dt-bindings: Explicitly allow additional properties in common schemas

In order to add meta-schema checks for additional/unevaluatedProperties
being present, all schema need to make this explicit. As common/shared
schema are included by other schemas, they should always allow for
additionalProperties.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201005183830.486085-5-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -341,6 +341,8 @@ required:
 dependencies:
   rockchip,pmu: [enable-method]
 
+additionalProperties: true
+
 examples:
   - |
     cpus {

Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml

@@ -30,6 +30,8 @@ properties:
       Specifies the bpmp node that needs to be queried to get
       operating point data for all CPUs.
 
+additionalProperties: true
+
 examples:
   - |
     cpus {

Documentation/devicetree/bindings/ata/pata-common.yaml

@@ -47,4 +47,6 @@ patternProperties:
           The ID number of the drive port, 0 for the master port and 1 for the
           slave port.
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/ata/sata-common.yaml

@@ -47,4 +47,6 @@ patternProperties:
           multiplier making it possible to connect up to 15 disks to a single
           SATA port.
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/bus/simple-pm-bus.yaml

@@ -61,6 +61,8 @@ anyOf:
   - required:
       - power-domains
 
+additionalProperties: true
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-msm8996.h>

Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml

@@ -26,6 +26,8 @@ properties:
 required:
   - compatible
 
+additionalProperties: true #fixme
+
 examples:
   - |+
     spi0 {

Documentation/devicetree/bindings/connector/usb-connector.yaml

@@ -172,6 +172,8 @@ allOf:
         type:
           const: micro
 
+additionalProperties: true
+
 examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
   - |

Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml

@@ -66,3 +66,5 @@ required:
   - clocks
   - ports
   - reg
+
+additionalProperties: true

Documentation/devicetree/bindings/display/dsi-controller.yaml

@@ -73,6 +73,8 @@ patternProperties:
     required:
       - reg
 
+additionalProperties: true
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/display/panel/lvds.yaml

@@ -112,4 +112,6 @@ oneOf:
   - required:
       - ports
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/display/panel/panel-common.yaml

@@ -163,4 +163,6 @@ dependencies:
   width-mm: [ height-mm ]
   height-mm: [ width-mm ]
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/dma/dma-common.yaml

@@ -49,3 +49,5 @@ properties:
 
 required:
   - "#dma-cells"
+
+additionalProperties: true

Documentation/devicetree/bindings/dma/dma-controller.yaml

@@ -17,6 +17,8 @@ properties:
   $nodename:
     pattern: "^dma-controller(@.*)?$"
 
+additionalProperties: true
+
 examples:
   - |
     dma: dma-controller@48000000 {

Documentation/devicetree/bindings/dma/dma-router.yaml

@@ -36,6 +36,8 @@ required:
   - "#dma-cells"
   - dma-masters
 
+additionalProperties: true
+
 examples:
   - |
     sdma_xbar: dma-router@4a002b78 {

Documentation/devicetree/bindings/extcon/wlf,arizona.yaml

@@ -123,3 +123,5 @@ properties:
     $ref: "/schemas/types.yaml#/definitions/uint32"
     minimum: 0
     maximum: 3
+
+additionalProperties: true

Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml

@@ -46,6 +46,8 @@ properties:
   "#io-channel-cells":
     const: 1
 
+  io-channel-ranges: true
+
   vdd-supply: true
 
   samsung,syscon-phandle:
@@ -68,6 +70,9 @@ required:
   - "#io-channel-cells"
   - vdd-supply
 
+additionalProperties:
+  type: object
+
 allOf:
   - if:
       properties:

Documentation/devicetree/bindings/iio/common.yaml

@@ -32,4 +32,6 @@ properties:
       considered 'near' to the device (an object is near to the
       sensor).
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/input/input.yaml

@@ -33,3 +33,5 @@ properties:
       power off automatically. Device with key pressed shutdown feature can
       specify this property.
     $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true

Documentation/devicetree/bindings/input/matrix-keymap.yaml

@@ -35,6 +35,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: Number of column lines connected to the keypad controller.
 
+additionalProperties: true
+
 examples:
   - |
     keypad {

Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml

@@ -81,3 +81,5 @@ dependencies:
   touchscreen-size-y: [ touchscreen-size-x ]
   touchscreen-x-mm: [ touchscreen-y-mm ]
   touchscreen-y-mm: [ touchscreen-x-mm ]
+
+additionalProperties: true

Documentation/devicetree/bindings/leds/common.yaml

@@ -156,6 +156,8 @@ properties:
       Maximum timeout in microseconds after which the flash LED is turned off.
       Required for flash LED nodes with configurable timeout.
 
+additionalProperties: true
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml

@@ -34,4 +34,7 @@ patternProperties:
 
     required:
       - color
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/leds/trigger-source.yaml

@@ -21,4 +21,6 @@ properties:
       trigger sources (e.g. a specific USB port).
     enum: [ 0, 1 ]
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/media/rc.yaml

@@ -150,3 +150,5 @@ properties:
       - rc-x96max
       - rc-xbox-dvd
       - rc-zx-irdec
+
+additionalProperties: true

Documentation/devicetree/bindings/mfd/syscon.yaml

@@ -71,7 +71,7 @@ required:
   - compatible
   - reg
 
-unevaluatedProperties: false
+additionalProperties: true
 
 examples:
   - |

Documentation/devicetree/bindings/mmc/mmc-controller.yaml

@@ -349,6 +349,8 @@ dependencies:
   cd-debounce-delay-ms: [ cd-gpios ]
   fixed-emmc-driver-type: [ non-removable ]
 
+additionalProperties: true
+
 examples:
   - |
     mmc@ab000000 {

Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml

@@ -62,3 +62,5 @@ properties:
 
   dma-names:
     const: rx-tx
+
+additionalProperties: true

Documentation/devicetree/bindings/mtd/nand-controller.yaml

@@ -128,6 +128,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: true
+
 examples:
   - |
     nand-controller {

Documentation/devicetree/bindings/net/can/can-transceiver.yaml

@@ -16,3 +16,5 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run.
     minimum: 1
+
+additionalProperties: true

Documentation/devicetree/bindings/net/dsa/dsa.yaml

@@ -89,4 +89,6 @@ oneOf:
   - required:
       - ethernet-ports
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/net/ethernet-controller.yaml

@@ -205,4 +205,6 @@ properties:
           required:
             - speed
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/net/ethernet-phy.yaml

@@ -177,6 +177,8 @@ properties:
 required:
   - reg
 
+additionalProperties: true
+
 examples:
   - |
     ethernet {

Documentation/devicetree/bindings/net/mdio.yaml

@@ -100,6 +100,8 @@ patternProperties:
     required:
       - reg
 
+additionalProperties: true
+
 examples:
   - |
     davinci_mdio: mdio@5c030000 {

Documentation/devicetree/bindings/net/snps,dwmac.yaml

@@ -356,6 +356,8 @@ allOf:
             Enables the TSO feature otherwise it will be managed by
             MAC HW capability register.
 
+additionalProperties: true
+
 examples:
   - |
     stmmac_axi_setup: stmmac-axi-config {

Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml

@@ -36,6 +36,8 @@ dependencies:
   nvmem-names: [ nvmem ]
   nvmem-cell-names: [ nvmem-cells ]
 
+additionalProperties: true
+
 examples:
   - |
     tsens {

Documentation/devicetree/bindings/nvmem/nvmem.yaml

@@ -67,6 +67,8 @@ patternProperties:
     required:
       - reg
 
+additionalProperties: true
+
 examples:
   - |
       #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml

@@ -22,3 +22,5 @@ properties:
 
 required:
   - cdns,max-outbound-regions
+
+additionalProperties: true

Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml

@@ -33,3 +33,5 @@ properties:
     deprecated: true
 
   msi-parent: true
+
+additionalProperties: true

Documentation/devicetree/bindings/pci/cdns-pcie.yaml

@@ -21,3 +21,5 @@ properties:
     items:
       - const: pcie-phy
     # FIXME: names when more than 1
+
+additionalProperties: true

Documentation/devicetree/bindings/pci/pci-ep.yaml

@@ -36,3 +36,5 @@ properties:
 
 required:
   - compatible
+
+additionalProperties: true

Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml

@@ -120,3 +120,5 @@ properties:
 required:
   - pinctrl-0
   - pinctrl-names
+
+additionalProperties: true

Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml

@@ -138,3 +138,5 @@ properties:
       and the delay before latching a value to an output
       pin. Typically indicates how many double-inverters are
       used to delay the signal.
+
+additionalProperties: true

Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml

@@ -129,3 +129,5 @@ properties:
 
   pinctrl-pin-array:
     $ref: /schemas/types.yaml#/definitions/uint32-array
+
+additionalProperties: true

Documentation/devicetree/bindings/power/power-domain.yaml

@@ -69,6 +69,8 @@ properties:
 required:
   - "#power-domain-cells"
 
+additionalProperties: true
+
 examples:
   - |
     power: power-controller@12340000 {

Documentation/devicetree/bindings/power/supply/power-supply.yaml

@@ -16,6 +16,8 @@ properties:
       This property is added to a supply in order to list the devices which
       supply it power, referenced by their phandles.
 
+additionalProperties: true
+
 examples:
   - |
     power {

Documentation/devicetree/bindings/pwm/pwm.yaml

@@ -20,6 +20,8 @@ properties:
 required:
   - "#pwm-cells"
 
+additionalProperties: true
+
 examples:
   - |
     pwm: pwm@7000a000 {

Documentation/devicetree/bindings/regulator/regulator.yaml

@@ -188,6 +188,8 @@ patternProperties:
 
     additionalProperties: false
 
+additionalProperties: true
+
 examples:
   - |
     xyzreg: regulator {

Documentation/devicetree/bindings/regulator/wlf,arizona.yaml

@@ -35,3 +35,5 @@ properties:
       Initial data for the MICVDD regulator.
     $ref: "regulator.yaml#"
     type: object
+
+additionalProperties: true

Documentation/devicetree/bindings/riscv/cpus.yaml

@@ -91,6 +91,8 @@ required:
   - riscv,isa
   - interrupt-controller
 
+additionalProperties: true
+
 examples:
   - |
     // Example 1: SiFive Freedom U540G Development Kit

Documentation/devicetree/bindings/rtc/rtc.yaml

@@ -47,4 +47,6 @@ properties:
     description:
       Enables wake up of host system on alarm.
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/serial/rs485.yaml

@@ -45,4 +45,7 @@ properties:
   rs485-term-gpios:
     description: GPIO pin to enable RS485 bus termination.
     maxItems: 1
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/serial/serial.yaml

@@ -124,6 +124,8 @@ patternProperties:
       required:
         - compatible
 
+additionalProperties: true
+
 examples:
   - |
     serial@1234 {

Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml

@@ -35,6 +35,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: true
+
 examples:
   - |
     bus@30000000 {

Documentation/devicetree/bindings/sound/amlogic,aiu.yaml

@@ -75,6 +75,8 @@ required:
   - reg
   - resets
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/gxbb-clkc.h>

Documentation/devicetree/bindings/sound/cirrus,madera.yaml

@@ -111,3 +111,5 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 2
     maxItems: 2
+
+additionalProperties: true

Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml

@@ -67,6 +67,9 @@ required:
   - "#size-cells"
   - ranges
 
+additionalProperties:
+  type: object
+
 examples:
   - |
     #include<dt-bindings/clock/tegra210-car.h>

Documentation/devicetree/bindings/sound/wlf,arizona.yaml

@@ -112,3 +112,5 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 12
+
+additionalProperties: true

Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml

@@ -57,6 +57,8 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: true
+
 examples:
   - |
     soundwire@c2d0000 {

Documentation/devicetree/bindings/spi/spi-controller.yaml

@@ -140,6 +140,8 @@ patternProperties:
       - compatible
       - reg
 
+additionalProperties: true
+
 examples:
   - |
     spi@f00 {

Documentation/devicetree/bindings/spmi/spmi.yaml

@@ -55,6 +55,8 @@ patternProperties:
 required:
   - reg
 
+additionalProperties: true
+
 examples:
   - |
     #include <dt-bindings/spmi/spmi.h>

Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml

@@ -49,6 +49,8 @@ properties:
       and the second cell is the maximum cooling state requested.
     const: 2
 
+additionalProperties: true
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/thermal/thermal-sensor.yaml

@@ -36,6 +36,8 @@ properties:
       containing several internal sensors.
     enum: [0, 1]
 
+additionalProperties: true
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/usb/ti,tps6598x.yaml

@@ -32,6 +32,8 @@ required:
   - interrupts
   - interrupt-names
 
+additionalProperties: true
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

Documentation/devicetree/bindings/usb/usb-hcd.yaml

@@ -22,6 +22,8 @@ properties:
     description:
       Name specifier for the USB PHY
 
+additionalProperties: true
+
 examples:
   - |
     usb {

Documentation/devicetree/bindings/watchdog/watchdog.yaml

@@ -23,4 +23,6 @@ properties:
     description:
       Contains the watchdog timeout in seconds.
 
+additionalProperties: true
+
 ...