drm/gma500: Add support for SGX interrupts

Add 2D blit status and MMU fault interrupts to the IRQ handler.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>

drivers/gpu/drm/gma500/psb_irq.c

@@ -200,11 +200,64 @@ static void psb_vdc_interrupt(struct drm_device *dev, uint32_t vdc_stat)
 		mid_pipe_event_handler(dev, 1);
 }
 
+/*
+ * SGX interrupt handler
+ */
+static void psb_sgx_interrupt(struct drm_device *dev, u32 stat_1, u32 stat_2)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 val, addr;
+	int error = false;
+
+	if (stat_1 & _PSB_CE_TWOD_COMPLETE)
+		val = PSB_RSGX32(PSB_CR_2D_BLIT_STATUS);
+
+	if (stat_2 & _PSB_CE2_BIF_REQUESTER_FAULT) {
+		val = PSB_RSGX32(PSB_CR_BIF_INT_STAT);
+		addr = PSB_RSGX32(PSB_CR_BIF_FAULT);
+		if (val) {
+			if (val & _PSB_CBI_STAT_PF_N_RW)
+				DRM_ERROR("SGX MMU page fault:");
+			else
+				DRM_ERROR("SGX MMU read / write protection fault:");
+
+			if (val & _PSB_CBI_STAT_FAULT_CACHE)
+				DRM_ERROR("\tCache requestor");
+			if (val & _PSB_CBI_STAT_FAULT_TA)
+				DRM_ERROR("\tTA requestor");
+			if (val & _PSB_CBI_STAT_FAULT_VDM)
+				DRM_ERROR("\tVDM requestor");
+			if (val & _PSB_CBI_STAT_FAULT_2D)
+				DRM_ERROR("\t2D requestor");
+			if (val & _PSB_CBI_STAT_FAULT_PBE)
+				DRM_ERROR("\tPBE requestor");
+			if (val & _PSB_CBI_STAT_FAULT_TSP)
+				DRM_ERROR("\tTSP requestor");
+			if (val & _PSB_CBI_STAT_FAULT_ISP)
+				DRM_ERROR("\tISP requestor");
+			if (val & _PSB_CBI_STAT_FAULT_USSEPDS)
+				DRM_ERROR("\tUSSEPDS requestor");
+			if (val & _PSB_CBI_STAT_FAULT_HOST)
+				DRM_ERROR("\tHost requestor");
+
+			DRM_ERROR("\tMMU failing address is 0x%08x.\n",
+				  (unsigned int)addr);
+			error = true;
+		}
+	}
+
+	/* Clear bits */
+	PSB_WSGX32(stat_1, PSB_CR_EVENT_HOST_CLEAR);
+	PSB_WSGX32(stat_2, PSB_CR_EVENT_HOST_CLEAR2);
+	PSB_RSGX32(PSB_CR_EVENT_HOST_CLEAR2);
+}
+
 irqreturn_t psb_irq_handler(int irq, void *arg)
 {
 	struct drm_device *dev = arg;
 	struct drm_psb_private *dev_priv = dev->dev_private;
 	uint32_t vdc_stat, dsp_int = 0, sgx_int = 0, hotplug_int = 0;
+	u32 sgx_stat_1, sgx_stat_2;
 	int handled = 0;
 
 	spin_lock(&dev_priv->irqmask_lock);
@@ -233,14 +286,9 @@ irqreturn_t psb_irq_handler(int irq, void *arg)
 	}
 
 	if (sgx_int) {
-		/* Not expected - we have it masked, shut it up */
-		u32 s, s2;
-		s = PSB_RSGX32(PSB_CR_EVENT_STATUS);
-		s2 = PSB_RSGX32(PSB_CR_EVENT_STATUS2);
-		PSB_WSGX32(s, PSB_CR_EVENT_HOST_CLEAR);
-		PSB_WSGX32(s2, PSB_CR_EVENT_HOST_CLEAR2);
-		/* if s & _PSB_CE_TWOD_COMPLETE we have 2D done but
-		   we may as well poll even if we add that ! */
+		sgx_stat_1 = PSB_RSGX32(PSB_CR_EVENT_STATUS);
+		sgx_stat_2 = PSB_RSGX32(PSB_CR_EVENT_STATUS2);
+		psb_sgx_interrupt(dev, sgx_stat_1, sgx_stat_2);
 		handled = 1;
 	}
 
@@ -269,8 +317,13 @@ void psb_irq_preinstall(struct drm_device *dev)
 
 	spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
 
-	if (gma_power_is_on(dev))
+	if (gma_power_is_on(dev)) {
 		PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM);
+		PSB_WVDC32(0x00000000, PSB_INT_MASK_R);
+		PSB_WVDC32(0x00000000, PSB_INT_ENABLE_R);
+		PSB_WSGX32(0x00000000, PSB_CR_EVENT_HOST_ENABLE);
+		PSB_RSGX32(PSB_CR_EVENT_HOST_ENABLE);
+	}
 	if (dev->vblank[0].enabled)
 		dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEA_FLAG;
 	if (dev->vblank[1].enabled)
@@ -286,7 +339,7 @@ void psb_irq_preinstall(struct drm_device *dev)
 	/* Revisit this area - want per device masks ? */
 	if (dev_priv->ops->hotplug)
 		dev_priv->vdc_irq_mask |= _PSB_IRQ_DISP_HOTSYNC;
-	dev_priv->vdc_irq_mask |= _PSB_IRQ_ASLE;
+	dev_priv->vdc_irq_mask |= _PSB_IRQ_ASLE | _PSB_IRQ_SGX_FLAG;
 
 	/* This register is safe even if display island is off */
 	PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
@@ -295,12 +348,16 @@ void psb_irq_preinstall(struct drm_device *dev)
 
 int psb_irq_postinstall(struct drm_device *dev)
 {
-	struct drm_psb_private *dev_priv =
-	    (struct drm_psb_private *) dev->dev_private;
+	struct drm_psb_private *dev_priv = dev->dev_private;
 	unsigned long irqflags;
 
 	spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
 
+	/* Enable 2D and MMU fault interrupts */
+	PSB_WSGX32(_PSB_CE2_BIF_REQUESTER_FAULT, PSB_CR_EVENT_HOST_ENABLE2);
+	PSB_WSGX32(_PSB_CE_TWOD_COMPLETE, PSB_CR_EVENT_HOST_ENABLE);
+	PSB_RSGX32(PSB_CR_EVENT_HOST_ENABLE); /* Post */
+
 	/* This register is safe even if display island is off */
 	PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R);
 	PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM);