Merge tag 'omap-for-v4.4/cleanup-pt1' of...

Merge tag 'omap-for-v4.4/cleanup-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

Merge "Clean-up for omaps for v4.4 merge window" from Tony Lindgren:

- Remove legacy omap3 ISP code as the driver is DT only

- Remove VoiceBlue board support as it's been unused over
  10 years now

- Remove unused polarity control macros for TWL

- Remove two unneeded semicolons

- Remove unused core dpll code for reprogramming the rates

Note that this branch is against v4.3-rc4 as that contains critical
MMC related fixes to boot with MMC working on most omaps.

* tag 'omap-for-v4.4/cleanup-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP3: clock: remove un-used core dpll re-program code
  ARM: OMAP2+: Remove unneeded semicolons
  ARM: OMAP3: vc: Remove unused macros
  ARM: OMAP1: Remove board support for VoiceBlue board
  ARM: OMAP2+: Remove legacy OMAP3 ISP instantiation

arch/arm/mach-omap1/Kconfig

@@ -90,13 +90,6 @@ config MACH_OMAP_FSAMPLE
 	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
 	  a board.
 
-config MACH_VOICEBLUE
-	bool "Voiceblue"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
-	help
-	  Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
-	  such a board.
-
 config MACH_OMAP_PALMTE
 	bool "Palm Tungsten E"
 	depends on ARCH_OMAP1 && ARCH_OMAP15XX

arch/arm/mach-omap1/Makefile

@@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o board-nand.o
 obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
 obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o \
 					   board-nand.o
-obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
 obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
 obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o

arch/arm/mach-omap1/board-voiceblue.c

-/*
- * linux/arch/arm/mach-omap1/board-voiceblue.c
- *
- * Modified from board-generic.c
- *
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mtd/physmap.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/smc91x.h>
-#include <linux/export.h>
-#include <linux/reboot.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/board-voiceblue.h>
-#include <mach/flash.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
-#include "common.h"
-
-static struct plat_serial8250_port voiceblue_ports[] = {
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x40000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x50000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x60000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x70000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM1,
-};
-
-static int __init ext_uart_init(void)
-{
-	if (!machine_is_voiceblue())
-		return -ENODEV;
-
-	voiceblue_ports[0].irq = gpio_to_irq(12);
-	voiceblue_ports[1].irq = gpio_to_irq(13);
-	voiceblue_ports[2].irq = gpio_to_irq(14);
-	voiceblue_ports[3].irq = gpio_to_irq(15);
-	serial_device.dev.platform_data = voiceblue_ports;
-	return platform_device_register(&serial_device);
-}
-arch_initcall(ext_uart_init);
-
-static struct physmap_flash_data voiceblue_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-};
-
-static struct resource voiceblue_flash_resource = {
-	.start	= OMAP_CS0_PHYS,
-	.end	= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device voiceblue_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &voiceblue_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &voiceblue_flash_resource,
-};
-
-static struct smc91x_platdata voiceblue_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource voiceblue_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP_CS2_PHYS + 0x300,
-		.end	= OMAP_CS2_PHYS + 0x300 + 16,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device voiceblue_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &voiceblue_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(voiceblue_smc91x_resources),
-	.resource	= voiceblue_smc91x_resources,
-};
-
-static struct platform_device *voiceblue_devices[] __initdata = {
-	&voiceblue_flash_device,
-	&voiceblue_smc91x_device,
-};
-
-static struct omap_usb_config voiceblue_usb_config __initdata = {
-	.hmc_mode	= 3,
-	.register_host	= 1,
-	.register_dev   = 1,
-	.pins[0]	= 2,
-	.pins[1]	= 6,
-	.pins[2]	= 6,
-};
-
-#define MACHINE_PANICED		1
-#define MACHINE_REBOOTING	2
-#define MACHINE_REBOOT		4
-static unsigned long machine_state;
-
-static int panic_event(struct notifier_block *this, unsigned long event,
-	 void *ptr)
-{
-	if (test_and_set_bit(MACHINE_PANICED, &machine_state))
-		return NOTIFY_DONE;
-
-	/* Flash power LED */
-	omap_writeb(0x78, OMAP_LPG1_LCR);
-	omap_writeb(0x01, OMAP_LPG1_PMR);	/* Enable clock */
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block panic_block = {
-	.notifier_call	= panic_event,
-};
-
-static int __init voiceblue_setup(void)
-{
-	if (!machine_is_voiceblue())
-		return -ENODEV;
-
-	/* Setup panic notifier */
-	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
-
-	return 0;
-}
-postcore_initcall(voiceblue_setup);
-
-static int wdt_gpio_state;
-
-void voiceblue_wdt_enable(void)
-{
-	gpio_direction_output(0, 0);
-	gpio_set_value(0, 1);
-	gpio_set_value(0, 0);
-	wdt_gpio_state = 0;
-}
-
-void voiceblue_wdt_disable(void)
-{
-	gpio_set_value(0, 0);
-	gpio_set_value(0, 1);
-	gpio_set_value(0, 0);
-	gpio_direction_input(0);
-}
-
-void voiceblue_wdt_ping(void)
-{
-	if (test_bit(MACHINE_REBOOT, &machine_state))
-		return;
-
-	wdt_gpio_state = !wdt_gpio_state;
-	gpio_set_value(0, wdt_gpio_state);
-}
-
-static void voiceblue_restart(enum reboot_mode mode, const char *cmd)
-{
-	/*
-	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
-	 * "Global Software Reset Affects Traffic Controller Frequency".
-	 */
-	if (cpu_is_omap5912()) {
-		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
-		omap_writew(0x8, ARM_RSTCT1);
-	}
-
-	set_bit(MACHINE_REBOOT, &machine_state);
-	voiceblue_wdt_enable();
-	while (1) ;
-}
-
-EXPORT_SYMBOL(voiceblue_wdt_enable);
-EXPORT_SYMBOL(voiceblue_wdt_disable);
-EXPORT_SYMBOL(voiceblue_wdt_ping);
-
-static void __init voiceblue_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	/* Watchdog */
-	gpio_request(0, "Watchdog");
-	/* smc91x reset */
-	gpio_request(7, "SMC91x reset");
-	gpio_direction_output(7, 1);
-	udelay(2);	/* wait at least 100ns */
-	gpio_set_value(7, 0);
-	mdelay(50);	/* 50ms until PHY ready */
-	/* smc91x interrupt pin */
-	gpio_request(8, "SMC91x irq");
-	/* 16C554 reset*/
-	gpio_request(6, "16C554 reset");
-	gpio_direction_output(6, 0);
-	/* 16C554 interrupt pins */
-	gpio_request(12, "16C554 irq");
-	gpio_request(13, "16C554 irq");
-	gpio_request(14, "16C554 irq");
-	gpio_request(15, "16C554 irq");
-	irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
-
-	voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
-	voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
-	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
-	omap_serial_init();
-	omap1_usb_init(&voiceblue_usb_config);
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	/* There is a good chance board is going up, so enable power LED
-	 * (it is connected through invertor) */
-	omap_writeb(0x00, OMAP_LPG1_LCR);
-	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
-}
-
-MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
-	/* Maintainer: Ladislav Michl <michl@2n.cz> */
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= voiceblue_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= voiceblue_restart,
-MACHINE_END

arch/arm/mach-omap1/include/mach/board-voiceblue.h

-/*
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Hardware definitions for OMAP5910 based VoiceBlue board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VOICEBLUE_H
-#define __ASM_ARCH_VOICEBLUE_H
-
-extern void voiceblue_wdt_enable(void);
-extern void voiceblue_wdt_disable(void);
-extern void voiceblue_wdt_ping(void);
-
-#endif /*  __ASM_ARCH_VOICEBLUE_H */
-

arch/arm/mach-omap2/Makefile

@@ -48,11 +48,9 @@ AFLAGS_sleep44xx.o			:=-Wa,-march=armv7-a$(plus_sec)
 # Functions loaded to SRAM
 obj-$(CONFIG_SOC_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_SOC_OMAP2430)		+= sram243x.o
-obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
 AFLAGS_sram242x.o			:=-Wa,-march=armv6
 AFLAGS_sram243x.o			:=-Wa,-march=armv6
-AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 
 # Restart code (OMAP4/5 currently in omap4-common.c)
 obj-$(CONFIG_SOC_OMAP2420)		+= omap2-restart.o
@@ -186,7 +184,6 @@ obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpllcore.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_virt_prcm_set.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpll.o
 obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common)
-obj-$(CONFIG_ARCH_OMAP3)		+= clkt34xx_dpll3m2.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)

arch/arm/mach-omap2/clkt34xx_dpll3m2.c

-/*
- * OMAP34xx M2 divider clock code
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock3xxx.h"
-#include "sdrc.h"
-#include "sram.h"
-
-#define CYCLES_PER_MHZ			1000000
-
-struct clk *sdrc_ick_p, *arm_fck_p;
-
-/*
- * CORE DPLL (DPLL3) M2 divider rate programming functions
- *
- * These call into SRAM code to do the actual CM writes, since the SDRAM
- * is clocked from DPLL3.
- */
-
-/**
- * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Program the DPLL M2 divider with the rounded target rate.  Returns
- * -EINVAL upon error, or 0 upon success.
- */
-int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
-					unsigned long parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	u32 new_div = 0;
-	u32 unlock_dll = 0;
-	u32 c;
-	unsigned long validrate, sdrcrate, _mpurate;
-	struct omap_sdrc_params *sdrc_cs0;
-	struct omap_sdrc_params *sdrc_cs1;
-	int ret;
-	unsigned long clkrate;
-
-	if (!clk || !rate)
-		return -EINVAL;
-
-	new_div = DIV_ROUND_UP(parent_rate, rate);
-	validrate = parent_rate / new_div;
-
-	if (validrate != rate)
-		return -EINVAL;
-
-	sdrcrate = clk_get_rate(sdrc_ick_p);
-	clkrate = clk_hw_get_rate(hw);
-	if (rate > clkrate)
-		sdrcrate <<= ((rate / clkrate) >> 1);
-	else
-		sdrcrate >>= ((clkrate / rate) >> 1);
-
-	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
-	if (ret)
-		return -EINVAL;
-
-	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
-		pr_debug("clock: will unlock SDRC DLL\n");
-		unlock_dll = 1;
-	}
-
-	/*
-	 * XXX This only needs to be done when the CPU frequency changes
-	 */
-	_mpurate = clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ;
-	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
-	c += 1;  /* for safety */
-	c *= SDRC_MPURATE_LOOPS;
-	c >>= SDRC_MPURATE_SCALE;
-	if (c == 0)
-		c = 1;
-
-	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n",
-		 clkrate, validrate);
-	pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
-	if (sdrc_cs1)
-		pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-			 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-			 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-
-	if (sdrc_cs1)
-		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clkrate,
-				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
-				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-	else
-		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clkrate,
-				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
-				  0, 0, 0, 0);
-	return 0;
-}
-

arch/arm/mach-omap2/devices.c

@@ -33,7 +33,6 @@
 #include "common.h"
 #include "mux.h"
 #include "control.h"
-#include "devices.h"
 #include "display.h"
 
 #define L3_MODULES_MAX_LEN 12
@@ -67,58 +66,6 @@ static int __init omap3_l3_init(void)
 }
 omap_postcore_initcall(omap3_l3_init);
 
-#if defined(CONFIG_IOMMU_API)
-
-#include <linux/platform_data/iommu-omap.h>
-
-static struct resource omap3isp_resources[] = {
-	{
-		.start		= OMAP3430_ISP_BASE,
-		.end		= OMAP3430_ISP_BASE + 0x12fc,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3430_ISP_BASE2,
-		.end		= OMAP3430_ISP_BASE2 + 0x0600,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 24 + OMAP_INTC_START,
-		.flags		= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device omap3isp_device = {
-	.name		= "omap3isp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(omap3isp_resources),
-	.resource	= omap3isp_resources,
-};
-
-static struct omap_iommu_arch_data omap3_isp_iommu = {
-	.name = "mmu_isp",
-};
-
-int omap3_init_camera(struct isp_platform_data *pdata)
-{
-	if (of_have_populated_dt())
-		omap3_isp_iommu.name = "480bd400.mmu";
-
-	omap3isp_device.dev.platform_data = pdata;
-	omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu;
-
-	return platform_device_register(&omap3isp_device);
-}
-
-#else /* !CONFIG_IOMMU_API */
-
-int omap3_init_camera(struct isp_platform_data *pdata)
-{
-	return 0;
-}
-
-#endif
-
 #if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
 static inline void __init omap_init_mbox(void)
 {

arch/arm/mach-omap2/devices.h

-/*
- * arch/arm/mach-omap2/devices.h
- *
- * OMAP2 platform device setup/initialization
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_DEVICES_H
-#define __ARCH_ARM_MACH_OMAP_DEVICES_H
-
-struct isp_platform_data;
-
-int omap3_init_camera(struct isp_platform_data *pdata);
-
-#endif

arch/arm/mach-omap2/pm44xx.c

@@ -210,7 +210,7 @@ static inline int omap4plus_init_static_deps(const struct static_dep_map *map)
 		}
 
 		map++;
-	};
+	}
 
 	return 0;
 }

arch/arm/mach-omap2/powerdomains3xxx_data.c

@@ -582,7 +582,7 @@ void __init omap3xxx_powerdomains_init(void)
 
 	/* Only 81xx needs custom pwrdm_operations */
 	if (!cpu_is_ti81xx())
-		pwrdm_register_platform_funcs(&omap3_pwrdm_operations);;
+		pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
 
 	rev = omap_rev();
 

arch/arm/mach-omap2/sram.c

@@ -211,35 +211,10 @@ static inline int omap243x_sram_init(void)
 
 #ifdef CONFIG_ARCH_OMAP3
 
-static u32 (*_omap3_sram_configure_core_dpll)(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-
-u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
-{
-	BUG_ON(!_omap3_sram_configure_core_dpll);
-	return _omap3_sram_configure_core_dpll(
-			m2, unlock_dll, f, inc,
-			sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
-			sdrc_actim_ctrl_b_0, sdrc_mr_0,
-			sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
-			sdrc_actim_ctrl_b_1, sdrc_mr_1);
-}
-
 void omap3_sram_restore_context(void)
 {
 	omap_sram_reset();
 
-	_omap3_sram_configure_core_dpll =
-		omap_sram_push(omap3_sram_configure_core_dpll,
-			       omap3_sram_configure_core_dpll_sz);
 	omap_push_sram_idle();
 }
 

arch/arm/mach-omap2/sram.h

@@ -15,12 +15,6 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 				      u32 mem_type);
 extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
-extern u32 omap3_configure_core_dpll(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
 extern void omap3_sram_restore_context(void);
 
 /* Do not use these */
@@ -52,14 +46,6 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 						u32 mem_type);
 extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
-extern u32 omap3_sram_configure_core_dpll(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-
 #ifdef CONFIG_PM
 extern void omap_push_sram_idle(void);
 #else

arch/arm/mach-omap2/sram34xx.S

-/*
- * linux/arch/arm/mach-omap3/sram.S
- *
- * Omap3 specific functions that need to be run in internal SRAM
- *
- * Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
- *
- * Rajendra Nayak <rnayak@ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "sdrc.h"
-#include "cm3xxx.h"
-
-/*
- * This file needs be built unconditionally as ARM to interoperate correctly
- * with non-Thumb-2-capable firmware.
- */
-	.arm
-
-	.text
-
-/* r1 parameters */
-#define SDRC_NO_UNLOCK_DLL		0x0
-#define SDRC_UNLOCK_DLL			0x1
-
-/* SDRC_DLLA_CTRL bit settings */
-#define FIXEDDELAY_SHIFT		24
-#define FIXEDDELAY_MASK			(0xff << FIXEDDELAY_SHIFT)
-#define DLLIDLE_MASK			0x4
-
-/*
- * SDRC_DLLA_CTRL default values: TI hardware team indicates that
- * FIXEDDELAY should be initialized to 0xf.  This apparently was
- * empirically determined during process testing, so no derivation
- * was provided.
- */
-#define FIXEDDELAY_DEFAULT		(0x0f << FIXEDDELAY_SHIFT)
-
-/* SDRC_DLLA_STATUS bit settings */
-#define LOCKSTATUS_MASK			0x4
-
-/* SDRC_POWER bit settings */
-#define SRFRONIDLEREQ_MASK		0x40
-
-/* CM_IDLEST1_CORE bit settings */
-#define ST_SDRC_MASK			0x2
-
-/* CM_ICLKEN1_CORE bit settings */
-#define EN_SDRC_MASK			0x2
-
-/* CM_CLKSEL1_PLL bit settings */
-#define CORE_DPLL_CLKOUT_DIV_SHIFT	0x1b
-
-/*
- * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
- *
- * Params passed in registers:
- *  r0 = new M2 divider setting (only 1 and 2 supported right now)
- *  r1 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
- *      SDRC rates < 83MHz
- *  r2 = number of MPU cycles to wait for SDRC to stabilize after
- *      reprogramming the SDRC when switching to a slower MPU speed
- *  r3 = increasing SDRC rate? (1 = yes, 0 = no)
- *
- * Params passed via the stack. The needed params will be copied in SRAM
- *  before use by the code in SRAM (SDRAM is not accessible during SDRC
- *  reconfiguration):
- *  new SDRC_RFR_CTRL_0 register contents
- *  new SDRC_ACTIM_CTRL_A_0 register contents
- *  new SDRC_ACTIM_CTRL_B_0 register contents
- *  new SDRC_MR_0 register value
- *  new SDRC_RFR_CTRL_1 register contents
- *  new SDRC_ACTIM_CTRL_A_1 register contents
- *  new SDRC_ACTIM_CTRL_B_1 register contents
- *  new SDRC_MR_1 register value
- *
- * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into
- * the SDRC CS1 registers
- *
- * NOTE: This code no longer attempts to program the SDRC AC timing and MR
- * registers.  This is because the code currently cannot ensure that all
- * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the
- * SDRAM when the registers are written.  If the registers are changed while
- * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC
- * may enter an unpredictable state.  In the future, the intent is to
- * re-enable this code in cases where we can ensure that no initiators are
- * touching the SDRAM.  Until that time, users who know that their use case
- * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING
- * option.
- *
- * Richard Woodruff notes that any changes to this code must be carefully
- * audited and tested to ensure that they don't cause a TLB miss while
- * the SDRAM is inaccessible.  Such a situation will crash the system
- * since it will cause the ARM MMU to attempt to walk the page tables.
- * These crashes may be intermittent.
- */
-	.align	3
-ENTRY(omap3_sram_configure_core_dpll)
-	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
-
-					@ pull the extra args off the stack
-					@  and store them in SRAM
-
-/*
- * PC-relative stores are deprecated in ARMv7 and lead to undefined behaviour
- * in Thumb-2: use a r7 as a base instead.
- * Be careful not to clobber r7 when maintaing this file.
- */
- THUMB(	adr	r7, omap3_sram_configure_core_dpll			)
-	.macro strtext Rt:req, label:req
- ARM(	str	\Rt, \label						)
- THUMB(	str	\Rt, [r7, \label - omap3_sram_configure_core_dpll]	)
-	.endm
-
-	ldr	r4, [sp, #52]
-	strtext	r4, omap_sdrc_rfr_ctrl_0_val
-	ldr	r4, [sp, #56]
-	strtext	r4, omap_sdrc_actim_ctrl_a_0_val
-	ldr	r4, [sp, #60]
-	strtext	r4, omap_sdrc_actim_ctrl_b_0_val
-	ldr	r4, [sp, #64]
-	strtext	r4, omap_sdrc_mr_0_val
-	ldr	r4, [sp, #68]
-	strtext	r4, omap_sdrc_rfr_ctrl_1_val
-	cmp	r4, #0			@ if SDRC_RFR_CTRL_1 is 0,
-	beq	skip_cs1_params		@  do not use cs1 params
-	ldr	r4, [sp, #72]
-	strtext	r4, omap_sdrc_actim_ctrl_a_1_val
-	ldr	r4, [sp, #76]
-	strtext	r4, omap_sdrc_actim_ctrl_b_1_val
-	ldr	r4, [sp, #80]
-	strtext	r4, omap_sdrc_mr_1_val
-skip_cs1_params:
-	mrc	p15, 0, r8, c1, c0, 0	@ read ctrl register
-	bic	r10, r8, #0x800		@ clear Z-bit, disable branch prediction
-	mcr	p15, 0, r10, c1, c0, 0	@ write ctrl register
-	dsb				@ flush buffered writes to interconnect
-	isb				@ prevent speculative exec past here
-	cmp	r3, #1			@ if increasing SDRC clk rate,
-	bleq	configure_sdrc		@ program the SDRC regs early (for RFR)
-	cmp	r1, #SDRC_UNLOCK_DLL	@ set the intended DLL state
-	bleq	unlock_dll
-	blne	lock_dll
-	bl	sdram_in_selfrefresh	@ put SDRAM in self refresh, idle SDRC
-	bl 	configure_core_dpll	@ change the DPLL3 M2 divider
-	mov	r12, r2
-	bl	wait_clk_stable		@ wait for SDRC to stabilize
-	bl	enable_sdrc		@ take SDRC out of idle
-	cmp	r1, #SDRC_UNLOCK_DLL	@ wait for DLL status to change
-	bleq	wait_dll_unlock
-	blne	wait_dll_lock
-	cmp	r3, #1			@ if increasing SDRC clk rate,
-	beq	return_to_sdram		@ return to SDRAM code, otherwise,
-	bl	configure_sdrc		@ reprogram SDRC regs now
-return_to_sdram:
-	mcr	p15, 0, r8, c1, c0, 0	@ restore ctrl register
-	isb				@ prevent speculative exec past here
-	mov 	r0, #0 			@ return value
-	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
-unlock_dll:
-	ldr	r11, omap3_sdrc_dlla_ctrl
-	ldr	r12, [r11]
-	bic	r12, r12, #FIXEDDELAY_MASK
-	orr	r12, r12, #FIXEDDELAY_DEFAULT
-	orr	r12, r12, #DLLIDLE_MASK
-	str	r12, [r11]		@ (no OCP barrier needed)
-	bx	lr
-lock_dll:
-	ldr	r11, omap3_sdrc_dlla_ctrl
-	ldr	r12, [r11]
-	bic	r12, r12, #DLLIDLE_MASK
-	str	r12, [r11]		@ (no OCP barrier needed)
-	bx	lr
-sdram_in_selfrefresh:
-	ldr	r11, omap3_sdrc_power	@ read the SDRC_POWER register
-	ldr	r12, [r11]		@ read the contents of SDRC_POWER
-	mov	r9, r12			@ keep a copy of SDRC_POWER bits
-	orr 	r12, r12, #SRFRONIDLEREQ_MASK	@ enable self refresh on idle
-	str 	r12, [r11]		@ write back to SDRC_POWER register
-	ldr	r12, [r11]		@ posted-write barrier for SDRC
-idle_sdrc:
-	ldr	r11, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
-	ldr	r12, [r11]
-	bic	r12, r12, #EN_SDRC_MASK		@ disable iclk bit for SDRC
-	str 	r12, [r11]
-wait_sdrc_idle:
-	ldr 	r11, omap3_cm_idlest1_core
-	ldr 	r12, [r11]
-	and 	r12, r12, #ST_SDRC_MASK		@ check for SDRC idle
-	cmp 	r12, #ST_SDRC_MASK
-	bne 	wait_sdrc_idle
-	bx 	lr
-configure_core_dpll:
-	ldr 	r11, omap3_cm_clksel1_pll
-	ldr	r12, [r11]
-	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
-	and	r12, r12, r10
-	orr	r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
-	str	r12, [r11]
-	ldr	r12, [r11]		@ posted-write barrier for CM
-	bx	lr
-wait_clk_stable:
-	subs 	r12, r12, #1
-	bne	wait_clk_stable
-	bx	lr
-enable_sdrc:
-	ldr 	r11, omap3_cm_iclken1_core
-	ldr	r12, [r11]
-	orr 	r12, r12, #EN_SDRC_MASK		@ enable iclk bit for SDRC
-	str 	r12, [r11]
-wait_sdrc_idle1:
-	ldr 	r11, omap3_cm_idlest1_core
-	ldr	r12, [r11]
-	and 	r12, r12, #ST_SDRC_MASK
-	cmp	r12, #0
-	bne	wait_sdrc_idle1
-restore_sdrc_power_val:
-	ldr	r11, omap3_sdrc_power
-	str	r9, [r11]		@ restore SDRC_POWER, no barrier needed
-	bx	lr
-wait_dll_lock:
-	ldr	r11, omap3_sdrc_dlla_status
-	ldr	r12, [r11]
-	and 	r12, r12, #LOCKSTATUS_MASK
-	cmp	r12, #LOCKSTATUS_MASK
-	bne	wait_dll_lock
-	bx	lr
-wait_dll_unlock:
-	ldr	r11, omap3_sdrc_dlla_status
-	ldr	r12, [r11]
-	and	r12, r12, #LOCKSTATUS_MASK
-	cmp	r12, #0x0
-	bne	wait_dll_unlock
-	bx	lr
-configure_sdrc:
-	ldr	r12, omap_sdrc_rfr_ctrl_0_val	@ fetch value from SRAM
-	ldr	r11, omap3_sdrc_rfr_ctrl_0	@ fetch addr from SRAM
-	str	r12, [r11]			@ store
-#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
-	ldr	r12, omap_sdrc_actim_ctrl_a_0_val
-	ldr	r11, omap3_sdrc_actim_ctrl_a_0
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_actim_ctrl_b_0_val
-	ldr	r11, omap3_sdrc_actim_ctrl_b_0
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_mr_0_val
-	ldr	r11, omap3_sdrc_mr_0
-	str	r12, [r11]
-#endif
-	ldr	r12, omap_sdrc_rfr_ctrl_1_val
-	cmp	r12, #0			@ if SDRC_RFR_CTRL_1 is 0,
-	beq	skip_cs1_prog		@  do not program cs1 params
-	ldr	r11, omap3_sdrc_rfr_ctrl_1
-	str	r12, [r11]
-#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
-	ldr	r12, omap_sdrc_actim_ctrl_a_1_val
-	ldr	r11, omap3_sdrc_actim_ctrl_a_1
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_actim_ctrl_b_1_val
-	ldr	r11, omap3_sdrc_actim_ctrl_b_1
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_mr_1_val
-	ldr	r11, omap3_sdrc_mr_1
-	str	r12, [r11]
-#endif
-skip_cs1_prog:
-	ldr	r12, [r11]		@ posted-write barrier for SDRC
-	bx	lr
-
-	.align
-omap3_sdrc_power:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
-omap3_cm_clksel1_pll:
-	.word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
-omap3_cm_idlest1_core:
-	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
-omap3_cm_iclken1_core:
-	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-
-omap3_sdrc_rfr_ctrl_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_rfr_ctrl_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
-omap3_sdrc_actim_ctrl_a_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrl_a_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
-omap3_sdrc_actim_ctrl_b_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
-omap3_sdrc_actim_ctrl_b_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
-omap3_sdrc_mr_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
-omap3_sdrc_mr_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
-omap_sdrc_rfr_ctrl_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_rfr_ctrl_1_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_a_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_a_1_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_b_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_b_1_val:
-	.word 0xDEADBEEF
-omap_sdrc_mr_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_mr_1_val:
-	.word 0xDEADBEEF
-
-omap3_sdrc_dlla_status:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
-omap3_sdrc_dlla_ctrl:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
-core_m2_mask_val:
-	.word 0x07FFFFFF
-ENDPROC(omap3_sram_configure_core_dpll)
-
-ENTRY(omap3_sram_configure_core_dpll_sz)
-	.word	. - omap3_sram_configure_core_dpll
-

arch/arm/mach-omap2/vc.c

@@ -280,10 +280,6 @@ void omap3_vc_set_pmic_signaling(int core_next_state)
 	}
 }
 
-#define PRM_POLCTRL_TWL_MASK	(OMAP3430_PRM_POLCTRL_CLKREQ_POL | \
-					OMAP3430_PRM_POLCTRL_CLKREQ_POL)
-#define PRM_POLCTRL_TWL_VAL	OMAP3430_PRM_POLCTRL_CLKREQ_POL
-
 /*
  * Configure signal polarity for sys_clkreq and sys_off_mode pins
  * as the default values are wrong and can cause the system to hang