arm64: dts: ti: k3-am64: Remove PCIe endpoint node

This node is an example node for the PCIe controller in "endpoint" mode.
By default the controller is in "root complex" mode and there is already a
DT node for the same.

Examples should go in the bindings or other documentation.

Remove this node.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240124183659.149119-4-afd@ti.comSigned-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arch/arm64/boot/dts/ti/k3-am64-main.dtsi

@@ -1041,25 +1041,6 @@ pcie0_rc: pcie@f102000 {
 		status = "disabled";
 	};
 
-	pcie0_ep: pcie-ep@f102000 {
-		compatible = "ti,am64-pcie-ep", "ti,j721e-pcie-ep";
-		reg = <0x00 0x0f102000 0x00 0x1000>,
-		      <0x00 0x0f100000 0x00 0x400>,
-		      <0x00 0x0d000000 0x00 0x00800000>,
-		      <0x00 0x68000000 0x00 0x08000000>;
-		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
-		interrupt-names = "link_state";
-		interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
-		ti,syscon-pcie-ctrl = <&main_conf 0x4070>;
-		max-link-speed = <2>;
-		num-lanes = <1>;
-		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 114 0>;
-		clock-names = "fck";
-		max-functions = /bits/ 8 <1>;
-		status = "disabled";
-	};
-
 	epwm0: pwm@23000000 {
 		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
 		#pwm-cells = <3>;

arch/arm64/boot/dts/ti/k3-am642-evm.dts

@@ -705,12 +705,6 @@ &pcie0_rc {
 	num-lanes = <1>;
 };
 
-&pcie0_ep {
-	phys = <&serdes0_pcie_link>;
-	phy-names = "pcie-phy";
-	num-lanes = <1>;
-};
-
 &ecap0 {
 	status = "okay";
 	/* PWM is available on Pin 1 of header J12 */