isdn: remove spellcaster driver

The 'sc' ISDN driver relies on using readl() to access ISA I/O memory.
This has been deprecated and produced warnings since linux-2.3.23,
disabled by default since 2.4.10 and finally removed in 2.6.5.

I found this because the compiling the driver for ARM produces
a warning:

In file included from ../drivers/isdn/sc/includes.h:8:0,
                 from ../drivers/isdn/sc/init.c:13:
../arch/arm/include/asm/io.h:115:21: note: expected 'const volatile void *' but argument is of type 'long unsigned int'

It is pretty clear that this driver has not been used for a long time
and there is no point fixing it now, so let's remove it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/isdn/Makefile

@@ -10,7 +10,6 @@ obj-$(CONFIG_ISDN_DIVERSION)		+= divert/
 obj-$(CONFIG_ISDN_DRV_HISAX)		+= hisax/
 obj-$(CONFIG_ISDN_DRV_ICN)		+= icn/
 obj-$(CONFIG_ISDN_DRV_PCBIT)		+= pcbit/
-obj-$(CONFIG_ISDN_DRV_SC)		+= sc/
 obj-$(CONFIG_ISDN_DRV_LOOP)		+= isdnloop/
 obj-$(CONFIG_ISDN_DRV_ACT2000)		+= act2000/
 obj-$(CONFIG_HYSDN)			+= hysdn/

drivers/isdn/i4l/Kconfig

@@ -130,8 +130,6 @@ source "drivers/isdn/icn/Kconfig"
 
 source "drivers/isdn/pcbit/Kconfig"
 
-source "drivers/isdn/sc/Kconfig"
-
 source "drivers/isdn/act2000/Kconfig"
 
 endmenu

drivers/isdn/sc/Kconfig

-config ISDN_DRV_SC
-	tristate "Spellcaster support"
-	depends on ISA
-	help
-	  This enables support for the Spellcaster BRI ISDN boards.  This
-	  driver currently builds only in a modularized version.
-	  To build it, choose M here: the module will be called sc.
-	  See <file:Documentation/isdn/README.sc> for more information.

drivers/isdn/sc/Makefile

-# Makefile for the sc ISDN device driver
-
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_ISDN_DRV_SC)	+= sc.o
-
-# Multipart objects.
-
-sc-y				:= shmem.o init.o packet.o command.o event.o \
-		   		   ioctl.o interrupt.o message.o timer.o	

drivers/isdn/sc/card.h

-/* $Id: card.h,v 1.1.10.1 2001/09/23 22:24:59 kai Exp $
- *
- * Driver parameters for SpellCaster ISA ISDN adapters
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#ifndef CARD_H
-#define CARD_H
-
-/*
- * We need these if they're not already included
- */
-#include <linux/timer.h>
-#include <linux/time.h>
-#include <linux/isdnif.h>
-#include <linux/irqreturn.h>
-#include "message.h"
-#include "scioc.h"
-
-/*
- * Amount of time to wait for a reset to complete
- */
-#define CHECKRESET_TIME		msecs_to_jiffies(4000)
-
-/*
- * Amount of time between line status checks
- */
-#define CHECKSTAT_TIME		msecs_to_jiffies(8000)
-
-/*
- * The maximum amount of time to wait for a message response
- * to arrive. Use exclusively by send_and_receive
- */
-#define SAR_TIMEOUT		msecs_to_jiffies(10000)
-
-/*
- * Macro to determine is a card id is valid
- */
-#define IS_VALID_CARD(x)	((x >= 0) && (x <= cinst))
-
-/*
- * Per channel status and configuration
- */
-typedef struct {
-	int l2_proto;
-	int l3_proto;
-	char dn[50];
-	unsigned long first_sendbuf;	/* Offset of first send buffer */
-	unsigned int num_sendbufs;	/* Number of send buffers */
-	unsigned int free_sendbufs;	/* Number of free sendbufs */
-	unsigned int next_sendbuf;	/* Next sequential buffer */
-	char eazlist[50];		/* Set with SETEAZ */
-	char sillist[50];		/* Set with SETSIL */
-	int eazclear;			/* Don't accept calls if TRUE */
-} bchan;
-
-/*
- * Everything you want to know about the adapter ...
- */
-typedef struct {
-	int model;
-	int driverId;			/* LL Id */
-	char devicename[20];		/* The device name */
-	isdn_if *card;			/* ISDN4Linux structure */
-	bchan *channel;			/* status of the B channels */
-	char nChannels;			/* Number of channels */
-	unsigned int interrupt;		/* Interrupt number */
-	int iobase;			/* I/O Base address */
-	int ioport[MAX_IO_REGS];	/* Index to I/O ports */
-	int shmem_pgport;		/* port for the exp mem page reg. */
-	int shmem_magic;		/* adapter magic number */
-	unsigned int rambase;		/* Shared RAM base address */
-	unsigned int ramsize;		/* Size of shared memory */
-	RspMessage async_msg;		/* Async response message */
-	int want_async_messages;	/* Snoop the Q ? */
-	unsigned char seq_no;		/* Next send seq. number */
-	struct timer_list reset_timer;	/* Check reset timer */
-	struct timer_list stat_timer;	/* Check startproc timer */
-	unsigned char nphystat;		/* Latest PhyStat info */
-	unsigned char phystat;		/* Last PhyStat info */
-	HWConfig_pl hwconfig;		/* Hardware config info */
-	char load_ver[11];		/* CommManage Version string */
-	char proc_ver[11];		/* CommEngine Version */
-	int StartOnReset;		/* Indicates startproc after reset */
-	int EngineUp;			/* Indicates CommEngine Up */
-	int trace_mode;			/* Indicate if tracing is on */
-	spinlock_t lock;		/* local lock */
-} board;
-
-
-extern board *sc_adapter[];
-extern int cinst;
-
-void memcpy_toshmem(int card, void *dest, const void *src, size_t n);
-void memcpy_fromshmem(int card, void *dest, const void *src, size_t n);
-int get_card_from_id(int driver);
-int indicate_status(int card, int event, ulong Channel, char *Data);
-irqreturn_t interrupt_handler(int interrupt, void *cardptr);
-int sndpkt(int devId, int channel, int ack, struct sk_buff *data);
-void rcvpkt(int card, RspMessage *rcvmsg);
-int command(isdn_ctrl *cmd);
-int reset(int card);
-int startproc(int card);
-int send_and_receive(int card, unsigned int procid, unsigned char type,
-		     unsigned char class, unsigned char code,
-		     unsigned char link, unsigned char data_len,
-		     unsigned char *data,  RspMessage *mesgdata, int timeout);
-void flushreadfifo(int card);
-int sendmessage(int card, unsigned int procid, unsigned int type,
-		unsigned int class, unsigned int code, unsigned int link,
-		unsigned int data_len, unsigned int *data);
-int receivemessage(int card, RspMessage *rspmsg);
-int sc_ioctl(int card, scs_ioctl *data);
-int setup_buffers(int card, int c);
-void sc_check_reset(unsigned long data);
-void check_phystat(unsigned long data);
-
-#endif /* CARD_H */

drivers/isdn/sc/command.c

-/* $Id: command.c,v 1.4.10.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#include <linux/module.h>
-#include "includes.h"		/* This must be first */
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-#include "scioc.h"
-
-static int dial(int card, unsigned long channel, setup_parm setup);
-static int hangup(int card, unsigned long channel);
-static int answer(int card, unsigned long channel);
-static int clreaz(int card, unsigned long channel);
-static int seteaz(int card, unsigned long channel, char *);
-static int setl2(int card, unsigned long arg);
-static int setl3(int card, unsigned long arg);
-static int acceptb(int card, unsigned long channel);
-
-#ifdef DEBUG
-/*
- * Translate command codes to strings
- */
-static char *commands[] = { "ISDN_CMD_IOCTL",
-			    "ISDN_CMD_DIAL",
-			    "ISDN_CMD_ACCEPTB",
-			    "ISDN_CMD_ACCEPTB",
-			    "ISDN_CMD_HANGUP",
-			    "ISDN_CMD_CLREAZ",
-			    "ISDN_CMD_SETEAZ",
-			    NULL,
-			    NULL,
-			    NULL,
-			    "ISDN_CMD_SETL2",
-			    NULL,
-			    "ISDN_CMD_SETL3",
-			    NULL,
-			    NULL,
-			    NULL,
-			    NULL,
-			    NULL, };
-
-/*
- * Translates ISDN4Linux protocol codes to strings for debug messages
- */
-static char *l3protos[] = { "ISDN_PROTO_L3_TRANS" };
-static char *l2protos[] = { "ISDN_PROTO_L2_X75I",
-			    "ISDN_PROTO_L2_X75UI",
-			    "ISDN_PROTO_L2_X75BUI",
-			    "ISDN_PROTO_L2_HDLC",
-			    "ISDN_PROTO_L2_TRANS" };
-#endif
-
-int get_card_from_id(int driver)
-{
-	int i;
-
-	for (i = 0; i < cinst; i++) {
-		if (sc_adapter[i]->driverId == driver)
-			return i;
-	}
-	return -ENODEV;
-}
-
-/*
- * command
- */
-
-int command(isdn_ctrl *cmd)
-{
-	int card;
-
-	card = get_card_from_id(cmd->driver);
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	/*
-	 * Dispatch the command
-	 */
-	switch (cmd->command) {
-	case ISDN_CMD_IOCTL:
-	{
-		unsigned long	cmdptr;
-		scs_ioctl	ioc;
-
-		memcpy(&cmdptr, cmd->parm.num, sizeof(unsigned long));
-		if (copy_from_user(&ioc, (scs_ioctl __user *)cmdptr,
-				   sizeof(scs_ioctl))) {
-			pr_debug("%s: Failed to verify user space 0x%lx\n",
-				 sc_adapter[card]->devicename, cmdptr);
-			return -EFAULT;
-		}
-		return sc_ioctl(card, &ioc);
-	}
-	case ISDN_CMD_DIAL:
-		return dial(card, cmd->arg, cmd->parm.setup);
-	case ISDN_CMD_HANGUP:
-		return hangup(card, cmd->arg);
-	case ISDN_CMD_ACCEPTD:
-		return answer(card, cmd->arg);
-	case ISDN_CMD_ACCEPTB:
-		return acceptb(card, cmd->arg);
-	case ISDN_CMD_CLREAZ:
-		return clreaz(card, cmd->arg);
-	case ISDN_CMD_SETEAZ:
-		return seteaz(card, cmd->arg, cmd->parm.num);
-	case ISDN_CMD_SETL2:
-		return setl2(card, cmd->arg);
-	case ISDN_CMD_SETL3:
-		return setl3(card, cmd->arg);
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/*
- * start the onboard firmware
- */
-int startproc(int card)
-{
-	int status;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	/*
-	 * send start msg
-	 */
-	status = sendmessage(card, CMPID, cmReqType2,
-			     cmReqClass0,
-			     cmReqStartProc,
-			     0, 0, NULL);
-	pr_debug("%s: Sent startProc\n", sc_adapter[card]->devicename);
-
-	return status;
-}
-
-
-/*
- * Dials the number passed in
- */
-static int dial(int card, unsigned long channel, setup_parm setup)
-{
-	int status;
-	char Phone[48];
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	/*extract ISDN number to dial from eaz/msn string*/
-	strcpy(Phone, setup.phone);
-
-	/*send the connection message*/
-	status = sendmessage(card, CEPID, ceReqTypePhy,
-			     ceReqClass1,
-			     ceReqPhyConnect,
-			     (unsigned char)channel + 1,
-			     strlen(Phone),
-			     (unsigned int *)Phone);
-
-	pr_debug("%s: Dialing %s on channel %lu\n",
-		 sc_adapter[card]->devicename, Phone, channel + 1);
-
-	return status;
-}
-
-/*
- * Answer an incoming call
- */
-static int answer(int card, unsigned long channel)
-{
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	if (setup_buffers(card, channel + 1)) {
-		hangup(card, channel + 1);
-		return -ENOBUFS;
-	}
-
-	indicate_status(card, ISDN_STAT_BCONN, channel, NULL);
-	pr_debug("%s: Answered incoming call on channel %lu\n",
-		 sc_adapter[card]->devicename, channel + 1);
-	return 0;
-}
-
-/*
- * Hangup up the call on specified channel
- */
-static int hangup(int card, unsigned long channel)
-{
-	int status;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	status = sendmessage(card, CEPID, ceReqTypePhy,
-			     ceReqClass1,
-			     ceReqPhyDisconnect,
-			     (unsigned char)channel + 1,
-			     0,
-			     NULL);
-	pr_debug("%s: Sent HANGUP message to channel %lu\n",
-		 sc_adapter[card]->devicename, channel + 1);
-	return status;
-}
-
-/*
- * Set the layer 2 protocol (X.25, HDLC, Raw)
- */
-static int setl2(int card, unsigned long arg)
-{
-	int status = 0;
-	int protocol, channel;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-	protocol = arg >> 8;
-	channel = arg & 0xff;
-	sc_adapter[card]->channel[channel].l2_proto = protocol;
-
-	/*
-	 * check that the adapter is also set to the correct protocol
-	 */
-	pr_debug("%s: Sending GetFrameFormat for channel %d\n",
-		 sc_adapter[card]->devicename, channel + 1);
-	status = sendmessage(card, CEPID, ceReqTypeCall,
-			     ceReqClass0,
-			     ceReqCallGetFrameFormat,
-			     (unsigned char)channel + 1,
-			     1,
-			     (unsigned int *)protocol);
-	if (status)
-		return status;
-	return 0;
-}
-
-/*
- * Set the layer 3 protocol
- */
-static int setl3(int card, unsigned long channel)
-{
-	int protocol = channel >> 8;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	sc_adapter[card]->channel[channel].l3_proto = protocol;
-	return 0;
-}
-
-static int acceptb(int card, unsigned long channel)
-{
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	if (setup_buffers(card, channel + 1))
-	{
-		hangup(card, channel + 1);
-		return -ENOBUFS;
-	}
-
-	pr_debug("%s: B-Channel connection accepted on channel %lu\n",
-		 sc_adapter[card]->devicename, channel + 1);
-	indicate_status(card, ISDN_STAT_BCONN, channel, NULL);
-	return 0;
-}
-
-static int clreaz(int card, unsigned long arg)
-{
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	strcpy(sc_adapter[card]->channel[arg].eazlist, "");
-	sc_adapter[card]->channel[arg].eazclear = 1;
-	pr_debug("%s: EAZ List cleared for channel %lu\n",
-		 sc_adapter[card]->devicename, arg + 1);
-	return 0;
-}
-
-static int seteaz(int card, unsigned long arg, char *num)
-{
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	strcpy(sc_adapter[card]->channel[arg].eazlist, num);
-	sc_adapter[card]->channel[arg].eazclear = 0;
-	pr_debug("%s: EAZ list for channel %lu set to: %s\n",
-		 sc_adapter[card]->devicename, arg + 1,
-		 sc_adapter[card]->channel[arg].eazlist);
-	return 0;
-}
-
-int reset(int card)
-{
-	unsigned long flags;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	indicate_status(card, ISDN_STAT_STOP, 0, NULL);
-
-	if (sc_adapter[card]->EngineUp) {
-		del_timer(&sc_adapter[card]->stat_timer);
-	}
-
-	sc_adapter[card]->EngineUp = 0;
-
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-	init_timer(&sc_adapter[card]->reset_timer);
-	sc_adapter[card]->reset_timer.function = sc_check_reset;
-	sc_adapter[card]->reset_timer.data = card;
-	sc_adapter[card]->reset_timer.expires = jiffies + CHECKRESET_TIME;
-	add_timer(&sc_adapter[card]->reset_timer);
-	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-
-	outb(0x1, sc_adapter[card]->ioport[SFT_RESET]);
-
-	pr_debug("%s: Adapter Reset\n", sc_adapter[card]->devicename);
-	return 0;
-}
-
-void flushreadfifo(int card)
-{
-	while (inb(sc_adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA)
-		inb(sc_adapter[card]->ioport[FIFO_READ]);
-}

drivers/isdn/sc/event.c

-/* $Id: event.c,v 1.4.8.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-
-#ifdef DEBUG
-static char *events[] = { "ISDN_STAT_STAVAIL",
-			  "ISDN_STAT_ICALL",
-			  "ISDN_STAT_RUN",
-			  "ISDN_STAT_STOP",
-			  "ISDN_STAT_DCONN",
-			  "ISDN_STAT_BCONN",
-			  "ISDN_STAT_DHUP",
-			  "ISDN_STAT_BHUP",
-			  "ISDN_STAT_CINF",
-			  "ISDN_STAT_LOAD",
-			  "ISDN_STAT_UNLOAD",
-			  "ISDN_STAT_BSENT",
-			  "ISDN_STAT_NODCH",
-			  "ISDN_STAT_ADDCH",
-			  "ISDN_STAT_CAUSE" };
-#endif
-
-int indicate_status(int card, int event, ulong Channel, char *Data)
-{
-	isdn_ctrl cmd;
-
-#ifdef DEBUG
-	pr_debug("%s: Indicating event %s on Channel %d\n",
-		 sc_adapter[card]->devicename, events[event - 256], Channel);
-#endif
-	if (Data != NULL) {
-		pr_debug("%s: Event data: %s\n", sc_adapter[card]->devicename,
-			 Data);
-		switch (event) {
-		case ISDN_STAT_BSENT:
-			memcpy(&cmd.parm.length, Data, sizeof(cmd.parm.length));
-			break;
-		case ISDN_STAT_ICALL:
-			memcpy(&cmd.parm.setup, Data, sizeof(cmd.parm.setup));
-			break;
-		default:
-			strlcpy(cmd.parm.num, Data, sizeof(cmd.parm.num));
-		}
-	}
-
-	cmd.command = event;
-	cmd.driver = sc_adapter[card]->driverId;
-	cmd.arg = Channel;
-	return sc_adapter[card]->card->statcallb(&cmd);
-}

drivers/isdn/sc/hardware.h

-/*
- * Hardware specific macros, defines and structures
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef HARDWARE_H
-#define HARDWARE_H
-
-#include <asm/param.h>			/* For HZ */
-
-/*
- * General hardware parameters common to all ISA adapters
- */
-
-#define MAX_CARDS	4		/* The maximum number of cards to
-					   control or probe for. */
-
-#define SIGNATURE	0x87654321	/* Board reset signature */
-#define SIG_OFFSET	0x1004		/* Where to find signature in shared RAM */
-#define TRACE_OFFSET	0x1008		/* Trace enable word offset in shared RAM */
-#define BUFFER_OFFSET	0x1800		/* Beginning of buffers */
-
-/* I/O Port parameters */
-#define IOBASE_MIN	0x180		/* Lowest I/O port address */
-#define IOBASE_MAX	0x3C0		/* Highest I/O port address */
-#define IOBASE_OFFSET	0x20		/* Inter-board I/O port gap used during
-					   probing */
-#define FIFORD_OFFSET	0x0
-#define FIFOWR_OFFSET	0x400
-#define FIFOSTAT_OFFSET	0x1000
-#define RESET_OFFSET	0x2800
-#define PG0_OFFSET	0x3000		/* Offset from I/O Base for Page 0 register */
-#define PG1_OFFSET	0x3400		/* Offset from I/O Base for Page 1 register */
-#define PG2_OFFSET	0x3800		/* Offset from I/O Base for Page 2 register */
-#define PG3_OFFSET	0x3C00		/* Offset from I/O Base for Page 3 register */
-
-#define FIFO_READ	0		/* FIFO Read register */
-#define FIFO_WRITE	1		/* FIFO Write rgister */
-#define LO_ADDR_PTR	2		/* Extended RAM Low Addr Pointer */
-#define HI_ADDR_PTR	3		/* Extended RAM High Addr Pointer */
-#define NOT_USED_1	4
-#define FIFO_STATUS	5		/* FIFO Status Register */
-#define NOT_USED_2	6
-#define MEM_OFFSET	7
-#define SFT_RESET	10		/* Reset Register */
-#define EXP_BASE	11		/* Shared RAM Base address */
-#define EXP_PAGE0	12		/* Shared RAM Page0 register */
-#define EXP_PAGE1	13		/* Shared RAM Page1 register */
-#define EXP_PAGE2	14		/* Shared RAM Page2 register */
-#define EXP_PAGE3	15		/* Shared RAM Page3 register */
-#define IRQ_SELECT	16		/* IRQ selection register */
-#define MAX_IO_REGS	17		/* Total number of I/O ports */
-
-/* FIFO register values */
-#define RF_HAS_DATA	0x01		/* fifo has data */
-#define RF_QUART_FULL	0x02		/* fifo quarter full */
-#define RF_HALF_FULL	0x04		/* fifo half full */
-#define RF_NOT_FULL	0x08		/* fifo not full */
-#define WF_HAS_DATA	0x10		/* fifo has data */
-#define WF_QUART_FULL	0x20		/* fifo quarter full */
-#define WF_HALF_FULL	0x40		/* fifo half full */
-#define WF_NOT_FULL	0x80		/* fifo not full */
-
-/* Shared RAM parameters */
-#define SRAM_MIN	0xC0000         /* Lowest host shared RAM address */
-#define SRAM_MAX	0xEFFFF         /* Highest host shared RAM address */
-#define SRAM_PAGESIZE	0x4000		/* Size of one RAM page (16K) */
-
-/* Shared RAM buffer parameters */
-#define BUFFER_SIZE	0x800		/* The size of a buffer in bytes */
-#define BUFFER_BASE	BUFFER_OFFSET	/* Offset from start of shared RAM
-					   where buffer start */
-#define BUFFERS_MAX	16		/* Maximum number of send/receive
-					   buffers per channel */
-#define HDLC_PROTO	0x01		/* Frame Format for Layer 2 */
-
-#define BRI_BOARD	0
-#define POTS_BOARD	1
-#define PRI_BOARD	2
-
-/*
- * Specific hardware parameters for the DataCommute/BRI
- */
-#define BRI_CHANNELS	2		/* Number of B channels */
-#define BRI_BASEPG_VAL	0x98
-#define BRI_MAGIC	0x60000		/* Magic Number */
-#define BRI_MEMSIZE	0x10000		/* Amount of RAM (64K) */
-#define BRI_PARTNO	"72-029"
-#define BRI_FEATURES	ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
-/*
- * Specific hardware parameters for the DataCommute/PRI
- */
-#define PRI_CHANNELS	23		/* Number of B channels */
-#define PRI_BASEPG_VAL	0x88
-#define PRI_MAGIC	0x20000		/* Magic Number */
-#define PRI_MEMSIZE	0x100000	/* Amount of RAM (1M) */
-#define PRI_PARTNO	"72-030"
-#define PRI_FEATURES	ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
-
-/*
- * Some handy macros
- */
-
-/* Determine if a channel number is valid for the adapter */
-#define IS_VALID_CHANNEL(y, x)	((x > 0) && (x <= sc_adapter[y]->channels))
-
-#endif

drivers/isdn/sc/includes.h

-/*
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/errno.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/isdnif.h>

drivers/isdn/sc/interrupt.c

-/* $Id: interrupt.c,v 1.4.8.3 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-#include <linux/interrupt.h>
-
-/*
- *
- */
-irqreturn_t interrupt_handler(int dummy, void *card_inst)
-{
-
-	RspMessage rcvmsg;
-	int channel;
-	int card = (int)(unsigned long) card_inst;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return IRQ_NONE;
-	}
-
-	pr_debug("%s: Entered Interrupt handler\n",
-		 sc_adapter[card]->devicename);
-
-	/*
-	 * Pull all of the waiting messages off the response queue
-	 */
-	while (!receivemessage(card, &rcvmsg)) {
-		/*
-		 * Push the message to the adapter structure for
-		 * send_and_receive to snoop
-		 */
-		if (sc_adapter[card]->want_async_messages)
-			memcpy(&(sc_adapter[card]->async_msg),
-			       &rcvmsg, sizeof(RspMessage));
-
-		channel = (unsigned int) rcvmsg.phy_link_no;
-
-		/*
-		 * Trap Invalid request messages
-		 */
-		if (IS_CM_MESSAGE(rcvmsg, 0, 0, Invalid)) {
-			pr_debug("%s: Invalid request Message, rsp_status = %d\n",
-				 sc_adapter[card]->devicename,
-				 rcvmsg.rsp_status);
-			break;
-		}
-
-		/*
-		 * Check for a linkRead message
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Lnk, 1, Read))
-		{
-			pr_debug("%s: Received packet 0x%x bytes long at 0x%lx\n",
-				 sc_adapter[card]->devicename,
-				 rcvmsg.msg_data.response.msg_len,
-				 rcvmsg.msg_data.response.buff_offset);
-			rcvpkt(card, &rcvmsg);
-			continue;
-
-		}
-
-		/*
-		 * Handle a write acknoledgement
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Lnk, 1, Write)) {
-			pr_debug("%s: Packet Send ACK on channel %d\n",
-				 sc_adapter[card]->devicename,
-				 rcvmsg.phy_link_no);
-			sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].free_sendbufs++;
-			continue;
-		}
-
-		/*
-		 * Handle a connection message
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Phy, 1, Connect))
-		{
-			unsigned int callid;
-			setup_parm setup;
-			pr_debug("%s: Connect message: line %d: status %d: cause 0x%x\n",
-				 sc_adapter[card]->devicename,
-				 rcvmsg.phy_link_no,
-				 rcvmsg.rsp_status,
-				 rcvmsg.msg_data.byte_array[2]);
-
-			memcpy(&callid, rcvmsg.msg_data.byte_array, sizeof(int));
-			if (callid >= 0x8000 && callid <= 0xFFFF)
-			{
-				pr_debug("%s: Got Dial-Out Rsp\n",
-					 sc_adapter[card]->devicename);
-				indicate_status(card, ISDN_STAT_DCONN,
-						(unsigned long)rcvmsg.phy_link_no - 1, NULL);
-
-			}
-			else if (callid >= 0x0000 && callid <= 0x7FFF)
-			{
-				int len;
-
-				pr_debug("%s: Got Incoming Call\n",
-					 sc_adapter[card]->devicename);
-				len = strlcpy(setup.phone, &(rcvmsg.msg_data.byte_array[4]),
-					      sizeof(setup.phone));
-				if (len >= sizeof(setup.phone))
-					continue;
-				len = strlcpy(setup.eazmsn,
-					      sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
-					      sizeof(setup.eazmsn));
-				if (len >= sizeof(setup.eazmsn))
-					continue;
-				setup.si1 = 7;
-				setup.si2 = 0;
-				setup.plan = 0;
-				setup.screen = 0;
-
-				indicate_status(card, ISDN_STAT_ICALL, (unsigned long)rcvmsg.phy_link_no - 1, (char *)&setup);
-				indicate_status(card, ISDN_STAT_DCONN, (unsigned long)rcvmsg.phy_link_no - 1, NULL);
-			}
-			continue;
-		}
-
-		/*
-		 * Handle a disconnection message
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Phy, 1, Disconnect))
-		{
-			pr_debug("%s: disconnect message: line %d: status %d: cause 0x%x\n",
-				 sc_adapter[card]->devicename,
-				 rcvmsg.phy_link_no,
-				 rcvmsg.rsp_status,
-				 rcvmsg.msg_data.byte_array[2]);
-
-			indicate_status(card, ISDN_STAT_BHUP, (unsigned long)rcvmsg.phy_link_no - 1, NULL);
-			indicate_status(card, ISDN_STAT_DHUP, (unsigned long)rcvmsg.phy_link_no - 1, NULL);
-			continue;
-
-		}
-
-		/*
-		 * Handle a startProc engine up message
-		 */
-		if (IS_CM_MESSAGE(rcvmsg, 5, 0, MiscEngineUp)) {
-			pr_debug("%s: Received EngineUp message\n",
-				 sc_adapter[card]->devicename);
-			sc_adapter[card]->EngineUp = 1;
-			sendmessage(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetMyNumber, 1, 0, NULL);
-			sendmessage(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetMyNumber, 2, 0, NULL);
-			init_timer(&sc_adapter[card]->stat_timer);
-			sc_adapter[card]->stat_timer.function = check_phystat;
-			sc_adapter[card]->stat_timer.data = card;
-			sc_adapter[card]->stat_timer.expires = jiffies + CHECKSTAT_TIME;
-			add_timer(&sc_adapter[card]->stat_timer);
-			continue;
-		}
-
-		/*
-		 * Start proc response
-		 */
-		if (IS_CM_MESSAGE(rcvmsg, 2, 0, StartProc)) {
-			pr_debug("%s: StartProc Response Status %d\n",
-				 sc_adapter[card]->devicename,
-				 rcvmsg.rsp_status);
-			continue;
-		}
-
-		/*
-		 * Handle a GetMyNumber Rsp
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Call, 0, GetMyNumber)) {
-			strlcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
-				rcvmsg.msg_data.byte_array,
-				sizeof(rcvmsg.msg_data.byte_array));
-			continue;
-		}
-
-		/*
-		 * PhyStatus response
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Phy, 2, Status)) {
-			unsigned int b1stat, b2stat;
-
-			/*
-			 * Covert the message data to the adapter->phystat code
-			 */
-			b1stat = (unsigned int) rcvmsg.msg_data.byte_array[0];
-			b2stat = (unsigned int) rcvmsg.msg_data.byte_array[1];
-
-			sc_adapter[card]->nphystat = (b2stat >> 8) | b1stat; /* endian?? */
-			pr_debug("%s: PhyStat is 0x%2x\n",
-				 sc_adapter[card]->devicename,
-				 sc_adapter[card]->nphystat);
-			continue;
-		}
-
-
-		/*
-		 * Handle a GetFramFormat
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Call, 0, GetFrameFormat)) {
-			if (rcvmsg.msg_data.byte_array[0] != HDLC_PROTO) {
-				unsigned int proto = HDLC_PROTO;
-				/*
-				 * Set board format to HDLC if it wasn't already
-				 */
-				pr_debug("%s: current frame format: 0x%x, will change to HDLC\n",
-					 sc_adapter[card]->devicename,
-					 rcvmsg.msg_data.byte_array[0]);
-				sendmessage(card, CEPID, ceReqTypeCall,
-					    ceReqClass0,
-					    ceReqCallSetFrameFormat,
-					    (unsigned char)channel + 1,
-					    1, &proto);
-			}
-			continue;
-		}
-
-		/*
-		 * Hmm...
-		 */
-		pr_debug("%s: Received unhandled message (%d,%d,%d) link %d\n",
-			 sc_adapter[card]->devicename,
-			 rcvmsg.type, rcvmsg.class, rcvmsg.code,
-			 rcvmsg.phy_link_no);
-
-	}	/* while */
-
-	pr_debug("%s: Exiting Interrupt Handler\n",
-		 sc_adapter[card]->devicename);
-	return IRQ_HANDLED;
-}

drivers/isdn/sc/message.c

-/* $Id: message.c,v 1.5.8.2 2001/09/23 22:24:59 kai Exp $
- *
- * functions for sending and receiving control messages
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-#include <linux/sched.h>
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-
-/*
- * receive a message from the board
- */
-int receivemessage(int card, RspMessage *rspmsg)
-{
-	DualPortMemory *dpm;
-	unsigned long flags;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -EINVAL;
-	}
-
-	pr_debug("%s: Entered receivemessage\n",
-		 sc_adapter[card]->devicename);
-
-	/*
-	 * See if there are messages waiting
-	 */
-	if (inb(sc_adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA) {
-		/*
-		 * Map in the DPM to the base page and copy the message
-		 */
-		spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-		outb((sc_adapter[card]->shmem_magic >> 14) | 0x80,
-		     sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
-		dpm = (DualPortMemory *) sc_adapter[card]->rambase;
-		memcpy_fromio(rspmsg, &(dpm->rsp_queue[dpm->rsp_tail]),
-			      MSG_LEN);
-		dpm->rsp_tail = (dpm->rsp_tail + 1) % MAX_MESSAGES;
-		inb(sc_adapter[card]->ioport[FIFO_READ]);
-		spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-		/*
-		 * Tell the board that the message is received
-		 */
-		pr_debug("%s: Received Message seq:%d pid:%d time:%d cmd:%d "
-			 "cnt:%d (type,class,code):(%d,%d,%d) "
-			 "link:%d stat:0x%x\n",
-			 sc_adapter[card]->devicename,
-			 rspmsg->sequence_no,
-			 rspmsg->process_id,
-			 rspmsg->time_stamp,
-			 rspmsg->cmd_sequence_no,
-			 rspmsg->msg_byte_cnt,
-			 rspmsg->type,
-			 rspmsg->class,
-			 rspmsg->code,
-			 rspmsg->phy_link_no,
-			 rspmsg->rsp_status);
-
-		return 0;
-	}
-	return -ENOMSG;
-}
-
-/*
- * send a message to the board
- */
-int sendmessage(int card,
-		unsigned int procid,
-		unsigned int type,
-		unsigned int class,
-		unsigned int code,
-		unsigned int link,
-		unsigned int data_len,
-		unsigned int *data)
-{
-	DualPortMemory *dpm;
-	ReqMessage sndmsg;
-	unsigned long flags;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -EINVAL;
-	}
-
-	/*
-	 * Make sure we only send CEPID messages when the engine is up
-	 * and CMPID messages when it is down
-	 */
-	if (sc_adapter[card]->EngineUp && procid == CMPID) {
-		pr_debug("%s: Attempt to send CM message with engine up\n",
-			 sc_adapter[card]->devicename);
-		return -ESRCH;
-	}
-
-	if (!sc_adapter[card]->EngineUp && procid == CEPID) {
-		pr_debug("%s: Attempt to send CE message with engine down\n",
-			 sc_adapter[card]->devicename);
-		return -ESRCH;
-	}
-
-	memset(&sndmsg, 0, MSG_LEN);
-	sndmsg.msg_byte_cnt = 4;
-	sndmsg.type = type;
-	sndmsg.class = class;
-	sndmsg.code = code;
-	sndmsg.phy_link_no = link;
-
-	if (data_len > 0) {
-		if (data_len > MSG_DATA_LEN)
-			data_len = MSG_DATA_LEN;
-		memcpy(&(sndmsg.msg_data), data, data_len);
-		sndmsg.msg_byte_cnt = data_len + 8;
-	}
-
-	sndmsg.process_id = procid;
-	sndmsg.sequence_no = sc_adapter[card]->seq_no++ % 256;
-
-	/*
-	 * wait for an empty slot in the queue
-	 */
-	while (!(inb(sc_adapter[card]->ioport[FIFO_STATUS]) & WF_NOT_FULL))
-		udelay(1);
-
-	/*
-	 * Disable interrupts and map in shared memory
-	 */
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-	outb((sc_adapter[card]->shmem_magic >> 14) | 0x80,
-	     sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
-	dpm = (DualPortMemory *) sc_adapter[card]->rambase;	/* Fix me */
-	memcpy_toio(&(dpm->req_queue[dpm->req_head]), &sndmsg, MSG_LEN);
-	dpm->req_head = (dpm->req_head + 1) % MAX_MESSAGES;
-	outb(sndmsg.sequence_no, sc_adapter[card]->ioport[FIFO_WRITE]);
-	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-
-	pr_debug("%s: Sent Message seq:%d pid:%d time:%d "
-		 "cnt:%d (type,class,code):(%d,%d,%d) "
-		 "link:%d\n ",
-		 sc_adapter[card]->devicename,
-		 sndmsg.sequence_no,
-		 sndmsg.process_id,
-		 sndmsg.time_stamp,
-		 sndmsg.msg_byte_cnt,
-		 sndmsg.type,
-		 sndmsg.class,
-		 sndmsg.code,
-		 sndmsg.phy_link_no);
-
-	return 0;
-}
-
-int send_and_receive(int card,
-		     unsigned int procid,
-		     unsigned char type,
-		     unsigned char class,
-		     unsigned char code,
-		     unsigned char link,
-		     unsigned char data_len,
-		     unsigned char *data,
-		     RspMessage *mesgdata,
-		     int timeout)
-{
-	int retval;
-	int tries;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -EINVAL;
-	}
-
-	sc_adapter[card]->want_async_messages = 1;
-	retval = sendmessage(card, procid, type, class, code, link,
-			     data_len, (unsigned int *) data);
-
-	if (retval) {
-		pr_debug("%s: SendMessage failed in SAR\n",
-			 sc_adapter[card]->devicename);
-		sc_adapter[card]->want_async_messages = 0;
-		return -EIO;
-	}
-
-	tries = 0;
-	/* wait for the response */
-	while (tries < timeout) {
-		schedule_timeout_interruptible(1);
-
-		pr_debug("SAR waiting..\n");
-
-		/*
-		 * See if we got our message back
-		 */
-		if ((sc_adapter[card]->async_msg.type == type) &&
-		    (sc_adapter[card]->async_msg.class == class) &&
-		    (sc_adapter[card]->async_msg.code == code) &&
-		    (sc_adapter[card]->async_msg.phy_link_no == link)) {
-
-			/*
-			 * Got it!
-			 */
-			pr_debug("%s: Got ASYNC message\n",
-				 sc_adapter[card]->devicename);
-			memcpy(mesgdata, &(sc_adapter[card]->async_msg),
-			       sizeof(RspMessage));
-			sc_adapter[card]->want_async_messages = 0;
-			return 0;
-		}
-
-		tries++;
-	}
-
-	pr_debug("%s: SAR message timeout\n", sc_adapter[card]->devicename);
-	sc_adapter[card]->want_async_messages = 0;
-	return -ETIME;
-}

drivers/isdn/sc/message.h

-/* $Id: message.h,v 1.1.10.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * structures, macros and defines useful for sending
- * messages to the adapter
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-/*
- * Board message macros, defines and structures
- */
-
-#ifndef MESSAGE_H
-#define MESSAGE_H
-
-#define MAX_MESSAGES		32	/* Maximum messages that can be
-					   queued */
-#define MSG_DATA_LEN		48	/* Maximum size of message payload */
-#define MSG_LEN			64	/* Size of a message */
-#define CMPID			0	/* Loader message process ID */
-#define CEPID			64	/* Firmware message process ID */
-
-/*
- * Macro to determine if a message is a loader message
- */
-#define IS_CM_MESSAGE(mesg, tx, cx, dx)		\
-	((mesg.type == cmRspType##tx)		\
-	 && (mesg.class == cmRspClass##cx)	\
-	 && (mesg.code == cmRsp##dx))
-
-/*
- * Macro to determine if a message is a firmware message
- */
-#define IS_CE_MESSAGE(mesg, tx, cx, dx)		\
-	((mesg.type == ceRspType##tx)		\
-	 && (mesg.class == ceRspClass##cx)	\
-	 && (mesg.code == ceRsp##tx##dx))
-
-/*
- * Loader Request and Response Messages
- */
-
-/* message types */
-#define cmReqType1			1
-#define cmReqType2			2
-#define cmRspType0			0
-#define cmRspType1			1
-#define cmRspType2			2
-#define cmRspType5			5
-
-/* message classes */
-#define cmReqClass0			0
-#define cmRspClass0			0
-
-/* message codes */
-#define cmReqHWConfig		1			/* 1,0,1 */
-#define cmReqMsgLpbk		2			/* 1,0,2 */
-#define cmReqVersion		3			/* 1,0,3 */
-#define cmReqLoadProc		1			/* 2,0,1 */
-#define cmReqStartProc		2			/* 2,0,2 */
-#define cmReqReadMem		6			/* 2,0,6 */
-#define cmRspHWConfig		cmReqHWConfig
-#define	cmRspMsgLpbk		cmReqMsgLpbk
-#define cmRspVersion		cmReqVersion
-#define cmRspLoadProc		cmReqLoadProc
-#define cmRspStartProc		cmReqStartProc
-#define	cmRspReadMem		cmReqReadMem
-#define cmRspMiscEngineUp	1			/* 5,0,1 */
-#define cmRspInvalid		0			/* 0,0,0 */
-
-
-/*
- * Firmware Request and Response Messages
- */
-
-/* message types */
-#define ceReqTypePhy		1
-#define ceReqTypeLnk		2
-#define ceReqTypeCall		3
-#define ceReqTypeStat		1
-#define ceRspTypeErr		0
-#define	ceRspTypePhy		ceReqTypePhy
-#define ceRspTypeLnk		ceReqTypeLnk
-#define ceRspTypeCall		ceReqTypeCall
-#define ceRspTypeStat		ceReqTypeStat
-
-/* message classes */
-#define ceReqClass0		0
-#define ceReqClass1		1
-#define ceReqClass2		2
-#define ceReqClass3		3
-#define ceRspClass0		ceReqClass0
-#define ceRspClass1		ceReqClass1
-#define ceRspClass2		ceReqClass2
-#define ceRspClass3		ceReqClass3
-
-/* message codes  (B) = BRI only, (P) = PRI only, (V) = POTS only */
-#define ceReqPhyProcInfo	1			/* 1,0,1 */
-#define ceReqPhyConnect		1			/* 1,1,1 */
-#define ceReqPhyDisconnect	2			/* 1,1,2 */
-#define ceReqPhySetParams	3			/* 1,1,3 (P) */
-#define ceReqPhyGetParams	4			/* 1,1,4 (P) */
-#define ceReqPhyStatus		1			/* 1,2,1 */
-#define ceReqPhyAcfaStatus	2			/* 1,2,2 (P) */
-#define ceReqPhyChCallState	3			/* 1,2,3 (P) */
-#define ceReqPhyChServState	4			/* 1,2,4 (P) */
-#define ceReqPhyRLoopBack	1			/* 1,3,1 */
-#define ceRspPhyProcInfo	ceReqPhyProcInfo
-#define	ceRspPhyConnect		ceReqPhyConnect
-#define ceRspPhyDisconnect	ceReqPhyDisconnect
-#define ceRspPhySetParams	ceReqPhySetParams
-#define ceRspPhyGetParams	ceReqPhyGetParams
-#define ceRspPhyStatus		ceReqPhyStatus
-#define ceRspPhyAcfaStatus	ceReqPhyAcfaStatus
-#define ceRspPhyChCallState	ceReqPhyChCallState
-#define ceRspPhyChServState	ceReqPhyChServState
-#define ceRspPhyRLoopBack	ceReqphyRLoopBack
-#define ceReqLnkSetParam	1			/* 2,0,1 */
-#define ceReqLnkGetParam	2			/* 2,0,2 */
-#define ceReqLnkGetStats	3			/* 2,0,3 */
-#define ceReqLnkWrite		1			/* 2,1,1 */
-#define ceReqLnkRead		2			/* 2,1,2 */
-#define ceReqLnkFlush		3			/* 2,1,3 */
-#define ceReqLnkWrBufTrc	4			/* 2,1,4 */
-#define ceReqLnkRdBufTrc	5			/* 2,1,5 */
-#define ceRspLnkSetParam	ceReqLnkSetParam
-#define ceRspLnkGetParam	ceReqLnkGetParam
-#define ceRspLnkGetStats	ceReqLnkGetStats
-#define ceRspLnkWrite		ceReqLnkWrite
-#define ceRspLnkRead		ceReqLnkRead
-#define ceRspLnkFlush		ceReqLnkFlush
-#define ceRspLnkWrBufTrc	ceReqLnkWrBufTrc
-#define ceRspLnkRdBufTrc	ceReqLnkRdBufTrc
-#define ceReqCallSetSwitchType	1			/* 3,0,1 */
-#define ceReqCallGetSwitchType	2			/* 3,0,2 */
-#define ceReqCallSetFrameFormat	3			/* 3,0,3 */
-#define ceReqCallGetFrameFormat	4			/* 3,0,4 */
-#define ceReqCallSetCallType	5			/* 3,0,5 */
-#define ceReqCallGetCallType	6			/* 3,0,6 */
-#define ceReqCallSetSPID	7			/* 3,0,7 (!P) */
-#define ceReqCallGetSPID	8			/* 3,0,8 (!P) */
-#define ceReqCallSetMyNumber	9			/* 3,0,9 (!P) */
-#define ceReqCallGetMyNumber	10			/* 3,0,10 (!P) */
-#define	ceRspCallSetSwitchType	ceReqCallSetSwitchType
-#define ceRspCallGetSwitchType	ceReqCallSetSwitchType
-#define ceRspCallSetFrameFormat	ceReqCallSetFrameFormat
-#define ceRspCallGetFrameFormat	ceReqCallGetFrameFormat
-#define ceRspCallSetCallType	ceReqCallSetCallType
-#define ceRspCallGetCallType	ceReqCallGetCallType
-#define ceRspCallSetSPID	ceReqCallSetSPID
-#define ceRspCallGetSPID	ceReqCallGetSPID
-#define ceRspCallSetMyNumber	ceReqCallSetMyNumber
-#define ceRspCallGetMyNumber	ceReqCallGetMyNumber
-#define ceRspStatAcfaStatus	2
-#define ceRspStat
-#define ceRspErrError		0			/* 0,0,0 */
-
-/*
- * Call Types
- */
-#define CALLTYPE_64K		0
-#define CALLTYPE_56K		1
-#define CALLTYPE_SPEECH		2
-#define CALLTYPE_31KHZ		3
-
-/*
- * Link Level data contains a pointer to and the length of
- * a buffer in shared RAM. Used by LnkRead and LnkWrite message
- * types. Part of RspMsgStruct and ReqMsgStruct.
- */
-typedef struct {
-	unsigned long buff_offset;
-	unsigned short msg_len;
-} LLData;
-
-
-/*
- * Message payload template for an HWConfig message
- */
-typedef struct {
-	char st_u_sense;
-	char powr_sense;
-	char sply_sense;
-	unsigned char asic_id;
-	long ram_size;
-	char serial_no[13];
-	char part_no[13];
-	char rev_no[2];
-} HWConfig_pl;
-
-/*
- * A Message
- */
-struct message {
-	unsigned char sequence_no;
-	unsigned char process_id;
-	unsigned char time_stamp;
-	unsigned char cmd_sequence_no;	/* Rsp messages only */
-	unsigned char reserved1[3];
-	unsigned char msg_byte_cnt;
-	unsigned char type;
-	unsigned char class;
-	unsigned char code;
-	unsigned char phy_link_no;
-	unsigned char rsp_status;	/* Rsp messages only */
-	unsigned char reseved2[3];
-	union {
-		unsigned char byte_array[MSG_DATA_LEN];
-		LLData response;
-		HWConfig_pl HWCresponse;
-	} msg_data;
-};
-
-typedef struct message ReqMessage;	/* Request message */
-typedef struct message RspMessage;	/* Response message */
-
-/*
- * The first 5010 bytes of shared memory contain the message queues,
- * indexes and other data. This structure is its template
- */
-typedef struct {
-	volatile ReqMessage req_queue[MAX_MESSAGES];
-	volatile RspMessage rsp_queue[MAX_MESSAGES];
-	volatile unsigned char req_head;
-	volatile unsigned char req_tail;
-	volatile unsigned char rsp_head;
-	volatile unsigned char rsp_tail;
-	volatile unsigned long signature;
-	volatile unsigned long trace_enable;
-	volatile unsigned char reserved[4];
-} DualPortMemory;
-
-#endif

drivers/isdn/sc/packet.c

-/* $Id: packet.c,v 1.5.8.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-
-int sndpkt(int devId, int channel, int ack, struct sk_buff *data)
-{
-	LLData	ReqLnkWrite;
-	int status;
-	int card;
-	unsigned long len;
-
-	card = get_card_from_id(devId);
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	pr_debug("%s: sndpkt: frst = 0x%lx nxt = %d  f = %d n = %d\n",
-		 sc_adapter[card]->devicename,
-		 sc_adapter[card]->channel[channel].first_sendbuf,
-		 sc_adapter[card]->channel[channel].next_sendbuf,
-		 sc_adapter[card]->channel[channel].free_sendbufs,
-		 sc_adapter[card]->channel[channel].num_sendbufs);
-
-	if (!sc_adapter[card]->channel[channel].free_sendbufs) {
-		pr_debug("%s: out of TX buffers\n",
-			 sc_adapter[card]->devicename);
-		return -EINVAL;
-	}
-
-	if (data->len > BUFFER_SIZE) {
-		pr_debug("%s: data overflows buffer size (data > buffer)\n",
-			 sc_adapter[card]->devicename);
-		return -EINVAL;
-	}
-
-	ReqLnkWrite.buff_offset = sc_adapter[card]->channel[channel].next_sendbuf *
-		BUFFER_SIZE + sc_adapter[card]->channel[channel].first_sendbuf;
-	ReqLnkWrite.msg_len = data->len; /* sk_buff size */
-	pr_debug("%s: writing %d bytes to buffer offset 0x%lx\n",
-		 sc_adapter[card]->devicename,
-		 ReqLnkWrite.msg_len, ReqLnkWrite.buff_offset);
-	memcpy_toshmem(card, (char *)ReqLnkWrite.buff_offset, data->data, ReqLnkWrite.msg_len);
-
-	/*
-	 * sendmessage
-	 */
-	pr_debug("%s: sndpkt size=%d, buf_offset=0x%lx buf_indx=%d\n",
-		 sc_adapter[card]->devicename,
-		 ReqLnkWrite.msg_len, ReqLnkWrite.buff_offset,
-		 sc_adapter[card]->channel[channel].next_sendbuf);
-
-	status = sendmessage(card, CEPID, ceReqTypeLnk, ceReqClass1, ceReqLnkWrite,
-			     channel + 1, sizeof(LLData), (unsigned int *)&ReqLnkWrite);
-	len = data->len;
-	if (status) {
-		pr_debug("%s: failed to send packet, status = %d\n",
-			 sc_adapter[card]->devicename, status);
-		return -1;
-	}
-	else {
-		sc_adapter[card]->channel[channel].free_sendbufs--;
-		sc_adapter[card]->channel[channel].next_sendbuf =
-			++sc_adapter[card]->channel[channel].next_sendbuf ==
-			sc_adapter[card]->channel[channel].num_sendbufs ? 0 :
-			sc_adapter[card]->channel[channel].next_sendbuf;
-		pr_debug("%s: packet sent successfully\n", sc_adapter[card]->devicename);
-		dev_kfree_skb(data);
-		indicate_status(card, ISDN_STAT_BSENT, channel, (char *)&len);
-	}
-	return len;
-}
-
-void rcvpkt(int card, RspMessage *rcvmsg)
-{
-	LLData newll;
-	struct sk_buff *skb;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("invalid param: %d is not a valid card id\n", card);
-		return;
-	}
-
-	switch (rcvmsg->rsp_status) {
-	case 0x01:
-	case 0x02:
-	case 0x70:
-		pr_debug("%s: error status code: 0x%x\n",
-			 sc_adapter[card]->devicename, rcvmsg->rsp_status);
-		return;
-	case 0x00:
-		if (!(skb = dev_alloc_skb(rcvmsg->msg_data.response.msg_len))) {
-			printk(KERN_WARNING "%s: rcvpkt out of memory, dropping packet\n",
-			       sc_adapter[card]->devicename);
-			return;
-		}
-		skb_put(skb, rcvmsg->msg_data.response.msg_len);
-		pr_debug("%s: getting data from offset: 0x%lx\n",
-			 sc_adapter[card]->devicename,
-			 rcvmsg->msg_data.response.buff_offset);
-		memcpy_fromshmem(card,
-				 skb_put(skb, rcvmsg->msg_data.response.msg_len),
-				 (char *)rcvmsg->msg_data.response.buff_offset,
-				 rcvmsg->msg_data.response.msg_len);
-		sc_adapter[card]->card->rcvcallb_skb(sc_adapter[card]->driverId,
-						     rcvmsg->phy_link_no - 1, skb);
-
-	case 0x03:
-		/*
-		 * Recycle the buffer
-		 */
-		pr_debug("%s: buffer size : %d\n",
-			 sc_adapter[card]->devicename, BUFFER_SIZE);
-/*		memset_shmem(card, rcvmsg->msg_data.response.buff_offset, 0, BUFFER_SIZE); */
-		newll.buff_offset = rcvmsg->msg_data.response.buff_offset;
-		newll.msg_len = BUFFER_SIZE;
-		pr_debug("%s: recycled buffer at offset 0x%lx size %d\n",
-			 sc_adapter[card]->devicename,
-			 newll.buff_offset, newll.msg_len);
-		sendmessage(card, CEPID, ceReqTypeLnk, ceReqClass1, ceReqLnkRead,
-			    rcvmsg->phy_link_no, sizeof(LLData), (unsigned int *)&newll);
-	}
-
-}
-
-int setup_buffers(int card, int c)
-{
-	unsigned int nBuffers, i, cBase;
-	unsigned int buffer_size;
-	LLData	RcvBuffOffset;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	/*
-	 * Calculate the buffer offsets (send/recv/send/recv)
-	 */
-	pr_debug("%s: setting up channel buffer space in shared RAM\n",
-		 sc_adapter[card]->devicename);
-	buffer_size = BUFFER_SIZE;
-	nBuffers = ((sc_adapter[card]->ramsize - BUFFER_BASE) / buffer_size) / 2;
-	nBuffers = nBuffers > BUFFERS_MAX ? BUFFERS_MAX : nBuffers;
-	pr_debug("%s: calculating buffer space: %d buffers, %d big\n",
-		 sc_adapter[card]->devicename,
-		 nBuffers, buffer_size);
-	if (nBuffers < 2) {
-		pr_debug("%s: not enough buffer space\n",
-			 sc_adapter[card]->devicename);
-		return -1;
-	}
-	cBase = (nBuffers * buffer_size) * (c - 1);
-	pr_debug("%s: channel buffer offset from shared RAM: 0x%x\n",
-		 sc_adapter[card]->devicename, cBase);
-	sc_adapter[card]->channel[c - 1].first_sendbuf = BUFFER_BASE + cBase;
-	sc_adapter[card]->channel[c - 1].num_sendbufs = nBuffers / 2;
-	sc_adapter[card]->channel[c - 1].free_sendbufs = nBuffers / 2;
-	sc_adapter[card]->channel[c - 1].next_sendbuf = 0;
-	pr_debug("%s: send buffer setup complete: first=0x%lx n=%d f=%d, nxt=%d\n",
-		 sc_adapter[card]->devicename,
-		 sc_adapter[card]->channel[c - 1].first_sendbuf,
-		 sc_adapter[card]->channel[c - 1].num_sendbufs,
-		 sc_adapter[card]->channel[c - 1].free_sendbufs,
-		 sc_adapter[card]->channel[c - 1].next_sendbuf);
-
-	/*
-	 * Prep the receive buffers
-	 */
-	pr_debug("%s: adding %d RecvBuffers:\n",
-		 sc_adapter[card]->devicename, nBuffers / 2);
-	for (i = 0; i < nBuffers / 2; i++) {
-		RcvBuffOffset.buff_offset =
-			((sc_adapter[card]->channel[c - 1].first_sendbuf +
-			  (nBuffers / 2) * buffer_size) + (buffer_size * i));
-		RcvBuffOffset.msg_len = buffer_size;
-		pr_debug("%s: adding RcvBuffer #%d offset=0x%lx sz=%d bufsz:%d\n",
-			 sc_adapter[card]->devicename,
-			 i + 1, RcvBuffOffset.buff_offset,
-			 RcvBuffOffset.msg_len, buffer_size);
-		sendmessage(card, CEPID, ceReqTypeLnk, ceReqClass1, ceReqLnkRead,
-			    c, sizeof(LLData), (unsigned int *)&RcvBuffOffset);
-	}
-	return 0;
-}

drivers/isdn/sc/scioc.h

-#ifndef __ISDN_SC_SCIOC_H__
-#define __ISDN_SC_SCIOC_H__
-
-/*
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- */
-
-/*
- * IOCTL Command Codes
- */
-#define SCIOCLOAD	0x01	/* Load a firmware record */
-#define SCIOCRESET	0x02	/* Perform hard reset */
-#define SCIOCDEBUG	0x03	/* Set debug level */
-#define SCIOCREV	0x04	/* Get driver revision(s) */
-#define SCIOCSTART	0x05	/* Start the firmware */
-#define SCIOCGETSWITCH	0x06	/* Get switch type */
-#define SCIOCSETSWITCH	0x07	/* Set switch type */
-#define SCIOCGETSPID	0x08	/* Get channel SPID */
-#define SCIOCSETSPID	0x09	/* Set channel SPID */
-#define SCIOCGETDN	0x0A	/* Get channel DN */
-#define SCIOCSETDN	0x0B	/* Set channel DN */
-#define SCIOCTRACE	0x0C	/* Toggle trace mode */
-#define SCIOCSTAT	0x0D	/* Get line status */
-#define SCIOCGETSPEED	0x0E	/* Set channel speed */
-#define SCIOCSETSPEED	0x0F	/* Set channel speed */
-#define SCIOCLOOPTST	0x10	/* Perform loopback test */
-
-typedef struct {
-	int device;
-	int channel;
-	unsigned long command;
-	void __user *dataptr;
-} scs_ioctl;
-
-/* Size of strings */
-#define SCIOC_SPIDSIZE		49
-#define SCIOC_DNSIZE		SCIOC_SPIDSIZE
-#define SCIOC_REVSIZE		SCIOC_SPIDSIZE
-#define SCIOC_SRECSIZE		49
-
-typedef struct {
-	unsigned long tx_good;
-	unsigned long tx_bad;
-	unsigned long rx_good;
-	unsigned long rx_bad;
-} ChLinkStats;
-
-typedef struct {
-	char spid[49];
-	char dn[49];
-	char call_type;
-	char phy_stat;
-	ChLinkStats link_stats;
-} BRIStat;
-
-typedef BRIStat POTStat;
-
-typedef struct {
-	char call_type;
-	char call_state;
-	char serv_state;
-	char phy_stat;
-	ChLinkStats link_stats;
-} PRIStat;
-
-typedef char PRIInfo;
-typedef char BRIInfo;
-typedef char POTInfo;
-
-
-typedef struct {
-	char acfa_nos;
-	char acfa_ais;
-	char acfa_los;
-	char acfa_rra;
-	char acfa_slpp;
-	char acfa_slpn;
-	char acfa_fsrf;
-} ACFAStat;
-
-typedef struct {
-	unsigned char modelid;
-	char serial_no[13];
-	char part_no[13];
-	char load_ver[11];
-	char proc_ver[11];
-	int iobase;
-	long rambase;
-	char irq;
-	long ramsize;
-	char interface;
-	char switch_type;
-	char l1_status;
-	char l2_status;
-	ChLinkStats dch_stats;
-	ACFAStat AcfaStats;
-	union {
-		PRIStat pristats[23];
-		BRIStat bristats[2];
-		POTStat potsstats[2];
-	} status;
-	union {
-		PRIInfo priinfo;
-		BRIInfo briinfo;
-		POTInfo potsinfo;
-	} info;
-} boardInfo;
-
-#endif  /*  __ISDN_SC_SCIOC_H__  */

drivers/isdn/sc/shmem.c

-/* $Id: shmem.c,v 1.2.10.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * Card functions implementing ISDN4Linux functionality
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"		/* This must be first */
-#include "hardware.h"
-#include "card.h"
-
-/*
- *
- */
-void memcpy_toshmem(int card, void *dest, const void *src, size_t n)
-{
-	unsigned long flags;
-	unsigned char ch;
-	unsigned long dest_rem = ((unsigned long) dest) % 0x4000;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return;
-	}
-
-	if (n > SRAM_PAGESIZE)
-		return;
-
-	/*
-	 * determine the page to load from the address
-	 */
-	ch = (unsigned long) dest / SRAM_PAGESIZE;
-	pr_debug("%s: loaded page %d\n", sc_adapter[card]->devicename, ch);
-	/*
-	 * Block interrupts and load the page
-	 */
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-
-	outb(((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80,
-	     sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
-	memcpy_toio((void __iomem *)(sc_adapter[card]->rambase + dest_rem), src, n);
-	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-	pr_debug("%s: set page to %#x\n", sc_adapter[card]->devicename,
-		 ((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80);
-	pr_debug("%s: copying %zu bytes from %#lx to %#lx\n",
-		 sc_adapter[card]->devicename, n,
-		 (unsigned long) src,
-		 sc_adapter[card]->rambase + ((unsigned long) dest % 0x4000));
-}
-
-/*
- * Reverse of above
- */
-void memcpy_fromshmem(int card, void *dest, const void *src, size_t n)
-{
-	unsigned long flags;
-	unsigned char ch;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return;
-	}
-
-	if (n > SRAM_PAGESIZE) {
-		return;
-	}
-
-	/*
-	 * determine the page to load from the address
-	 */
-	ch = (unsigned long) src / SRAM_PAGESIZE;
-	pr_debug("%s: loaded page %d\n", sc_adapter[card]->devicename, ch);
-
-
-	/*
-	 * Block interrupts and load the page
-	 */
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-
-	outb(((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80,
-	     sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
-	memcpy_fromio(dest, (void *)(sc_adapter[card]->rambase +
-				     ((unsigned long) src % 0x4000)), n);
-	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-	pr_debug("%s: set page to %#x\n", sc_adapter[card]->devicename,
-		 ((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80);
-/*	pr_debug("%s: copying %d bytes from %#x to %#x\n",
-	sc_adapter[card]->devicename, n,
-	sc_adapter[card]->rambase + ((unsigned long) src %0x4000), (unsigned long) dest); */
-}
-
-#if 0
-void memset_shmem(int card, void *dest, int c, size_t n)
-{
-	unsigned long flags;
-	unsigned char ch;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return;
-	}
-
-	if (n > SRAM_PAGESIZE) {
-		return;
-	}
-
-	/*
-	 * determine the page to load from the address
-	 */
-	ch = (unsigned long) dest / SRAM_PAGESIZE;
-	pr_debug("%s: loaded page %d\n", sc_adapter[card]->devicename, ch);
-
-	/*
-	 * Block interrupts and load the page
-	 */
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-
-	outb(((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80,
-	     sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
-	memset_io(sc_adapter[card]->rambase +
-		  ((unsigned long) dest % 0x4000), c, n);
-	pr_debug("%s: set page to %#x\n", sc_adapter[card]->devicename,
-		 ((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80);
-	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-}
-#endif  /*  0  */

drivers/isdn/sc/timer.c

-/* $Id: timer.c,v 1.3.6.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-
-
-/*
- * Write the proper values into the I/O ports following a reset
- */
-static void setup_ports(int card)
-{
-
-	outb((sc_adapter[card]->rambase >> 12), sc_adapter[card]->ioport[EXP_BASE]);
-
-	/* And the IRQ */
-	outb((sc_adapter[card]->interrupt | 0x80),
-	     sc_adapter[card]->ioport[IRQ_SELECT]);
-}
-
-/*
- * Timed function to check the status of a previous reset
- * Must be very fast as this function runs in the context of
- * an interrupt handler.
- *
- * Setup the ioports for the board that were cleared by the reset.
- * Then, check to see if the signate has been set. Next, set the
- * signature to a known value and issue a startproc if needed.
- */
-void sc_check_reset(unsigned long data)
-{
-	unsigned long flags;
-	unsigned long sig;
-	int card = (unsigned int) data;
-
-	pr_debug("%s: check_timer timer called\n",
-		 sc_adapter[card]->devicename);
-
-	/* Setup the io ports */
-	setup_ports(card);
-
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-	outb(sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport],
-	     (sc_adapter[card]->shmem_magic >> 14) | 0x80);
-	sig = (unsigned long) *((unsigned long *)(sc_adapter[card]->rambase + SIG_OFFSET));
-
-	/* check the signature */
-	if (sig == SIGNATURE) {
-		flushreadfifo(card);
-		spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-		/* See if we need to do a startproc */
-		if (sc_adapter[card]->StartOnReset)
-			startproc(card);
-	} else  {
-		pr_debug("%s: No signature yet, waiting another %lu jiffies.\n",
-			 sc_adapter[card]->devicename, CHECKRESET_TIME);
-		mod_timer(&sc_adapter[card]->reset_timer, jiffies + CHECKRESET_TIME);
-		spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-	}
-}
-
-/*
- * Timed function to check the status of a previous reset
- * Must be very fast as this function runs in the context of
- * an interrupt handler.
- *
- * Send check sc_adapter->phystat to see if the channels are up
- * If they are, tell ISDN4Linux that the board is up. If not,
- * tell IADN4Linux that it is up. Always reset the timer to
- * fire again (endless loop).
- */
-void check_phystat(unsigned long data)
-{
-	unsigned long flags;
-	int card = (unsigned int) data;
-
-	pr_debug("%s: Checking status...\n", sc_adapter[card]->devicename);
-	/*
-	 * check the results of the last PhyStat and change only if
-	 * has changed drastically
-	 */
-	if (sc_adapter[card]->nphystat && !sc_adapter[card]->phystat) {   /* All is well */
-		pr_debug("PhyStat transition to RUN\n");
-		pr_info("%s: Switch contacted, transmitter enabled\n",
-			sc_adapter[card]->devicename);
-		indicate_status(card, ISDN_STAT_RUN, 0, NULL);
-	}
-	else if (!sc_adapter[card]->nphystat && sc_adapter[card]->phystat) {   /* All is not well */
-		pr_debug("PhyStat transition to STOP\n");
-		pr_info("%s: Switch connection lost, transmitter disabled\n",
-			sc_adapter[card]->devicename);
-
-		indicate_status(card, ISDN_STAT_STOP, 0, NULL);
-	}
-
-	sc_adapter[card]->phystat = sc_adapter[card]->nphystat;
-
-	/* Reinitialize the timer */
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-	mod_timer(&sc_adapter[card]->stat_timer, jiffies + CHECKSTAT_TIME);
-	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-
-	/* Send a new cePhyStatus message */
-	sendmessage(card, CEPID, ceReqTypePhy, ceReqClass2,
-		    ceReqPhyStatus, 0, 0, NULL);
-}