tg3: Fix SEEPROM accesses

The recent NVRAM patches sanitized how the driver deals with NVRAM
data, but they failed to bring the SEEPROM interfaces inline with
the new strategy.  This patch brings the SEEPROM interfaces up to date.
This patch also reverts commit 0d489ffb
("tg3: fix big endian MAC address collection failure").
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Tested-by: Robin Holt <holt@sgi.com>
Tested-by: James Bottomley <james.bottomley@HansenPartnership.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/tg3.c

@@ -2190,7 +2190,14 @@ static int tg3_nvram_read_using_eeprom(struct tg3 *tp,
 	if (!(tmp & EEPROM_ADDR_COMPLETE))
 		return -EBUSY;
 
-	*val = tr32(GRC_EEPROM_DATA);
+	tmp = tr32(GRC_EEPROM_DATA);
+
+	/*
+	 * The data will always be opposite the native endian
+	 * format.  Perform a blind byteswap to compensate.
+	 */
+	*val = swab32(tmp);
+
 	return 0;
 }
 
@@ -10663,7 +10670,13 @@ static int tg3_nvram_write_block_using_eeprom(struct tg3 *tp,
 
 		memcpy(&data, buf + i, 4);
 
-		tw32(GRC_EEPROM_DATA, be32_to_cpu(data));
+		/*
+		 * The SEEPROM interface expects the data to always be opposite
+		 * the native endian format.  We accomplish this by reversing
+		 * all the operations that would have been performed on the
+		 * data from a call to tg3_nvram_read_be32().
+		 */
+		tw32(GRC_EEPROM_DATA, swab32(be32_to_cpu(data)));
 
 		val = tr32(GRC_EEPROM_ADDR);
 		tw32(GRC_EEPROM_ADDR, val | EEPROM_ADDR_COMPLETE);
@@ -12443,13 +12456,8 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
 		/* Next, try NVRAM. */
 		if (!tg3_nvram_read_be32(tp, mac_offset + 0, &hi) &&
 		    !tg3_nvram_read_be32(tp, mac_offset + 4, &lo)) {
-			dev->dev_addr[0] = ((hi >> 16) & 0xff);
-			dev->dev_addr[1] = ((hi >> 24) & 0xff);
-			dev->dev_addr[2] = ((lo >>  0) & 0xff);
-			dev->dev_addr[3] = ((lo >>  8) & 0xff);
-			dev->dev_addr[4] = ((lo >> 16) & 0xff);
-			dev->dev_addr[5] = ((lo >> 24) & 0xff);
-
+			memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2);
+			memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo));
 		}
 		/* Finally just fetch it out of the MAC control regs. */
 		else {