Merge tag 'drm-misc-next-2020-01-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.6:

UAPI Changes:

Cross-subsystem Changes:
- Convert simple panel bindings to a template.

Core Changes:
- Revert drm-bridge-state changes, it causes a dependency error
  between drm and drm_kms_helper.
- Fix when disabling crc's.
- Assorted Kconfig fixes.

Driver Changes:
- Add ddc symlinks to more drivers.
- Fix chained bridge handling in exynos and vc4.
- More clock rate fixes in sun4i.
- Add support for AUO B116XAK01, GiantPlus GPM940B0, Sony ACX424AKP,
  BOE NV140FHM-N49, Satoz SAT050AT40H12R2 and Sharp LS020B1DD01D panels.
- Assorted small bugfixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e8d4944-68d7-0df3-f39b-31f6fba22a2a@linux.intel.com

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Engine Backend Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The display engine backend exposes layers and sprites to the system.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-display-backend
+      - allwinner,sun5i-a13-display-backend
+      - allwinner,sun6i-a31-display-backend
+      - allwinner,sun7i-a20-display-backend
+      - allwinner,sun8i-a23-display-backend
+      - allwinner,sun8i-a33-display-backend
+      - allwinner,sun9i-a80-display-backend
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Display Backend registers
+      - description: SAT registers
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: be
+      - const: sat
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+    items:
+      - description: The backend interface clock
+      - description: The backend module clock
+      - description: The backend DRAM clock
+      - description: The SAT clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+      - const: sat
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: The Backend reset line
+      - description: The SAT reset line
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: be
+      - const: sat
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnects:
+    maxItems: 1
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnect-names:
+    const: dma-mem
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun8i-a33-display-backend
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+    reg-names:
+      minItems: 2
+
+    clocks:
+      minItems: 4
+
+    clock-names:
+      minItems: 4
+
+    resets:
+      minItems: 2
+
+    reset-names:
+      minItems: 2
+
+  required:
+    - reg-names
+    - reset-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+    reg-names:
+      maxItems: 1
+
+    clocks:
+      maxItems: 3
+
+    clock-names:
+      maxItems: 3
+
+    resets:
+      maxItems: 1
+
+    reset-names:
+      maxItems: 1
+
+examples:
+  - |
+    /*
+     * This comes from the clock/sun4i-a10-ccu.h and
+     * reset/sun4i-a10-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_AHB_DE_BE0	42
+    #define CLK_DRAM_DE_BE0	140
+    #define CLK_DE_BE0		144
+    #define RST_DE_BE0		5
+
+    display-backend@1e60000 {
+        compatible = "allwinner,sun4i-a10-display-backend";
+        reg = <0x01e60000 0x10000>;
+        interrupts = <47>;
+        clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+                 <&ccu CLK_DRAM_DE_BE0>;
+        clock-names = "ahb", "mod",
+                      "ram";
+        resets = <&ccu RST_DE_BE0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&fe0_out_be0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&fe1_out_be0>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon0_in_be0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon1_in_be0>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun8i-a23-a33-ccu.h and
+     * reset/sun8i-a23-a33-ccu.h headers, but we can't include them
+     * since it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_BUS_DE_BE	40
+    #define CLK_BUS_SAT		46
+    #define CLK_DRAM_DE_BE	84
+    #define CLK_DE_BE		85
+    #define RST_BUS_DE_BE	21
+    #define RST_BUS_SAT		27
+
+    display-backend@1e60000 {
+        compatible = "allwinner,sun8i-a33-display-backend";
+        reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+        reg-names = "be", "sat";
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+                 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+        clock-names = "ahb", "mod",
+                      "ram", "sat";
+        resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+        reset-names = "be", "sat";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&fe0_out_be0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                endpoint {
+                    remote-endpoint = <&drc0_in_be0>;
+                };
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Engine Pipeline Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The display engine pipeline (and its entry point, since it can be
+  either directly the backend or the frontend) is represented as an
+  extra node.
+
+  The Allwinner A10 Display pipeline is composed of several components
+  that are going to be documented below:
+
+  For all connections between components up to the TCONs in the
+  display pipeline, when there are multiple components of the same
+  type at the same depth, the local endpoint ID must be the same as
+  the remote component's index. For example, if the remote endpoint is
+  Frontend 1, then the local endpoint ID must be 1.
+
+  Frontend 0  [0] ------- [0]  Backend 0  [0] ------- [0]  TCON 0
+              [1] --   -- [1]             [1] --   -- [1]
+                    \ /                         \ /
+                     X                           X
+                    / \                         / \
+              [0] --   -- [0]             [0] --   -- [0]
+  Frontend 1  [1] ------- [1]  Backend 1  [1] ------- [1]  TCON 1
+
+  For a two pipeline system such as the one depicted above, the lines
+  represent the connections between the components, while the numbers
+  within the square brackets corresponds to the ID of the local endpoint.
+
+  The same rule also applies to DE 2.0 mixer-TCON connections:
+
+  Mixer 0  [0] ----------- [0]  TCON 0
+           [1] ----   ---- [1]
+                   \ /
+                    X
+                   / \
+           [0] ----   ---- [0]
+  Mixer 1  [1] ----------- [1]  TCON 1
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-display-engine
+      - allwinner,sun5i-a10s-display-engine
+      - allwinner,sun5i-a13-display-engine
+      - allwinner,sun6i-a31-display-engine
+      - allwinner,sun6i-a31s-display-engine
+      - allwinner,sun7i-a20-display-engine
+      - allwinner,sun8i-a23-display-engine
+      - allwinner,sun8i-a33-display-engine
+      - allwinner,sun8i-a83t-display-engine
+      - allwinner,sun8i-h3-display-engine
+      - allwinner,sun8i-r40-display-engine
+      - allwinner,sun8i-v3s-display-engine
+      - allwinner,sun9i-a80-display-engine
+      - allwinner,sun50i-a64-display-engine
+      - allwinner,sun50i-h6-display-engine
+
+  allwinner,pipelines:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle-array
+      - minItems: 1
+        maxItems: 2
+    description: |
+      Available display engine frontends (DE 1.0) or mixers (DE
+      2.0/3.0) available.
+
+required:
+  - compatible
+  - allwinner,pipelines
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun4i-a10-display-engine
+          - allwinner,sun6i-a31-display-engine
+          - allwinner,sun6i-a31s-display-engine
+          - allwinner,sun7i-a20-display-engine
+          - allwinner,sun8i-a83t-display-engine
+          - allwinner,sun8i-r40-display-engine
+          - allwinner,sun9i-a80-display-engine
+          - allwinner,sun50i-a64-display-engine
+
+then:
+  properties:
+    allwinner,pipelines:
+      minItems: 2
+
+else:
+  properties:
+    allwinner,pipelines:
+      maxItems: 1
+
+examples:
+  - |
+      de: display-engine {
+          compatible = "allwinner,sun4i-a10-display-engine";
+          allwinner,pipelines = <&fe0>, <&fe1>;
+      };
+
+...

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-frontend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Engine Frontend Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The display engine frontend does formats conversion, scaling,
+  deinterlacing and color space conversion.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-display-frontend
+      - allwinner,sun5i-a13-display-frontend
+      - allwinner,sun6i-a31-display-frontend
+      - allwinner,sun7i-a20-display-frontend
+      - allwinner,sun8i-a23-display-frontend
+      - allwinner,sun8i-a33-display-frontend
+      - allwinner,sun9i-a80-display-frontend
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The frontend interface clock
+      - description: The frontend module clock
+      - description: The frontend DRAM clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnects:
+    maxItems: 1
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnect-names:
+    const: dma-mem
+
+  resets:
+    maxItems: 1
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun4i-a10-ccu.h>
+    #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+    fe0: display-frontend@1e00000 {
+        compatible = "allwinner,sun4i-a10-display-frontend";
+        reg = <0x01e00000 0x20000>;
+        interrupts = <47>;
+        clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+                 <&ccu CLK_DRAM_DE_FE0>;
+        clock-names = "ahb", "mod",
+                      "ram";
+        resets = <&ccu RST_DE_FE0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            fe0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                fe0_out_be0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&be0_in_fe0>;
+                };
+
+                fe0_out_be1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&be1_in_fe0>;
+                };
+            };
+        };
+    };
+
+
+...

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 HDMI Controller Device Tree Bindings
+
+description: |
+  The HDMI Encoder supports the HDMI video and audio outputs, and does
+  CEC. It is one end of the pipeline.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-hdmi
+      - const: allwinner,sun5i-a10s-hdmi
+      - const: allwinner,sun6i-a31-hdmi
+      - items:
+        - const: allwinner,sun7i-a20-hdmi
+        - const: allwinner,sun5i-a10s-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - items:
+        - description: The HDMI interface clock
+        - description: The HDMI module clock
+        - description: The first video PLL
+        - description: The second video PLL
+
+      - items:
+        - description: The HDMI interface clock
+        - description: The HDMI module clock
+        - description: The HDMI DDC clock
+        - description: The first video PLL
+        - description: The second video PLL
+
+  clock-names:
+    oneOf:
+      - items:
+        - const: ahb
+        - const: mod
+        - const: pll-0
+        - const: pll-1
+
+      - items:
+        - const: ahb
+        - const: mod
+        - const: ddc
+        - const: pll-0
+        - const: pll-1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: DDC Transmission DMA Channel
+      - description: DDC Reception DMA Channel
+      - description: Audio Transmission DMA Channel
+
+  dma-names:
+    items:
+      - const: ddc-tx
+      - const: ddc-rx
+      - const: audio-tx
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller. Usually an HDMI
+          connector.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun6i-a31-hdmi
+
+then:
+  properties:
+    clocks:
+      minItems: 5
+
+    clock-names:
+      minItems: 5
+
+  required:
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun4i-a10-ccu.h>
+    #include <dt-bindings/dma/sun4i-a10.h>
+    #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+    hdmi: hdmi@1c16000 {
+        compatible = "allwinner,sun4i-a10-hdmi";
+        reg = <0x01c16000 0x1000>;
+        interrupts = <58>;
+        clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+                 <&ccu CLK_PLL_VIDEO0_2X>,
+                 <&ccu CLK_PLL_VIDEO1_2X>;
+        clock-names = "ahb", "mod", "pll-0", "pll-1";
+        dmas = <&dma SUN4I_DMA_NORMAL 16>,
+               <&dma SUN4I_DMA_NORMAL 16>,
+               <&dma SUN4I_DMA_DEDICATED 24>;
+        dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            hdmi_in: port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                hdmi_in_tcon0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon0_out_hdmi>;
+                };
+
+                hdmi_in_tcon1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon1_out_hdmi>;
+                };
+            };
+
+            hdmi_out: port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tv-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 TV Encoder Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun4i-a10-tv-encoder
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  port:
+    type: object
+    description:
+      A port node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt. The
+      first port should be the input endpoint, usually coming from the
+      associated TCON.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    tve0: tv-encoder@1c0a000 {
+        compatible = "allwinner,sun4i-a10-tv-encoder";
+        reg = <0x01c0a000 0x1000>;
+        clocks = <&ahb_gates 34>;
+        resets = <&tcon_ch0_clk 0>;
+
+        port {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            tve0_in_tcon0: endpoint@0 {
+                reg = <0>;
+                remote-endpoint = <&tcon0_out_tve0>;
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Dynamic Range Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The DRC (Dynamic Range Controller) allows to dynamically adjust
+  pixel brightness/contrast based on histogram measurements for LCD
+  content adaptive backlight control.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-drc
+      - allwinner,sun6i-a31s-drc
+      - allwinner,sun8i-a23-drc
+      - allwinner,sun8i-a33-drc
+      - allwinner,sun9i-a80-drc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The DRC interface clock
+      - description: The DRC module clock
+      - description: The DRC DRAM clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    #include <dt-bindings/clock/sun6i-a31-ccu.h>
+    #include <dt-bindings/reset/sun6i-a31-ccu.h>
+
+    drc0: drc@1e70000 {
+        compatible = "allwinner,sun6i-a31-drc";
+        reg = <0x01e70000 0x10000>;
+        interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
+                 <&ccu CLK_DRAM_DRC0>;
+        clock-names = "ahb", "mod",
+                      "ram";
+        resets = <&ccu RST_AHB1_DRC0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            drc0_in: port@0 {
+                reg = <0>;
+
+                drc0_in_be0: endpoint {
+                    remote-endpoint = <&be0_out_drc0>;
+                };
+            };
+
+            drc0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                drc0_out_tcon0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon0_in_drc0>;
+                };
+
+                drc0_out_tcon1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon1_in_drc0>;
+                };
+            };
+        };
+    };
+
+
+...

Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-de2-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner Display Engine 2.0 Mixer Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun8i-a83t-de2-mixer-0
+      - allwinner,sun8i-a83t-de2-mixer-1
+      - allwinner,sun8i-h3-de2-mixer-0
+      - allwinner,sun8i-r40-de2-mixer-0
+      - allwinner,sun8i-r40-de2-mixer-1
+      - allwinner,sun8i-v3s-de2-mixer
+      - allwinner,sun50i-a64-de2-mixer-0
+      - allwinner,sun50i-a64-de2-mixer-1
+      - allwinner,sun50i-h6-de3-mixer-0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The mixer interface clock
+      - description: The mixer module clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-de2.h>
+    #include <dt-bindings/reset/sun8i-de2.h>
+
+    mixer0: mixer@1100000 {
+        compatible = "allwinner,sun8i-a83t-de2-mixer-0";
+        reg = <0x01100000 0x100000>;
+        clocks = <&display_clocks CLK_BUS_MIXER0>,
+                 <&display_clocks CLK_MIXER0>;
+        clock-names = "bus",
+                      "mod";
+        resets = <&display_clocks RST_MIXER0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mixer0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                mixer0_out_tcon0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon0_in_mixer0>;
+                };
+
+                mixer0_out_tcon1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon1_in_mixer0>;
+                };
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings
+
+description: |
+  The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller
+  IP with Allwinner\'s own PHY IP. It supports audio and video outputs
+  and CEC.
+
+  These DT bindings follow the Synopsys DWC HDMI TX bindings defined
+  in Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with
+  the following device-specific properties.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun8i-a83t-dw-hdmi
+      - const: allwinner,sun50i-h6-dw-hdmi
+
+      - items:
+        - enum:
+          - allwinner,sun8i-h3-dw-hdmi
+          - allwinner,sun8i-r40-dw-hdmi
+          - allwinner,sun50i-a64-dw-hdmi
+        - const: allwinner,sun8i-a83t-dw-hdmi
+
+  reg:
+    maxItems: 1
+
+  reg-io-width:
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 6
+    items:
+      - description: Bus Clock
+      - description: Register Clock
+      - description: TMDS Clock
+      - description: HDMI CEC Clock
+      - description: HDCP Clock
+      - description: HDCP Bus Clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 6
+    items:
+      - const: iahb
+      - const: isfr
+      - const: tmds
+      - const: cec
+      - const: hdcp
+      - const: hdcp-bus
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: HDMI Controller Reset
+      - description: HDCP Reset
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: ctrl
+      - const: hdcp
+
+  phys:
+    maxItems: 1
+    description:
+      Phandle to the DWC HDMI PHY.
+
+  phy-names:
+    const: phy
+
+  hvcc-supply:
+    description:
+      The VCC power supply of the controller
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller. Usually the associated
+          TCON.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller. Usually an HDMI
+          connector.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-io-width
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - ports
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun50i-h6-dw-hdmi
+
+then:
+  properties:
+    clocks:
+      minItems: 6
+
+    clock-names:
+      minItems: 6
+
+    resets:
+      minItems: 2
+
+    reset-names:
+      minItems: 2
+
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun8i-a83t-ccu.h and
+     * reset/sun8i-a83t-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+    #define CLK_BUS_HDMI	39
+    #define CLK_HDMI		93
+    #define CLK_HDMI_SLOW	94
+    #define RST_BUS_HDMI1	26
+
+    hdmi@1ee0000 {
+        compatible = "allwinner,sun8i-a83t-dw-hdmi";
+        reg = <0x01ee0000 0x10000>;
+        reg-io-width = <1>;
+        interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+                 <&ccu CLK_HDMI>;
+        clock-names = "iahb", "isfr", "tmds";
+        resets = <&ccu RST_BUS_HDMI1>;
+        reset-names = "ctrl";
+        phys = <&hdmi_phy>;
+        phy-names = "phy";
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_pins>;
+        status = "disabled";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&tcon1_out_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+    /* Cleanup after ourselves */
+    #undef CLK_BUS_HDMI
+    #undef CLK_HDMI
+    #undef CLK_HDMI_SLOW
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun50i-h6-ccu.h and
+     * reset/sun50i-h6-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+    #define CLK_BUS_HDMI	126
+    #define CLK_BUS_HDCP	137
+    #define CLK_HDMI		123
+    #define CLK_HDMI_SLOW	124
+    #define CLK_HDMI_CEC	125
+    #define CLK_HDCP		136
+    #define RST_BUS_HDMI_SUB	57
+    #define RST_BUS_HDCP	62
+
+    hdmi@6000000 {
+        compatible = "allwinner,sun50i-h6-dw-hdmi";
+        reg = <0x06000000 0x10000>;
+        reg-io-width = <1>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+                 <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
+                 <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
+        clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
+                      "hdcp-bus";
+        resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
+        reset-names = "ctrl", "hdcp";
+        phys = <&hdmi_phy>;
+        phy-names = "phy";
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_pins>;
+        status = "disabled";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-hdmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t HDMI PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun8i-a83t-hdmi-phy
+      - allwinner,sun8i-h3-hdmi-phy
+      - allwinner,sun8i-r40-hdmi-phy
+      - allwinner,sun50i-a64-hdmi-phy
+      - allwinner,sun50i-h6-hdmi-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: Parent of the PHY clock
+      - description: Second possible parent of the PHY clock
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      - const: bus
+      - const: mod
+      - const: pll-0
+      - const: pll-1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: phy
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun8i-r40-hdmi-phy
+
+then:
+  properties:
+    clocks:
+      minItems: 4
+
+    clock-names:
+      minItems: 4
+
+else:
+  if:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - allwinner,sun8i-h3-hdmi-phy
+            - allwinner,sun50i-a64-hdmi-phy
+
+  then:
+    properties:
+      clocks:
+        minItems: 3
+
+      clock-names:
+        minItems: 3
+
+  else:
+    properties:
+      clocks:
+        maxItems: 2
+
+      clock-names:
+        maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+    #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+    hdmi_phy: hdmi-phy@1ef0000 {
+        compatible = "allwinner,sun8i-a83t-hdmi-phy";
+        reg = <0x01ef0000 0x10000>;
+        clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_HDMI0>;
+        reset-names = "phy";
+        #phy-cells = <0>;
+    };
+
+...

Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-r40-tcon-top.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner R40 TCON TOP Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  TCON TOPs main purpose is to configure whole display pipeline. It
+  determines relationships between mixers and TCONs, selects source
+  TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV
+  encoder clock source and contains additional TV TCON and DSI gates.
+
+  It allows display pipeline to be configured in very different ways:
+
+                                  / LCD0/LVDS0
+                   / [0] TCON-LCD0
+                   |              \ MIPI DSI
+   mixer0          |
+          \        / [1] TCON-LCD1 - LCD1/LVDS1
+           TCON-TOP
+          /        \ [2] TCON-TV0 [0] - TVE0/RGB
+   mixer1          |                  \
+                   |                   TCON-TOP - HDMI
+                   |                  /
+                   \ [3] TCON-TV1 [1] - TVE1/RGB
+
+  Note that both TCON TOP references same physical unit. Both mixers
+  can be connected to any TCON. Not all TCON TOP variants support all
+  features.
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun8i-r40-tcon-top
+      - allwinner,sun50i-h6-tcon-top
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 6
+    items:
+      - description: The TCON TOP interface clock
+      - description: The TCON TOP TV0 clock
+      - description: The TCON TOP TVE0 clock
+      - description: The TCON TOP TV1 clock
+      - description: The TCON TOP TVE1 clock
+      - description: The TCON TOP MIPI DSI clock
+
+  clock-names:
+    minItems: 2
+    maxItems: 6
+    items:
+      - const: bus
+      - const: tcon-tv0
+      - const: tve0
+      - const: tcon-tv1
+      - const: tve1
+      - const: dsi
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 3
+    description: >
+      The first item is the name of the clock created for the TV0
+      channel, the second item is the name of the TCON TV1 channel
+      clock and the third one is the name of the DSI channel clock.
+
+  resets:
+    maxItems: 1
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+      All ports should have only one endpoint connected to
+      remote endpoint.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoint for Mixer 0 mux.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoint for Mixer 0 mux
+
+        properties:
+          "#address-cells":
+            const: 1
+
+          "#size-cells":
+            const: 0
+
+          reg: true
+
+        patternProperties:
+          "^endpoint@[0-9]$":
+            type: object
+
+            properties:
+              reg:
+                description: |
+                  ID of the target TCON
+
+            required:
+              - reg
+
+        required:
+          - "#address-cells"
+          - "#size-cells"
+
+        additionalProperties: false
+
+      port@2:
+        type: object
+        description: |
+          Input endpoint for Mixer 1 mux.
+
+      port@3:
+        type: object
+        description: |
+          Output endpoint for Mixer 1 mux
+
+        properties:
+          "#address-cells":
+            const: 1
+
+          "#size-cells":
+            const: 0
+
+          reg: true
+
+        patternProperties:
+          "^endpoint@[0-9]$":
+            type: object
+
+            properties:
+              reg:
+                description: |
+                  ID of the target TCON
+
+            required:
+              - reg
+
+        required:
+          - "#address-cells"
+          - "#size-cells"
+
+        additionalProperties: false
+
+      port@4:
+        type: object
+        description: |
+          Input endpoint for HDMI mux.
+
+        properties:
+          "#address-cells":
+            const: 1
+
+          "#size-cells":
+            const: 0
+
+          reg: true
+
+        patternProperties:
+          "^endpoint@[0-9]$":
+            type: object
+
+            properties:
+              reg:
+                description: |
+                  ID of the target TCON
+
+            required:
+              - reg
+
+        required:
+          - "#address-cells"
+          - "#size-cells"
+
+        additionalProperties: false
+
+      port@5:
+        type: object
+        description: |
+          Output endpoint for HDMI mux
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+      - port@4
+      - port@5
+
+    additionalProperties: false
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-output-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun50i-h6-tcon-top
+
+then:
+  properties:
+    clocks:
+      maxItems: 2
+
+    clock-output-names:
+      maxItems: 1
+
+else:
+  properties:
+    clocks:
+      minItems: 6
+
+    clock-output-names:
+      minItems: 3
+
+    ports:
+      required:
+        - port@2
+        - port@3
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    #include <dt-bindings/clock/sun8i-r40-ccu.h>
+    #include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+      tcon_top: tcon-top@1c70000 {
+          compatible = "allwinner,sun8i-r40-tcon-top";
+          reg = <0x01c70000 0x1000>;
+          clocks = <&ccu CLK_BUS_TCON_TOP>,
+                   <&ccu CLK_TCON_TV0>,
+                   <&ccu CLK_TVE0>,
+                   <&ccu CLK_TCON_TV1>,
+                   <&ccu CLK_TVE1>,
+                   <&ccu CLK_DSI_DPHY>;
+          clock-names = "bus",
+                        "tcon-tv0",
+                        "tve0",
+                        "tcon-tv1",
+                        "tve1",
+                        "dsi";
+          clock-output-names = "tcon-top-tv0",
+                               "tcon-top-tv1",
+                               "tcon-top-dsi";
+          resets = <&ccu RST_BUS_TCON_TOP>;
+          #clock-cells = <1>;
+
+          ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              tcon_top_mixer0_in: port@0 {
+                  reg = <0>;
+
+                  tcon_top_mixer0_in_mixer0: endpoint {
+                      remote-endpoint = <&mixer0_out_tcon_top>;
+                  };
+              };
+
+              tcon_top_mixer0_out: port@1 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <1>;
+
+                  tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+                      reg = <0>;
+                  };
+
+                  tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
+                      reg = <1>;
+                  };
+
+                  tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+                      reg = <2>;
+                      remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
+                  };
+
+                  tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
+                      reg = <3>;
+                      remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
+                  };
+              };
+
+              tcon_top_mixer1_in: port@2 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <2>;
+
+                  tcon_top_mixer1_in_mixer1: endpoint@1 {
+                      reg = <1>;
+                      remote-endpoint = <&mixer1_out_tcon_top>;
+                  };
+              };
+
+              tcon_top_mixer1_out: port@3 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <3>;
+
+                  tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+                      reg = <0>;
+                  };
+
+                  tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
+                      reg = <1>;
+                  };
+
+                  tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+                      reg = <2>;
+                      remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
+                  };
+
+                  tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
+                      reg = <3>;
+                      remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
+                  };
+              };
+
+              tcon_top_hdmi_in: port@4 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <4>;
+
+                  tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
+                      reg = <0>;
+                      remote-endpoint = <&tcon_tv0_out_tcon_top>;
+                  };
+
+                  tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
+                      reg = <1>;
+                      remote-endpoint = <&tcon_tv1_out_tcon_top>;
+                  };
+              };
+
+              tcon_top_hdmi_out: port@5 {
+                  reg = <5>;
+
+                  tcon_top_hdmi_out_hdmi: endpoint {
+                      remote-endpoint = <&hdmi_in_tcon_top>;
+                  };
+              };
+          };
+      };
+
+...

Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun9i-a80-deu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Detail Enhancement Unit Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC,
+  can sharpen the display content in both luma and chroma channels.
+
+properties:
+  compatible:
+    const: allwinner,sun9i-a80-deu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The DEU interface clock
+      - description: The DEU module clock
+      - description: The DEU DRAM clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    #include <dt-bindings/clock/sun9i-a80-de.h>
+    #include <dt-bindings/reset/sun9i-a80-de.h>
+
+    deu0: deu@3300000 {
+        compatible = "allwinner,sun9i-a80-deu";
+        reg = <0x03300000 0x40000>;
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&de_clocks CLK_BUS_DEU0>,
+                 <&de_clocks CLK_IEP_DEU0>,
+                 <&de_clocks CLK_DRAM_DEU0>;
+        clock-names = "ahb",
+                      "mod",
+                      "ram";
+        resets = <&de_clocks RST_DEU0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            deu0_in: port@0 {
+                reg = <0>;
+
+                deu0_in_fe0: endpoint {
+                    remote-endpoint = <&fe0_out_deu0>;
+                };
+            };
+
+            deu0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                deu0_out_be0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&be0_in_deu0>;
+                };
+
+                deu0_out_be1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&be1_in_deu0>;
+                };
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml

-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/panel/ampire,am-480272h3tmqw-t01h.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
-
-maintainers:
-  - Yannick Fertre <yannick.fertre@st.com>
-  - Thierry Reding <treding@nvidia.com>
-
-allOf:
-  - $ref: panel-common.yaml#
-
-properties:
-  compatible:
-    const: ampire,am-480272h3tmqw-t01h
-
-  power-supply: true
-  enable-gpios: true
-  backlight: true
-  port: true
-
-required:
-  - compatible
-
-additionalProperties: false
-
-examples:
-  - |
-    panel_rgb: panel {
-      compatible = "ampire,am-480272h3tmqw-t01h";
-      enable-gpios = <&gpioa 8 1>;
-      port {
-        panel_in_rgb: endpoint {
-          remote-endpoint = <&controller_out_rgb>;
-        };
-      };
-    };
-
-...

Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt

-Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "ampire,am800480r3tmqwa1h"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/giantplus,gpm940b0.txt

-GiantPlus 3.0" (320x240 pixels) 24-bit TFT LCD panel
-
-Required properties:
-- compatible: should be "giantplus,gpm940b0"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/panel-simple.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple panels with one power supply
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  This binding file is a collection of the simple (dumb) panels that
+  requires only a single power-supply.
+  There are optionally a backlight and an enable GPIO.
+  The panel may use an OF graph binding for the association to the display,
+  or it may be a direct child node of the display.
+
+  If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    enum:
+    # compatible must be listed in alphabetical order, ordered by compatible.
+    # The description in the comment is mandatory for each compatible.
+
+        # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
+      - ampire,am-480272h3tmqw-t01h
+        # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
+      - ampire,am800480r3tmqwa1h
+        # AUO B116XAK01 eDP TFT LCD panel
+      - auo,b116xa01
+        # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
+      - boe,nv140fhmn49
+        # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel
+      - giantplus,gpm940b0
+        # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel
+      - satoz,sat050at40h12r2
+        # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
+      - sharp,ls020b1dd01d
+
+  backlight: true
+  enable-gpios: true
+  port: true
+  power-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    panel_rgb: panel-rgb {
+      compatible = "ampire,am-480272h3tmqw-t01h";
+      power-supply = <&vcc_lcd_reg>;
+
+      port {
+        panel_in_rgb: endpoint {
+          remote-endpoint = <&ltdc_out_rgb>;
+        };
+      };
+    };

Documentation/devicetree/bindings/display/panel/sharp,ls020b1dd01d.txt

-Sharp 2.0" (240x160 pixels) 16-bit TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,ls020b1dd01d"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -825,6 +825,8 @@ patternProperties:
     description: Sancloud Ltd
   "^sandisk,.*":
     description: Sandisk Corporation
+  "^satoz,.*":
+    description: Satoz International Co., Ltd
   "^sbs,.*":
     description: Smart Battery System
   "^schindler,.*":

MAINTAINERS

@@ -5357,6 +5357,12 @@ S:	Maintained
 F:	drivers/gpu/drm/tiny/st7735r.c
 F:	Documentation/devicetree/bindings/display/sitronix,st7735r.txt
 
+DRM DRIVER FOR SONY ACX424AKP PANELS
+M:	Linus Walleij <linus.walleij@linaro.org>
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+S:	Maintained
+F:	drivers/gpu/drm/panel/panel-sony-acx424akp.c
+
 DRM DRIVER FOR ST-ERICSSON MCDE
 M:	Linus Walleij <linus.walleij@linaro.org>
 T:	git git://anongit.freedesktop.org/drm/drm-misc

drivers/gpu/drm/Kconfig

@@ -168,6 +168,7 @@ config DRM_LOAD_EDID_FIRMWARE
 
 config DRM_DP_CEC
 	bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"
+	depends on DRM
 	select CEC_CORE
 	help
 	  Choose this option if you want to enable HDMI CEC support for

drivers/gpu/drm/bridge/analogix/analogix_dp_core.c

@@ -1289,21 +1289,19 @@ struct drm_crtc *analogix_dp_get_new_crtc(struct analogix_dp_device *dp,
 	return conn_state->crtc;
 }
 
-static void
-analogix_dp_bridge_atomic_pre_enable(struct drm_bridge *bridge,
-				     struct drm_bridge_state *old_bridge_state)
+static void analogix_dp_bridge_atomic_pre_enable(struct drm_bridge *bridge,
+						 struct drm_atomic_state *state)
 {
-	struct drm_atomic_state *old_state = old_bridge_state->base.state;
 	struct analogix_dp_device *dp = bridge->driver_private;
 	struct drm_crtc *crtc;
 	struct drm_crtc_state *old_crtc_state;
 	int ret;
 
-	crtc = analogix_dp_get_new_crtc(dp, old_state);
+	crtc = analogix_dp_get_new_crtc(dp, state);
 	if (!crtc)
 		return;
 
-	old_crtc_state = drm_atomic_get_old_crtc_state(old_state, crtc);
+	old_crtc_state = drm_atomic_get_old_crtc_state(state, crtc);
 	/* Don't touch the panel if we're coming back from PSR */
 	if (old_crtc_state && old_crtc_state->self_refresh_active)
 		return;
@@ -1368,22 +1366,20 @@ static int analogix_dp_set_bridge(struct analogix_dp_device *dp)
 	return ret;
 }
 
-static void
-analogix_dp_bridge_atomic_enable(struct drm_bridge *bridge,
-				 struct drm_bridge_state *old_bridge_state)
+static void analogix_dp_bridge_atomic_enable(struct drm_bridge *bridge,
+					     struct drm_atomic_state *state)
 {
-	struct drm_atomic_state *old_state = old_bridge_state->base.state;
 	struct analogix_dp_device *dp = bridge->driver_private;
 	struct drm_crtc *crtc;
 	struct drm_crtc_state *old_crtc_state;
 	int timeout_loop = 0;
 	int ret;
 
-	crtc = analogix_dp_get_new_crtc(dp, old_state);
+	crtc = analogix_dp_get_new_crtc(dp, state);
 	if (!crtc)
 		return;
 
-	old_crtc_state = drm_atomic_get_old_crtc_state(old_state, crtc);
+	old_crtc_state = drm_atomic_get_old_crtc_state(state, crtc);
 	/* Not a full enable, just disable PSR and continue */
 	if (old_crtc_state && old_crtc_state->self_refresh_active) {
 		ret = analogix_dp_disable_psr(dp);
@@ -1444,20 +1440,18 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
 	dp->dpms_mode = DRM_MODE_DPMS_OFF;
 }
 
-static void
-analogix_dp_bridge_atomic_disable(struct drm_bridge *bridge,
-				  struct drm_bridge_state *old_bridge_state)
+static void analogix_dp_bridge_atomic_disable(struct drm_bridge *bridge,
+					      struct drm_atomic_state *state)
 {
-	struct drm_atomic_state *old_state = old_bridge_state->base.state;
 	struct analogix_dp_device *dp = bridge->driver_private;
 	struct drm_crtc *crtc;
 	struct drm_crtc_state *new_crtc_state = NULL;
 
-	crtc = analogix_dp_get_new_crtc(dp, old_state);
+	crtc = analogix_dp_get_new_crtc(dp, state);
 	if (!crtc)
 		goto out;
 
-	new_crtc_state = drm_atomic_get_new_crtc_state(old_state, crtc);
+	new_crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
 	if (!new_crtc_state)
 		goto out;
 
@@ -1469,21 +1463,20 @@ analogix_dp_bridge_atomic_disable(struct drm_bridge *bridge,
 	analogix_dp_bridge_disable(bridge);
 }
 
-static void
-analogix_dp_bridge_atomic_post_disable(struct drm_bridge *bridge,
-				struct drm_bridge_state *old_bridge_state)
+static
+void analogix_dp_bridge_atomic_post_disable(struct drm_bridge *bridge,
+					    struct drm_atomic_state *state)
 {
-	struct drm_atomic_state *old_state = old_bridge_state->base.state;
 	struct analogix_dp_device *dp = bridge->driver_private;
 	struct drm_crtc *crtc;
 	struct drm_crtc_state *new_crtc_state;
 	int ret;
 
-	crtc = analogix_dp_get_new_crtc(dp, old_state);
+	crtc = analogix_dp_get_new_crtc(dp, state);
 	if (!crtc)
 		return;
 
-	new_crtc_state = drm_atomic_get_new_crtc_state(old_state, crtc);
+	new_crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
 	if (!new_crtc_state || !new_crtc_state->self_refresh_active)
 		return;
 

drivers/gpu/drm/drm_atomic.c

@@ -30,7 +30,6 @@
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_uapi.h>
-#include <drm/drm_bridge.h>
 #include <drm/drm_debugfs.h>
 #include <drm/drm_device.h>
 #include <drm/drm_drv.h>
@@ -1018,44 +1017,6 @@ static void drm_atomic_connector_print_state(struct drm_printer *p,
 		connector->funcs->atomic_print_state(p, state);
 }
 
-/**
- * drm_atomic_add_encoder_bridges - add bridges attached to an encoder
- * @state: atomic state
- * @encoder: DRM encoder
- *
- * This function adds all bridges attached to @encoder. This is needed to add
- * bridge states to @state and make them available when
- * &bridge_funcs.atomic_{check,pre_enable,enable,disable_post_disable}() are
- * called
- *
- * Returns:
- * 0 on success or can fail with -EDEADLK or -ENOMEM. When the error is EDEADLK
- * then the w/w mutex code has detected a deadlock and the entire atomic
- * sequence must be restarted. All other errors are fatal.
- */
-int
-drm_atomic_add_encoder_bridges(struct drm_atomic_state *state,
-			       struct drm_encoder *encoder)
-{
-	struct drm_bridge_state *bridge_state;
-	struct drm_bridge *bridge;
-
-	if (!encoder)
-		return 0;
-
-	DRM_DEBUG_ATOMIC("Adding all bridges for [encoder:%d:%s] to %p\n",
-			 encoder->base.id, encoder->name, state);
-
-	drm_for_each_bridge_in_chain(encoder, bridge) {
-		bridge_state = drm_atomic_get_bridge_state(state, bridge);
-		if (IS_ERR(bridge_state))
-			return PTR_ERR(bridge_state);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(drm_atomic_add_encoder_bridges);
-
 /**
  * drm_atomic_add_affected_connectors - add connectors for CRTC
  * @state: atomic state

drivers/gpu/drm/drm_atomic_helper.c

@@ -437,12 +437,12 @@ mode_fixup(struct drm_atomic_state *state)
 		funcs = encoder->helper_private;
 
 		bridge = drm_bridge_chain_get_first_bridge(encoder);
-		ret = drm_atomic_bridge_chain_check(bridge,
-						    new_crtc_state,
-						    new_conn_state);
-		if (ret) {
-			DRM_DEBUG_ATOMIC("Bridge atomic check failed\n");
-			return ret;
+		ret = drm_bridge_chain_mode_fixup(bridge,
+					&new_crtc_state->mode,
+					&new_crtc_state->adjusted_mode);
+		if (!ret) {
+			DRM_DEBUG_ATOMIC("Bridge fixup failed\n");
+			return -EINVAL;
 		}
 
 		if (funcs && funcs->atomic_check) {
@@ -730,26 +730,6 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,
 			return ret;
 	}
 
-	/*
-	 * Iterate over all connectors again, and add all affected bridges to
-	 * the state.
-	 */
-	for_each_oldnew_connector_in_state(state, connector,
-					   old_connector_state,
-					   new_connector_state, i) {
-		struct drm_encoder *encoder;
-
-		encoder = old_connector_state->best_encoder;
-		ret = drm_atomic_add_encoder_bridges(state, encoder);
-		if (ret)
-			return ret;
-
-		encoder = new_connector_state->best_encoder;
-		ret = drm_atomic_add_encoder_bridges(state, encoder);
-		if (ret)
-			return ret;
-	}
-
 	ret = mode_valid(state);
 	if (ret)
 		return ret;

drivers/gpu/drm/drm_debugfs_crc.c

@@ -140,8 +140,8 @@ static ssize_t crc_control_write(struct file *file, const char __user *ubuf,
 	if (IS_ERR(source))
 		return PTR_ERR(source);
 
-	if (source[len] == '\n')
-		source[len] = '\0';
+	if (source[len - 1] == '\n')
+		source[len - 1] = '\0';
 
 	ret = crtc->funcs->verify_crc_source(crtc, source, &values_cnt);
 	if (ret)
@@ -258,6 +258,11 @@ static int crtc_crc_release(struct inode *inode, struct file *filep)
 	struct drm_crtc *crtc = filep->f_inode->i_private;
 	struct drm_crtc_crc *crc = &crtc->crc;
 
+	/* terminate the infinite while loop if 'drm_dp_aux_crc_work' running */
+	spin_lock_irq(&crc->lock);
+	crc->opened = false;
+	spin_unlock_irq(&crc->lock);
+
 	crtc->funcs->set_crc_source(crtc, NULL);
 
 	spin_lock_irq(&crc->lock);

drivers/gpu/drm/drm_fb_cma_helper.c

@@ -9,6 +9,7 @@
  *  Copyright (C) 2012 Red Hat
  */
 
+#include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_fourcc.h>
 #include <drm/drm_framebuffer.h>
 #include <drm/drm_gem_cma_helper.h>

drivers/gpu/drm/drm_lock.c

@@ -360,7 +360,8 @@ void drm_legacy_lock_master_cleanup(struct drm_device *dev, struct drm_master *m
 	/*
 	 * Since the master is disappearing, so is the
 	 * possibility to lock.
-	 */	mutex_lock(&dev->struct_mutex);
+	 */
+	mutex_lock(&dev->struct_mutex);
 	if (master->lock.hw_lock) {
 		if (dev->sigdata.lock == master->lock.hw_lock)
 			dev->sigdata.lock = NULL;

drivers/gpu/drm/drm_modes.c

@@ -233,7 +233,7 @@ struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay,
 		/* 3) Nominal HSync width (% of line period) - default 8 */
 #define CVT_HSYNC_PERCENTAGE	8
 		unsigned int hblank_percentage;
-		int vsyncandback_porch, vback_porch, hblank;
+		int vsyncandback_porch, __maybe_unused vback_porch, hblank;
 
 		/* estimated the horizontal period */
 		tmp1 = HV_FACTOR * 1000000  -
@@ -386,9 +386,10 @@ drm_gtf_mode_complex(struct drm_device *dev, int hdisplay, int vdisplay,
 	int top_margin, bottom_margin;
 	int interlace;
 	unsigned int hfreq_est;
-	int vsync_plus_bp, vback_porch;
-	unsigned int vtotal_lines, vfieldrate_est, hperiod;
-	unsigned int vfield_rate, vframe_rate;
+	int vsync_plus_bp, __maybe_unused vback_porch;
+	unsigned int vtotal_lines, __maybe_unused vfieldrate_est;
+	unsigned int __maybe_unused hperiod;
+	unsigned int vfield_rate, __maybe_unused vframe_rate;
 	int left_margin, right_margin;
 	unsigned int total_active_pixels, ideal_duty_cycle;
 	unsigned int hblank, total_pixels, pixel_freq;

drivers/gpu/drm/exynos/exynos_drm_dsi.c

@@ -1378,6 +1378,7 @@ static void exynos_dsi_unregister_te_irq(struct exynos_dsi *dsi)
 static void exynos_dsi_enable(struct drm_encoder *encoder)
 {
 	struct exynos_dsi *dsi = encoder_to_dsi(encoder);
+	struct drm_bridge *iter;
 	int ret;
 
 	if (dsi->state & DSIM_STATE_ENABLED)
@@ -1391,7 +1392,11 @@ static void exynos_dsi_enable(struct drm_encoder *encoder)
 		if (ret < 0)
 			goto err_put_sync;
 	} else {
-		drm_bridge_chain_pre_enable(dsi->out_bridge);
+		list_for_each_entry_reverse(iter, &dsi->bridge_chain,
+					    chain_node) {
+			if (iter->funcs->pre_enable)
+				iter->funcs->pre_enable(iter);
+		}
 	}
 
 	exynos_dsi_set_display_mode(dsi);
@@ -1402,7 +1407,10 @@ static void exynos_dsi_enable(struct drm_encoder *encoder)
 		if (ret < 0)
 			goto err_display_disable;
 	} else {
-		drm_bridge_chain_enable(dsi->out_bridge);
+		list_for_each_entry(iter, &dsi->bridge_chain, chain_node) {
+			if (iter->funcs->enable)
+				iter->funcs->enable(iter);
+		}
 	}
 
 	dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE;
@@ -1420,6 +1428,7 @@ static void exynos_dsi_enable(struct drm_encoder *encoder)
 static void exynos_dsi_disable(struct drm_encoder *encoder)
 {
 	struct exynos_dsi *dsi = encoder_to_dsi(encoder);
+	struct drm_bridge *iter;
 
 	if (!(dsi->state & DSIM_STATE_ENABLED))
 		return;
@@ -1427,10 +1436,20 @@ static void exynos_dsi_disable(struct drm_encoder *encoder)
 	dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE;
 
 	drm_panel_disable(dsi->panel);
-	drm_bridge_chain_disable(dsi->out_bridge);
+
+	list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) {
+		if (iter->funcs->disable)
+			iter->funcs->disable(iter);
+	}
+
 	exynos_dsi_set_display_enable(dsi, false);
 	drm_panel_unprepare(dsi->panel);
-	drm_bridge_chain_post_disable(dsi->out_bridge);
+
+	list_for_each_entry(iter, &dsi->bridge_chain, chain_node) {
+		if (iter->funcs->post_disable)
+			iter->funcs->post_disable(iter);
+	}
+
 	dsi->state &= ~DSIM_STATE_ENABLED;
 	pm_runtime_put_sync(dsi->dev);
 }
@@ -1523,7 +1542,7 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 	if (out_bridge) {
 		drm_bridge_attach(encoder, out_bridge, NULL);
 		dsi->out_bridge = out_bridge;
-		list_splice(&encoder->bridge_chain, &dsi->bridge_chain);
+		list_splice_init(&encoder->bridge_chain, &dsi->bridge_chain);
 	} else {
 		int ret = exynos_dsi_create_connector(encoder);
 

drivers/gpu/drm/gma500/psb_irq.c

@@ -470,12 +470,11 @@ void psb_irq_turn_off_dpst(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv =
 	    (struct drm_psb_private *) dev->dev_private;
-	u32 hist_reg;
 	u32 pwm_reg;
 
 	if (gma_power_begin(dev, false)) {
 		PSB_WVDC32(0x00000000, HISTOGRAM_INT_CONTROL);
-		hist_reg = PSB_RVDC32(HISTOGRAM_INT_CONTROL);
+		PSB_RVDC32(HISTOGRAM_INT_CONTROL);
 
 		psb_disable_pipestat(dev_priv, 0, PIPE_DPST_EVENT_ENABLE);
 

drivers/gpu/drm/lima/lima_sched.c

@@ -255,13 +255,17 @@ static struct dma_fence *lima_sched_run_job(struct drm_sched_job *job)
 	return task->fence;
 }
 
-static void lima_sched_handle_error_task(struct lima_sched_pipe *pipe,
-					 struct lima_sched_task *task)
+static void lima_sched_timedout_job(struct drm_sched_job *job)
 {
+	struct lima_sched_pipe *pipe = to_lima_pipe(job->sched);
+	struct lima_sched_task *task = to_lima_task(job);
+
+	if (!pipe->error)
+		DRM_ERROR("lima job timeout\n");
+
 	drm_sched_stop(&pipe->base, &task->base);
 
-	if (task)
-		drm_sched_increase_karma(&task->base);
+	drm_sched_increase_karma(&task->base);
 
 	pipe->task_error(pipe);
 
@@ -284,16 +288,6 @@ static void lima_sched_handle_error_task(struct lima_sched_pipe *pipe,
 	drm_sched_start(&pipe->base, true);
 }
 
-static void lima_sched_timedout_job(struct drm_sched_job *job)
-{
-	struct lima_sched_pipe *pipe = to_lima_pipe(job->sched);
-	struct lima_sched_task *task = to_lima_task(job);
-
-	DRM_ERROR("lima job timeout\n");
-
-	lima_sched_handle_error_task(pipe, task);
-}
-
 static void lima_sched_free_job(struct drm_sched_job *job)
 {
 	struct lima_sched_task *task = to_lima_task(job);
@@ -318,15 +312,6 @@ static const struct drm_sched_backend_ops lima_sched_ops = {
 	.free_job = lima_sched_free_job,
 };
 
-static void lima_sched_error_work(struct work_struct *work)
-{
-	struct lima_sched_pipe *pipe =
-		container_of(work, struct lima_sched_pipe, error_work);
-	struct lima_sched_task *task = pipe->current_task;
-
-	lima_sched_handle_error_task(pipe, task);
-}
-
 int lima_sched_pipe_init(struct lima_sched_pipe *pipe, const char *name)
 {
 	unsigned int timeout = lima_sched_timeout_ms > 0 ?
@@ -335,8 +320,6 @@ int lima_sched_pipe_init(struct lima_sched_pipe *pipe, const char *name)
 	pipe->fence_context = dma_fence_context_alloc(1);
 	spin_lock_init(&pipe->fence_lock);
 
-	INIT_WORK(&pipe->error_work, lima_sched_error_work);
-
 	return drm_sched_init(&pipe->base, &lima_sched_ops, 1, 0,
 			      msecs_to_jiffies(timeout), name);
 }
@@ -349,7 +332,7 @@ void lima_sched_pipe_fini(struct lima_sched_pipe *pipe)
 void lima_sched_pipe_task_done(struct lima_sched_pipe *pipe)
 {
 	if (pipe->error)
-		schedule_work(&pipe->error_work);
+		drm_sched_fault(&pipe->base);
 	else {
 		struct lima_sched_task *task = pipe->current_task;
 

drivers/gpu/drm/lima/lima_sched.h

@@ -68,8 +68,6 @@ struct lima_sched_pipe {
 	void (*task_fini)(struct lima_sched_pipe *pipe);
 	void (*task_error)(struct lima_sched_pipe *pipe);
 	void (*task_mmu_error)(struct lima_sched_pipe *pipe);
-
-	struct work_struct error_work;
 };
 
 int lima_sched_task_init(struct lima_sched_task *task,

drivers/gpu/drm/meson/meson_drv.h

@@ -135,7 +135,7 @@ struct meson_drm {
 	} venc;
 
 	struct {
-		dma_addr_t addr_phys;
+		dma_addr_t addr_dma;
 		uint32_t *addr;
 		unsigned int offset;
 	} rdma;

drivers/gpu/drm/meson/meson_rdma.c

@@ -27,7 +27,7 @@ int meson_rdma_init(struct meson_drm *priv)
 		/* Allocate a PAGE buffer */
 		priv->rdma.addr =
 			dma_alloc_coherent(priv->dev, SZ_4K,
-					   &priv->rdma.addr_phys,
+					   &priv->rdma.addr_dma,
 					   GFP_KERNEL);
 		if (!priv->rdma.addr)
 			return -ENOMEM;
@@ -47,16 +47,16 @@ int meson_rdma_init(struct meson_drm *priv)
 
 void meson_rdma_free(struct meson_drm *priv)
 {
-	if (!priv->rdma.addr && !priv->rdma.addr_phys)
+	if (!priv->rdma.addr && !priv->rdma.addr_dma)
 		return;
 
 	meson_rdma_stop(priv);
 
 	dma_free_coherent(priv->dev, SZ_4K,
-			  priv->rdma.addr, priv->rdma.addr_phys);
+			  priv->rdma.addr, priv->rdma.addr_dma);
 
 	priv->rdma.addr = NULL;
-	priv->rdma.addr_phys = (dma_addr_t)NULL;
+	priv->rdma.addr_dma = (dma_addr_t)0;
 }
 
 void meson_rdma_setup(struct meson_drm *priv)
@@ -118,11 +118,11 @@ void meson_rdma_flush(struct meson_drm *priv)
 	meson_rdma_stop(priv);
 
 	/* Start of Channel 1 register writes buffer */
-	writel(priv->rdma.addr_phys,
+	writel(priv->rdma.addr_dma,
 	       priv->io_base + _REG(RDMA_AHB_START_ADDR_1));
 
 	/* Last byte on Channel 1 register writes buffer */
-	writel(priv->rdma.addr_phys + (priv->rdma.offset * RDMA_DESC_SIZE) - 1,
+	writel(priv->rdma.addr_dma + (priv->rdma.offset * RDMA_DESC_SIZE) - 1,
 	       priv->io_base + _REG(RDMA_AHB_END_ADDR_1));
 
 	/* Trigger Channel 1 on VSYNC event */

drivers/gpu/drm/omapdrm/dss/dispc.c

@@ -393,8 +393,7 @@ static void dispc_get_reg_field(struct dispc_device *dispc,
 				enum dispc_feat_reg_field id,
 				u8 *start, u8 *end)
 {
-	if (id >= dispc->feat->num_reg_fields)
-		BUG();
+	BUG_ON(id >= dispc->feat->num_reg_fields);
 
 	*start = dispc->feat->reg_fields[id].start;
 	*end = dispc->feat->reg_fields[id].end;

drivers/gpu/drm/panel/Kconfig

@@ -338,6 +338,17 @@ config DRM_PANEL_SITRONIX_ST7789V
 	  Say Y here if you want to enable support for the Sitronix
 	  ST7789V controller for 240x320 LCD panels
 
+config DRM_PANEL_SONY_ACX424AKP
+	tristate "Sony ACX424AKP DSI command mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+	help
+	  Say Y here if you want to enable the Sony ACX424 display
+	  panel. This panel supports DSI in both command and video
+	  mode.
+
 config DRM_PANEL_SONY_ACX565AKM
 	tristate "Sony ACX565AKM panel"
 	depends on GPIOLIB && OF && SPI

drivers/gpu/drm/panel/Makefile

@@ -35,6 +35,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
+obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
 obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o

drivers/gpu/drm/panel/panel-simple.c

@@ -629,6 +629,35 @@ static const struct panel_desc auo_b101xtn01 = {
 	},
 };
 
+static const struct drm_display_mode auo_b116xak01_mode = {
+	.clock = 69300,
+	.hdisplay = 1366,
+	.hsync_start = 1366 + 48,
+	.hsync_end = 1366 + 48 + 32,
+	.htotal = 1366 + 48 + 32 + 10,
+	.vdisplay = 768,
+	.vsync_start = 768 + 4,
+	.vsync_end = 768 + 4 + 6,
+	.vtotal = 768 + 4 + 6 + 15,
+	.vrefresh = 60,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc auo_b116xak01 = {
+	.modes = &auo_b116xak01_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 256,
+		.height = 144,
+	},
+	.delay = {
+		.hpd_absent_delay = 200,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+	.connector_type = DRM_MODE_CONNECTOR_eDP,
+};
+
 static const struct drm_display_mode auo_b116xw03_mode = {
 	.clock = 70589,
 	.hdisplay = 1366,
@@ -1008,6 +1037,38 @@ static const struct panel_desc boe_nv101wxmn51 = {
 	},
 };
 
+static const struct drm_display_mode boe_nv140fhmn49_modes[] = {
+	{
+		.clock = 148500,
+		.hdisplay = 1920,
+		.hsync_start = 1920 + 48,
+		.hsync_end = 1920 + 48 + 32,
+		.htotal = 2200,
+		.vdisplay = 1080,
+		.vsync_start = 1080 + 3,
+		.vsync_end = 1080 + 3 + 5,
+		.vtotal = 1125,
+		.vrefresh = 60,
+	},
+};
+
+static const struct panel_desc boe_nv140fhmn49 = {
+	.modes = boe_nv140fhmn49_modes,
+	.num_modes = ARRAY_SIZE(boe_nv140fhmn49_modes),
+	.bpc = 6,
+	.size = {
+		.width = 309,
+		.height = 174,
+	},
+	.delay = {
+		.prepare = 210,
+		.enable = 50,
+		.unprepare = 160,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+	.connector_type = DRM_MODE_CONNECTOR_eDP,
+};
+
 static const struct drm_display_mode cdtech_s043wq26h_ct7_mode = {
 	.clock = 9000,
 	.hdisplay = 480,
@@ -2553,6 +2614,30 @@ static const struct panel_desc samsung_ltn140at29_301 = {
 	},
 };
 
+static const struct display_timing satoz_sat050at40h12r2_timing = {
+	.pixelclock = {33300000, 33300000, 50000000},
+	.hactive = {800, 800, 800},
+	.hfront_porch = {16, 210, 354},
+	.hback_porch = {46, 46, 46},
+	.hsync_len = {1, 1, 40},
+	.vactive = {480, 480, 480},
+	.vfront_porch = {7, 22, 147},
+	.vback_porch = {23, 23, 23},
+	.vsync_len = {1, 1, 20},
+};
+
+static const struct panel_desc satoz_sat050at40h12r2 = {
+	.timings = &satoz_sat050at40h12r2_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 108,
+		.height = 65,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct drm_display_mode sharp_ld_d5116z01b_mode = {
 	.clock = 168480,
 	.hdisplay = 1920,
@@ -3125,6 +3210,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "auo,b101xtn01",
 		.data = &auo_b101xtn01,
+	}, {
+		.compatible = "auo,b116xa01",
+		.data = &auo_b116xak01,
 	}, {
 		.compatible = "auo,b116xw03",
 		.data = &auo_b116xw03,
@@ -3167,6 +3255,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "boe,nv101wxmn51",
 		.data = &boe_nv101wxmn51,
+	}, {
+		.compatible = "boe,nv140fhmn49",
+		.data = &boe_nv140fhmn49,
 	}, {
 		.compatible = "cdtech,s043wq26h-ct7",
 		.data = &cdtech_s043wq26h_ct7,
@@ -3356,6 +3447,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "samsung,ltn140at29-301",
 		.data = &samsung_ltn140at29_301,
+	}, {
+		.compatible = "satoz,sat050at40h12r2",
+		.data = &satoz_sat050at40h12r2,
 	}, {
 		.compatible = "sharp,ld-d5116z01b",
 		.data = &sharp_ld_d5116z01b,

drivers/gpu/drm/rcar-du/rcar_lvds.c

@@ -590,9 +590,8 @@ static void __rcar_lvds_atomic_enable(struct drm_bridge *bridge,
 }
 
 static void rcar_lvds_atomic_enable(struct drm_bridge *bridge,
-				    struct drm_bridge_state *old_bridge_state)
+				    struct drm_atomic_state *state)
 {
-	struct drm_atomic_state *state = old_bridge_state->base.state;
 	struct drm_connector *connector;
 	struct drm_crtc *crtc;
 
@@ -604,7 +603,7 @@ static void rcar_lvds_atomic_enable(struct drm_bridge *bridge,
 }
 
 static void rcar_lvds_atomic_disable(struct drm_bridge *bridge,
-				     struct drm_bridge_state *old_bridge_state)
+				     struct drm_atomic_state *state)
 {
 	struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge);
 
@@ -619,8 +618,7 @@ static void rcar_lvds_atomic_disable(struct drm_bridge *bridge,
 
 	/* Disable the companion LVDS encoder in dual-link mode. */
 	if (lvds->link_type != RCAR_LVDS_SINGLE_LINK && lvds->companion)
-		lvds->companion->funcs->atomic_disable(lvds->companion,
-						       old_bridge_state);
+		lvds->companion->funcs->atomic_disable(lvds->companion, state);
 
 	clk_disable_unprepare(lvds->clocks.mod);
 }

drivers/gpu/drm/sun4i/sun4i_backend.c

@@ -856,6 +856,13 @@ static int sun4i_backend_bind(struct device *dev, struct device *master,
 		ret = PTR_ERR(backend->mod_clk);
 		goto err_disable_bus_clk;
 	}
+
+	ret = clk_set_rate_exclusive(backend->mod_clk, 300000000);
+	if (ret) {
+		dev_err(dev, "Couldn't set the module clock frequency\n");
+		goto err_disable_bus_clk;
+	}
+
 	clk_prepare_enable(backend->mod_clk);
 
 	backend->ram_clk = devm_clk_get(dev, "ram");
@@ -932,6 +939,7 @@ static int sun4i_backend_bind(struct device *dev, struct device *master,
 err_disable_ram_clk:
 	clk_disable_unprepare(backend->ram_clk);
 err_disable_mod_clk:
+	clk_rate_exclusive_put(backend->mod_clk);
 	clk_disable_unprepare(backend->mod_clk);
 err_disable_bus_clk:
 	clk_disable_unprepare(backend->bus_clk);
@@ -952,6 +960,7 @@ static void sun4i_backend_unbind(struct device *dev, struct device *master,
 		sun4i_backend_free_sat(dev);
 
 	clk_disable_unprepare(backend->ram_clk);
+	clk_rate_exclusive_put(backend->mod_clk);
 	clk_disable_unprepare(backend->mod_clk);
 	clk_disable_unprepare(backend->bus_clk);
 	reset_control_assert(backend->reset);

drivers/gpu/drm/sun4i/sun6i_drc.c

@@ -56,6 +56,13 @@ static int sun6i_drc_bind(struct device *dev, struct device *master,
 		ret = PTR_ERR(drc->mod_clk);
 		goto err_disable_bus_clk;
 	}
+
+	ret = clk_set_rate_exclusive(drc->mod_clk, 300000000);
+	if (ret) {
+		dev_err(dev, "Couldn't set the module clock frequency\n");
+		goto err_disable_bus_clk;
+	}
+
 	clk_prepare_enable(drc->mod_clk);
 
 	return 0;
@@ -72,6 +79,7 @@ static void sun6i_drc_unbind(struct device *dev, struct device *master,
 {
 	struct sun6i_drc *drc = dev_get_drvdata(dev);
 
+	clk_rate_exclusive_put(drc->mod_clk);
 	clk_disable_unprepare(drc->mod_clk);
 	clk_disable_unprepare(drc->bus_clk);
 	reset_control_assert(drc->reset);

drivers/gpu/drm/tegra/hdmi.c

@@ -1430,9 +1430,10 @@ static int tegra_hdmi_init(struct host1x_client *client)
 
 	hdmi->output.dev = client->dev;
 
-	drm_connector_init(drm, &hdmi->output.connector,
-			   &tegra_hdmi_connector_funcs,
-			   DRM_MODE_CONNECTOR_HDMIA);
+	drm_connector_init_with_ddc(drm, &hdmi->output.connector,
+				    &tegra_hdmi_connector_funcs,
+				    DRM_MODE_CONNECTOR_HDMIA,
+				    hdmi->output.ddc);
 	drm_connector_helper_add(&hdmi->output.connector,
 				 &tegra_hdmi_connector_helper_funcs);
 	hdmi->output.connector.dpms = DRM_MODE_DPMS_OFF;

drivers/gpu/drm/tegra/sor.c

@@ -3086,9 +3086,10 @@ static int tegra_sor_init(struct host1x_client *client)
 
 	sor->output.dev = sor->dev;
 
-	drm_connector_init(drm, &sor->output.connector,
-			   &tegra_sor_connector_funcs,
-			   connector);
+	drm_connector_init_with_ddc(drm, &sor->output.connector,
+				    &tegra_sor_connector_funcs,
+				    connector,
+				    sor->output.ddc);
 	drm_connector_helper_add(&sor->output.connector,
 				 &tegra_sor_connector_helper_funcs);
 	sor->output.connector.dpms = DRM_MODE_DPMS_OFF;

drivers/gpu/drm/udl/Kconfig

@@ -2,9 +2,8 @@
 config DRM_UDL
 	tristate "DisplayLink"
 	depends on DRM
-	depends on USB_SUPPORT
+	depends on USB
 	depends on USB_ARCH_HAS_HCD
-	select USB
 	select DRM_GEM_SHMEM_HELPER
 	select DRM_KMS_HELPER
 	help

drivers/gpu/drm/vc4/vc4_dsi.c

@@ -753,10 +753,19 @@ static void vc4_dsi_encoder_disable(struct drm_encoder *encoder)
 	struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder);
 	struct vc4_dsi *dsi = vc4_encoder->dsi;
 	struct device *dev = &dsi->pdev->dev;
+	struct drm_bridge *iter;
+
+	list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) {
+		if (iter->funcs->disable)
+			iter->funcs->disable(iter);
+	}
 
-	drm_bridge_chain_disable(dsi->bridge);
 	vc4_dsi_ulps(dsi, true);
-	drm_bridge_chain_post_disable(dsi->bridge);
+
+	list_for_each_entry_from(iter, &dsi->bridge_chain, chain_node) {
+		if (iter->funcs->post_disable)
+			iter->funcs->post_disable(iter);
+	}
 
 	clk_disable_unprepare(dsi->pll_phy_clock);
 	clk_disable_unprepare(dsi->escape_clock);
@@ -824,6 +833,7 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
 	struct vc4_dsi *dsi = vc4_encoder->dsi;
 	struct device *dev = &dsi->pdev->dev;
 	bool debug_dump_regs = false;
+	struct drm_bridge *iter;
 	unsigned long hs_clock;
 	u32 ui_ns;
 	/* Minimum LP state duration in escape clock cycles. */
@@ -1056,7 +1066,10 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
 
 	vc4_dsi_ulps(dsi, false);
 
-	drm_bridge_chain_pre_enable(dsi->bridge);
+	list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) {
+		if (iter->funcs->pre_enable)
+			iter->funcs->pre_enable(iter);
+	}
 
 	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
 		DSI_PORT_WRITE(DISP0_CTRL,
@@ -1073,7 +1086,10 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
 			       DSI_DISP0_ENABLE);
 	}
 
-	drm_bridge_chain_enable(dsi->bridge);
+	list_for_each_entry(iter, &dsi->bridge_chain, chain_node) {
+		if (iter->funcs->enable)
+			iter->funcs->enable(iter);
+	}
 
 	if (debug_dump_regs) {
 		struct drm_printer p = drm_info_printer(&dsi->pdev->dev);
@@ -1613,7 +1629,7 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
 	 * from our driver, since we need to sequence them within the
 	 * encoder's enable/disable paths.
 	 */
-	list_splice(&dsi->encoder->bridge_chain, &dsi->bridge_chain);
+	list_splice_init(&dsi->encoder->bridge_chain, &dsi->bridge_chain);
 
 	if (dsi->port == 0)
 		vc4_debugfs_add_regset32(drm, "dsi0_regs", &dsi->regset);
@@ -1639,7 +1655,7 @@ static void vc4_dsi_unbind(struct device *dev, struct device *master,
 	 * Restore the bridge_chain so the bridge detach procedure can happen
 	 * normally.
 	 */
-	list_splice(&dsi->bridge_chain, &dsi->encoder->bridge_chain);
+	list_splice_init(&dsi->bridge_chain, &dsi->encoder->bridge_chain);
 	vc4_dsi_encoder_destroy(dsi->encoder);
 
 	if (dsi->port == 1)

drivers/gpu/drm/vc4/vc4_hdmi.c

@@ -267,7 +267,8 @@ static const struct drm_connector_helper_funcs vc4_hdmi_connector_helper_funcs =
 };
 
 static struct drm_connector *vc4_hdmi_connector_init(struct drm_device *dev,
-						     struct drm_encoder *encoder)
+						     struct drm_encoder *encoder,
+						     struct i2c_adapter *ddc)
 {
 	struct drm_connector *connector;
 	struct vc4_hdmi_connector *hdmi_connector;
@@ -281,8 +282,10 @@ static struct drm_connector *vc4_hdmi_connector_init(struct drm_device *dev,
 
 	hdmi_connector->encoder = encoder;
 
-	drm_connector_init(dev, connector, &vc4_hdmi_connector_funcs,
-			   DRM_MODE_CONNECTOR_HDMIA);
+	drm_connector_init_with_ddc(dev, connector,
+				    &vc4_hdmi_connector_funcs,
+				    DRM_MODE_CONNECTOR_HDMIA,
+				    ddc);
 	drm_connector_helper_add(connector, &vc4_hdmi_connector_helper_funcs);
 
 	/* Create and attach TV margin props to this connector. */
@@ -1395,7 +1398,8 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 			 DRM_MODE_ENCODER_TMDS, NULL);
 	drm_encoder_helper_add(hdmi->encoder, &vc4_hdmi_encoder_helper_funcs);
 
-	hdmi->connector = vc4_hdmi_connector_init(drm, hdmi->encoder);
+	hdmi->connector =
+		vc4_hdmi_connector_init(drm, hdmi->encoder, hdmi->ddc);
 	if (IS_ERR(hdmi->connector)) {
 		ret = PTR_ERR(hdmi->connector);
 		goto err_destroy_encoder;

drivers/gpu/drm/zte/zx_hdmi.c

@@ -319,8 +319,10 @@ static int zx_hdmi_register(struct drm_device *drm, struct zx_hdmi *hdmi)
 
 	hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
 
-	drm_connector_init(drm, &hdmi->connector, &zx_hdmi_connector_funcs,
-			   DRM_MODE_CONNECTOR_HDMIA);
+	drm_connector_init_with_ddc(drm, &hdmi->connector,
+				    &zx_hdmi_connector_funcs,
+				    DRM_MODE_CONNECTOR_HDMIA,
+				    &hdmi->ddc->adap);
 	drm_connector_helper_add(&hdmi->connector,
 				 &zx_hdmi_connector_helper_funcs);
 

drivers/gpu/drm/zte/zx_vga.c

@@ -165,8 +165,10 @@ static int zx_vga_register(struct drm_device *drm, struct zx_vga *vga)
 
 	vga->connector.polled = DRM_CONNECTOR_POLL_HPD;
 
-	ret = drm_connector_init(drm, connector, &zx_vga_connector_funcs,
-				 DRM_MODE_CONNECTOR_VGA);
+	ret = drm_connector_init_with_ddc(drm, connector,
+					  &zx_vga_connector_funcs,
+					  DRM_MODE_CONNECTOR_VGA,
+					  &vga->ddc->adap);
 	if (ret) {
 		DRM_DEV_ERROR(dev, "failed to init connector: %d\n", ret);
 		goto clean_encoder;

drivers/video/fbdev/mmp/hw/mmp_ctrl.c

@@ -456,7 +456,6 @@ static int mmphw_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
-		dev_err(&pdev->dev, "%s: no IRQ defined\n", __func__);
 		ret = -ENOENT;
 		goto failed;
 	}

include/drm/drm_atomic.h

@@ -669,9 +669,6 @@ __drm_atomic_get_current_plane_state(struct drm_atomic_state *state,
 	return plane->state;
 }
 
-int __must_check
-drm_atomic_add_encoder_bridges(struct drm_atomic_state *state,
-			       struct drm_encoder *encoder);
 int __must_check
 drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
 				   struct drm_crtc *crtc);

include/drm/drm_fb_cma_helper.h

@@ -2,6 +2,8 @@
 #ifndef __DRM_FB_CMA_HELPER_H__
 #define __DRM_FB_CMA_HELPER_H__
 
+#include <linux/types.h>
+
 struct drm_framebuffer;
 struct drm_plane_state;