caif: remove caif_shm

caif_shm is an old implementation
caif_shm will be replaced by caif_virtio

[ As explained by Linus Walleij: "U5500 used this, but was cancelled
  and the silicon did not reach anyone outside ST-Ericsson.  Then for
  the next platforms, we have gone for the leaner & cleaner approach
  of using virtio, rpmesg and rproc." ]
Signed-off-by: Erwan Yvin <erwan.yvin@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sjur Brendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/caif/Kconfig

@@ -32,13 +32,6 @@ config CAIF_SPI_SYNC
 	help to synchronize to the next transfer in case of over or under-runs.
 	This option also needs to be enabled on the modem.
 
-config CAIF_SHM
-	tristate "CAIF shared memory protocol driver"
-	depends on CAIF && U5500_MBOX
-	default n
-	---help---
-	The CAIF shared memory protocol driver for the STE UX5500 platform.
-
 config CAIF_HSI
        tristate "CAIF HSI transport driver"
        depends on CAIF

drivers/net/caif/Makefile

@@ -7,9 +7,5 @@ obj-$(CONFIG_CAIF_TTY) += caif_serial.o
 cfspi_slave-objs := caif_spi.o caif_spi_slave.o
 obj-$(CONFIG_CAIF_SPI_SLAVE) += cfspi_slave.o
 
-# Shared memory
-caif_shm-objs := caif_shmcore.o caif_shm_u5500.o
-obj-$(CONFIG_CAIF_SHM) += caif_shm.o
-
 # HSI interface
 obj-$(CONFIG_CAIF_HSI) += caif_hsi.o

drivers/net/caif/caif_shm_u5500.c

-/*
- * Copyright (C) ST-Ericsson AB 2010
- * Contact: Sjur Brendeland / sjur.brandeland@stericsson.com
- * Author:  Amarnath Revanna / amarnath.bangalore.revanna@stericsson.com
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <mach/mbox-db5500.h>
-#include <net/caif/caif_shm.h>
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("CAIF Shared Memory protocol driver");
-
-#define MAX_SHM_INSTANCES	1
-
-enum {
-	MBX_ACC0,
-	MBX_ACC1,
-	MBX_DSP
-};
-
-static struct shmdev_layer shmdev_lyr[MAX_SHM_INSTANCES];
-
-static unsigned int shm_start;
-static unsigned int shm_size;
-
-module_param(shm_size, uint  , 0440);
-MODULE_PARM_DESC(shm_total_size, "Start of SHM shared memory");
-
-module_param(shm_start, uint  , 0440);
-MODULE_PARM_DESC(shm_total_start, "Total Size of SHM shared memory");
-
-static int shmdev_send_msg(u32 dev_id, u32 mbx_msg)
-{
-	/* Always block until msg is written successfully */
-	mbox_send(shmdev_lyr[dev_id].hmbx, mbx_msg, true);
-	return 0;
-}
-
-static int shmdev_mbx_setup(void *pshmdrv_cb, struct shmdev_layer *pshm_dev,
-							 void *pshm_drv)
-{
-	/*
-	 * For UX5500, we have only 1 SHM instance which uses MBX0
-	 * for communication with the peer modem
-	 */
-	pshm_dev->hmbx = mbox_setup(MBX_ACC0, pshmdrv_cb, pshm_drv);
-
-	if (!pshm_dev->hmbx)
-		return -ENODEV;
-	else
-		return 0;
-}
-
-static int __init caif_shmdev_init(void)
-{
-	int i, result;
-
-	/* Loop is currently overkill, there is only one instance */
-	for (i = 0; i < MAX_SHM_INSTANCES; i++) {
-
-		shmdev_lyr[i].shm_base_addr = shm_start;
-		shmdev_lyr[i].shm_total_sz = shm_size;
-
-		if (((char *)shmdev_lyr[i].shm_base_addr == NULL)
-			       || (shmdev_lyr[i].shm_total_sz <= 0))	{
-			pr_warn("ERROR,"
-				"Shared memory Address and/or Size incorrect"
-				", Bailing out ...\n");
-			result = -EINVAL;
-			goto clean;
-		}
-
-		pr_info("SHM AREA (instance %d) STARTS"
-			" AT %p\n", i, (char *)shmdev_lyr[i].shm_base_addr);
-
-		shmdev_lyr[i].shm_id = i;
-		shmdev_lyr[i].pshmdev_mbxsend = shmdev_send_msg;
-		shmdev_lyr[i].pshmdev_mbxsetup = shmdev_mbx_setup;
-
-		/*
-		 * Finally, CAIF core module is called with details in place:
-		 * 1. SHM base address
-		 * 2. SHM size
-		 * 3. MBX handle
-		 */
-		result = caif_shmcore_probe(&shmdev_lyr[i]);
-		if (result) {
-			pr_warn("ERROR[%d],"
-				"Could not probe SHM core (instance %d)"
-				" Bailing out ...\n", result, i);
-			goto clean;
-		}
-	}
-
-	return 0;
-
-clean:
-	/*
-	 * For now, we assume that even if one instance of SHM fails, we bail
-	 * out of the driver support completely. For this, we need to release
-	 * any memory allocated and unregister any instance of SHM net device.
-	 */
-	for (i = 0; i < MAX_SHM_INSTANCES; i++) {
-		if (shmdev_lyr[i].pshm_netdev)
-			unregister_netdev(shmdev_lyr[i].pshm_netdev);
-	}
-	return result;
-}
-
-static void __exit caif_shmdev_exit(void)
-{
-	int i;
-
-	for (i = 0; i < MAX_SHM_INSTANCES; i++) {
-		caif_shmcore_remove(shmdev_lyr[i].pshm_netdev);
-		kfree((void *)shmdev_lyr[i].shm_base_addr);
-	}
-
-}
-
-module_init(caif_shmdev_init);
-module_exit(caif_shmdev_exit);

include/net/caif/caif_shm.h

-/*
- * Copyright (C) ST-Ericsson AB 2010
- * Contact: Sjur Brendeland / sjur.brandeland@stericsson.com
- * Author: Amarnath Revanna / amarnath.bangalore.revanna@stericsson.com
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef CAIF_SHM_H_
-#define CAIF_SHM_H_
-
-struct shmdev_layer {
-	u32 shm_base_addr;
-	u32 shm_total_sz;
-	u32 shm_id;
-	u32 shm_loopback;
-	void *hmbx;
-	int (*pshmdev_mbxsend) (u32 shm_id, u32 mbx_msg);
-	int (*pshmdev_mbxsetup) (void *pshmdrv_cb,
-				struct shmdev_layer *pshm_dev, void *pshm_drv);
-	struct net_device *pshm_netdev;
-};
-
-extern int caif_shmcore_probe(struct shmdev_layer *pshm_dev);
-extern void caif_shmcore_remove(struct net_device *pshm_netdev);
-
-#endif