net: encx24j600: move rev announcement to probe function

When encx24j600 is open and closed many times due to userspace polling the
interface, the log gets noise with this log message.

Moving this to encx24j600_spi_probe function where it belongs.
Signed-off-by: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/microchip/encx24j600.c

@@ -600,22 +600,11 @@ static void encx24j600_set_rxfilter_mode(struct encx24j600_priv *priv)
 
 static int encx24j600_hw_init(struct encx24j600_priv *priv)
 {
-	struct net_device *dev = priv->ndev;
 	int ret = 0;
-	u16 eidled;
 	u16 macon2;
 
 	priv->hw_enabled = false;
 
-	eidled = encx24j600_read_reg(priv, EIDLED);
-	if (((eidled & DEVID_MASK) >> DEVID_SHIFT) != ENCX24J600_DEV_ID) {
-		ret = -EINVAL;
-		goto err_out;
-	}
-
-	netif_info(priv, drv, dev, "Silicon rev ID: 0x%02x\n",
-		   (eidled & REVID_MASK) >> REVID_SHIFT);
-
 	/* PHY Leds: link status,
 	 * LEDA: Link State + collision events
 	 * LEDB: Link State + transmit/receive events
@@ -655,7 +644,6 @@ static int encx24j600_hw_init(struct encx24j600_priv *priv)
 	if (netif_msg_hw(priv))
 		encx24j600_dump_config(priv, "Hw is initialized");
 
-err_out:
 	return ret;
 }
 
@@ -1004,6 +992,7 @@ static int encx24j600_spi_probe(struct spi_device *spi)
 
 	struct net_device *ndev;
 	struct encx24j600_priv *priv;
+	u16 eidled;
 
 	ndev = alloc_etherdev(sizeof(struct encx24j600_priv));
 
@@ -1072,10 +1061,21 @@ static int encx24j600_spi_probe(struct spi_device *spi)
 		goto out_free;
 	}
 
+	eidled = encx24j600_read_reg(priv, EIDLED);
+	if (((eidled & DEVID_MASK) >> DEVID_SHIFT) != ENCX24J600_DEV_ID) {
+		ret = -EINVAL;
+		goto out_unregister;
+	}
+
+	netif_info(priv, probe, ndev, "Silicon rev ID: 0x%02x\n",
+		   (eidled & REVID_MASK) >> REVID_SHIFT);
+
 	netif_info(priv, drv, priv->ndev, "MAC address %pM\n", ndev->dev_addr);
 
 	return ret;
 
+out_unregister:
+	unregister_netdev(priv->ndev);
 out_free:
 	free_netdev(ndev);