ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi

Add the common parts for the dk04 boards.
Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi

+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256MB */
+	};
+
+	soc {
+		pinctrl@1000000 {
+			serial_0_pins: serial0-pinmux {
+				pins = "gpio16", "gpio17";
+				function = "blsp_uart0";
+				bias-disable;
+			};
+
+			serial_1_pins: serial1-pinmux {
+				pins = "gpio8", "gpio9",
+					"gpio10", "gpio11";
+				function = "blsp_uart1";
+				bias-disable;
+			};
+
+			spi_0_pins: spi-0-pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio13", "gpio14", "gpio15";
+					bias-disable;
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio12";
+					bias-disable;
+					output-high;
+				};
+			};
+
+			i2c_0_pins: i2c-0-pinmux {
+				pins = "gpio20", "gpio21";
+				function = "blsp_i2c0";
+				bias-disable;
+			};
+
+			nand_pins: nand-pins {
+				pins = "gpio53", "gpio55", "gpio56",
+					"gpio57", "gpio58", "gpio59",
+					"gpio60", "gpio62", "gpio63",
+					"gpio64", "gpio65", "gpio66",
+					"gpio67", "gpio68", "gpio69";
+				function = "qpic";
+			};
+		};
+
+		serial@78af000 {
+			pinctrl-0 = <&serial_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		serial@78b0000 {
+			pinctrl-0 = <&serial_1_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		dma@7884000 {
+			status = "ok";
+		};
+
+		spi@78b5000 { /* BLSP1 QUP1 */
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+			cs-gpios = <&tlmm 12 0>;
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				spi-max-frequency = <24000000>;
+			};
+		};
+
+		pci@40000000 {
+			status = "ok";
+			perst-gpio = <&tlmm 38 0x1>;
+		};
+
+		qpic-nand@79b0000 {
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+		};
+	};
+};

arch/arm/boot/dts/qcom-ipq4019.dtsi

@@ -323,7 +323,7 @@ blsp1_uart1: serial@78af000 {
 			dma-names = "rx", "tx";
 		};
 
-		serial@78b0000 {
+		blsp1_uart2: serial@78b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78b0000 0x200>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;