diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
deleted file mode 100644
index 41907938014cc464f7be5bad00d7da3f99f8c034..0000000000000000000000000000000000000000
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-
-&pm8916_gpios {
-
-	usb_hub_reset_pm: usb-hub-reset-pm {
-		pinconf {
-			pins = "gpio3";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-disable;
-			output-high;
-		};
-	};
-
-	usb_hub_reset_pm_device: usb-hub-reset-pm-device {
-		pinconf {
-			pins = "gpio3";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-		};
-	};
-
-	usb_sw_sel_pm: usb-sw-sel-pm {
-		pinconf {
-			pins = "gpio4";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			power-source = <PM8916_GPIO_VPH>;
-			input-disable;
-			output-high;
-		};
-	};
-
-	usb_sw_sel_pm_device: usb-sw-sel-pm-device {
-		pinconf {
-			pins = "gpio4";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			power-source = <PM8916_GPIO_VPH>;
-			input-disable;
-			output-low;
-		};
-	};
-
-	pm8916_gpios_leds: pm8916-gpios-leds {
-		pinconf {
-			pins = "gpio1", "gpio2";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-		};
-	};
-};
-
-&pm8916_mpps {
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&ls_exp_gpio_f>;
-
-	ls_exp_gpio_f: pm8916-mpp4 {
-		pinconf {
-			pins = "mpp4";
-			function = "digital";
-			output-low;
-			power-source = <PM8916_MPP_L5>;	// 1.8V
-		};
-	};
-
-	pm8916_mpps_leds: pm8916-mpps-leds {
-		pinconf {
-			pins = "mpp2", "mpp3";
-			function = "digital";
-			output-low;
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
deleted file mode 100644
index ac00beec102fa506d2d0ec0b0d2e11f40bb2d68a..0000000000000000000000000000000000000000
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/gpio/gpio.h>
-
-&msmgpio {
-
-	msmgpio_leds: msmgpio-leds {
-		pinconf {
-			pins = "gpio21", "gpio120";
-			function = "gpio";
-			output-low;
-		};
-	};
-
-	usb_id_default: usb-id-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio121";
-		};
-
-		pinconf {
-			pins = "gpio121";
-			drive-strength = <8>;
-			input-enable;
-			bias-pull-up;
-		};
-	};
-
-	adv7533_int_active: adv533-int-active {
-		pinmux {
-			function = "gpio";
-			pins = "gpio31";
-		};
-		pinconf {
-			pins = "gpio31";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	adv7533_int_suspend: adv7533-int-suspend {
-		pinmux {
-			function = "gpio";
-			pins = "gpio31";
-		};
-		pinconf {
-			pins = "gpio31";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	adv7533_switch_active: adv7533-switch-active {
-		pinmux {
-			function = "gpio";
-			pins = "gpio32";
-		};
-		pinconf {
-			pins = "gpio32";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	adv7533_switch_suspend: adv7533-switch-suspend {
-		pinmux {
-			function = "gpio";
-			pins = "gpio32";
-		};
-		pinconf {
-			pins = "gpio32";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	msm_key_volp_n_default: msm-key-volp-n-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio107";
-		};
-		pinconf {
-			pins = "gpio107";
-			drive-strength = <8>;
-			input-enable;
-			bias-pull-up;
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 08c7538b9c9f4fef7ff472a1c1e1c6919bc04ff7..8a4b790aa7ff1f8a6697e68c1eaec97c4cea2743 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -5,10 +5,10 @@
 
 #include "msm8916.dtsi"
 #include "pm8916.dtsi"
-#include "apq8016-sbc-soc-pins.dtsi"
-#include "apq8016-sbc-pmic-pins.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 #include <dt-bindings/sound/apq8016-lpass.h>
 
 /*
@@ -777,3 +777,157 @@ l18 {
 		regulator-max-microvolt = <3337000>;
 	};
 };
+
+&msmgpio {
+	msmgpio_leds: msmgpio-leds {
+		pinconf {
+			pins = "gpio21", "gpio120";
+			function = "gpio";
+			output-low;
+		};
+	};
+
+	usb_id_default: usb-id-default {
+		pinmux {
+			function = "gpio";
+			pins = "gpio121";
+		};
+
+		pinconf {
+			pins = "gpio121";
+			drive-strength = <8>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	adv7533_int_active: adv533-int-active {
+		pinmux {
+			function = "gpio";
+			pins = "gpio31";
+		};
+		pinconf {
+			pins = "gpio31";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	adv7533_int_suspend: adv7533-int-suspend {
+		pinmux {
+			function = "gpio";
+			pins = "gpio31";
+		};
+		pinconf {
+			pins = "gpio31";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	adv7533_switch_active: adv7533-switch-active {
+		pinmux {
+			function = "gpio";
+			pins = "gpio32";
+		};
+		pinconf {
+			pins = "gpio32";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	adv7533_switch_suspend: adv7533-switch-suspend {
+		pinmux {
+			function = "gpio";
+			pins = "gpio32";
+		};
+		pinconf {
+			pins = "gpio32";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	msm_key_volp_n_default: msm-key-volp-n-default {
+		pinmux {
+			function = "gpio";
+			pins = "gpio107";
+		};
+		pinconf {
+			pins = "gpio107";
+			drive-strength = <8>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
+
+&pm8916_gpios {
+	usb_hub_reset_pm: usb-hub-reset-pm {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-disable;
+			output-high;
+		};
+	};
+
+	usb_hub_reset_pm_device: usb-hub-reset-pm-device {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+		};
+	};
+
+	usb_sw_sel_pm: usb-sw-sel-pm {
+		pinconf {
+			pins = "gpio4";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			power-source = <PM8916_GPIO_VPH>;
+			input-disable;
+			output-high;
+		};
+	};
+
+	usb_sw_sel_pm_device: usb-sw-sel-pm-device {
+		pinconf {
+			pins = "gpio4";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			power-source = <PM8916_GPIO_VPH>;
+			input-disable;
+			output-low;
+		};
+	};
+
+	pm8916_gpios_leds: pm8916-gpios-leds {
+		pinconf {
+			pins = "gpio1", "gpio2";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+		};
+	};
+};
+
+&pm8916_mpps {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f>;
+
+	ls_exp_gpio_f: pm8916-mpp4 {
+		pinconf {
+			pins = "mpp4";
+			function = "digital";
+			output-low;
+			power-source = <PM8916_MPP_L5>;	// 1.8V
+		};
+	};
+
+	pm8916_mpps_leds: pm8916-mpps-leds {
+		pinconf {
+			pins = "mpp2", "mpp3";
+			function = "digital";
+			output-low;
+		};
+	};
+};