staging: comedi: ni_mio_common.c: remove interrupt_pin() macros

Pass the 'interrupt_pin' to ni_E_init() and remove the macros.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/ni_atmio.c

@@ -264,8 +264,6 @@ static const int ni_irqpin[] = {
 	-1, -1, -1, 0, 1, 2, -1, 3, -1, -1, 4, 5, 6, -1, -1, 7
 };
 
-#define interrupt_pin(a)	(ni_irqpin[(a)])
-
 #define IRQ_POLARITY 0
 
 #define NI_E_IRQ_FLAGS		0
@@ -406,7 +404,7 @@ static int ni_atmio_attach(struct comedi_device *dev,
 
 	/* generic E series stuff in ni_mio_common.c */
 
-	ret = ni_E_init(dev);
+	ret = ni_E_init(dev, ni_irqpin[dev->irq]);
 	if (ret < 0)
 		return ret;
 

drivers/staging/comedi/drivers/ni_mio_common.c

@@ -5604,7 +5604,7 @@ static int ni_alloc_private(struct comedi_device *dev)
 	return 0;
 }
 
-static int ni_E_init(struct comedi_device *dev)
+static int ni_E_init(struct comedi_device *dev, unsigned interrupt_pin)
 {
 	const struct ni_board_struct *board = comedi_board(dev);
 	struct ni_private *devpriv = dev->private;
@@ -5908,8 +5908,8 @@ static int ni_E_init(struct comedi_device *dev)
 			      (IRQ_POLARITY ? Interrupt_Output_Polarity : 0) |
 			      (Interrupt_Output_On_3_Pins & 0) |
 			      Interrupt_A_Enable | Interrupt_B_Enable |
-			      Interrupt_A_Output_Select(interrupt_pin(dev->irq)) |
-			      Interrupt_B_Output_Select(interrupt_pin(dev->irq)),
+			      Interrupt_A_Output_Select(interrupt_pin) |
+			      Interrupt_B_Output_Select(interrupt_pin),
 			      Interrupt_Control_Register);
 	}
 

drivers/staging/comedi/drivers/ni_mio_cs.c

@@ -137,8 +137,6 @@ static const struct ni_board_struct ni_boards[] = {
 #endif
 };
 
-#define interrupt_pin(a)	0
-
 #define IRQ_POLARITY 1
 
 #include "ni_mio_common.c"
@@ -205,7 +203,7 @@ static int mio_cs_auto_attach(struct comedi_device *dev,
 
 	devpriv = dev->private;
 
-	return ni_E_init(dev);
+	return ni_E_init(dev, 0);
 }
 
 static void mio_cs_detach(struct comedi_device *dev)

drivers/staging/comedi/drivers/ni_pcimio.c

@@ -1042,7 +1042,6 @@ static const struct ni_board_struct ni_boards[] = {
 	},
 };
 
-#define interrupt_pin(a)	0
 #define IRQ_POLARITY 1
 
 #define NI_E_IRQ_FLAGS		IRQF_SHARED
@@ -1274,7 +1273,7 @@ static int pcimio_auto_attach(struct comedi_device *dev,
 			dev->irq = irq;
 	}
 
-	ret = ni_E_init(dev);
+	ret = ni_E_init(dev, 0);
 	if (ret < 0)
 		return ret;