(ldo);
-				if (ret != 0)
-					dev_err(dev, "%s: fail to disable %s\n",
-						__func__, ldostr);
-				else
-					dev_info(dev, "turn off ldo done.\n");
-			} else {
-				dev_warn(dev, "%s is disabled before disable",
-					 ldostr);
-			}
-		}
-		regulator_put(ldo);
+		if (ret)
+			dev_err(dev, "%s: fail to disable phy-supply\n",
+				__func__);
 	}
 
 	return 0;
@@ -347,14 +325,14 @@ static void *rk_gmac_setup(struct platform_device *pdev)
 
 	bsp_priv->phy_iface = of_get_phy_mode(dev->of_node);
 
-	ret = of_property_read_string(dev->of_node, "phy_regulator", &strings);
-	if (ret) {
-		dev_warn(dev, "%s: Can not read property: phy_regulator.\n",
-			 __func__);
-	} else {
-		dev_info(dev, "%s: PHY power controlled by regulator(%s).\n",
-			 __func__, strings);
-		strcpy(bsp_priv->regulator, strings);
+	bsp_priv->regulator = devm_regulator_get_optional(dev, "phy");
+	if (IS_ERR(bsp_priv->regulator)) {
+		if (PTR_ERR(bsp_priv->regulator) == -EPROBE_DEFER) {
+			dev_err(dev, "phy regulator is not available yet, deferred probing\n");
+			return ERR_PTR(-EPROBE_DEFER);
+		}
+		dev_err(dev, "no regulator found\n");
+		bsp_priv->regulator = NULL;
 	}
 
 	ret = of_property_read_string(dev->of_node, "clock_in_out", &strings);