Skip to content

L
linux
Commit 78814465 authored by Manuel Lauss's avatar Manuel Lauss Committed by Ralf Baechle
Browse files
Options

MIPS: Alchemy: Stop IRQ name sharing 

Eliminate the sharing of IRQ names among the differenct Alchemy
variants.  IRQ numbers need no longer be hidden behind a
CONFIG_SOC_AU1XXX symbol: step 1 in my quest to make the Alchemy
code less reliant on a hardcoded subtype.

This patch also renames the GPIO irq number constants. It's really
an interrupt line, NOT a GPIO number!

Code which relied on certain irq numbers to have the same name
across all supported cpu subtypes is changed to determine current
cpu subtype at runtime; in some places this isn't possible so
a "compat" symbol is used.

Run-tested on DB1200.
Signed-off-by: default avatarManuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 93e9cd84
Show whitespace changes
Inline Side-by-side
Showing with 743 additions and 665 deletions
arch/mips/alchemy/common/dbdma.c
View file @ 78814465
......@@ -30,6 +30,7 @@
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
......@@ -58,7 +59,6 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
static int dbdma_initialized;
static void au1xxx_dbdma_init(void);
static dbdev_tab_t dbdev_tab[] = {
#ifdef CONFIG_SOC_AU1550
......@@ -250,8 +250,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
* which can't be done successfully during board set up.
*/
if (!dbdma_initialized)
au1xxx_dbdma_init();
dbdma_initialized = 1;
return 0;
stp = find_dbdev_id(srcid);
if (stp == NULL)
......@@ -871,28 +870,6 @@ static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
return IRQ_RETVAL(1);
}
static void au1xxx_dbdma_init(void)
{
int irq_nr;
dbdma_gptr->ddma_config = 0;
dbdma_gptr->ddma_throttle = 0;
dbdma_gptr->ddma_inten = 0xffff;
au_sync();
#if defined(CONFIG_SOC_AU1550)
irq_nr = AU1550_DDMA_INT;
#elif defined(CONFIG_SOC_AU1200)
irq_nr = AU1200_DDMA_INT;
#else
#error Unknown Au1x00 SOC
#endif
if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
"Au1xxx dbdma", (void *)dbdma_gptr))
printk(KERN_ERR "Can't get 1550 dbdma irq");
}
void au1xxx_dbdma_dump(u32 chanid)
{
chan_tab_t *ctp;
......@@ -1041,4 +1018,38 @@ void au1xxx_dbdma_resume(void)
}
}
#endif /* CONFIG_PM */
static int __init au1xxx_dbdma_init(void)
{
int irq_nr, ret;
dbdma_gptr->ddma_config = 0;
dbdma_gptr->ddma_throttle = 0;
dbdma_gptr->ddma_inten = 0xffff;
au_sync();
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1550:
irq_nr = AU1550_DDMA_INT;
break;
case ALCHEMY_CPU_AU1200:
irq_nr = AU1200_DDMA_INT;
break;
default:
return -ENODEV;
}
ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
"Au1xxx dbdma", (void *)dbdma_gptr);
if (ret)
printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
else {
dbdma_initialized = 1;
printk(KERN_INFO "Alchemy DBDMA initialized\n");
}
return ret;
}
subsys_initcall(au1xxx_dbdma_init);
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
arch/mips/alchemy/common/dma.c
View file @ 78814465
......@@ -29,6 +29,8 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
......@@ -188,17 +190,14 @@ int request_au1000_dma(int dev_id, const char *dev_str,
dev = &dma_dev_table[dev_id];
if (irqhandler) {
chan->irq = AU1000_DMA_INT_BASE + i;
chan->irq_dev = irq_dev_id;
ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
chan->irq_dev);
if (ret) {
chan->irq = 0;
chan->irq_dev = NULL;
return ret;
}
} else {
chan->irq = 0;
chan->irq_dev = NULL;
}
......@@ -226,13 +225,40 @@ void free_au1000_dma(unsigned int dmanr)
}
disable_dma(dmanr);
if (chan->irq)
if (chan->irq_dev)
free_irq(chan->irq, chan->irq_dev);
chan->irq = 0;
chan->irq_dev = NULL;
chan->dev_id = -1;
}
EXPORT_SYMBOL(free_au1000_dma);
static int __init au1000_dma_init(void)
{
int base, i;
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1000:
base = AU1000_DMA_INT_BASE;
break;
case ALCHEMY_CPU_AU1500:
base = AU1500_DMA_INT_BASE;
break;
case ALCHEMY_CPU_AU1100:
base = AU1100_DMA_INT_BASE;
break;
default:
goto out;
}
for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
au1000_dma_table[i].irq = base + i;
printk(KERN_INFO "Alchemy DMA initialized\n");
out:
return 0;
}
arch_initcall(au1000_dma_init);
#endif /* AU1000 AU1500 AU1100 */
arch/mips/alchemy/common/irq.c
View file @ 78814465
......@@ -88,34 +88,34 @@ struct au1xxx_irqmap {
#elif defined(CONFIG_SOC_AU1500)
{ AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
#elif defined(CONFIG_SOC_AU1100)
......@@ -123,33 +123,33 @@ struct au1xxx_irqmap {
{ AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
#elif defined(CONFIG_SOC_AU1550)
......@@ -167,14 +167,14 @@ struct au1xxx_irqmap {
{ AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
......@@ -195,14 +195,14 @@ struct au1xxx_irqmap {
{ AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
......@@ -316,7 +316,7 @@ static void au1x_ic1_unmask(unsigned int irq_nr)
* nowhere in the current kernel sources is it disabled. --mlau
*/
#if defined(CONFIG_MIPS_PB1000)
if (irq_nr == AU1000_GPIO_15)
if (irq_nr == AU1000_GPIO15_INT)
au_writel(0x4000, PB1000_MDR); /* enable int */
#endif
au_sync();
......@@ -388,11 +388,13 @@ static void au1x_ic1_maskack(unsigned int irq_nr)
static int au1x_ic1_setwake(unsigned int irq, unsigned int on)
{
unsigned int bit = irq - AU1000_INTC1_INT_BASE;
int bit = irq - AU1000_INTC1_INT_BASE;
unsigned long wakemsk, flags;
/* only GPIO 0-7 can act as wakeup source: */
if ((irq < AU1000_GPIO_0) || (irq > AU1000_GPIO_7))
/* only GPIO 0-7 can act as wakeup source. Fortunately these
* are wired up identically on all supported variants.
*/
if ((bit < 0) || (bit > 7))
return -EINVAL;
local_irq_save(flags);
......
arch/mips/alchemy/common/platform.c
View file @ 78814465
......@@ -73,8 +73,8 @@ static struct resource au1xxx_usb_ohci_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1000_USB_HOST_INT,
.end = AU1000_USB_HOST_INT,
.start = FOR_PLATFORM_C_USB_HOST_INT,
.end = FOR_PLATFORM_C_USB_HOST_INT,
.flags = IORESOURCE_IRQ,
},
};
......@@ -132,8 +132,8 @@ static struct resource au1xxx_usb_ehci_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1000_USB_HOST_INT,
.end = AU1000_USB_HOST_INT,
.start = AU1200_USB_INT,
.end = AU1200_USB_INT,
.flags = IORESOURCE_IRQ,
},
};
......
arch/mips/alchemy/common/time.c
View file @ 78814465
/*
* Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
* Copyright (C) 2008-2009 Manuel Lauss <manuel.lauss@gmail.com>
*
* Previous incarnations were:
* Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
......@@ -85,7 +85,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
.name = "rtcmatch2",
.features = CLOCK_EVT_FEAT_ONESHOT,
.rating = 100,
.irq = AU1000_RTC_MATCH2_INT,
.set_next_event = au1x_rtcmatch2_set_next_event,
.set_mode = au1x_rtcmatch2_set_mode,
.cpumask = cpu_all_mask,
......@@ -98,11 +97,13 @@ static struct irqaction au1x_rtcmatch2_irqaction = {
.dev_id = &au1x_rtcmatch2_clockdev,
};
void __init plat_time_init(void)
static int __init alchemy_time_init(unsigned int m2int)
{
struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
unsigned long t;
au1x_rtcmatch2_clockdev.irq = m2int;
/* Check if firmware (YAMON, ...) has enabled 32kHz and clock
* has been detected. If so install the rtcmatch2 clocksource,
* otherwise don't bother. Note that both bits being set is by
......@@ -148,13 +149,18 @@ void __init plat_time_init(void)
cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */
clockevents_register_device(cd);
setup_irq(AU1000_RTC_MATCH2_INT, &au1x_rtcmatch2_irqaction);
setup_irq(m2int, &au1x_rtcmatch2_irqaction);
printk(KERN_INFO "Alchemy clocksource installed\n");
return;
return 0;
cntr_err:
return -1;
}
static void __init alchemy_setup_c0timer(void)
{
/*
* MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this
* function is called. Because the Alchemy counters are unusable
......@@ -166,3 +172,22 @@ void __init plat_time_init(void)
r4k_clockevent_init();
init_r4k_clocksource();
}
static int alchemy_m2inttab[] __initdata = {
AU1000_RTC_MATCH2_INT,
AU1500_RTC_MATCH2_INT,
AU1100_RTC_MATCH2_INT,
AU1550_RTC_MATCH2_INT,
AU1200_RTC_MATCH2_INT,
};
void __init plat_time_init(void)
{
int t;
t = alchemy_get_cputype();
if (t == ALCHEMY_CPU_UNKNOWN)
alchemy_setup_c0timer();
else if (alchemy_time_init(alchemy_m2inttab[t]))
alchemy_setup_c0timer();
}
arch/mips/alchemy/devboards/db1x00/board_setup.c
View file @ 78814465
......@@ -39,32 +39,32 @@
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371 */
[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
[11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */
[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741 */
[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_MIRAGE
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
[12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
[13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
[11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */
[12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
};
#endif
#ifdef CONFIG_MIPS_DB1550
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
[11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */
[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
#endif
......@@ -185,21 +185,35 @@ void __init board_setup(void)
static int __init db1x00_init_irq(void)
{
#if defined(CONFIG_MIPS_MIRAGE)
set_irq_type(AU1000_GPIO_7, IRQF_TRIGGER_RISING); /* TS pendown */
set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */
#elif defined(CONFIG_MIPS_DB1550)
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW); /* CARD1# */
set_irq_type(AU1000_GPIO_21, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1000_GPIO_22, IRQF_TRIGGER_LOW); /* STSCHG1# */
#else
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1000_GPIO_2, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW); /* CARD1# */
set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1000_GPIO_4, IRQF_TRIGGER_LOW); /* STSCHG1# */
set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
#elif defined(CONFIG_MIPS_DB1500)
set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
#elif defined(CONFIG_MIPS_DB1100)
set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
#elif defined(CONFIG_MIPS_DB1000)
set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
#endif
return 0;
}
......
arch/mips/alchemy/devboards/db1x00/platform.c
View file @ 78814465
......@@ -24,32 +24,46 @@
#include <asm/mach-au1x00/au1xxx.h>
#include "../platform.h"
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
#define DB1XXX_HAS_PCMCIA
#endif
/* DB1xxx PCMCIA interrupt sources:
* CD0/1 GPIO0/3
* STSCHG0/1 GPIO1/4
* CARD0/1 GPIO2/5
* Db1550: 0/1, 21/22, 3/5
*/
#ifndef CONFIG_MIPS_DB1550
/* Db1000, Db1100, Db1500 */
#define DB1XXX_PCMCIA_CD0 AU1000_GPIO_0
#define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO_1
#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO_2
#define DB1XXX_PCMCIA_CD1 AU1000_GPIO_3
#define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO_4
#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO_5
#define DB1XXX_HAS_PCMCIA
#if defined(CONFIG_MIPS_DB1000)
#define DB1XXX_PCMCIA_CD0 AU1000_GPIO0_INT
#define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO1_INT
#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO2_INT
#define DB1XXX_PCMCIA_CD1 AU1000_GPIO3_INT
#define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO4_INT
#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO5_INT
#elif defined(CONFIG_MIPS_DB1100)
#define DB1XXX_PCMCIA_CD0 AU1100_GPIO0_INT
#define DB1XXX_PCMCIA_STSCHG0 AU1100_GPIO1_INT
#define DB1XXX_PCMCIA_CARD0 AU1100_GPIO2_INT
#define DB1XXX_PCMCIA_CD1 AU1100_GPIO3_INT
#define DB1XXX_PCMCIA_STSCHG1 AU1100_GPIO4_INT
#define DB1XXX_PCMCIA_CARD1 AU1100_GPIO5_INT
#elif defined(CONFIG_MIPS_DB1500)
#define DB1XXX_PCMCIA_CD0 AU1500_GPIO0_INT
#define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO1_INT
#define DB1XXX_PCMCIA_CARD0 AU1500_GPIO2_INT
#define DB1XXX_PCMCIA_CD1 AU1500_GPIO3_INT
#define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO4_INT
#define DB1XXX_PCMCIA_CARD1 AU1500_GPIO5_INT
#elif defined(CONFIG_MIPS_DB1550)
#define DB1XXX_PCMCIA_CD0 AU1550_GPIO0_INT
#define DB1XXX_PCMCIA_STSCHG0 AU1550_GPIO21_INT
#define DB1XXX_PCMCIA_CARD0 AU1550_GPIO3_INT
#define DB1XXX_PCMCIA_CD1 AU1550_GPIO1_INT
#define DB1XXX_PCMCIA_STSCHG1 AU1550_GPIO22_INT
#define DB1XXX_PCMCIA_CARD1 AU1550_GPIO5_INT
#else
#define DB1XXX_PCMCIA_CD0 AU1000_GPIO_0
#define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO_21
#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO_3
#define DB1XXX_PCMCIA_CD1 AU1000_GPIO_1
#define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO_22
#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO_5
/* other board: no PCMCIA */
#undef DB1XXX_HAS_PCMCIA
#endif
static int __init db1xxx_dev_init(void)
......
arch/mips/alchemy/devboards/pb1000/board_setup.c
View file @ 78814465
......@@ -186,7 +186,7 @@ void __init board_setup(void)
static int __init pb1000_init_irq(void)
{
set_irq_type(AU1000_GPIO_15, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(pb1000_init_irq);
arch/mips/alchemy/devboards/pb1100/board_setup.c
View file @ 78814465
......@@ -147,10 +147,10 @@ void __init board_setup(void)
static int __init pb1100_init_irq(void)
{
set_irq_type(AU1000_GPIO_9, IRQF_TRIGGER_LOW); /* PCCD# */
set_irq_type(AU1000_GPIO_10, IRQF_TRIGGER_LOW); /* PCSTSCHG# */
set_irq_type(AU1000_GPIO_11, IRQF_TRIGGER_LOW); /* PCCard# */
set_irq_type(AU1000_GPIO_13, IRQF_TRIGGER_LOW); /* DC_IRQ# */
set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */
set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */
set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */
set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */
return 0;
}
......
arch/mips/alchemy/devboards/pb1100/platform.c
View file @ 78814465
......@@ -33,9 +33,9 @@ static int __init pb1100_dev_init(void)
PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_IO_PSEUDO_PHYS,
PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
AU1000_GPIO_11, /* card */
AU1000_GPIO_9, /* insert */
/*AU1000_GPIO_10*/0, /* stschg */
AU1100_GPIO11_INT, /* card */
AU1100_GPIO9_INT, /* insert */
/*AU1100_GPIO10_INT*/0, /* stschg */
0, /* eject */
0); /* id */
return 0;
......
arch/mips/alchemy/devboards/pb1200/board_setup.c
View file @ 78814465
......@@ -171,8 +171,8 @@ static int __init pb1200_init_irq(void)
}
#endif
set_irq_type(AU1000_GPIO_7, IRQF_TRIGGER_LOW);
bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1000_GPIO_7);
set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT);
return 0;
}
......
arch/mips/alchemy/devboards/pb1500/board_setup.c
View file @ 78814465
......@@ -35,8 +35,8 @@
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT370 */
[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
};
......@@ -155,14 +155,14 @@ void __init board_setup(void)
static int __init pb1500_init_irq(void)
{
set_irq_type(AU1000_GPIO_9, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1000_GPIO_10, IRQF_TRIGGER_LOW); /* CARD0 */
set_irq_type(AU1000_GPIO_11, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW); /* CARD0 */
set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
return 0;
}
......
arch/mips/alchemy/devboards/pb1500/platform.c
View file @ 78814465
......@@ -32,9 +32,9 @@ static int __init pb1500_dev_init(void)
PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_IO_PSEUDO_PHYS,
PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
AU1000_GPIO_11, /* card */
AU1000_GPIO_9, /* insert */
/*AU1000_GPIO_10*/0, /* stschg */
AU1500_GPIO11_INT, /* card */
AU1500_GPIO9_INT, /* insert */
/*AU1500_GPIO10_INT*/0, /* stschg */
0, /* eject */
0); /* id */
return 0;
......
arch/mips/alchemy/devboards/pb1550/board_setup.c
View file @ 78814465
......@@ -39,8 +39,8 @@
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
const char *get_system_type(void)
......@@ -89,9 +89,9 @@ void __init board_setup(void)
static int __init pb1550_init_irq(void)
{
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_201_205, IRQF_TRIGGER_HIGH);
set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH);
/* enable both PCMCIA card irqs in the shared line */
alchemy_gpio2_enable_int(201);
......
arch/mips/alchemy/devboards/pb1550/platform.c
View file @ 78814465
......@@ -40,8 +40,8 @@ static int __init pb1550_dev_init(void)
PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_IO_PSEUDO_PHYS,
PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
AU1500_GPIO_201_205,
AU1000_GPIO_0,
AU1550_GPIO201_205_INT,
AU1550_GPIO0_INT,
0,
0,
0);
......@@ -52,8 +52,8 @@ static int __init pb1550_dev_init(void)
PCMCIA_MEM_PSEUDO_PHYS + 0x00840000 - 1,
PCMCIA_IO_PSEUDO_PHYS + 0x00800000,
PCMCIA_IO_PSEUDO_PHYS + 0x00801000 - 1,
AU1500_GPIO_201_205,
AU1000_GPIO_1,
AU1550_GPIO201_205_INT,
AU1550_GPIO1_INT,
0,
0,
1);
......
arch/mips/alchemy/mtx-1/board_setup.c
View file @ 78814465
......@@ -37,14 +37,14 @@
#include <prom.h>
char irq_tab_alchemy[][5] __initdata = {
[0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
[1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
[2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
[3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
[4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
[5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
[6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
[7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
[1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
[2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
[3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
[4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
[5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
[6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
[7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
......@@ -124,11 +124,11 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
static int __init mtx1_init_irq(void)
{
set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
return 0;
}
......
arch/mips/alchemy/xxs1500/board_setup.c
View file @ 78814465
......@@ -80,19 +80,19 @@ void __init board_setup(void)
static int __init xxs1500_init_irq(void)
{
set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_207, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_2, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_4, IRQF_TRIGGER_LOW); /* CF interrupt */
set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */
set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW);
return 0;
}
......
arch/mips/include/asm/mach-au1x00/au1000.h
View file @ 78814465
......@@ -174,6 +174,333 @@ void au_sleep(void);
void save_au1xxx_intctl(void);
void restore_au1xxx_intctl(void);
/* SOC Interrupt numbers */
#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31)
#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1)
#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31)
#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST
enum soc_au1000_ints {
AU1000_FIRST_INT = AU1000_INTC0_INT_BASE,
AU1000_UART0_INT = AU1000_FIRST_INT,
AU1000_UART1_INT,
AU1000_UART2_INT,
AU1000_UART3_INT,
AU1000_SSI0_INT,
AU1000_SSI1_INT,
AU1000_DMA_INT_BASE,
AU1000_TOY_INT = AU1000_FIRST_INT + 14,
AU1000_TOY_MATCH0_INT,
AU1000_TOY_MATCH1_INT,
AU1000_TOY_MATCH2_INT,
AU1000_RTC_INT,
AU1000_RTC_MATCH0_INT,
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
AU1000_IRDA_TX_INT,
AU1000_IRDA_RX_INT,
AU1000_USB_DEV_REQ_INT,
AU1000_USB_DEV_SUS_INT,
AU1000_USB_HOST_INT,
AU1000_ACSYNC_INT,
AU1000_MAC0_DMA_INT,
AU1000_MAC1_DMA_INT,
AU1000_I2S_UO_INT,
AU1000_AC97C_INT,
AU1000_GPIO0_INT,
AU1000_GPIO1_INT,
AU1000_GPIO2_INT,
AU1000_GPIO3_INT,
AU1000_GPIO4_INT,
AU1000_GPIO5_INT,
AU1000_GPIO6_INT,
AU1000_GPIO7_INT,
AU1000_GPIO8_INT,
AU1000_GPIO9_INT,
AU1000_GPIO10_INT,
AU1000_GPIO11_INT,
AU1000_GPIO12_INT,
AU1000_GPIO13_INT,
AU1000_GPIO14_INT,
AU1000_GPIO15_INT,
AU1000_GPIO16_INT,
AU1000_GPIO17_INT,
AU1000_GPIO18_INT,
AU1000_GPIO19_INT,
AU1000_GPIO20_INT,
AU1000_GPIO21_INT,
AU1000_GPIO22_INT,
AU1000_GPIO23_INT,
AU1000_GPIO24_INT,
AU1000_GPIO25_INT,
AU1000_GPIO26_INT,
AU1000_GPIO27_INT,
AU1000_GPIO28_INT,
AU1000_GPIO29_INT,
AU1000_GPIO30_INT,
AU1000_GPIO31_INT,
};
enum soc_au1100_ints {
AU1100_FIRST_INT = AU1000_INTC0_INT_BASE,
AU1100_UART0_INT = AU1100_FIRST_INT,
AU1100_UART1_INT,
AU1100_SD_INT,
AU1100_UART3_INT,
AU1100_SSI0_INT,
AU1100_SSI1_INT,
AU1100_DMA_INT_BASE,
AU1100_TOY_INT = AU1100_FIRST_INT + 14,
AU1100_TOY_MATCH0_INT,
AU1100_TOY_MATCH1_INT,
AU1100_TOY_MATCH2_INT,
AU1100_RTC_INT,
AU1100_RTC_MATCH0_INT,
AU1100_RTC_MATCH1_INT,
AU1100_RTC_MATCH2_INT,
AU1100_IRDA_TX_INT,
AU1100_IRDA_RX_INT,
AU1100_USB_DEV_REQ_INT,
AU1100_USB_DEV_SUS_INT,
AU1100_USB_HOST_INT,
AU1100_ACSYNC_INT,
AU1100_MAC0_DMA_INT,
AU1100_GPIO208_215_INT,
AU1100_LCD_INT,
AU1100_AC97C_INT,
AU1100_GPIO0_INT,
AU1100_GPIO1_INT,
AU1100_GPIO2_INT,
AU1100_GPIO3_INT,
AU1100_GPIO4_INT,
AU1100_GPIO5_INT,
AU1100_GPIO6_INT,
AU1100_GPIO7_INT,
AU1100_GPIO8_INT,
AU1100_GPIO9_INT,
AU1100_GPIO10_INT,
AU1100_GPIO11_INT,
AU1100_GPIO12_INT,
AU1100_GPIO13_INT,
AU1100_GPIO14_INT,
AU1100_GPIO15_INT,
AU1100_GPIO16_INT,
AU1100_GPIO17_INT,
AU1100_GPIO18_INT,
AU1100_GPIO19_INT,
AU1100_GPIO20_INT,
AU1100_GPIO21_INT,
AU1100_GPIO22_INT,
AU1100_GPIO23_INT,
AU1100_GPIO24_INT,
AU1100_GPIO25_INT,
AU1100_GPIO26_INT,
AU1100_GPIO27_INT,
AU1100_GPIO28_INT,
AU1100_GPIO29_INT,
AU1100_GPIO30_INT,
AU1100_GPIO31_INT,
};
enum soc_au1500_ints {
AU1500_FIRST_INT = AU1000_INTC0_INT_BASE,
AU1500_UART0_INT = AU1500_FIRST_INT,
AU1500_PCI_INTA,
AU1500_PCI_INTB,
AU1500_UART3_INT,
AU1500_PCI_INTC,
AU1500_PCI_INTD,
AU1500_DMA_INT_BASE,
AU1500_TOY_INT = AU1500_FIRST_INT + 14,
AU1500_TOY_MATCH0_INT,
AU1500_TOY_MATCH1_INT,
AU1500_TOY_MATCH2_INT,
AU1500_RTC_INT,
AU1500_RTC_MATCH0_INT,
AU1500_RTC_MATCH1_INT,
AU1500_RTC_MATCH2_INT,
AU1500_PCI_ERR_INT,
AU1500_RESERVED_INT,
AU1500_USB_DEV_REQ_INT,
AU1500_USB_DEV_SUS_INT,
AU1500_USB_HOST_INT,
AU1500_ACSYNC_INT,
AU1500_MAC0_DMA_INT,
AU1500_MAC1_DMA_INT,
AU1500_AC97C_INT = AU1500_FIRST_INT + 31,
AU1500_GPIO0_INT,
AU1500_GPIO1_INT,
AU1500_GPIO2_INT,
AU1500_GPIO3_INT,
AU1500_GPIO4_INT,
AU1500_GPIO5_INT,
AU1500_GPIO6_INT,
AU1500_GPIO7_INT,
AU1500_GPIO8_INT,
AU1500_GPIO9_INT,
AU1500_GPIO10_INT,
AU1500_GPIO11_INT,
AU1500_GPIO12_INT,
AU1500_GPIO13_INT,
AU1500_GPIO14_INT,
AU1500_GPIO15_INT,
AU1500_GPIO200_INT,
AU1500_GPIO201_INT,
AU1500_GPIO202_INT,
AU1500_GPIO203_INT,
AU1500_GPIO20_INT,
AU1500_GPIO204_INT,
AU1500_GPIO205_INT,
AU1500_GPIO23_INT,
AU1500_GPIO24_INT,
AU1500_GPIO25_INT,
AU1500_GPIO26_INT,
AU1500_GPIO27_INT,
AU1500_GPIO28_INT,
AU1500_GPIO206_INT,
AU1500_GPIO207_INT,
AU1500_GPIO208_215_INT,
};
enum soc_au1550_ints {
AU1550_FIRST_INT = AU1000_INTC0_INT_BASE,
AU1550_UART0_INT = AU1550_FIRST_INT,
AU1550_PCI_INTA,
AU1550_PCI_INTB,
AU1550_DDMA_INT,
AU1550_CRYPTO_INT,
AU1550_PCI_INTC,
AU1550_PCI_INTD,
AU1550_PCI_RST_INT,
AU1550_UART1_INT,
AU1550_UART3_INT,
AU1550_PSC0_INT,
AU1550_PSC1_INT,
AU1550_PSC2_INT,
AU1550_PSC3_INT,
AU1550_TOY_INT,
AU1550_TOY_MATCH0_INT,
AU1550_TOY_MATCH1_INT,
AU1550_TOY_MATCH2_INT,
AU1550_RTC_INT,
AU1550_RTC_MATCH0_INT,
AU1550_RTC_MATCH1_INT,
AU1550_RTC_MATCH2_INT,
AU1550_NAND_INT = AU1550_FIRST_INT + 23,
AU1550_USB_DEV_REQ_INT,
AU1550_USB_DEV_SUS_INT,
AU1550_USB_HOST_INT,
AU1550_MAC0_DMA_INT,
AU1550_MAC1_DMA_INT,
AU1550_GPIO0_INT = AU1550_FIRST_INT + 32,
AU1550_GPIO1_INT,
AU1550_GPIO2_INT,
AU1550_GPIO3_INT,
AU1550_GPIO4_INT,
AU1550_GPIO5_INT,
AU1550_GPIO6_INT,
AU1550_GPIO7_INT,
AU1550_GPIO8_INT,
AU1550_GPIO9_INT,
AU1550_GPIO10_INT,
AU1550_GPIO11_INT,
AU1550_GPIO12_INT,
AU1550_GPIO13_INT,
AU1550_GPIO14_INT,
AU1550_GPIO15_INT,
AU1550_GPIO200_INT,
AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */
AU1550_GPIO16_INT,
AU1550_GPIO17_INT,
AU1550_GPIO20_INT,
AU1550_GPIO21_INT,
AU1550_GPIO22_INT,
AU1550_GPIO23_INT,
AU1550_GPIO24_INT,
AU1550_GPIO25_INT,
AU1550_GPIO26_INT,
AU1550_GPIO27_INT,
AU1550_GPIO28_INT,
AU1550_GPIO206_INT,
AU1550_GPIO207_INT,
AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */
};
enum soc_au1200_ints {
AU1200_FIRST_INT = AU1000_INTC0_INT_BASE,
AU1200_UART0_INT = AU1200_FIRST_INT,
AU1200_SWT_INT,
AU1200_SD_INT,
AU1200_DDMA_INT,
AU1200_MAE_BE_INT,
AU1200_GPIO200_INT,
AU1200_GPIO201_INT,
AU1200_GPIO202_INT,
AU1200_UART1_INT,
AU1200_MAE_FE_INT,
AU1200_PSC0_INT,
AU1200_PSC1_INT,
AU1200_AES_INT,
AU1200_CAMERA_INT,
AU1200_TOY_INT,
AU1200_TOY_MATCH0_INT,
AU1200_TOY_MATCH1_INT,
AU1200_TOY_MATCH2_INT,
AU1200_RTC_INT,
AU1200_RTC_MATCH0_INT,
AU1200_RTC_MATCH1_INT,
AU1200_RTC_MATCH2_INT,
AU1200_GPIO203_INT,
AU1200_NAND_INT,
AU1200_GPIO204_INT,
AU1200_GPIO205_INT,
AU1200_GPIO206_INT,
AU1200_GPIO207_INT,
AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */
AU1200_USB_INT,
AU1200_LCD_INT,
AU1200_MAE_BOTH_INT,
AU1200_GPIO0_INT,
AU1200_GPIO1_INT,
AU1200_GPIO2_INT,
AU1200_GPIO3_INT,
AU1200_GPIO4_INT,
AU1200_GPIO5_INT,
AU1200_GPIO6_INT,
AU1200_GPIO7_INT,
AU1200_GPIO8_INT,
AU1200_GPIO9_INT,
AU1200_GPIO10_INT,
AU1200_GPIO11_INT,
AU1200_GPIO12_INT,
AU1200_GPIO13_INT,
AU1200_GPIO14_INT,
AU1200_GPIO15_INT,
AU1200_GPIO16_INT,
AU1200_GPIO17_INT,
AU1200_GPIO18_INT,
AU1200_GPIO19_INT,
AU1200_GPIO20_INT,
AU1200_GPIO21_INT,
AU1200_GPIO22_INT,
AU1200_GPIO23_INT,
AU1200_GPIO24_INT,
AU1200_GPIO25_INT,
AU1200_GPIO26_INT,
AU1200_GPIO27_INT,
AU1200_GPIO28_INT,
AU1200_GPIO29_INT,
AU1200_GPIO30_INT,
AU1200_GPIO31_INT,
};
#endif /* !defined (_LANGUAGE_ASSEMBLY) */
/*
......@@ -565,70 +892,9 @@ void restore_au1xxx_intctl(void);
#define IC1_TESTBIT 0xB1800080
/* Interrupt Numbers */
/* Au1000 */
#ifdef CONFIG_SOC_AU1000
enum soc_au1000_ints {
AU1000_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
AU1000_UART0_INT = AU1000_FIRST_INT,
AU1000_UART1_INT, /* au1000 */
AU1000_UART2_INT, /* au1000 */
AU1000_UART3_INT,
AU1000_SSI0_INT, /* au1000 */
AU1000_SSI1_INT, /* au1000 */
AU1000_DMA_INT_BASE,
AU1000_TOY_INT = AU1000_FIRST_INT + 14,
AU1000_TOY_MATCH0_INT,
AU1000_TOY_MATCH1_INT,
AU1000_TOY_MATCH2_INT,
AU1000_RTC_INT,
AU1000_RTC_MATCH0_INT,
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
AU1000_IRDA_TX_INT, /* au1000 */
AU1000_IRDA_RX_INT, /* au1000 */
AU1000_USB_DEV_REQ_INT,
AU1000_USB_DEV_SUS_INT,
AU1000_USB_HOST_INT,
AU1000_ACSYNC_INT,
AU1000_MAC0_DMA_INT,
AU1000_MAC1_DMA_INT,
AU1000_I2S_UO_INT, /* au1000 */
AU1000_AC97C_INT,
AU1000_GPIO_0,
AU1000_GPIO_1,
AU1000_GPIO_2,
AU1000_GPIO_3,
AU1000_GPIO_4,
AU1000_GPIO_5,
AU1000_GPIO_6,
AU1000_GPIO_7,
AU1000_GPIO_8,
AU1000_GPIO_9,
AU1000_GPIO_10,
AU1000_GPIO_11,
AU1000_GPIO_12,
AU1000_GPIO_13,
AU1000_GPIO_14,
AU1000_GPIO_15,
AU1000_GPIO_16,
AU1000_GPIO_17,
AU1000_GPIO_18,
AU1000_GPIO_19,
AU1000_GPIO_20,
AU1000_GPIO_21,
AU1000_GPIO_22,
AU1000_GPIO_23,
AU1000_GPIO_24,
AU1000_GPIO_25,
AU1000_GPIO_26,
AU1000_GPIO_27,
AU1000_GPIO_28,
AU1000_GPIO_29,
AU1000_GPIO_30,
AU1000_GPIO_31,
};
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
......@@ -637,6 +903,7 @@ enum soc_au1000_ints {
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017FFFC
#define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT
#define AU1000_ETH0_BASE 0xB0500000
#define AU1000_ETH1_BASE 0xB0510000
......@@ -647,78 +914,13 @@ enum soc_au1000_ints {
/* Au1500 */
#ifdef CONFIG_SOC_AU1500
enum soc_au1500_ints {
AU1500_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
AU1500_UART0_INT = AU1500_FIRST_INT,
AU1000_PCI_INTA, /* au1500 */
AU1000_PCI_INTB, /* au1500 */
AU1500_UART3_INT,
AU1000_PCI_INTC, /* au1500 */
AU1000_PCI_INTD, /* au1500 */
AU1000_DMA_INT_BASE,
AU1000_TOY_INT = AU1500_FIRST_INT + 14,
AU1000_TOY_MATCH0_INT,
AU1000_TOY_MATCH1_INT,
AU1000_TOY_MATCH2_INT,
AU1000_RTC_INT,
AU1000_RTC_MATCH0_INT,
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
AU1500_PCI_ERR_INT,
AU1500_RESERVED_INT,
AU1000_USB_DEV_REQ_INT,
AU1000_USB_DEV_SUS_INT,
AU1000_USB_HOST_INT,
AU1000_ACSYNC_INT,
AU1500_MAC0_DMA_INT,
AU1500_MAC1_DMA_INT,
AU1000_AC97C_INT = AU1500_FIRST_INT + 31,
AU1000_GPIO_0,
AU1000_GPIO_1,
AU1000_GPIO_2,
AU1000_GPIO_3,
AU1000_GPIO_4,
AU1000_GPIO_5,
AU1000_GPIO_6,
AU1000_GPIO_7,
AU1000_GPIO_8,
AU1000_GPIO_9,
AU1000_GPIO_10,
AU1000_GPIO_11,
AU1000_GPIO_12,
AU1000_GPIO_13,
AU1000_GPIO_14,
AU1000_GPIO_15,
AU1500_GPIO_200,
AU1500_GPIO_201,
AU1500_GPIO_202,
AU1500_GPIO_203,
AU1500_GPIO_20,
AU1500_GPIO_204,
AU1500_GPIO_205,
AU1500_GPIO_23,
AU1500_GPIO_24,
AU1500_GPIO_25,
AU1500_GPIO_26,
AU1500_GPIO_27,
AU1500_GPIO_28,
AU1500_GPIO_206,
AU1500_GPIO_207,
AU1500_GPIO_208_215,
};
/* shortcuts */
#define INTA AU1000_PCI_INTA
#define INTB AU1000_PCI_INTB
#define INTC AU1000_PCI_INTC
#define INTD AU1000_PCI_INTD
#define UART0_ADDR 0xB1100000
#define UART3_ADDR 0xB1400000
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017fffc
#define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT
#define AU1500_ETH0_BASE 0xB1500000
#define AU1500_ETH1_BASE 0xB1510000
......@@ -729,67 +931,6 @@ enum soc_au1500_ints {
/* Au1100 */
#ifdef CONFIG_SOC_AU1100
enum soc_au1100_ints {
AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
AU1100_UART0_INT = AU1100_FIRST_INT,
AU1100_UART1_INT,
AU1100_SD_INT,
AU1100_UART3_INT,
AU1000_SSI0_INT,
AU1000_SSI1_INT,
AU1000_DMA_INT_BASE,
AU1000_TOY_INT = AU1100_FIRST_INT + 14,
AU1000_TOY_MATCH0_INT,
AU1000_TOY_MATCH1_INT,
AU1000_TOY_MATCH2_INT,
AU1000_RTC_INT,
AU1000_RTC_MATCH0_INT,
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
AU1000_IRDA_TX_INT,
AU1000_IRDA_RX_INT,
AU1000_USB_DEV_REQ_INT,
AU1000_USB_DEV_SUS_INT,
AU1000_USB_HOST_INT,
AU1000_ACSYNC_INT,
AU1100_MAC0_DMA_INT,
AU1100_GPIO_208_215,
AU1100_LCD_INT,
AU1000_AC97C_INT,
AU1000_GPIO_0,
AU1000_GPIO_1,
AU1000_GPIO_2,
AU1000_GPIO_3,
AU1000_GPIO_4,
AU1000_GPIO_5,
AU1000_GPIO_6,
AU1000_GPIO_7,
AU1000_GPIO_8,
AU1000_GPIO_9,
AU1000_GPIO_10,
AU1000_GPIO_11,
AU1000_GPIO_12,
AU1000_GPIO_13,
AU1000_GPIO_14,
AU1000_GPIO_15,
AU1000_GPIO_16,
AU1000_GPIO_17,
AU1000_GPIO_18,
AU1000_GPIO_19,
AU1000_GPIO_20,
AU1000_GPIO_21,
AU1000_GPIO_22,
AU1000_GPIO_23,
AU1000_GPIO_24,
AU1000_GPIO_25,
AU1000_GPIO_26,
AU1000_GPIO_27,
AU1000_GPIO_28,
AU1000_GPIO_29,
AU1000_GPIO_30,
AU1000_GPIO_31,
};
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
......@@ -797,6 +938,7 @@ enum soc_au1100_ints {
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017FFFC
#define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT
#define AU1100_ETH0_BASE 0xB0500000
#define AU1100_MAC0_ENABLE 0xB0520000
......@@ -804,80 +946,6 @@ enum soc_au1100_ints {
#endif /* CONFIG_SOC_AU1100 */
#ifdef CONFIG_SOC_AU1550
enum soc_au1550_ints {
AU1550_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
AU1550_UART0_INT = AU1550_FIRST_INT,
AU1550_PCI_INTA,
AU1550_PCI_INTB,
AU1550_DDMA_INT,
AU1550_CRYPTO_INT,
AU1550_PCI_INTC,
AU1550_PCI_INTD,
AU1550_PCI_RST_INT,
AU1550_UART1_INT,
AU1550_UART3_INT,
AU1550_PSC0_INT,
AU1550_PSC1_INT,
AU1550_PSC2_INT,
AU1550_PSC3_INT,
AU1000_TOY_INT,
AU1000_TOY_MATCH0_INT,
AU1000_TOY_MATCH1_INT,
AU1000_TOY_MATCH2_INT,
AU1000_RTC_INT,
AU1000_RTC_MATCH0_INT,
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
AU1550_NAND_INT = AU1550_FIRST_INT + 23,
AU1550_USB_DEV_REQ_INT,
AU1000_USB_DEV_REQ_INT = AU1550_USB_DEV_REQ_INT,
AU1550_USB_DEV_SUS_INT,
AU1000_USB_DEV_SUS_INT = AU1550_USB_DEV_SUS_INT,
AU1550_USB_HOST_INT,
AU1000_USB_HOST_INT = AU1550_USB_HOST_INT,
AU1550_MAC0_DMA_INT,
AU1550_MAC1_DMA_INT,
AU1000_GPIO_0 = AU1550_FIRST_INT + 32,
AU1000_GPIO_1,
AU1000_GPIO_2,
AU1000_GPIO_3,
AU1000_GPIO_4,
AU1000_GPIO_5,
AU1000_GPIO_6,
AU1000_GPIO_7,
AU1000_GPIO_8,
AU1000_GPIO_9,
AU1000_GPIO_10,
AU1000_GPIO_11,
AU1000_GPIO_12,
AU1000_GPIO_13,
AU1000_GPIO_14,
AU1000_GPIO_15,
AU1550_GPIO_200,
AU1500_GPIO_201_205, /* Logical or of GPIO201:205 */
AU1500_GPIO_16,
AU1500_GPIO_17,
AU1500_GPIO_20,
AU1500_GPIO_21,
AU1500_GPIO_22,
AU1500_GPIO_23,
AU1500_GPIO_24,
AU1500_GPIO_25,
AU1500_GPIO_26,
AU1500_GPIO_27,
AU1500_GPIO_28,
AU1500_GPIO_206,
AU1500_GPIO_207,
AU1500_GPIO_208_218, /* Logical or of GPIO208:218 */
};
/* shortcuts */
#define INTA AU1550_PCI_INTA
#define INTB AU1550_PCI_INTB
#define INTC AU1550_PCI_INTC
#define INTD AU1550_PCI_INTD
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
#define UART3_ADDR 0xB1400000
......@@ -885,6 +953,7 @@ enum soc_au1550_ints {
#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */
#define USB_OHCI_LEN 0x00060000
#define USB_HOST_CONFIG 0xB4027ffc
#define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT
#define AU1550_ETH0_BASE 0xB0500000
#define AU1550_ETH1_BASE 0xB0510000
......@@ -893,75 +962,8 @@ enum soc_au1550_ints {
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1550 */
#ifdef CONFIG_SOC_AU1200
enum soc_au1200_ints {
AU1200_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
AU1200_UART0_INT = AU1200_FIRST_INT,
AU1200_SWT_INT,
AU1200_SD_INT,
AU1200_DDMA_INT,
AU1200_MAE_BE_INT,
AU1200_GPIO_200,
AU1200_GPIO_201,
AU1200_GPIO_202,
AU1200_UART1_INT,
AU1200_MAE_FE_INT,
AU1200_PSC0_INT,
AU1200_PSC1_INT,
AU1200_AES_INT,
AU1200_CAMERA_INT,
AU1000_TOY_INT,
AU1000_TOY_MATCH0_INT,
AU1000_TOY_MATCH1_INT,
AU1000_TOY_MATCH2_INT,
AU1000_RTC_INT,
AU1000_RTC_MATCH0_INT,
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
AU1200_GPIO_203,
AU1200_NAND_INT,
AU1200_GPIO_204,
AU1200_GPIO_205,
AU1200_GPIO_206,
AU1200_GPIO_207,
AU1200_GPIO_208_215, /* Logical OR of 208:215 */
AU1200_USB_INT,
AU1000_USB_HOST_INT = AU1200_USB_INT,
AU1200_LCD_INT,
AU1200_MAE_BOTH_INT,
AU1000_GPIO_0,
AU1000_GPIO_1,
AU1000_GPIO_2,
AU1000_GPIO_3,
AU1000_GPIO_4,
AU1000_GPIO_5,
AU1000_GPIO_6,
AU1000_GPIO_7,
AU1000_GPIO_8,
AU1000_GPIO_9,
AU1000_GPIO_10,
AU1000_GPIO_11,
AU1000_GPIO_12,
AU1000_GPIO_13,
AU1000_GPIO_14,
AU1000_GPIO_15,
AU1000_GPIO_16,
AU1000_GPIO_17,
AU1000_GPIO_18,
AU1000_GPIO_19,
AU1000_GPIO_20,
AU1000_GPIO_21,
AU1000_GPIO_22,
AU1000_GPIO_23,
AU1000_GPIO_24,
AU1000_GPIO_25,
AU1000_GPIO_26,
AU1000_GPIO_27,
AU1000_GPIO_28,
AU1000_GPIO_29,
AU1000_GPIO_30,
AU1000_GPIO_31,
};
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
......@@ -990,15 +992,9 @@ enum soc_au1200_ints {
#define USBMSRMCFG_RDCOMB 30
#define USBMSRMCFG_PFEN 31
#endif /* CONFIG_SOC_AU1200 */
#define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT
#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31)
#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_BASE + 32)
#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31)
#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST
#define INTX 0xFF /* not valid */
#endif /* CONFIG_SOC_AU1200 */
/* Programmable Counters 0 and 1 */
#define SYS_BASE 0xB1900000
......
arch/mips/include/asm/mach-au1x00/gpio-au1000.h
View file @ 78814465
......@@ -35,15 +35,13 @@ static inline int au1000_gpio2_to_irq(int gpio)
return -ENXIO;
}
#ifdef CONFIG_SOC_AU1000
static inline int au1000_irq_to_gpio(int irq)
{
if ((irq >= AU1000_GPIO_0) && (irq <= AU1000_GPIO_31))
return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
if ((irq >= AU1000_GPIO0_INT) && (irq <= AU1000_GPIO31_INT))
return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO0_INT) + 0;
return -ENXIO;
}
#endif
static inline int au1500_gpio1_to_irq(int gpio)
{
......@@ -71,27 +69,25 @@ static inline int au1500_gpio2_to_irq(int gpio)
return -ENXIO;
}
#ifdef CONFIG_SOC_AU1500
static inline int au1500_irq_to_gpio(int irq)
{
switch (irq) {
case AU1000_GPIO_0 ... AU1000_GPIO_15:
case AU1500_GPIO_20:
case AU1500_GPIO_23 ... AU1500_GPIO_28:
return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
case AU1500_GPIO_200 ... AU1500_GPIO_203:
return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_200) + 0;
case AU1500_GPIO_204 ... AU1500_GPIO_205:
return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_204) + 4;
case AU1500_GPIO_206 ... AU1500_GPIO_207:
return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6;
case AU1500_GPIO_208_215:
case AU1500_GPIO0_INT ... AU1500_GPIO15_INT:
case AU1500_GPIO20_INT:
case AU1500_GPIO23_INT ... AU1500_GPIO28_INT:
return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO0_INT) + 0;
case AU1500_GPIO200_INT ... AU1500_GPIO203_INT:
return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO200_INT) + 0;
case AU1500_GPIO204_INT ... AU1500_GPIO205_INT:
return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO204_INT) + 4;
case AU1500_GPIO206_INT ... AU1500_GPIO207_INT:
return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO206_INT) + 6;
case AU1500_GPIO208_215_INT:
return ALCHEMY_GPIO2_BASE + 8;
}
return -ENXIO;
}
#endif
static inline int au1100_gpio1_to_irq(int gpio)
{
......@@ -108,19 +104,17 @@ static inline int au1100_gpio2_to_irq(int gpio)
return -ENXIO;
}
#ifdef CONFIG_SOC_AU1100
static inline int au1100_irq_to_gpio(int irq)
{
switch (irq) {
case AU1000_GPIO_0 ... AU1000_GPIO_31:
return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
case AU1100_GPIO_208_215:
case AU1100_GPIO0_INT ... AU1100_GPIO31_INT:
return ALCHEMY_GPIO1_BASE + (irq - AU1100_GPIO0_INT) + 0;
case AU1100_GPIO208_215_INT:
return ALCHEMY_GPIO2_BASE + 8;
}
return -ENXIO;
}
#endif
static inline int au1550_gpio1_to_irq(int gpio)
{
......@@ -149,24 +143,22 @@ static inline int au1550_gpio2_to_irq(int gpio)
return -ENXIO;
}
#ifdef CONFIG_SOC_AU1550
static inline int au1550_irq_to_gpio(int irq)
{
switch (irq) {
case AU1000_GPIO_0 ... AU1000_GPIO_15:
return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
case AU1550_GPIO_200:
case AU1500_GPIO_201_205:
return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO_200) + 0;
case AU1500_GPIO_16 ... AU1500_GPIO_28:
return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO_16) + 16;
case AU1500_GPIO_206 ... AU1500_GPIO_208_218:
return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6;
case AU1550_GPIO0_INT ... AU1550_GPIO15_INT:
return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO0_INT) + 0;
case AU1550_GPIO200_INT:
case AU1550_GPIO201_205_INT:
return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO200_INT) + 0;
case AU1550_GPIO16_INT ... AU1550_GPIO28_INT:
return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO16_INT) + 16;
case AU1550_GPIO206_INT ... AU1550_GPIO208_215_INT:
return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO206_INT) + 6;
}
return -ENXIO;
}
#endif
static inline int au1200_gpio1_to_irq(int gpio)
{
......@@ -187,23 +179,21 @@ static inline int au1200_gpio2_to_irq(int gpio)
return -ENXIO;
}
#ifdef CONFIG_SOC_AU1200
static inline int au1200_irq_to_gpio(int irq)
{
switch (irq) {
case AU1000_GPIO_0 ... AU1000_GPIO_31:
return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
case AU1200_GPIO_200 ... AU1200_GPIO_202:
return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_200) + 0;
case AU1200_GPIO_203:
case AU1200_GPIO0_INT ... AU1200_GPIO31_INT:
return ALCHEMY_GPIO1_BASE + (irq - AU1200_GPIO0_INT) + 0;
case AU1200_GPIO200_INT ... AU1200_GPIO202_INT:
return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO200_INT) + 0;
case AU1200_GPIO203_INT:
return ALCHEMY_GPIO2_BASE + 3;
case AU1200_GPIO_204 ... AU1200_GPIO_208_215:
return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_204) + 4;
case AU1200_GPIO204_INT ... AU1200_GPIO208_215_INT:
return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO204_INT) + 4;
}
return -ENXIO;
}
#endif
/*
* GPIO1 block macros for common linux gpio functions.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7