ARM: tegra: Remove USB platform data

USB-related platform data is not used anymore in the Tegra USB drivers,
so remove all of it.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

arch/arm/mach-tegra/tegra.c

@@ -29,7 +29,6 @@
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <linux/pda_power.h>
-#include <linux/platform_data/tegra_usb.h>
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/sys_soc.h>
@@ -46,40 +45,6 @@
 #include "fuse.h"
 #include "iomap.h"
 
-static struct tegra_ehci_platform_data tegra_ehci1_pdata = {
-	.operating_mode = TEGRA_USB_OTG,
-	.power_down_on_bus_suspend = 1,
-	.vbus_gpio = -1,
-};
-
-static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
-	.reset_gpio = -1,
-	.clk = "cdev2",
-};
-
-static struct tegra_ehci_platform_data tegra_ehci2_pdata = {
-	.phy_config = &tegra_ehci2_ulpi_phy_config,
-	.operating_mode = TEGRA_USB_HOST,
-	.power_down_on_bus_suspend = 1,
-	.vbus_gpio = -1,
-};
-
-static struct tegra_ehci_platform_data tegra_ehci3_pdata = {
-	.operating_mode = TEGRA_USB_HOST,
-	.power_down_on_bus_suspend = 1,
-	.vbus_gpio = -1,
-};
-
-static struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5000000, "tegra-ehci.0",
-		       &tegra_ehci1_pdata),
-	OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5004000, "tegra-ehci.1",
-		       &tegra_ehci2_pdata),
-	OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5008000, "tegra-ehci.2",
-		       &tegra_ehci3_pdata),
-	{}
-};
-
 static void __init tegra_dt_init(void)
 {
 	struct soc_device_attribute *soc_dev_attr;
@@ -112,8 +77,7 @@ static void __init tegra_dt_init(void)
 	 * devices
 	 */
 out:
-	of_platform_populate(NULL, of_default_bus_match_table,
-				tegra20_auxdata_lookup, parent);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 }
 
 static void __init trimslice_init(void)

include/linux/platform_data/tegra_usb.h

-/*
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _TEGRA_USB_H_
-#define _TEGRA_USB_H_
-
-enum tegra_usb_operating_modes {
-	TEGRA_USB_DEVICE,
-	TEGRA_USB_HOST,
-	TEGRA_USB_OTG,
-};
-
-struct tegra_ehci_platform_data {
-	enum tegra_usb_operating_modes operating_mode;
-	/* power down the phy on bus suspend */
-	int power_down_on_bus_suspend;
-	void *phy_config;
-	int vbus_gpio;
-};
-
-#endif /* _TEGRA_USB_H_ */

include/linux/usb/tegra_usb_phy.h

@@ -28,11 +28,6 @@ struct tegra_utmip_config {
 	u8 xcvr_lsrslew;
 };
 
-struct tegra_ulpi_config {
-	int reset_gpio;
-	const char *clk;
-};
-
 enum tegra_usb_phy_port_speed {
 	TEGRA_USB_PHY_PORT_SPEED_FULL = 0,
 	TEGRA_USB_PHY_PORT_SPEED_LOW,