net: dsa: don't enumerate dsa_switch and dsa_port bit fields using commas

This is a cosmetic incremental fixup to commits
7787ff77 ("net: dsa: merge all bools of struct dsa_switch into a single u32")
bde82f38 ("net: dsa: merge all bools of struct dsa_port into a single u8")

The desire to make this change was enunciated after posting these
patches here:
https://patchwork.kernel.org/project/netdevbpf/cover/20220105132141.2648876-1-vladimir.oltean@nxp.com/

but due to a slight timing overlap (message posted at 2:28 p.m. UTC,
merge commit is at 2:46 p.m. UTC), that comment was missed and the
changes were applied as-is.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

include/net/dsa.h

@@ -265,14 +265,16 @@ struct dsa_port {
 
 	u8			stp_state;
 
-	u8			vlan_filtering:1,
-				/* Managed by DSA on user ports and by
-				 * drivers on CPU and DSA ports
-				 */
-				learning:1,
-				lag_tx_enabled:1,
-				devlink_port_setup:1,
-				setup:1;
+	u8			vlan_filtering:1;
+
+	/* Managed by DSA on user ports and by drivers on CPU and DSA ports */
+	u8			learning:1;
+
+	u8			lag_tx_enabled:1;
+
+	u8			devlink_port_setup:1;
+
+	u8			setup:1;
 
 	struct device_node	*dn;
 	unsigned int		ageing_time;
@@ -331,56 +333,52 @@ struct dsa_switch {
 	struct dsa_switch_tree	*dst;
 	unsigned int		index;
 
-	u32			setup:1,
-				/* Disallow bridge core from requesting
-				 * different VLAN awareness settings on ports
-				 * if not hardware-supported
-				 */
-				vlan_filtering_is_global:1,
-				/* Keep VLAN filtering enabled on ports not
-				 * offloading any upper
+	u32			setup:1;
+
+	/* Disallow bridge core from requesting different VLAN awareness
+	 * settings on ports if not hardware-supported
 	 */
-				needs_standalone_vlan_filtering:1,
-				/* Pass .port_vlan_add and .port_vlan_del to
-				 * drivers even for bridges that have
-				 * vlan_filtering=0. All drivers should ideally
-				 * set this (and then the option would get
-				 * removed), but it is unknown whether this
+	u32			vlan_filtering_is_global:1;
+
+	/* Keep VLAN filtering enabled on ports not offloading any upper */
+	u32			needs_standalone_vlan_filtering:1;
+
+	/* Pass .port_vlan_add and .port_vlan_del to drivers even for bridges
+	 * that have vlan_filtering=0. All drivers should ideally set this (and
+	 * then the option would get removed), but it is unknown whether this
 	 * would break things or not.
 	 */
-				configure_vlan_while_not_filtering:1,
-				/* If the switch driver always programs the CPU
-				 * port as egress tagged despite the VLAN
-				 * configuration indicating otherwise, then
-				 * setting @untag_bridge_pvid will force the
-				 * DSA receive path to pop the bridge's
-				 * default_pvid VLAN tagged frames to offer a
-				 * consistent behavior between a
-				 * vlan_filtering=0 and vlan_filtering=1 bridge
+	u32			configure_vlan_while_not_filtering:1;
+
+	/* If the switch driver always programs the CPU port as egress tagged
+	 * despite the VLAN configuration indicating otherwise, then setting
+	 * @untag_bridge_pvid will force the DSA receive path to pop the
+	 * bridge's default_pvid VLAN tagged frames to offer a consistent
+	 * behavior between a vlan_filtering=0 and vlan_filtering=1 bridge
 	 * device.
 	 */
-				untag_bridge_pvid:1,
+	u32			untag_bridge_pvid:1;
+
 	/* Let DSA manage the FDB entries towards the
 	 * CPU, based on the software bridge database.
 	 */
-				assisted_learning_on_cpu_port:1,
-				/* In case vlan_filtering_is_global is set, the
-				 * VLAN awareness state should be retrieved
-				 * from here and not from the per-port
-				 * settings.
+	u32			assisted_learning_on_cpu_port:1;
+
+	/* In case vlan_filtering_is_global is set, the VLAN awareness state
+	 * should be retrieved from here and not from the per-port settings.
 	 */
-				vlan_filtering:1,
-				/* MAC PCS does not provide link state change
-				 * interrupt, and requires polling. Flag passed
-				 * on to PHYLINK.
+	u32			vlan_filtering:1;
+
+	/* MAC PCS does not provide link state change interrupt, and requires
+	 * polling. Flag passed on to PHYLINK.
 	 */
-				pcs_poll:1,
-				/* For switches that only have the MRU
-				 * configurable. To ensure the configured MTU
-				 * is not exceeded, normalization of MRU on all
-				 * bridged interfaces is needed.
+	u32			pcs_poll:1;
+
+	/* For switches that only have the MRU configurable. To ensure the
+	 * configured MTU is not exceeded, normalization of MRU on all bridged
+	 * interfaces is needed.
 	 */
-				mtu_enforcement_ingress:1;
+	u32			mtu_enforcement_ingress:1;
 
 	/* Listener for switch fabric events */
 	struct notifier_block	nb;