Merge tag 'reset-for-4.15' of git://git.pengutronix.de/git/pza/linux into next/drivers

Pull "Reset controller changes for v4.15" from Philipp Zabel:

- add ARC AX10x support,
  merged from a separate branch that is also included in the ARC tree
- add Stratix10 support via socfpga
- unify socfpga, stm32, sunxi, and zx2967 into simple-reset driver
- add Meson GX reset level control and remove an unneeded check
- add Uniphier PXs3 and ethernet reset controls
- add MT7622 reset control dt-bindings header

* tag 'reset-for-4.15' of git://git.pengutronix.de/git/pza/linux:
  reset: zx2967: use the reset-simple driver
  reset: stm32: use the reset-simple driver
  reset: socfpga: use the reset-simple driver
  reset: sunxi: use reset-simple driver
  reset: add reset-simple to unify socfpga, stm32, sunxi, and zx2967
  reset: meson: remove unneeded check in meson_reset_reset
  reset: meson: add level reset support for GX SoC family
  reset: uniphier: add PXs3 reset data
  reset: mediatek: add reset controller dt-bindings required header for MT7622 SoC
  reset: socfpga: build the reset-socfpga for Stratix10 SOC
  reset: uniphier: add ethernet reset control support
  reset: socfpga: fix for 64-bit compilation
  ARC: reset: introduce AXS10x reset driver

Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt

+Binding for the AXS10x reset controller
+
+This binding describes the ARC AXS10x boards custom IP-block which allows
+to control reset signals of selected peripherals. For example DW GMAC, etc...
+This block is controlled via memory-mapped register (AKA CREG) which
+represents up-to 32 reset lines.
+
+As of today only the following lines are used:
+ - DW GMAC - line 5
+
+This binding uses the common reset binding[1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
+Required properties:
+- compatible: should be "snps,axs10x-reset".
+- reg: should always contain pair address - length: for creg reset
+  bits register.
+- #reset-cells: from common reset binding; Should always be set to 1.
+
+Example:
+	reset: reset-controller@11220 {
+		compatible = "snps,axs10x-reset";
+		#reset-cells = <1>;
+		reg = <0x11220 0x4>;
+	};
+
+Specifying reset lines connected to IP modules:
+	ethernet@.... {
+		....
+		resets = <&reset 5>;
+		....
+	};

Documentation/devicetree/bindings/reset/uniphier-reset.txt

@@ -13,6 +13,7 @@ Required properties:
     "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
     "socionext,uniphier-ld11-reset" - for LD11 SoC
     "socionext,uniphier-ld20-reset" - for LD20 SoC
+    "socionext,uniphier-pxs3-reset" - for PXs3 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -44,6 +45,7 @@ Required properties:
     "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
     "socionext,uniphier-ld11-sd-reset"  - for LD11 SoC (SD)
     "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC
+    "socionext,uniphier-pxs3-sd-reset"  - for PXs3 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -74,6 +76,7 @@ Required properties:
     "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
     "socionext,uniphier-ld11-peri-reset" - for LD11 SoC
     "socionext,uniphier-ld20-peri-reset" - for LD20 SoC
+    "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC
 - #reset-cells: should be 1.
 
 Example:

MAINTAINERS

@@ -2136,7 +2136,6 @@ F:	drivers/gpio/gpio-zx.c
 F:	drivers/i2c/busses/i2c-zx2967.c
 F:	drivers/mmc/host/dw_mmc-zx.*
 F:	drivers/pinctrl/zte/
-F:	drivers/reset/reset-zx2967.c
 F:	drivers/soc/zte/
 F:	drivers/thermal/zx2967_thermal.c
 F:	drivers/watchdog/zx2967_wdt.c
@@ -12914,6 +12913,12 @@ F:	arch/arc/plat-axs10x
 F:	arch/arc/boot/dts/ax*
 F:	Documentation/devicetree/bindings/arc/axs10*
 
+SYNOPSYS AXS10x RESET CONTROLLER DRIVER
+M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+S:	Supported
+F:	drivers/reset/reset-axs10x.c
+F:	Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
+
 SYNOPSYS DESIGNWARE DMAC DRIVER
 M:	Viresh Kumar <vireshk@kernel.org>
 M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>

drivers/reset/Kconfig

@@ -28,6 +28,12 @@ config RESET_ATH79
 	  This enables the ATH79 reset controller driver that supports the
 	  AR71xx SoC reset controller.
 
+config RESET_AXS10X
+	bool "AXS10x Reset Driver" if COMPILE_TEST
+	default ARC_PLAT_AXS10X
+	help
+	  This enables the reset controller driver for AXS10x.
+
 config RESET_BERLIN
 	bool "Berlin Reset Driver" if COMPILE_TEST
 	default ARCH_BERLIN
@@ -75,21 +81,21 @@ config RESET_PISTACHIO
 	help
 	  This enables the reset driver for ImgTec Pistachio SoCs.
 
-config RESET_SOCFPGA
-	bool "SoCFPGA Reset Driver" if COMPILE_TEST
-	default ARCH_SOCFPGA
+config RESET_SIMPLE
+	bool "Simple Reset Controller Driver" if COMPILE_TEST
+	default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX
 	help
-	  This enables the reset controller driver for Altera SoCFPGAs.
+	  This enables a simple reset controller driver for reset lines that
+	  that can be asserted and deasserted by toggling bits in a contiguous,
+	  exclusive register space.
 
-config RESET_STM32
-	bool "STM32 Reset Driver" if COMPILE_TEST
-	default ARCH_STM32
-	help
-	  This enables the RCC reset controller driver for STM32 MCUs.
+	  Currently this driver supports Altera SoCFPGAs, the RCC reset
+	  controller in STM32 MCUs, Allwinner SoCs, and ZTE's zx2967 family.
 
 config RESET_SUNXI
 	bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
 	default ARCH_SUNXI
+	select RESET_SIMPLE
 	help
 	  This enables the reset driver for Allwinner SoCs.
 
@@ -121,12 +127,6 @@ config RESET_UNIPHIER
 	  Say Y if you want to control reset signals provided by System Control
 	  block, Media I/O block, Peripheral Block.
 
-config RESET_ZX2967
-	bool "ZTE ZX2967 Reset Driver"
-	depends on ARCH_ZX || COMPILE_TEST
-	help
-	  This enables the reset controller driver for ZTE's zx2967 family.
-
 config RESET_ZYNQ
 	bool "ZYNQ Reset Driver" if COMPILE_TEST
 	default ARCH_ZYNQ

drivers/reset/Makefile

@@ -4,6 +4,7 @@ obj-$(CONFIG_ARCH_STI) += sti/
 obj-$(CONFIG_ARCH_TEGRA) += tegra/
 obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
 obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
+obj-$(CONFIG_RESET_AXS10X) += reset-axs10x.o
 obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
 obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o
 obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
@@ -12,12 +13,10 @@ obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
 obj-$(CONFIG_RESET_MESON) += reset-meson.o
 obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
 obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
-obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
-obj-$(CONFIG_RESET_STM32) += reset-stm32.o
+obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
 obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
-obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o
 obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
 

drivers/reset/reset-axs10x.c

+/*
+ * Copyright (C) 2017 Synopsys.
+ *
+ * Synopsys AXS10x reset driver.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+
+#define to_axs10x_rst(p)	container_of((p), struct axs10x_rst, rcdev)
+
+#define AXS10X_MAX_RESETS	32
+
+struct axs10x_rst {
+	void __iomem			*regs_rst;
+	spinlock_t			lock;
+	struct reset_controller_dev	rcdev;
+};
+
+static int axs10x_reset_reset(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct axs10x_rst *rst = to_axs10x_rst(rcdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&rst->lock, flags);
+	writel(BIT(id), rst->regs_rst);
+	spin_unlock_irqrestore(&rst->lock, flags);
+
+	return 0;
+}
+
+static const struct reset_control_ops axs10x_reset_ops = {
+	.reset	= axs10x_reset_reset,
+};
+
+static int axs10x_reset_probe(struct platform_device *pdev)
+{
+	struct axs10x_rst *rst;
+	struct resource *mem;
+
+	rst = devm_kzalloc(&pdev->dev, sizeof(*rst), GFP_KERNEL);
+	if (!rst)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rst->regs_rst = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(rst->regs_rst))
+		return PTR_ERR(rst->regs_rst);
+
+	spin_lock_init(&rst->lock);
+
+	rst->rcdev.owner = THIS_MODULE;
+	rst->rcdev.ops = &axs10x_reset_ops;
+	rst->rcdev.of_node = pdev->dev.of_node;
+	rst->rcdev.nr_resets = AXS10X_MAX_RESETS;
+
+	return devm_reset_controller_register(&pdev->dev, &rst->rcdev);
+}
+
+static const struct of_device_id axs10x_reset_dt_match[] = {
+	{ .compatible = "snps,axs10x-reset" },
+	{ },
+};
+
+static struct platform_driver axs10x_reset_driver = {
+	.probe	= axs10x_reset_probe,
+	.driver	= {
+		.name = "axs10x-reset",
+		.of_match_table = axs10x_reset_dt_match,
+	},
+};
+builtin_platform_driver(axs10x_reset_driver);
+
+MODULE_AUTHOR("Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys AXS10x reset driver");
+MODULE_LICENSE("GPL v2");

drivers/reset/reset-meson.c

@@ -62,13 +62,16 @@
 #include <linux/reset-controller.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/of_device.h>
 
 #define REG_COUNT	8
 #define BITS_PER_REG	32
+#define LEVEL_OFFSET	0x7c
 
 struct meson_reset {
 	void __iomem *reg_base;
 	struct reset_controller_dev rcdev;
+	spinlock_t lock;
 };
 
 static int meson_reset_reset(struct reset_controller_dev *rcdev,
@@ -80,26 +83,68 @@ static int meson_reset_reset(struct reset_controller_dev *rcdev,
 	unsigned int offset = id % BITS_PER_REG;
 	void __iomem *reg_addr = data->reg_base + (bank << 2);
 
-	if (bank >= REG_COUNT)
-		return -EINVAL;
-
 	writel(BIT(offset), reg_addr);
 
 	return 0;
 }
 
-static const struct reset_control_ops meson_reset_ops = {
+static int meson_reset_level(struct reset_controller_dev *rcdev,
+			    unsigned long id, bool assert)
+{
+	struct meson_reset *data =
+		container_of(rcdev, struct meson_reset, rcdev);
+	unsigned int bank = id / BITS_PER_REG;
+	unsigned int offset = id % BITS_PER_REG;
+	void __iomem *reg_addr = data->reg_base + LEVEL_OFFSET + (bank << 2);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	reg = readl(reg_addr);
+	if (assert)
+		writel(reg & ~BIT(offset), reg_addr);
+	else
+		writel(reg | BIT(offset), reg_addr);
+
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return 0;
+}
+
+static int meson_reset_assert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	return meson_reset_level(rcdev, id, true);
+}
+
+static int meson_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	return meson_reset_level(rcdev, id, false);
+}
+
+static const struct reset_control_ops meson_reset_meson8_ops = {
 	.reset		= meson_reset_reset,
 };
 
+static const struct reset_control_ops meson_reset_gx_ops = {
+	.reset		= meson_reset_reset,
+	.assert		= meson_reset_assert,
+	.deassert	= meson_reset_deassert,
+};
+
 static const struct of_device_id meson_reset_dt_ids[] = {
-	 { .compatible = "amlogic,meson8b-reset", },
-	 { .compatible = "amlogic,meson-gxbb-reset", },
+	 { .compatible = "amlogic,meson8b-reset",
+	   .data = &meson_reset_meson8_ops, },
+	 { .compatible = "amlogic,meson-gxbb-reset",
+	   .data = &meson_reset_gx_ops, },
 	 { /* sentinel */ },
 };
 
 static int meson_reset_probe(struct platform_device *pdev)
 {
+	const struct reset_control_ops *ops;
 	struct meson_reset *data;
 	struct resource *res;
 
@@ -107,6 +152,10 @@ static int meson_reset_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENOMEM;
 
+	ops = of_device_get_match_data(&pdev->dev);
+	if (!ops)
+		return -EINVAL;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	data->reg_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(data->reg_base))
@@ -114,9 +163,11 @@ static int meson_reset_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
+	spin_lock_init(&data->lock);
+
 	data->rcdev.owner = THIS_MODULE;
 	data->rcdev.nr_resets = REG_COUNT * BITS_PER_REG;
-	data->rcdev.ops = &meson_reset_ops;
+	data->rcdev.ops = ops;
 	data->rcdev.of_node = pdev->dev.of_node;
 
 	return devm_reset_controller_register(&pdev->dev, &data->rcdev);

drivers/reset/reset-simple.c

+/*
+ * Simple Reset Controller Driver
+ *
+ * Copyright (C) 2017 Pengutronix, Philipp Zabel <kernel@pengutronix.de>
+ *
+ * Based on Allwinner SoCs Reset Controller driver
+ *
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+
+#include "reset-simple.h"
+
+static inline struct reset_simple_data *
+to_reset_simple_data(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct reset_simple_data, rcdev);
+}
+
+static int reset_simple_update(struct reset_controller_dev *rcdev,
+			       unsigned long id, bool assert)
+{
+	struct reset_simple_data *data = to_reset_simple_data(rcdev);
+	int reg_width = sizeof(u32);
+	int bank = id / (reg_width * BITS_PER_BYTE);
+	int offset = id % (reg_width * BITS_PER_BYTE);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	reg = readl(data->membase + (bank * reg_width));
+	if (assert ^ data->active_low)
+		reg |= BIT(offset);
+	else
+		reg &= ~BIT(offset);
+	writel(reg, data->membase + (bank * reg_width));
+
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return 0;
+}
+
+static int reset_simple_assert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	return reset_simple_update(rcdev, id, true);
+}
+
+static int reset_simple_deassert(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	return reset_simple_update(rcdev, id, false);
+}
+
+static int reset_simple_status(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct reset_simple_data *data = to_reset_simple_data(rcdev);
+	int reg_width = sizeof(u32);
+	int bank = id / (reg_width * BITS_PER_BYTE);
+	int offset = id % (reg_width * BITS_PER_BYTE);
+	u32 reg;
+
+	reg = readl(data->membase + (bank * reg_width));
+
+	return !(reg & BIT(offset)) ^ !data->status_active_low;
+}
+
+const struct reset_control_ops reset_simple_ops = {
+	.assert		= reset_simple_assert,
+	.deassert	= reset_simple_deassert,
+	.status		= reset_simple_status,
+};
+
+/**
+ * struct reset_simple_devdata - simple reset controller properties
+ * @reg_offset: offset between base address and first reset register.
+ * @nr_resets: number of resets. If not set, default to resource size in bits.
+ * @active_low: if true, bits are cleared to assert the reset. Otherwise, bits
+ *              are set to assert the reset.
+ * @status_active_low: if true, bits read back as cleared while the reset is
+ *                     asserted. Otherwise, bits read back as set while the
+ *                     reset is asserted.
+ */
+struct reset_simple_devdata {
+	u32 reg_offset;
+	u32 nr_resets;
+	bool active_low;
+	bool status_active_low;
+};
+
+#define SOCFPGA_NR_BANKS	8
+
+static const struct reset_simple_devdata reset_simple_socfpga = {
+	.reg_offset = 0x10,
+	.nr_resets = SOCFPGA_NR_BANKS * 32,
+	.status_active_low = true,
+};
+
+static const struct reset_simple_devdata reset_simple_active_low = {
+	.active_low = true,
+	.status_active_low = true,
+};
+
+static const struct of_device_id reset_simple_dt_ids[] = {
+	{ .compatible = "altr,rst-mgr", .data = &reset_simple_socfpga },
+	{ .compatible = "st,stm32-rcc", },
+	{ .compatible = "allwinner,sun6i-a31-clock-reset",
+		.data = &reset_simple_active_low },
+	{ .compatible = "zte,zx296718-reset",
+		.data = &reset_simple_active_low },
+	{ /* sentinel */ },
+};
+
+static int reset_simple_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct reset_simple_devdata *devdata;
+	struct reset_simple_data *data;
+	void __iomem *membase;
+	struct resource *res;
+	u32 reg_offset = 0;
+
+	devdata = of_device_get_match_data(dev);
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	membase = devm_ioremap_resource(dev, res);
+	if (IS_ERR(membase))
+		return PTR_ERR(membase);
+
+	spin_lock_init(&data->lock);
+	data->membase = membase;
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = resource_size(res) * BITS_PER_BYTE;
+	data->rcdev.ops = &reset_simple_ops;
+	data->rcdev.of_node = dev->of_node;
+
+	if (devdata) {
+		reg_offset = devdata->reg_offset;
+		if (devdata->nr_resets)
+			data->rcdev.nr_resets = devdata->nr_resets;
+		data->active_low = devdata->active_low;
+		data->status_active_low = devdata->status_active_low;
+	}
+
+	if (of_device_is_compatible(dev->of_node, "altr,rst-mgr") &&
+	    of_property_read_u32(dev->of_node, "altr,modrst-offset",
+				 &reg_offset)) {
+		dev_warn(dev,
+			 "missing altr,modrst-offset property, assuming 0x%x!\n",
+			 reg_offset);
+	}
+
+	data->membase += reg_offset;
+
+	return devm_reset_controller_register(dev, &data->rcdev);
+}
+
+static struct platform_driver reset_simple_driver = {
+	.probe	= reset_simple_probe,
+	.driver = {
+		.name		= "simple-reset",
+		.of_match_table	= reset_simple_dt_ids,
+	},
+};
+builtin_platform_driver(reset_simple_driver);

drivers/reset/reset-simple.h

+/*
+ * Simple Reset Controller ops
+ *
+ * Based on Allwinner SoCs Reset Controller driver
+ *
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __RESET_SIMPLE_H__
+#define __RESET_SIMPLE_H__
+
+#include <linux/io.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+
+/**
+ * struct reset_simple_data - driver data for simple reset controllers
+ * @lock: spinlock to protect registers during read-modify-write cycles
+ * @membase: memory mapped I/O register range
+ * @rcdev: reset controller device base structure
+ * @active_low: if true, bits are cleared to assert the reset. Otherwise, bits
+ *              are set to assert the reset. Note that this says nothing about
+ *              the voltage level of the actual reset line.
+ * @status_active_low: if true, bits read back as cleared while the reset is
+ *                     asserted. Otherwise, bits read back as set while the
+ *                     reset is asserted.
+ */
+struct reset_simple_data {
+	spinlock_t			lock;
+	void __iomem			*membase;
+	struct reset_controller_dev	rcdev;
+	bool				active_low;
+	bool				status_active_low;
+};
+
+extern const struct reset_control_ops reset_simple_ops;
+
+#endif /* __RESET_SIMPLE_H__ */

drivers/reset/reset-socfpga.c

-/*
- * Socfpga Reset Controller Driver
- *
- * Copyright 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
- *
- * based on
- * Allwinner SoCs Reset Controller driver
- *
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/reset-controller.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#define BANK_INCREMENT		4
-#define NR_BANKS		8
-
-struct socfpga_reset_data {
-	spinlock_t			lock;
-	void __iomem			*membase;
-	struct reset_controller_dev	rcdev;
-};
-
-static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	struct socfpga_reset_data *data = container_of(rcdev,
-						     struct socfpga_reset_data,
-						     rcdev);
-	int bank = id / BITS_PER_LONG;
-	int offset = id % BITS_PER_LONG;
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	reg = readl(data->membase + (bank * BANK_INCREMENT));
-	writel(reg | BIT(offset), data->membase + (bank * BANK_INCREMENT));
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	return 0;
-}
-
-static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
-				  unsigned long id)
-{
-	struct socfpga_reset_data *data = container_of(rcdev,
-						     struct socfpga_reset_data,
-						     rcdev);
-
-	int bank = id / BITS_PER_LONG;
-	int offset = id % BITS_PER_LONG;
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	reg = readl(data->membase + (bank * BANK_INCREMENT));
-	writel(reg & ~BIT(offset), data->membase + (bank * BANK_INCREMENT));
-
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	return 0;
-}
-
-static int socfpga_reset_status(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	struct socfpga_reset_data *data = container_of(rcdev,
-						struct socfpga_reset_data, rcdev);
-	int bank = id / BITS_PER_LONG;
-	int offset = id % BITS_PER_LONG;
-	u32 reg;
-
-	reg = readl(data->membase + (bank * BANK_INCREMENT));
-
-	return !(reg & BIT(offset));
-}
-
-static const struct reset_control_ops socfpga_reset_ops = {
-	.assert		= socfpga_reset_assert,
-	.deassert	= socfpga_reset_deassert,
-	.status		= socfpga_reset_status,
-};
-
-static int socfpga_reset_probe(struct platform_device *pdev)
-{
-	struct socfpga_reset_data *data;
-	struct resource *res;
-	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
-	u32 modrst_offset;
-
-	/*
-	 * The binding was mainlined without the required property.
-	 * Do not continue, when we encounter an old DT.
-	 */
-	if (!of_find_property(pdev->dev.of_node, "#reset-cells", NULL)) {
-		dev_err(&pdev->dev, "%pOF missing #reset-cells property\n",
-			pdev->dev.of_node);
-		return -EINVAL;
-	}
-
-	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data->membase = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(data->membase))
-		return PTR_ERR(data->membase);
-
-	if (of_property_read_u32(np, "altr,modrst-offset", &modrst_offset)) {
-		dev_warn(dev, "missing altr,modrst-offset property, assuming 0x10!\n");
-		modrst_offset = 0x10;
-	}
-	data->membase += modrst_offset;
-
-	spin_lock_init(&data->lock);
-
-	data->rcdev.owner = THIS_MODULE;
-	data->rcdev.nr_resets = NR_BANKS * BITS_PER_LONG;
-	data->rcdev.ops = &socfpga_reset_ops;
-	data->rcdev.of_node = pdev->dev.of_node;
-
-	return devm_reset_controller_register(dev, &data->rcdev);
-}
-
-static const struct of_device_id socfpga_reset_dt_ids[] = {
-	{ .compatible = "altr,rst-mgr", },
-	{ /* sentinel */ },
-};
-
-static struct platform_driver socfpga_reset_driver = {
-	.probe	= socfpga_reset_probe,
-	.driver = {
-		.name		= "socfpga-reset",
-		.of_match_table	= socfpga_reset_dt_ids,
-	},
-};
-builtin_platform_driver(socfpga_reset_driver);

drivers/reset/reset-stm32.c

-/*
- * Copyright (C) Maxime Coquelin 2015
- * Author:  Maxime Coquelin <mcoquelin.stm32@gmail.com>
- * License terms:  GNU General Public License (GPL), version 2
- *
- * Heavily based on sunxi driver from Maxime Ripard.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-#include <linux/reset-controller.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-struct stm32_reset_data {
-	spinlock_t			lock;
-	void __iomem			*membase;
-	struct reset_controller_dev	rcdev;
-};
-
-static int stm32_reset_assert(struct reset_controller_dev *rcdev,
-			      unsigned long id)
-{
-	struct stm32_reset_data *data = container_of(rcdev,
-						     struct stm32_reset_data,
-						     rcdev);
-	int bank = id / BITS_PER_LONG;
-	int offset = id % BITS_PER_LONG;
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	reg = readl(data->membase + (bank * 4));
-	writel(reg | BIT(offset), data->membase + (bank * 4));
-
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	return 0;
-}
-
-static int stm32_reset_deassert(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	struct stm32_reset_data *data = container_of(rcdev,
-						     struct stm32_reset_data,
-						     rcdev);
-	int bank = id / BITS_PER_LONG;
-	int offset = id % BITS_PER_LONG;
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	reg = readl(data->membase + (bank * 4));
-	writel(reg & ~BIT(offset), data->membase + (bank * 4));
-
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	return 0;
-}
-
-static const struct reset_control_ops stm32_reset_ops = {
-	.assert		= stm32_reset_assert,
-	.deassert	= stm32_reset_deassert,
-};
-
-static const struct of_device_id stm32_reset_dt_ids[] = {
-	 { .compatible = "st,stm32-rcc", },
-	 { /* sentinel */ },
-};
-
-static int stm32_reset_probe(struct platform_device *pdev)
-{
-	struct stm32_reset_data *data;
-	struct resource *res;
-
-	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data->membase = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(data->membase))
-		return PTR_ERR(data->membase);
-
-	spin_lock_init(&data->lock);
-
-	data->rcdev.owner = THIS_MODULE;
-	data->rcdev.nr_resets = resource_size(res) * 8;
-	data->rcdev.ops = &stm32_reset_ops;
-	data->rcdev.of_node = pdev->dev.of_node;
-
-	return devm_reset_controller_register(&pdev->dev, &data->rcdev);
-}
-
-static struct platform_driver stm32_reset_driver = {
-	.probe	= stm32_reset_probe,
-	.driver = {
-		.name		= "stm32-rcc-reset",
-		.of_match_table	= stm32_reset_dt_ids,
-	},
-};
-builtin_platform_driver(stm32_reset_driver);

drivers/reset/reset-sunxi.c

@@ -22,64 +22,11 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
-struct sunxi_reset_data {
-	spinlock_t			lock;
-	void __iomem			*membase;
-	struct reset_controller_dev	rcdev;
-};
-
-static int sunxi_reset_assert(struct reset_controller_dev *rcdev,
-			      unsigned long id)
-{
-	struct sunxi_reset_data *data = container_of(rcdev,
-						     struct sunxi_reset_data,
-						     rcdev);
-	int reg_width = sizeof(u32);
-	int bank = id / (reg_width * BITS_PER_BYTE);
-	int offset = id % (reg_width * BITS_PER_BYTE);
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	reg = readl(data->membase + (bank * reg_width));
-	writel(reg & ~BIT(offset), data->membase + (bank * reg_width));
-
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	return 0;
-}
-
-static int sunxi_reset_deassert(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	struct sunxi_reset_data *data = container_of(rcdev,
-						     struct sunxi_reset_data,
-						     rcdev);
-	int reg_width = sizeof(u32);
-	int bank = id / (reg_width * BITS_PER_BYTE);
-	int offset = id % (reg_width * BITS_PER_BYTE);
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	reg = readl(data->membase + (bank * reg_width));
-	writel(reg | BIT(offset), data->membase + (bank * reg_width));
-
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	return 0;
-}
-
-static const struct reset_control_ops sunxi_reset_ops = {
-	.assert		= sunxi_reset_assert,
-	.deassert	= sunxi_reset_deassert,
-};
+#include "reset-simple.h"
 
 static int sunxi_reset_init(struct device_node *np)
 {
-	struct sunxi_reset_data *data;
+	struct reset_simple_data *data;
 	struct resource res;
 	resource_size_t size;
 	int ret;
@@ -108,8 +55,9 @@ static int sunxi_reset_init(struct device_node *np)
 
 	data->rcdev.owner = THIS_MODULE;
 	data->rcdev.nr_resets = size * 8;
-	data->rcdev.ops = &sunxi_reset_ops;
+	data->rcdev.ops = &reset_simple_ops;
 	data->rcdev.of_node = np;
+	data->active_low = true;
 
 	return reset_controller_register(&data->rcdev);
 
@@ -122,6 +70,8 @@ static int sunxi_reset_init(struct device_node *np)
  * These are the reset controller we need to initialize early on in
  * our system, before we can even think of using a regular device
  * driver for it.
+ * The controllers that we can register through the regular device
+ * model are handled by the simple reset driver directly.
  */
 static const struct of_device_id sunxi_early_reset_dt_ids[] __initconst = {
 	{ .compatible = "allwinner,sun6i-a31-ahb1-reset", },
@@ -135,45 +85,3 @@ void __init sun6i_reset_init(void)
 	for_each_matching_node(np, sunxi_early_reset_dt_ids)
 		sunxi_reset_init(np);
 }
-
-/*
- * And these are the controllers we can register through the regular
- * device model.
- */
-static const struct of_device_id sunxi_reset_dt_ids[] = {
-	 { .compatible = "allwinner,sun6i-a31-clock-reset", },
-	 { /* sentinel */ },
-};
-
-static int sunxi_reset_probe(struct platform_device *pdev)
-{
-	struct sunxi_reset_data *data;
-	struct resource *res;
-
-	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data->membase = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(data->membase))
-		return PTR_ERR(data->membase);
-
-	spin_lock_init(&data->lock);
-
-	data->rcdev.owner = THIS_MODULE;
-	data->rcdev.nr_resets = resource_size(res) * 8;
-	data->rcdev.ops = &sunxi_reset_ops;
-	data->rcdev.of_node = pdev->dev.of_node;
-
-	return devm_reset_controller_register(&pdev->dev, &data->rcdev);
-}
-
-static struct platform_driver sunxi_reset_driver = {
-	.probe	= sunxi_reset_probe,
-	.driver = {
-		.name		= "sunxi-reset",
-		.of_match_table	= sunxi_reset_dt_ids,
-	},
-};
-builtin_platform_driver(sunxi_reset_driver);

drivers/reset/reset-uniphier.c

@@ -58,6 +58,7 @@ static const struct uniphier_reset_data uniphier_ld4_sys_reset_data[] = {
 
 static const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
 	UNIPHIER_RESETX(2, 0x2000, 2),		/* NAND */
+	UNIPHIER_RESETX(6, 0x2000, 12),		/* Ether */
 	UNIPHIER_RESETX(8, 0x2000, 10),		/* STDMAC (HSC, MIO, RLE) */
 	UNIPHIER_RESETX(12, 0x2000, 6),		/* GIO (Ether, SATA, USB3) */
 	UNIPHIER_RESETX(14, 0x2000, 17),	/* USB30 */
@@ -76,6 +77,7 @@ static const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
 
 static const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
 	UNIPHIER_RESETX(2, 0x2000, 2),		/* NAND */
+	UNIPHIER_RESETX(6, 0x2000, 12),		/* Ether */
 	UNIPHIER_RESETX(8, 0x2000, 10),		/* STDMAC (HSC, RLE) */
 	UNIPHIER_RESETX(14, 0x2000, 17),	/* USB30 */
 	UNIPHIER_RESETX(15, 0x2004, 17),	/* USB31 */
@@ -92,6 +94,7 @@ static const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
 static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
 	UNIPHIER_RESETX(2, 0x200c, 0),		/* NAND */
 	UNIPHIER_RESETX(4, 0x200c, 2),		/* eMMC */
+	UNIPHIER_RESETX(6, 0x200c, 6),		/* Ether */
 	UNIPHIER_RESETX(8, 0x200c, 8),		/* STDMAC (HSC, MIO) */
 	UNIPHIER_RESETX(40, 0x2008, 0),		/* AIO */
 	UNIPHIER_RESETX(41, 0x2008, 1),		/* EVEA */
@@ -102,6 +105,7 @@ static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
 static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
 	UNIPHIER_RESETX(2, 0x200c, 0),		/* NAND */
 	UNIPHIER_RESETX(4, 0x200c, 2),		/* eMMC */
+	UNIPHIER_RESETX(6, 0x200c, 6),		/* Ether */
 	UNIPHIER_RESETX(8, 0x200c, 8),		/* STDMAC (HSC) */
 	UNIPHIER_RESETX(12, 0x200c, 5),		/* GIO (PCIe, USB3) */
 	UNIPHIER_RESETX(16, 0x200c, 12),	/* USB30-PHY0 */
@@ -114,6 +118,20 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
 	UNIPHIER_RESET_END,
 };
 
+static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = {
+	UNIPHIER_RESETX(2, 0x200c, 0),		/* NAND */
+	UNIPHIER_RESETX(4, 0x200c, 2),		/* eMMC */
+	UNIPHIER_RESETX(8, 0x200c, 12),		/* STDMAC */
+	UNIPHIER_RESETX(12, 0x200c, 4),		/* USB30 link (GIO0) */
+	UNIPHIER_RESETX(13, 0x200c, 5),		/* USB31 link (GIO1) */
+	UNIPHIER_RESETX(16, 0x200c, 16),	/* USB30-PHY0 */
+	UNIPHIER_RESETX(17, 0x200c, 18),	/* USB30-PHY1 */
+	UNIPHIER_RESETX(18, 0x200c, 20),	/* USB30-PHY2 */
+	UNIPHIER_RESETX(20, 0x200c, 17),	/* USB31-PHY0 */
+	UNIPHIER_RESETX(21, 0x200c, 19),	/* USB31-PHY1 */
+	UNIPHIER_RESET_END,
+};
+
 /* Media I/O reset data */
 #define UNIPHIER_MIO_RESET_SD(id, ch)			\
 	UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 0)
@@ -359,6 +377,10 @@ static const struct of_device_id uniphier_reset_match[] = {
 		.compatible = "socionext,uniphier-ld20-reset",
 		.data = uniphier_ld20_sys_reset_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pxs3-reset",
+		.data = uniphier_pxs3_sys_reset_data,
+	},
 	/* Media I/O reset, SD reset */
 	{
 		.compatible = "socionext,uniphier-ld4-mio-reset",
@@ -392,6 +414,10 @@ static const struct of_device_id uniphier_reset_match[] = {
 		.compatible = "socionext,uniphier-ld20-sd-reset",
 		.data = uniphier_pro5_sd_reset_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pxs3-sd-reset",
+		.data = uniphier_pro5_sd_reset_data,
+	},
 	/* Peripheral reset */
 	{
 		.compatible = "socionext,uniphier-ld4-peri-reset",
@@ -421,6 +447,10 @@ static const struct of_device_id uniphier_reset_match[] = {
 		.compatible = "socionext,uniphier-ld20-peri-reset",
 		.data = uniphier_pro4_peri_reset_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pxs3-peri-reset",
+		.data = uniphier_pro4_peri_reset_data,
+	},
 	/* Analog signal amplifiers reset */
 	{
 		.compatible = "socionext,uniphier-ld11-adamv-reset",

drivers/reset/reset-zx2967.c

-/*
- * ZTE's zx2967 family reset controller driver
- *
- * Copyright (C) 2017 ZTE Ltd.
- *
- * Author: Baoyou Xie <baoyou.xie@linaro.org>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-#include <linux/reset-controller.h>
-
-struct zx2967_reset {
-	void __iomem			*reg_base;
-	spinlock_t			lock;
-	struct reset_controller_dev	rcdev;
-};
-
-static int zx2967_reset_act(struct reset_controller_dev *rcdev,
-			    unsigned long id, bool assert)
-{
-	struct zx2967_reset *reset = NULL;
-	int bank = id / 32;
-	int offset = id % 32;
-	u32 reg;
-	unsigned long flags;
-
-	reset = container_of(rcdev, struct zx2967_reset, rcdev);
-
-	spin_lock_irqsave(&reset->lock, flags);
-
-	reg = readl_relaxed(reset->reg_base + (bank * 4));
-	if (assert)
-		reg &= ~BIT(offset);
-	else
-		reg |= BIT(offset);
-	writel_relaxed(reg, reset->reg_base + (bank * 4));
-
-	spin_unlock_irqrestore(&reset->lock, flags);
-
-	return 0;
-}
-
-static int zx2967_reset_assert(struct reset_controller_dev *rcdev,
-			       unsigned long id)
-{
-	return zx2967_reset_act(rcdev, id, true);
-}
-
-static int zx2967_reset_deassert(struct reset_controller_dev *rcdev,
-				 unsigned long id)
-{
-	return zx2967_reset_act(rcdev, id, false);
-}
-
-static const struct reset_control_ops zx2967_reset_ops = {
-	.assert		= zx2967_reset_assert,
-	.deassert	= zx2967_reset_deassert,
-};
-
-static int zx2967_reset_probe(struct platform_device *pdev)
-{
-	struct zx2967_reset *reset;
-	struct resource *res;
-
-	reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
-	if (!reset)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reset->reg_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(reset->reg_base))
-		return PTR_ERR(reset->reg_base);
-
-	spin_lock_init(&reset->lock);
-
-	reset->rcdev.owner = THIS_MODULE;
-	reset->rcdev.nr_resets = resource_size(res) * 8;
-	reset->rcdev.ops = &zx2967_reset_ops;
-	reset->rcdev.of_node = pdev->dev.of_node;
-
-	return devm_reset_controller_register(&pdev->dev, &reset->rcdev);
-}
-
-static const struct of_device_id zx2967_reset_dt_ids[] = {
-	 { .compatible = "zte,zx296718-reset", },
-	 {},
-};
-
-static struct platform_driver zx2967_reset_driver = {
-	.probe	= zx2967_reset_probe,
-	.driver = {
-		.name		= "zx2967-reset",
-		.of_match_table	= zx2967_reset_dt_ids,
-	},
-};
-builtin_platform_driver(zx2967_reset_driver);

include/dt-bindings/reset/mt7622-reset.h

+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7622
+#define _DT_BINDINGS_RESET_CONTROLLER_MT7622
+
+/* INFRACFG resets */
+#define MT7622_INFRA_EMI_REG_RST		0
+#define MT7622_INFRA_DRAMC0_A0_RST		1
+#define MT7622_INFRA_APCIRQ_EINT_RST		3
+#define MT7622_INFRA_APXGPT_RST			4
+#define MT7622_INFRA_SCPSYS_RST			5
+#define MT7622_INFRA_PMIC_WRAP_RST		7
+#define MT7622_INFRA_IRRX_RST			9
+#define MT7622_INFRA_EMI_RST			16
+#define MT7622_INFRA_WED0_RST			17
+#define MT7622_INFRA_DRAMC_RST			18
+#define MT7622_INFRA_CCI_INTF_RST		19
+#define MT7622_INFRA_TRNG_RST			21
+#define MT7622_INFRA_SYSIRQ_RST			22
+#define MT7622_INFRA_WED1_RST			25
+
+/* PERICFG Subsystem resets */
+#define MT7622_PERI_UART0_SW_RST		0
+#define MT7622_PERI_UART1_SW_RST		1
+#define MT7622_PERI_UART2_SW_RST		2
+#define MT7622_PERI_UART3_SW_RST		3
+#define MT7622_PERI_UART4_SW_RST		4
+#define MT7622_PERI_BTIF_SW_RST			6
+#define MT7622_PERI_PWM_SW_RST			8
+#define MT7622_PERI_AUXADC_SW_RST		10
+#define MT7622_PERI_DMA_SW_RST			11
+#define MT7622_PERI_IRTX_SW_RST			13
+#define MT7622_PERI_NFI_SW_RST			14
+#define MT7622_PERI_THERM_SW_RST		16
+#define MT7622_PERI_MSDC0_SW_RST		19
+#define MT7622_PERI_MSDC1_SW_RST		20
+#define MT7622_PERI_I2C0_SW_RST			22
+#define MT7622_PERI_I2C1_SW_RST			23
+#define MT7622_PERI_I2C2_SW_RST			24
+#define MT7622_PERI_SPI0_SW_RST			33
+#define MT7622_PERI_SPI1_SW_RST			34
+#define MT7622_PERI_FLASHIF_SW_RST		36
+
+/* TOPRGU resets */
+#define MT7622_TOPRGU_INFRA_RST			0
+#define MT7622_TOPRGU_ETHDMA_RST		1
+#define MT7622_TOPRGU_DDRPHY_RST		6
+#define MT7622_TOPRGU_INFRA_AO_RST		8
+#define MT7622_TOPRGU_CONN_RST			9
+#define MT7622_TOPRGU_APMIXED_RST		10
+#define MT7622_TOPRGU_CONN_MCU_RST		12
+
+/* PCIe/SATA Subsystem resets */
+#define MT7622_SATA_PHY_REG_RST			12
+#define MT7622_SATA_PHY_SW_RST			13
+#define MT7622_SATA_AXI_BUS_RST			15
+#define MT7622_PCIE1_CORE_RST			19
+#define MT7622_PCIE1_MMIO_RST			20
+#define MT7622_PCIE1_HRST			21
+#define MT7622_PCIE1_USER_RST			22
+#define MT7622_PCIE1_PIPE_RST			23
+#define MT7622_PCIE0_CORE_RST			27
+#define MT7622_PCIE0_MMIO_RST			28
+#define MT7622_PCIE0_HRST			29
+#define MT7622_PCIE0_USER_RST			30
+#define MT7622_PCIE0_PIPE_RST			31
+
+/* SSUSB Subsystem resets */
+#define MT7622_SSUSB_PHY_PWR_RST		3
+#define MT7622_SSUSB_MAC_PWR_RST		4
+
+/* ETHSYS Subsystem resets */
+#define MT7622_ETHSYS_SYS_RST			0
+#define MT7622_ETHSYS_MCM_RST			2
+#define MT7622_ETHSYS_HSDMA_RST			5
+#define MT7622_ETHSYS_FE_RST			6
+#define MT7622_ETHSYS_GMAC_RST			23
+#define MT7622_ETHSYS_EPHY_RST			24
+#define MT7622_ETHSYS_CRYPTO_RST		29
+#define MT7622_ETHSYS_PPE_RST			31
+
+#endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT7622 */