Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86/apic updates from Thomas Gleixner:
 "This is a major overhaul to the x86 apic subsystem consisting of the
  following parts:

   - Remove obsolete APIC driver abstractions (David Rientjes)

   - Use the irqdomain facilities to dynamically allocate IRQs for
     IOAPICs.  This is a prerequisite to enable IOAPIC hotplug support,
     and it also frees up wasted vectors (Jiang Liu)

   - Misc fixlets.

  Despite the hickup in Ingos previous pull request - caused by the
  missing fixup for the suspend/resume issue reported by Borislav - I
  strongly recommend that this update finds its way into 3.17.  Some
  history for you:

  This is preparatory work for physical IOAPIC hotplug.  The first
  attempt to support this was done by Yinghai and I shot it down because
  it just added another layer of obscurity and complexity to the already
  existing mess without tackling the underlying shortcomings of the
  current implementation.

  After quite some on- and offlist discussions, I requested that the
  design of this functionality must use generic infrastructure, i.e.
  irq domains, which provide all the mechanisms to dynamically map linux
  interrupt numbers to physical interrupts.

  Jiang picked up the idea and did a great job of consolidating the
  existing interfaces to manage the x86 (IOAPIC) interrupt system by
  utilizing irq domains.

  The testing in tip, Linux-next and inside of Intel on various machines
  did not unearth any oddities until Borislav exposed it to one of his
  oddball machines.  The issue was resolved quickly, but unfortunately
  the fix fell through the cracks and did not hit the tip tree before
  Ingo sent the pull request.  Not entirely Ingos fault, I also assumed
  that the fix was already merged when Ingo asked me whether he could
  send it.

  Nevertheless this work has a proper design, has undergone several
  rounds of review and the final fallout after applying it to tip and
  integrating it into Linux-next has been more than moderate.  It's the
  ground work not only for IOAPIC hotplug, it will also allow us to move
  the lowlevel vector allocation into the irqdomain hierarchy, which
  will benefit other architectures as well.  Patches are posted already,
  but they are on hold for two weeks, see below.

  I really appreciate the competence and responsiveness Jiang has shown
  in course of this endavour.  So I'm sure that any fallout of this will
  be addressed in a timely manner.

  FYI, I'm vanishing for 2 weeks into my annual kids summer camp kitchen
  duty^Wvacation, while you folks are drooling at KS/LinuxCon :) But HPA
  will have a look at the hopefully zero fallout until I'm back"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation
  x86/apic/vsmp: Make is_vsmp_box() static
  x86, apic: Remove enable_apic_mode callback
  x86, apic: Remove setup_portio_remap callback
  x86, apic: Remove multi_timer_check callback
  x86, apic: Replace noop_check_apicid_used
  x86, apic: Remove check_apicid_present callback
  x86, apic: Remove mps_oem_check callback
  x86, apic: Remove smp_callin_clear_local_apic callback
  x86, apic: Replace trampoline physical addresses with defaults
  x86, apic: Remove x86_32_numa_cpu_node callback
  x86: intel-mid: Use the new io_apic interfaces
  x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box()
  x86, irq: Clean up irqdomain transition code
  x86, irq, devicetree: Release IOAPIC pin when PCI device is disabled
  x86, irq, SFI: Release IOAPIC pin when PCI device is disabled
  x86, irq, mpparse: Release IOAPIC pin when PCI device is disabled
  x86, irq, ACPI: Release IOAPIC pin when PCI device is disabled
  x86, irq: Introduce helper functions to release IOAPIC pin
  x86, irq: Simplify the way to handle ISA IRQ
  ...

arch/x86/Kconfig

@@ -434,6 +434,7 @@ config X86_INTEL_CE
 	bool "CE4100 TV platform"
 	depends on PCI
 	depends on PCI_GODIRECT
+	depends on X86_IO_APIC
 	depends on X86_32
 	depends on X86_EXTENDED_PLATFORM
 	select X86_REBOOTFIXUPS
@@ -840,6 +841,7 @@ config X86_IO_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI
 	select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ
+	select IRQ_DOMAIN
 
 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	bool "Reroute for broken boot IRQs"

arch/x86/include/asm/apic.h

@@ -85,14 +85,6 @@ static inline bool apic_from_smp_config(void)
 #include <asm/paravirt.h>
 #endif
 
-#ifdef CONFIG_X86_64
-extern int is_vsmp_box(void);
-#else
-static inline int is_vsmp_box(void)
-{
-	return 0;
-}
-#endif
 extern int setup_profiling_timer(unsigned int);
 
 static inline void native_apic_mem_write(u32 reg, u32 v)
@@ -300,7 +292,6 @@ struct apic {
 
 	int dest_logical;
 	unsigned long (*check_apicid_used)(physid_mask_t *map, int apicid);
-	unsigned long (*check_apicid_present)(int apicid);
 
 	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask,
 					 const struct cpumask *mask);
@@ -309,21 +300,11 @@ struct apic {
 	void (*ioapic_phys_id_map)(physid_mask_t *phys_map, physid_mask_t *retmap);
 
 	void (*setup_apic_routing)(void);
-	int (*multi_timer_check)(int apic, int irq);
 	int (*cpu_present_to_apicid)(int mps_cpu);
 	void (*apicid_to_cpu_present)(int phys_apicid, physid_mask_t *retmap);
-	void (*setup_portio_remap)(void);
 	int (*check_phys_apicid_present)(int phys_apicid);
-	void (*enable_apic_mode)(void);
 	int (*phys_pkg_id)(int cpuid_apic, int index_msb);
 
-	/*
-	 * When one of the next two hooks returns 1 the apic
-	 * is switched to this. Essentially they are additional
-	 * probe functions:
-	 */
-	int (*mps_oem_check)(struct mpc_table *mpc, char *oem, char *productid);
-
 	unsigned int (*get_apic_id)(unsigned long x);
 	unsigned long (*set_apic_id)(unsigned int id);
 	unsigned long apic_id_mask;
@@ -343,11 +324,7 @@ struct apic {
 	/* wakeup_secondary_cpu */
 	int (*wakeup_secondary_cpu)(int apicid, unsigned long start_eip);
 
-	int trampoline_phys_low;
-	int trampoline_phys_high;
-
 	bool wait_for_init_deassert;
-	void (*smp_callin_clear_local_apic)(void);
 	void (*inquire_remote_apic)(int apicid);
 
 	/* apic ops */
@@ -378,14 +355,6 @@ struct apic {
 	 * won't be applied properly during early boot in this case.
 	 */
 	int (*x86_32_early_logical_apicid)(int cpu);
-
-	/*
-	 * Optional method called from setup_local_APIC() after logical
-	 * apicid is guaranteed to be known to initialize apicid -> node
-	 * mapping if NUMA initialization hasn't done so already.  Don't
-	 * add new users.
-	 */
-	int (*x86_32_numa_cpu_node)(int cpu);
 #endif
 };
 
@@ -496,14 +465,12 @@ static inline unsigned default_get_apic_id(unsigned long x)
 }
 
 /*
- * Warm reset vector default position:
+ * Warm reset vector position:
  */
-#define DEFAULT_TRAMPOLINE_PHYS_LOW		0x467
-#define DEFAULT_TRAMPOLINE_PHYS_HIGH		0x469
+#define TRAMPOLINE_PHYS_LOW		0x467
+#define TRAMPOLINE_PHYS_HIGH		0x469
 
 #ifdef CONFIG_X86_64
-extern int default_acpi_madt_oem_check(char *, char *);
-
 extern void apic_send_IPI_self(int vector);
 
 DECLARE_PER_CPU(int, x2apic_extra_bits);
@@ -552,6 +519,8 @@ static inline int default_apic_id_valid(int apicid)
 	return (apicid < 255);
 }
 
+extern int default_acpi_madt_oem_check(char *, char *);
+
 extern void default_setup_apic_routing(void);
 
 extern struct apic apic_noop;
@@ -635,11 +604,6 @@ static inline unsigned long default_check_apicid_used(physid_mask_t *map, int ap
 	return physid_isset(apicid, *map);
 }
 
-static inline unsigned long default_check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
 static inline void default_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
 {
 	*retmap = *phys_map;

arch/x86/include/asm/hardirq.h

@@ -40,9 +40,6 @@ typedef struct {
 
 DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 
-/* We can have at most NR_VECTORS irqs routed to a cpu at a time */
-#define MAX_HARDIRQS_PER_CPU NR_VECTORS
-
 #define __ARCH_IRQ_STAT
 
 #define inc_irq_stat(member)	this_cpu_inc(irq_stat.member)

arch/x86/include/asm/i8259.h

@@ -67,4 +67,9 @@ struct legacy_pic {
 extern struct legacy_pic *legacy_pic;
 extern struct legacy_pic null_legacy_pic;
 
+static inline int nr_legacy_irqs(void)
+{
+	return legacy_pic->nr_legacy_irqs;
+}
+
 #endif /* _ASM_X86_I8259_H */

arch/x86/include/asm/io_apic.h

@@ -98,6 +98,8 @@ struct IR_IO_APIC_route_entry {
 #define IOAPIC_AUTO     -1
 #define IOAPIC_EDGE     0
 #define IOAPIC_LEVEL    1
+#define	IOAPIC_MAP_ALLOC		0x1
+#define	IOAPIC_MAP_CHECK		0x2
 
 #ifdef CONFIG_X86_IO_APIC
 
@@ -118,9 +120,6 @@ extern int mp_irq_entries;
 /* MP IRQ source entries */
 extern struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
 
-/* non-0 if default (table-less) MP configuration */
-extern int mpc_default_type;
-
 /* Older SiS APIC requires we rewrite the index register */
 extern int sis_apic_bug;
 
@@ -133,9 +132,6 @@ extern int noioapicquirk;
 /* -1 if "noapic" boot option passed */
 extern int noioapicreroute;
 
-/* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */
-extern int timer_through_8259;
-
 /*
  * If we use the IO-APIC for IRQ routing, disable automatic
  * assignment of PCI IRQ's.
@@ -145,14 +141,8 @@ extern int timer_through_8259;
 
 struct io_apic_irq_attr;
 struct irq_cfg;
-extern int io_apic_set_pci_routing(struct device *dev, int irq,
-		 struct io_apic_irq_attr *irq_attr);
-void setup_IO_APIC_irq_extra(u32 gsi);
 extern void ioapic_insert_resources(void);
 
-extern int native_setup_ioapic_entry(int, struct IO_APIC_route_entry *,
-				     unsigned int, int,
-				     struct io_apic_irq_attr *);
 extern int native_setup_ioapic_entry(int, struct IO_APIC_route_entry *,
 				     unsigned int, int,
 				     struct io_apic_irq_attr *);
@@ -162,7 +152,6 @@ extern void native_compose_msi_msg(struct pci_dev *pdev,
 				   unsigned int irq, unsigned int dest,
 				   struct msi_msg *msg, u8 hpet_id);
 extern void native_eoi_ioapic_pin(int apic, int pin, int vector);
-int io_apic_setup_irq_pin_once(unsigned int irq, int node, struct io_apic_irq_attr *attr);
 
 extern int save_ioapic_entries(void);
 extern void mask_ioapic_entries(void);
@@ -171,15 +160,40 @@ extern int restore_ioapic_entries(void);
 extern void setup_ioapic_ids_from_mpc(void);
 extern void setup_ioapic_ids_from_mpc_nocheck(void);
 
+enum ioapic_domain_type {
+	IOAPIC_DOMAIN_INVALID,
+	IOAPIC_DOMAIN_LEGACY,
+	IOAPIC_DOMAIN_STRICT,
+	IOAPIC_DOMAIN_DYNAMIC,
+};
+
+struct device_node;
+struct irq_domain;
+struct irq_domain_ops;
+
+struct ioapic_domain_cfg {
+	enum ioapic_domain_type		type;
+	const struct irq_domain_ops	*ops;
+	struct device_node		*dev;
+};
+
 struct mp_ioapic_gsi{
 	u32 gsi_base;
 	u32 gsi_end;
 };
-extern struct mp_ioapic_gsi  mp_gsi_routing[];
 extern u32 gsi_top;
-int mp_find_ioapic(u32 gsi);
-int mp_find_ioapic_pin(int ioapic, u32 gsi);
-void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
+
+extern int mp_find_ioapic(u32 gsi);
+extern int mp_find_ioapic_pin(int ioapic, u32 gsi);
+extern u32 mp_pin_to_gsi(int ioapic, int pin);
+extern int mp_map_gsi_to_irq(u32 gsi, unsigned int flags);
+extern void mp_unmap_irq(int irq);
+extern void __init mp_register_ioapic(int id, u32 address, u32 gsi_base,
+				      struct ioapic_domain_cfg *cfg);
+extern int mp_irqdomain_map(struct irq_domain *domain, unsigned int virq,
+			    irq_hw_number_t hwirq);
+extern void mp_irqdomain_unmap(struct irq_domain *domain, unsigned int virq);
+extern int mp_set_gsi_attr(u32 gsi, int trigger, int polarity, int node);
 extern void __init pre_init_apic_IRQ0(void);
 
 extern void mp_save_irq(struct mpc_intsrc *m);
@@ -217,14 +231,12 @@ extern void io_apic_eoi(unsigned int apic, unsigned int vector);
 
 #define io_apic_assign_pci_irqs 0
 #define setup_ioapic_ids_from_mpc x86_init_noop
-static const int timer_through_8259 = 0;
 static inline void ioapic_insert_resources(void) { }
 #define gsi_top (NR_IRQS_LEGACY)
 static inline int mp_find_ioapic(u32 gsi) { return 0; }
-
-struct io_apic_irq_attr;
-static inline int io_apic_set_pci_routing(struct device *dev, int irq,
-		 struct io_apic_irq_attr *irq_attr) { return 0; }
+static inline u32 mp_pin_to_gsi(int ioapic, int pin) { return UINT_MAX; }
+static inline int mp_map_gsi_to_irq(u32 gsi, unsigned int flags) { return gsi; }
+static inline void mp_unmap_irq(int irq) { }
 
 static inline int save_ioapic_entries(void)
 {

arch/x86/include/asm/mpspec.h

@@ -40,8 +40,6 @@ extern int mp_bus_id_to_type[MAX_MP_BUSSES];
 extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
 
 extern unsigned int boot_cpu_physical_apicid;
-extern unsigned int max_physical_apicid;
-extern int mpc_default_type;
 extern unsigned long mp_lapic_addr;
 
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -88,15 +86,6 @@ static inline void early_reserve_e820_mpc_new(void) { }
 #endif
 
 int generic_processor_info(int apicid, int version);
-#ifdef CONFIG_ACPI
-extern void mp_register_ioapic(int id, u32 address, u32 gsi_base);
-extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
-				   u32 gsi);
-extern void mp_config_acpi_legacy_irqs(void);
-struct device;
-extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level,
-				 int active_high_low);
-#endif /* CONFIG_ACPI */
 
 #define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_LOCAL_APIC)
 
@@ -161,8 +150,4 @@ static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map)
 
 extern physid_mask_t phys_cpu_present_map;
 
-extern int generic_mps_oem_check(struct mpc_table *, char *, char *);
-
-extern int default_acpi_madt_oem_check(char *, char *);
-
 #endif /* _ASM_X86_MPSPEC_H */

arch/x86/include/asm/prom.h

@@ -26,12 +26,10 @@
 extern int of_ioapic;
 extern u64 initial_dtb;
 extern void add_dtb(u64 data);
-extern void x86_add_irq_domains(void);
 void x86_of_pci_init(void);
 void x86_dtb_init(void);
 #else
 static inline void add_dtb(u64 data) { }
-static inline void x86_add_irq_domains(void) { }
 static inline void x86_of_pci_init(void) { }
 static inline void x86_dtb_init(void) { }
 #define of_ioapic 0

arch/x86/include/asm/smpboot_hooks.h

@@ -17,10 +17,10 @@ static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
 	spin_unlock_irqrestore(&rtc_lock, flags);
 	local_flush_tlb();
 	pr_debug("1.\n");
-	*((volatile unsigned short *)phys_to_virt(apic->trampoline_phys_high)) =
+	*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH)) =
 							start_eip >> 4;
 	pr_debug("2.\n");
-	*((volatile unsigned short *)phys_to_virt(apic->trampoline_phys_low)) =
+	*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) =
 							start_eip & 0xf;
 	pr_debug("3.\n");
 }
@@ -42,7 +42,7 @@ static inline void smpboot_restore_warm_reset_vector(void)
 	CMOS_WRITE(0, 0xf);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	*((volatile u32 *)phys_to_virt(apic->trampoline_phys_low)) = 0;
+	*((volatile u32 *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0;
 }
 
 static inline void __init smpboot_setup_io_apic(void)

arch/x86/kernel/apic/apic.c

@@ -67,7 +67,7 @@ EXPORT_SYMBOL_GPL(boot_cpu_physical_apicid);
 /*
  * The highest APIC ID seen during enumeration.
  */
-unsigned int max_physical_apicid;
+static unsigned int max_physical_apicid;
 
 /*
  * Bitmask of physically existing CPUs:
@@ -1342,17 +1342,6 @@ void setup_local_APIC(void)
 	/* always use the value from LDR */
 	early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
 		logical_smp_processor_id();
-
-	/*
-	 * Some NUMA implementations (NUMAQ) don't initialize apicid to
-	 * node mapping during NUMA init.  Now that logical apicid is
-	 * guaranteed to be known, give it another chance.  This is already
-	 * a bit too late - percpu allocation has already happened without
-	 * proper NUMA affinity.
-	 */
-	if (apic->x86_32_numa_cpu_node)
-		set_apicid_to_node(early_per_cpu(x86_cpu_to_apicid, cpu),
-				   apic->x86_32_numa_cpu_node(cpu));
 #endif
 
 	/*
@@ -2053,8 +2042,6 @@ void __init connect_bsp_APIC(void)
 		imcr_pic_to_apic();
 	}
 #endif
-	if (apic->enable_apic_mode)
-		apic->enable_apic_mode();
 }
 
 /**
@@ -2451,51 +2438,6 @@ static void apic_pm_activate(void) { }
 
 #ifdef CONFIG_X86_64
 
-static int apic_cluster_num(void)
-{
-	int i, clusters, zeros;
-	unsigned id;
-	u16 *bios_cpu_apicid;
-	DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
-
-	bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
-	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
-
-	for (i = 0; i < nr_cpu_ids; i++) {
-		/* are we being called early in kernel startup? */
-		if (bios_cpu_apicid) {
-			id = bios_cpu_apicid[i];
-		} else if (i < nr_cpu_ids) {
-			if (cpu_present(i))
-				id = per_cpu(x86_bios_cpu_apicid, i);
-			else
-				continue;
-		} else
-			break;
-
-		if (id != BAD_APICID)
-			__set_bit(APIC_CLUSTERID(id), clustermap);
-	}
-
-	/* Problem:  Partially populated chassis may not have CPUs in some of
-	 * the APIC clusters they have been allocated.  Only present CPUs have
-	 * x86_bios_cpu_apicid entries, thus causing zeroes in the bitmap.
-	 * Since clusters are allocated sequentially, count zeros only if
-	 * they are bounded by ones.
-	 */
-	clusters = 0;
-	zeros = 0;
-	for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
-		if (test_bit(i, clustermap)) {
-			clusters += 1 + zeros;
-			zeros = 0;
-		} else
-			++zeros;
-	}
-
-	return clusters;
-}
-
 static int multi_checked;
 static int multi;
 
@@ -2540,20 +2482,7 @@ static void dmi_check_multi(void)
 int apic_is_clustered_box(void)
 {
 	dmi_check_multi();
-	if (multi)
-		return 1;
-
-	if (!is_vsmp_box())
-		return 0;
-
-	/*
-	 * ScaleMP vSMPowered boxes have one cluster per board and TSCs are
-	 * not guaranteed to be synced between boards
-	 */
-	if (apic_cluster_num() > 1)
-		return 1;
-
-	return 0;
+	return multi;
 }
 #endif
 

arch/x86/kernel/apic/apic_flat_64.c

@@ -168,21 +168,16 @@ static struct apic apic_flat =  {
 	.disable_esr			= 0,
 	.dest_logical			= APIC_DEST_LOGICAL,
 	.check_apicid_used		= NULL,
-	.check_apicid_present		= NULL,
 
 	.vector_allocation_domain	= flat_vector_allocation_domain,
 	.init_apic_ldr			= flat_init_apic_ldr,
 
 	.ioapic_phys_id_map		= NULL,
 	.setup_apic_routing		= NULL,
-	.multi_timer_check		= NULL,
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
-	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= flat_phys_pkg_id,
-	.mps_oem_check			= NULL,
 
 	.get_apic_id			= flat_get_apic_id,
 	.set_apic_id			= set_apic_id,
@@ -196,10 +191,7 @@ static struct apic apic_flat =  {
 	.send_IPI_all			= flat_send_IPI_all,
 	.send_IPI_self			= apic_send_IPI_self,
 
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= false,
-	.smp_callin_clear_local_apic	= NULL,
 	.inquire_remote_apic		= default_inquire_remote_apic,
 
 	.read				= native_apic_mem_read,
@@ -283,7 +275,6 @@ static struct apic apic_physflat =  {
 	.disable_esr			= 0,
 	.dest_logical			= 0,
 	.check_apicid_used		= NULL,
-	.check_apicid_present		= NULL,
 
 	.vector_allocation_domain	= default_vector_allocation_domain,
 	/* not needed, but shouldn't hurt: */
@@ -291,14 +282,10 @@ static struct apic apic_physflat =  {
 
 	.ioapic_phys_id_map		= NULL,
 	.setup_apic_routing		= NULL,
-	.multi_timer_check		= NULL,
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
-	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= flat_phys_pkg_id,
-	.mps_oem_check			= NULL,
 
 	.get_apic_id			= flat_get_apic_id,
 	.set_apic_id			= set_apic_id,
@@ -312,10 +299,7 @@ static struct apic apic_physflat =  {
 	.send_IPI_all			= physflat_send_IPI_all,
 	.send_IPI_self			= apic_send_IPI_self,
 
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= false,
-	.smp_callin_clear_local_apic	= NULL,
 	.inquire_remote_apic		= default_inquire_remote_apic,
 
 	.read				= native_apic_mem_read,

arch/x86/kernel/apic/apic_noop.c

@@ -89,16 +89,6 @@ static const struct cpumask *noop_target_cpus(void)
 	return cpumask_of(0);
 }
 
-static unsigned long noop_check_apicid_used(physid_mask_t *map, int apicid)
-{
-	return physid_isset(apicid, *map);
-}
-
-static unsigned long noop_check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
 static void noop_vector_allocation_domain(int cpu, struct cpumask *retmask,
 					  const struct cpumask *mask)
 {
@@ -133,27 +123,21 @@ struct apic apic_noop = {
 	.target_cpus			= noop_target_cpus,
 	.disable_esr			= 0,
 	.dest_logical			= APIC_DEST_LOGICAL,
-	.check_apicid_used		= noop_check_apicid_used,
-	.check_apicid_present		= noop_check_apicid_present,
+	.check_apicid_used		= default_check_apicid_used,
 
 	.vector_allocation_domain	= noop_vector_allocation_domain,
 	.init_apic_ldr			= noop_init_apic_ldr,
 
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
 	.setup_apic_routing		= NULL,
-	.multi_timer_check		= NULL,
 
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= physid_set_mask_of_physid,
 
-	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
 
 	.phys_pkg_id			= noop_phys_pkg_id,
 
-	.mps_oem_check			= NULL,
-
 	.get_apic_id			= noop_get_apic_id,
 	.set_apic_id			= NULL,
 	.apic_id_mask			= 0x0F << 24,
@@ -168,12 +152,7 @@ struct apic apic_noop = {
 
 	.wakeup_secondary_cpu		= noop_wakeup_secondary_cpu,
 
-	/* should be safe */
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-
 	.wait_for_init_deassert		= false,
-	.smp_callin_clear_local_apic	= NULL,
 	.inquire_remote_apic		= NULL,
 
 	.read				= noop_apic_read,

arch/x86/kernel/apic/apic_numachip.c

@@ -217,21 +217,16 @@ static const struct apic apic_numachip __refconst = {
 	.disable_esr			= 0,
 	.dest_logical			= 0,
 	.check_apicid_used		= NULL,
-	.check_apicid_present		= NULL,
 
 	.vector_allocation_domain	= default_vector_allocation_domain,
 	.init_apic_ldr			= flat_init_apic_ldr,
 
 	.ioapic_phys_id_map		= NULL,
 	.setup_apic_routing		= NULL,
-	.multi_timer_check		= NULL,
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
-	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= numachip_phys_pkg_id,
-	.mps_oem_check			= NULL,
 
 	.get_apic_id			= get_apic_id,
 	.set_apic_id			= set_apic_id,
@@ -246,10 +241,7 @@ static const struct apic apic_numachip __refconst = {
 	.send_IPI_self			= numachip_send_IPI_self,
 
 	.wakeup_secondary_cpu		= numachip_wakeup_secondary,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= false,
-	.smp_callin_clear_local_apic	= NULL,
 	.inquire_remote_apic		= NULL, /* REMRD not supported */
 
 	.read				= native_apic_mem_read,

arch/x86/kernel/apic/bigsmp_32.c

@@ -31,11 +31,6 @@ static unsigned long bigsmp_check_apicid_used(physid_mask_t *map, int apicid)
 	return 0;
 }
 
-static unsigned long bigsmp_check_apicid_present(int bit)
-{
-	return 1;
-}
-
 static int bigsmp_early_logical_apicid(int cpu)
 {
 	/* on bigsmp, logical apicid is the same as physical */
@@ -168,21 +163,16 @@ static struct apic apic_bigsmp = {
 	.disable_esr			= 1,
 	.dest_logical			= 0,
 	.check_apicid_used		= bigsmp_check_apicid_used,
-	.check_apicid_present		= bigsmp_check_apicid_present,
 
 	.vector_allocation_domain	= default_vector_allocation_domain,
 	.init_apic_ldr			= bigsmp_init_apic_ldr,
 
 	.ioapic_phys_id_map		= bigsmp_ioapic_phys_id_map,
 	.setup_apic_routing		= bigsmp_setup_apic_routing,
-	.multi_timer_check		= NULL,
 	.cpu_present_to_apicid		= bigsmp_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= physid_set_mask_of_physid,
-	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= bigsmp_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= bigsmp_phys_pkg_id,
-	.mps_oem_check			= NULL,
 
 	.get_apic_id			= bigsmp_get_apic_id,
 	.set_apic_id			= NULL,
@@ -196,11 +186,7 @@ static struct apic apic_bigsmp = {
 	.send_IPI_all			= bigsmp_send_IPI_all,
 	.send_IPI_self			= default_send_IPI_self,
 
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-
 	.wait_for_init_deassert		= true,
-	.smp_callin_clear_local_apic	= NULL,
 	.inquire_remote_apic		= default_inquire_remote_apic,
 
 	.read				= native_apic_mem_read,

arch/x86/kernel/apic/probe_32.c

@@ -88,21 +88,16 @@ static struct apic apic_default = {
 	.disable_esr			= 0,
 	.dest_logical			= APIC_DEST_LOGICAL,
 	.check_apicid_used		= default_check_apicid_used,
-	.check_apicid_present		= default_check_apicid_present,
 
 	.vector_allocation_domain	= flat_vector_allocation_domain,
 	.init_apic_ldr			= default_init_apic_ldr,
 
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
 	.setup_apic_routing		= setup_apic_flat_routing,
-	.multi_timer_check		= NULL,
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= physid_set_mask_of_physid,
-	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= default_phys_pkg_id,
-	.mps_oem_check			= NULL,
 
 	.get_apic_id			= default_get_apic_id,
 	.set_apic_id			= NULL,
@@ -116,11 +111,7 @@ static struct apic apic_default = {
 	.send_IPI_all			= default_send_IPI_all,
 	.send_IPI_self			= default_send_IPI_self,
 
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-
 	.wait_for_init_deassert		= true,
-	.smp_callin_clear_local_apic	= NULL,
 	.inquire_remote_apic		= default_inquire_remote_apic,
 
 	.read				= native_apic_mem_read,
@@ -214,29 +205,7 @@ void __init generic_apic_probe(void)
 	printk(KERN_INFO "Using APIC driver %s\n", apic->name);
 }
 
-/* These functions can switch the APIC even after the initial ->probe() */
-
-int __init
-generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
-	struct apic **drv;
-
-	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
-		if (!((*drv)->mps_oem_check))
-			continue;
-		if (!(*drv)->mps_oem_check(mpc, oem, productid))
-			continue;
-
-		if (!cmdline_apic) {
-			apic = *drv;
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
-			       apic->name);
-		}
-		return 1;
-	}
-	return 0;
-}
-
+/* This function can switch the APIC even after the initial ->probe() */
 int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	struct apic **drv;

arch/x86/kernel/apic/x2apic_cluster.c

@@ -249,21 +249,16 @@ static struct apic apic_x2apic_cluster = {
 	.disable_esr			= 0,
 	.dest_logical			= APIC_DEST_LOGICAL,
 	.check_apicid_used		= NULL,
-	.check_apicid_present		= NULL,
 
 	.vector_allocation_domain	= cluster_vector_allocation_domain,
 	.init_apic_ldr			= init_x2apic_ldr,
 
 	.ioapic_phys_id_map		= NULL,
 	.setup_apic_routing		= NULL,
-	.multi_timer_check		= NULL,
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
-	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= x2apic_phys_pkg_id,
-	.mps_oem_check			= NULL,
 
 	.get_apic_id			= x2apic_get_apic_id,
 	.set_apic_id			= x2apic_set_apic_id,
@@ -277,10 +272,7 @@ static struct apic apic_x2apic_cluster = {
 	.send_IPI_all			= x2apic_send_IPI_all,
 	.send_IPI_self			= x2apic_send_IPI_self,
 
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= false,
-	.smp_callin_clear_local_apic	= NULL,
 	.inquire_remote_apic		= NULL,
 
 	.read				= native_apic_msr_read,

arch/x86/kernel/apic/x2apic_phys.c

@@ -103,21 +103,16 @@ static struct apic apic_x2apic_phys = {
 	.disable_esr			= 0,
 	.dest_logical			= 0,
 	.check_apicid_used		= NULL,
-	.check_apicid_present		= NULL,
 
 	.vector_allocation_domain	= default_vector_allocation_domain,
 	.init_apic_ldr			= init_x2apic_ldr,
 
 	.ioapic_phys_id_map		= NULL,
 	.setup_apic_routing		= NULL,
-	.multi_timer_check		= NULL,
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
-	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= x2apic_phys_pkg_id,
-	.mps_oem_check			= NULL,
 
 	.get_apic_id			= x2apic_get_apic_id,
 	.set_apic_id			= x2apic_set_apic_id,
@@ -131,10 +126,7 @@ static struct apic apic_x2apic_phys = {
 	.send_IPI_all			= x2apic_send_IPI_all,
 	.send_IPI_self			= x2apic_send_IPI_self,
 
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= false,
-	.smp_callin_clear_local_apic	= NULL,
 	.inquire_remote_apic		= NULL,
 
 	.read				= native_apic_msr_read,

arch/x86/kernel/apic/x2apic_uv_x.c

@@ -365,21 +365,16 @@ static struct apic __refdata apic_x2apic_uv_x = {
 	.disable_esr			= 0,
 	.dest_logical			= APIC_DEST_LOGICAL,
 	.check_apicid_used		= NULL,
-	.check_apicid_present		= NULL,
 
 	.vector_allocation_domain	= default_vector_allocation_domain,
 	.init_apic_ldr			= uv_init_apic_ldr,
 
 	.ioapic_phys_id_map		= NULL,
 	.setup_apic_routing		= NULL,
-	.multi_timer_check		= NULL,
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
-	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= uv_phys_pkg_id,
-	.mps_oem_check			= NULL,
 
 	.get_apic_id			= x2apic_get_apic_id,
 	.set_apic_id			= set_apic_id,
@@ -394,10 +389,7 @@ static struct apic __refdata apic_x2apic_uv_x = {
 	.send_IPI_self			= uv_send_IPI_self,
 
 	.wakeup_secondary_cpu		= uv_wakeup_secondary,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= false,
-	.smp_callin_clear_local_apic	= NULL,
 	.inquire_remote_apic		= NULL,
 
 	.read				= native_apic_msr_read,

arch/x86/kernel/devicetree.c

@@ -21,6 +21,7 @@
 #include <asm/apic.h>
 #include <asm/pci_x86.h>
 #include <asm/setup.h>
+#include <asm/i8259.h>
 
 __initdata u64 initial_dtb;
 char __initdata cmd_line[COMMAND_LINE_SIZE];
@@ -165,82 +166,6 @@ static void __init dtb_lapic_setup(void)
 #ifdef CONFIG_X86_IO_APIC
 static unsigned int ioapic_id;
 
-static void __init dtb_add_ioapic(struct device_node *dn)
-{
-	struct resource r;
-	int ret;
-
-	ret = of_address_to_resource(dn, 0, &r);
-	if (ret) {
-		printk(KERN_ERR "Can't obtain address from node %s.\n",
-				dn->full_name);
-		return;
-	}
-	mp_register_ioapic(++ioapic_id, r.start, gsi_top);
-}
-
-static void __init dtb_ioapic_setup(void)
-{
-	struct device_node *dn;
-
-	for_each_compatible_node(dn, NULL, "intel,ce4100-ioapic")
-		dtb_add_ioapic(dn);
-
-	if (nr_ioapics) {
-		of_ioapic = 1;
-		return;
-	}
-	printk(KERN_ERR "Error: No information about IO-APIC in OF.\n");
-}
-#else
-static void __init dtb_ioapic_setup(void) {}
-#endif
-
-static void __init dtb_apic_setup(void)
-{
-	dtb_lapic_setup();
-	dtb_ioapic_setup();
-}
-
-#ifdef CONFIG_OF_FLATTREE
-static void __init x86_flattree_get_config(void)
-{
-	u32 size, map_len;
-	void *dt;
-
-	if (!initial_dtb)
-		return;
-
-	map_len = max(PAGE_SIZE - (initial_dtb & ~PAGE_MASK), (u64)128);
-
-	initial_boot_params = dt = early_memremap(initial_dtb, map_len);
-	size = of_get_flat_dt_size();
-	if (map_len < size) {
-		early_iounmap(dt, map_len);
-		initial_boot_params = dt = early_memremap(initial_dtb, size);
-		map_len = size;
-	}
-
-	unflatten_and_copy_device_tree();
-	early_iounmap(dt, map_len);
-}
-#else
-static inline void x86_flattree_get_config(void) { }
-#endif
-
-void __init x86_dtb_init(void)
-{
-	x86_flattree_get_config();
-
-	if (!of_have_populated_dt())
-		return;
-
-	dtb_setup_hpet();
-	dtb_apic_setup();
-}
-
-#ifdef CONFIG_X86_IO_APIC
-
 struct of_ioapic_type {
 	u32 out_type;
 	u32 trigger;
@@ -276,10 +201,8 @@ static int ioapic_xlate(struct irq_domain *domain,
 			const u32 *intspec, u32 intsize,
 			irq_hw_number_t *out_hwirq, u32 *out_type)
 {
-	struct io_apic_irq_attr attr;
 	struct of_ioapic_type *it;
-	u32 line, idx;
-	int rc;
+	u32 line, idx, gsi;
 
 	if (WARN_ON(intsize < 2))
 		return -EINVAL;
@@ -291,13 +214,10 @@ static int ioapic_xlate(struct irq_domain *domain,
 
 	it = &of_ioapic_type[intspec[1]];
 
-	idx = (u32) domain->host_data;
-	set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity);
-
-	rc = io_apic_setup_irq_pin_once(irq_find_mapping(domain, line),
-					cpu_to_node(0), &attr);
-	if (rc)
-		return rc;
+	idx = (u32)(long)domain->host_data;
+	gsi = mp_pin_to_gsi(idx, line);
+	if (mp_set_gsi_attr(gsi, it->trigger, it->polarity, cpu_to_node(0)))
+		return -EBUSY;
 
 	*out_hwirq = line;
 	*out_type = it->out_type;
@@ -305,81 +225,86 @@ static int ioapic_xlate(struct irq_domain *domain,
 }
 
 const struct irq_domain_ops ioapic_irq_domain_ops = {
+	.map = mp_irqdomain_map,
+	.unmap = mp_irqdomain_unmap,
 	.xlate = ioapic_xlate,
 };
 
-static void dt_add_ioapic_domain(unsigned int ioapic_num,
-		struct device_node *np)
+static void __init dtb_add_ioapic(struct device_node *dn)
 {
-	struct irq_domain *id;
-	struct mp_ioapic_gsi *gsi_cfg;
+	struct resource r;
 	int ret;
-	int num;
-
-	gsi_cfg = mp_ioapic_gsi_routing(ioapic_num);
-	num = gsi_cfg->gsi_end - gsi_cfg->gsi_base + 1;
-
-	id = irq_domain_add_linear(np, num, &ioapic_irq_domain_ops,
-			(void *)ioapic_num);
-	BUG_ON(!id);
-	if (gsi_cfg->gsi_base == 0) {
-		/*
-		 * The first NR_IRQS_LEGACY irq descs are allocated in
-		 * early_irq_init() and need just a mapping. The
-		 * remaining irqs need both. All of them are preallocated
-		 * and assigned so we can keep the 1:1 mapping which the ioapic
-		 * is having.
-		 */
-		irq_domain_associate_many(id, 0, 0, NR_IRQS_LEGACY);
+	struct ioapic_domain_cfg cfg = {
+		.type = IOAPIC_DOMAIN_DYNAMIC,
+		.ops = &ioapic_irq_domain_ops,
+		.dev = dn,
+	};
 
-		if (num > NR_IRQS_LEGACY) {
-			ret = irq_create_strict_mappings(id, NR_IRQS_LEGACY,
-					NR_IRQS_LEGACY, num - NR_IRQS_LEGACY);
-			if (ret)
-				pr_err("Error creating mapping for the "
-						"remaining IRQs: %d\n", ret);
-		}
-		irq_set_default_host(id);
-	} else {
-		ret = irq_create_strict_mappings(id, gsi_cfg->gsi_base, 0, num);
-		if (ret)
-			pr_err("Error creating IRQ mapping: %d\n", ret);
+	ret = of_address_to_resource(dn, 0, &r);
+	if (ret) {
+		printk(KERN_ERR "Can't obtain address from node %s.\n",
+				dn->full_name);
+		return;
 	}
+	mp_register_ioapic(++ioapic_id, r.start, gsi_top, &cfg);
 }
 
-static void __init ioapic_add_ofnode(struct device_node *np)
+static void __init dtb_ioapic_setup(void)
 {
-	struct resource r;
-	int i, ret;
+	struct device_node *dn;
 
-	ret = of_address_to_resource(np, 0, &r);
-	if (ret) {
-		printk(KERN_ERR "Failed to obtain address for %s\n",
-				np->full_name);
-		return;
-	}
+	for_each_compatible_node(dn, NULL, "intel,ce4100-ioapic")
+		dtb_add_ioapic(dn);
 
-	for (i = 0; i < nr_ioapics; i++) {
-		if (r.start == mpc_ioapic_addr(i)) {
-			dt_add_ioapic_domain(i, np);
+	if (nr_ioapics) {
+		of_ioapic = 1;
 		return;
 	}
-	}
-	printk(KERN_ERR "IOxAPIC at %s is not registered.\n", np->full_name);
+	printk(KERN_ERR "Error: No information about IO-APIC in OF.\n");
+}
+#else
+static void __init dtb_ioapic_setup(void) {}
+#endif
+
+static void __init dtb_apic_setup(void)
+{
+	dtb_lapic_setup();
+	dtb_ioapic_setup();
 }
 
-void __init x86_add_irq_domains(void)
+#ifdef CONFIG_OF_FLATTREE
+static void __init x86_flattree_get_config(void)
 {
-	struct device_node *dp;
+	u32 size, map_len;
+	void *dt;
 
-	if (!of_have_populated_dt())
+	if (!initial_dtb)
 		return;
 
-	for_each_node_with_property(dp, "interrupt-controller") {
-		if (of_device_is_compatible(dp, "intel,ce4100-ioapic"))
-			ioapic_add_ofnode(dp);
+	map_len = max(PAGE_SIZE - (initial_dtb & ~PAGE_MASK), (u64)128);
+
+	initial_boot_params = dt = early_memremap(initial_dtb, map_len);
+	size = of_get_flat_dt_size();
+	if (map_len < size) {
+		early_iounmap(dt, map_len);
+		initial_boot_params = dt = early_memremap(initial_dtb, size);
+		map_len = size;
 	}
+
+	unflatten_and_copy_device_tree();
+	early_iounmap(dt, map_len);
 }
 #else
-void __init x86_add_irq_domains(void) { }
+static inline void x86_flattree_get_config(void) { }
 #endif
+
+void __init x86_dtb_init(void)
+{
+	x86_flattree_get_config();
+
+	if (!of_have_populated_dt())
+		return;
+
+	dtb_setup_hpet();
+	dtb_apic_setup();
+}

arch/x86/kernel/irqinit.c

@@ -78,7 +78,7 @@ void __init init_ISA_irqs(void)
 #endif
 	legacy_pic->init(0);
 
-	for (i = 0; i < legacy_pic->nr_legacy_irqs; i++)
+	for (i = 0; i < nr_legacy_irqs(); i++)
 		irq_set_chip_and_handler_name(i, chip, handle_level_irq, name);
 }
 
@@ -86,12 +86,6 @@ void __init init_IRQ(void)
 {
 	int i;
 
-	/*
-	 * We probably need a better place for this, but it works for
-	 * now ...
-	 */
-	x86_add_irq_domains();
-
 	/*
 	 * On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
 	 * If these IRQ's are handled by legacy interrupt-controllers like PIC,
@@ -100,7 +94,7 @@ void __init init_IRQ(void)
 	 * then this vector space can be freed and re-used dynamically as the
 	 * irq's migrate etc.
 	 */
-	for (i = 0; i < legacy_pic->nr_legacy_irqs; i++)
+	for (i = 0; i < nr_legacy_irqs(); i++)
 		per_cpu(vector_irq, 0)[IRQ0_VECTOR + i] = i;
 
 	x86_init.irqs.intr_init();
@@ -121,7 +115,7 @@ void setup_vector_irq(int cpu)
 	 * legacy PIC, for the new cpu that is coming online, setup the static
 	 * legacy vector to irq mapping:
 	 */
-	for (irq = 0; irq < legacy_pic->nr_legacy_irqs; irq++)
+	for (irq = 0; irq < nr_legacy_irqs(); irq++)
 		per_cpu(vector_irq, cpu)[IRQ0_VECTOR + irq] = irq;
 #endif
 

arch/x86/kernel/smpboot.c

@@ -168,10 +168,6 @@ static void smp_callin(void)
 	 * CPU, first the APIC. (this is probably redundant on most
 	 * boards)
 	 */
-
-	pr_debug("CALLIN, before setup_local_APIC()\n");
-	if (apic->smp_callin_clear_local_apic)
-		apic->smp_callin_clear_local_apic();
 	setup_local_APIC();
 	end_local_APIC_setup();
 
@@ -1143,10 +1139,6 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 		enable_IO_APIC();
 
 	bsp_end_local_APIC_setup();
-
-	if (apic->setup_portio_remap)
-		apic->setup_portio_remap();
-
 	smpboot_setup_io_apic();
 	/*
 	 * Set up local APIC timer on boot CPU.

arch/x86/kernel/vsmp_64.c

@@ -152,7 +152,7 @@ static void __init detect_vsmp_box(void)
 		is_vsmp = 1;
 }
 
-int is_vsmp_box(void)
+static int is_vsmp_box(void)
 {
 	if (is_vsmp != -1)
 		return is_vsmp;
@@ -166,7 +166,7 @@ int is_vsmp_box(void)
 static void __init detect_vsmp_box(void)
 {
 }
-int is_vsmp_box(void)
+static int is_vsmp_box(void)
 {
 	return 0;
 }

arch/x86/pci/acpi.c

@@ -448,7 +448,7 @@ static void probe_pci_root_info(struct pci_root_info *info,
 		return;
 
 	size = sizeof(*info->res) * info->res_num;
-	info->res = kzalloc(size, GFP_KERNEL);
+	info->res = kzalloc_node(size, GFP_KERNEL, info->sd.node);
 	if (!info->res) {
 		info->res_num = 0;
 		return;
@@ -456,7 +456,7 @@ static void probe_pci_root_info(struct pci_root_info *info,
 
 	size = sizeof(*info->res_offset) * info->res_num;
 	info->res_num = 0;
-	info->res_offset = kzalloc(size, GFP_KERNEL);
+	info->res_offset = kzalloc_node(size, GFP_KERNEL, info->sd.node);
 	if (!info->res_offset) {
 		kfree(info->res);
 		info->res = NULL;
@@ -499,7 +499,7 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 	if (node != NUMA_NO_NODE && !node_online(node))
 		node = NUMA_NO_NODE;
 
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	info = kzalloc_node(sizeof(*info), GFP_KERNEL, node);
 	if (!info) {
 		printk(KERN_WARNING "pci_bus %04x:%02x: "
 		       "ignored (out of memory)\n", domain, busnum);

arch/x86/pci/intel_mid_pci.c

@@ -208,27 +208,31 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
 
 static int intel_mid_pci_irq_enable(struct pci_dev *dev)
 {
-	u8 pin;
-	struct io_apic_irq_attr irq_attr;
+	int polarity;
 
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+	if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER)
+		polarity = 0; /* active high */
+	else
+		polarity = 1; /* active low */
 
 	/*
 	 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
 	 * IOAPIC RTE entries, so we just enable RTE for the device.
 	 */
-	irq_attr.ioapic = mp_find_ioapic(dev->irq);
-	irq_attr.ioapic_pin = dev->irq;
-	irq_attr.trigger = 1; /* level */
-	if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER)
-		irq_attr.polarity = 0; /* active high */
-	else
-		irq_attr.polarity = 1; /* active low */
-	io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
+	if (mp_set_gsi_attr(dev->irq, 1, polarity, dev_to_node(&dev->dev)))
+		return -EBUSY;
+	if (mp_map_gsi_to_irq(dev->irq, IOAPIC_MAP_ALLOC) < 0)
+		return -EBUSY;
 
 	return 0;
 }
 
+static void intel_mid_pci_irq_disable(struct pci_dev *dev)
+{
+	if (!dev->dev.power.is_prepared && dev->irq > 0)
+		mp_unmap_irq(dev->irq);
+}
+
 struct pci_ops intel_mid_pci_ops = {
 	.read = pci_read,
 	.write = pci_write,
@@ -245,6 +249,7 @@ int __init intel_mid_pci_init(void)
 	pr_info("Intel MID platform detected, using MID PCI ops\n");
 	pci_mmcfg_late_init();
 	pcibios_enable_irq = intel_mid_pci_irq_enable;
+	pcibios_disable_irq = intel_mid_pci_irq_disable;
 	pci_root_ops = intel_mid_pci_ops;
 	pci_soc_mode = 1;
 	/* Continue with standard init */

arch/x86/pci/irq.c

@@ -26,6 +26,7 @@ static int acer_tm360_irqrouting;
 static struct irq_routing_table *pirq_table;
 
 static int pirq_enable_irq(struct pci_dev *dev);
+static void pirq_disable_irq(struct pci_dev *dev);
 
 /*
  * Never use: 0, 1, 2 (timer, keyboard, and cascade)
@@ -53,7 +54,7 @@ struct irq_router_handler {
 };
 
 int (*pcibios_enable_irq)(struct pci_dev *dev) = pirq_enable_irq;
-void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL;
+void (*pcibios_disable_irq)(struct pci_dev *dev) = pirq_disable_irq;
 
 /*
  *  Check passed address for the PCI IRQ Routing Table signature
@@ -1186,7 +1187,7 @@ void pcibios_penalize_isa_irq(int irq, int active)
 
 static int pirq_enable_irq(struct pci_dev *dev)
 {
-	u8 pin;
+	u8 pin = 0;
 
 	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
 	if (pin && !pcibios_lookup_irq(dev, 1)) {
@@ -1227,8 +1228,6 @@ static int pirq_enable_irq(struct pci_dev *dev)
 			}
 			dev = temp_dev;
 			if (irq >= 0) {
-				io_apic_set_pci_routing(&dev->dev, irq,
-							 &irq_attr);
 				dev->irq = irq;
 				dev_info(&dev->dev, "PCI->APIC IRQ transform: "
 					 "INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
@@ -1254,3 +1253,12 @@ static int pirq_enable_irq(struct pci_dev *dev)
 	}
 	return 0;
 }
+
+static void pirq_disable_irq(struct pci_dev *dev)
+{
+	if (io_apic_assign_pci_irqs && !dev->dev.power.is_prepared &&
+	    dev->irq) {
+		mp_unmap_irq(dev->irq);
+		dev->irq = 0;
+	}
+}

arch/x86/pci/xen.c

@@ -23,6 +23,7 @@
 #include <xen/features.h>
 #include <xen/events.h>
 #include <asm/xen/pci.h>
+#include <asm/i8259.h>
 
 static int xen_pcifront_enable_irq(struct pci_dev *dev)
 {
@@ -40,7 +41,7 @@ static int xen_pcifront_enable_irq(struct pci_dev *dev)
 	/* In PV DomU the Xen PCI backend puts the PIRQ in the interrupt line.*/
 	pirq = gsi;
 
-	if (gsi < NR_IRQS_LEGACY)
+	if (gsi < nr_legacy_irqs())
 		share = 0;
 
 	rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront");
@@ -511,7 +512,7 @@ int __init pci_xen_initial_domain(void)
 	xen_setup_acpi_sci();
 	__acpi_register_gsi = acpi_register_gsi_xen;
 	/* Pre-allocate legacy irqs */
-	for (irq = 0; irq < NR_IRQS_LEGACY; irq++) {
+	for (irq = 0; irq < nr_legacy_irqs(); irq++) {
 		int trigger, polarity;
 
 		if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
@@ -522,7 +523,7 @@ int __init pci_xen_initial_domain(void)
 			true /* Map GSI to PIRQ */);
 	}
 	if (0 == nr_ioapics) {
-		for (irq = 0; irq < NR_IRQS_LEGACY; irq++)
+		for (irq = 0; irq < nr_legacy_irqs(); irq++)
 			xen_bind_pirq_gsi_to_irq(irq, irq, 0, "xt-pic");
 	}
 	return 0;

arch/x86/platform/ce4100/ce4100.c

@@ -135,14 +135,10 @@ static void __init sdv_arch_setup(void)
 	sdv_serial_fixup();
 }
 
-#ifdef CONFIG_X86_IO_APIC
 static void sdv_pci_init(void)
 {
 	x86_of_pci_init();
-	/* We can't set this earlier, because we need to calibrate the timer */
-	legacy_pic = &null_legacy_pic;
 }
-#endif
 
 /*
  * CE4100 specific x86_init function overrides and early setup
@@ -155,7 +151,9 @@ void __init x86_ce4100_early_setup(void)
 	x86_init.resources.probe_roms = x86_init_noop;
 	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
 	x86_init.mpparse.find_smp_config = x86_init_noop;
+	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck;
 	x86_init.pci.init = ce4100_pci_init;
+	x86_init.pci.init_irq = sdv_pci_init;
 
 	/*
 	 * By default, the reboot method is ACPI which is supported by the
@@ -166,10 +164,5 @@ void __init x86_ce4100_early_setup(void)
 	 */
 	reboot_type = BOOT_KBD;
 
-#ifdef CONFIG_X86_IO_APIC
-	x86_init.pci.init_irq = sdv_pci_init;
-	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck;
-#endif
-
 	pm_power_off = ce4100_power_off;
 }

arch/x86/platform/intel-mid/device_libs/platform_wdt.c

@@ -26,28 +26,18 @@ static struct platform_device wdt_dev = {
 
 static int tangier_probe(struct platform_device *pdev)
 {
-	int ioapic;
-	int irq;
+	int gsi;
 	struct intel_mid_wdt_pdata *pdata = pdev->dev.platform_data;
-	struct io_apic_irq_attr irq_attr = { 0 };
 
 	if (!pdata)
 		return -EINVAL;
 
-	irq = pdata->irq;
-	ioapic = mp_find_ioapic(irq);
-	if (ioapic >= 0) {
-		int ret;
-		irq_attr.ioapic = ioapic;
-		irq_attr.ioapic_pin = irq;
-		irq_attr.trigger = 1;
-		/* irq_attr.polarity = 0; -> Active high */
-		ret = io_apic_set_pci_routing(NULL, irq, &irq_attr);
-		if (ret)
-			return ret;
-	} else {
+	/* IOAPIC builds identity mapping between GSI and IRQ on MID */
+	gsi = pdata->irq;
+	if (mp_set_gsi_attr(gsi, 1, 0, cpu_to_node(0)) ||
+	    mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC) <= 0) {
 		dev_warn(&pdev->dev, "cannot find interrupt %d in ioapic\n",
-			 irq);
+			 gsi);
 		return -EINVAL;
 	}
 

arch/x86/platform/intel-mid/sfi.c

@@ -432,9 +432,8 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 	struct sfi_table_simple *sb;
 	struct sfi_device_table_entry *pentry;
 	struct devs_id *dev = NULL;
-	int num, i;
-	int ioapic;
-	struct io_apic_irq_attr irq_attr;
+	int num, i, ret;
+	int polarity;
 
 	sb = (struct sfi_table_simple *)table;
 	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
@@ -448,35 +447,30 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 			 * devices, but they have separate RTE entry in IOAPIC
 			 * so we have to enable them one by one here
 			 */
-			ioapic = mp_find_ioapic(irq);
-			if (ioapic >= 0) {
-				irq_attr.ioapic = ioapic;
-				irq_attr.ioapic_pin = irq;
-				irq_attr.trigger = 1;
 			if (intel_mid_identify_cpu() ==
 					INTEL_MID_CPU_CHIP_TANGIER) {
-					if (!strncmp(pentry->name,
-							"r69001-ts-i2c", 13))
+				if (!strncmp(pentry->name, "r69001-ts-i2c", 13))
 					/* active low */
-						irq_attr.polarity = 1;
+					polarity = 1;
 				else if (!strncmp(pentry->name,
 						"synaptics_3202", 14))
 					/* active low */
-						irq_attr.polarity = 1;
+					polarity = 1;
 				else if (irq == 41)
 					/* fast_int_1 */
-						irq_attr.polarity = 1;
+					polarity = 1;
 				else
 					/* active high */
-						irq_attr.polarity = 0;
+					polarity = 0;
 			} else {
 				/* PNW and CLV go with active low */
-					irq_attr.polarity = 1;
-				}
-				io_apic_set_pci_routing(NULL, irq, &irq_attr);
+				polarity = 1;
 			}
-		} else {
-			irq = 0; /* No irq */
+
+			ret = mp_set_gsi_attr(irq, 1, polarity, NUMA_NO_NODE);
+			if (ret == 0)
+				ret = mp_map_gsi_to_irq(irq, IOAPIC_MAP_ALLOC);
+			WARN_ON(ret < 0);
 		}
 
 		dev = get_device_id(pentry->type, pentry->name);

arch/x86/platform/sfi/sfi.c

@@ -25,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/sfi.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
 
 #include <asm/io_apic.h>
 #include <asm/mpspec.h>
@@ -70,19 +71,26 @@ static int __init sfi_parse_cpus(struct sfi_table_header *table)
 #endif /* CONFIG_X86_LOCAL_APIC */
 
 #ifdef CONFIG_X86_IO_APIC
+static struct irq_domain_ops sfi_ioapic_irqdomain_ops = {
+	.map = mp_irqdomain_map,
+};
 
 static int __init sfi_parse_ioapic(struct sfi_table_header *table)
 {
 	struct sfi_table_simple *sb;
 	struct sfi_apic_table_entry *pentry;
 	int i, num;
+	struct ioapic_domain_cfg cfg = {
+		.type = IOAPIC_DOMAIN_STRICT,
+		.ops = &sfi_ioapic_irqdomain_ops,
+	};
 
 	sb = (struct sfi_table_simple *)table;
 	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_apic_table_entry);
 	pentry = (struct sfi_apic_table_entry *)sb->pentry;
 
 	for (i = 0; i < num; i++) {
-		mp_register_ioapic(i, pentry->phys_addr, gsi_top);
+		mp_register_ioapic(i, pentry->phys_addr, gsi_top, &cfg);
 		pentry++;
 	}
 

drivers/acpi/pci_irq.c

@@ -481,6 +481,10 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
 	if (!pin)
 		return;
 
+	/* Keep IOAPIC pin configuration when suspending */
+	if (dev->dev.power.is_prepared)
+		return;
+
 	entry = acpi_pci_irq_lookup(dev, pin);
 	if (!entry)
 		return;
@@ -498,5 +502,6 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
 	 */
 
 	dev_dbg(&dev->dev, "PCI INT %c disabled\n", pin_name(pin));
+	if (gsi >= 0 && dev->irq > 0)
 		acpi_unregister_gsi(gsi);
 }