Revert "[media] v4l2: Add a V4L2 driver for SI476X MFD"

As requested by Andrey Smirnov <andrew.smirnov@gmail.com>, revert
this patch.

This reverts commit 30bac911.

Conflicts:
	drivers/media/radio/Kconfig
	drivers/media/radio/radio-si476x.c
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Documentation/video4linux/si476x.txt

-SI476x Driver Readme
-------------------------------------------------
-	Copyright (C) 2013 Andrey Smirnov <andrew.smirnov@gmail.com>
-
-TODO for the driver
-------------------------------
-
-- According to the SiLabs' datasheet it is possible to update the
-  firmware of the radio chip in the run-time, thus bringing it to the
-  most recent version. Unfortunately I couldn't find any mentioning of
-  the said firmware update for the old chips that I tested the driver
-  against, so for chips like that the driver only exposes the old
-  functionality.
-
-
-Parameters exposed over debugfs
--------------------------------
-SI476x allow user to get multiple characteristics that can be very
-useful for EoL testing/RF performance estimation, parameters that have
-very little to do with V4L2 subsystem. Such parameters are exposed via
-debugfs and can be accessed via regular file I/O operations.
-
-The drivers exposes following files:
-
-* /sys/kernel/debug/<device-name>/acf
-  This file contains ACF(Automatically Controlled Features) status
-  information. The contents of the file is binary data of the
-  following layout:
-
-  Offset	| Name		| Description
-  ====================================================================
-  0x00		| blend_int	| Flag, set when stereo separation has
-  		|  		| crossed below the blend threshold
-  --------------------------------------------------------------------
-  0x01		| hblend_int	| Flag, set when HiBlend cutoff
-  		| 		| frequency is lower than threshold
-  --------------------------------------------------------------------
-  0x02		| hicut_int	| Flag, set when HiCut cutoff
-  		| 		| frequency is lower than threshold
-  --------------------------------------------------------------------
-  0x03		| chbw_int	| Flag, set when channel filter
-  		| 		| bandwidth is less than threshold
-  --------------------------------------------------------------------
-  0x04		| softmute_int	| Flag indicating that softmute
-  		| 		| attenuation has increased above
-		|		| softmute threshold
-  --------------------------------------------------------------------
-  0x05		| smute		| 0 - Audio is not soft muted
-  		| 		| 1 - Audio is soft muted
-  --------------------------------------------------------------------
-  0x06		| smattn	| Soft mute attenuation level in dB
-  --------------------------------------------------------------------
-  0x07		| chbw		| Channel filter bandwidth in kHz
-  --------------------------------------------------------------------
-  0x08		| hicut		| HiCut cutoff frequency in units of
-  		| 		| 100Hz
-  --------------------------------------------------------------------
-  0x09		| hiblend	| HiBlend cutoff frequency in units
-  		| 		| of 100 Hz
-  --------------------------------------------------------------------
-  0x10		| pilot		| 0 - Stereo pilot is not present
-  		| 		| 1 - Stereo pilot is present
-  --------------------------------------------------------------------
-  0x11		| stblend	| Stereo blend in %
-  --------------------------------------------------------------------
-
-
-* /sys/kernel/debug/<device-name>/rds_blckcnt
-  This file contains statistics about RDS receptions. It's binary data
-  has the following layout:
-
-  Offset	| Name		| Description
-  ====================================================================
-  0x00		| expected	| Number of expected RDS blocks
-  --------------------------------------------------------------------
-  0x02		| received	| Number of received RDS blocks
-  --------------------------------------------------------------------
-  0x04		| uncorrectable	| Number of uncorrectable RDS blocks
-  --------------------------------------------------------------------
-
-* /sys/kernel/debug/<device-name>/agc
-  This file contains information about parameters pertaining to
-  AGC(Automatic Gain Control)
-
-  The layout is:
-  Offset	| Name		| Description
-  ====================================================================
-  0x00		| mxhi		| 0 - FM Mixer PD high threshold is
-  		| 		| not tripped
-		|		| 1 - FM Mixer PD high threshold is
-		|		| tripped
-  --------------------------------------------------------------------
-  0x01		| mxlo		| ditto for FM Mixer PD low
-  --------------------------------------------------------------------
-  0x02		| lnahi		| ditto for FM LNA PD high
-  --------------------------------------------------------------------
-  0x03		| lnalo		| ditto for FM LNA PD low
-  --------------------------------------------------------------------
-  0x04		| fmagc1	| FMAGC1 attenuator resistance
-  		| 		| (see datasheet for more detail)
-  --------------------------------------------------------------------
-  0x05		| fmagc2	| ditto for FMAGC2
-  --------------------------------------------------------------------
-  0x06		| pgagain	| PGA gain in dB
-  --------------------------------------------------------------------
-  0x07		| fmwblang	| FM/WB LNA Gain in dB
-  --------------------------------------------------------------------
-
-* /sys/kernel/debug/<device-name>/rsq
-  This file contains information about parameters pertaining to
-  RSQ(Received Signal Quality)
-
-  The layout is:
-  Offset	| Name		| Description
-  ====================================================================
-  0x00		| multhint	| 0 - multipath value has not crossed
-  		| 		| the Multipath high threshold
-		|		| 1 - multipath value has crossed
-  		| 		| the Multipath high threshold
-  --------------------------------------------------------------------
-  0x01		| multlint	| ditto for Multipath low threshold
-  --------------------------------------------------------------------
-  0x02		| snrhint	| 0 - received signal's SNR has not
-  		| 		| crossed high threshold
-		|		| 1 - received signal's SNR has
-  		| 		| crossed high threshold
-  --------------------------------------------------------------------
-  0x03		| snrlint	| ditto for low threshold
-  --------------------------------------------------------------------
-  0x04		| rssihint	| ditto for RSSI high threshold
-  --------------------------------------------------------------------
-  0x05		| rssilint	| ditto for RSSI low threshold
-  --------------------------------------------------------------------
-  0x06		| bltf		| Flag indicating if seek command
-  		| 		| reached/wrapped seek band limit
-  --------------------------------------------------------------------
-  0x07		| snr_ready	| Indicates that SNR metrics is ready
-  --------------------------------------------------------------------
-  0x08		| rssiready	| ditto for RSSI metrics
-  --------------------------------------------------------------------
-  0x09		| injside	| 0 - Low-side injection is being used
-  		| 		| 1 - High-side injection is used
-  --------------------------------------------------------------------
-  0x10		| afcrl		| Flag indicating if AFC rails
-  --------------------------------------------------------------------
-  0x11		| valid		| Flag indicating if channel is valid
-  --------------------------------------------------------------------
-  0x12		| readfreq	| Current tuned frequency
-  --------------------------------------------------------------------
-  0x14		| freqoff	| Singed frequency offset in units of
-  		| 		| 2ppm
-  --------------------------------------------------------------------
-  0x15		| rssi		| Signed value of RSSI in dBuV
-  --------------------------------------------------------------------
-  0x16		| snr		| Signed RF SNR in dB
-  --------------------------------------------------------------------
-  0x17		| issi		| Signed Image Strength Signal
-  		| 		| indicator
-  --------------------------------------------------------------------
-  0x18		| lassi		| Signed Low side adjacent Channel
-  		| 		| Strength indicator
-  --------------------------------------------------------------------
-  0x19		| hassi		| ditto fpr High side
-  --------------------------------------------------------------------
-  0x20		| mult		| Multipath indicator
-  --------------------------------------------------------------------
-  0x21		| dev		| Frequency deviation
-  --------------------------------------------------------------------
-  0x24		| assi		| Adjascent channel SSI
-  --------------------------------------------------------------------
-  0x25		| usn		| Ultrasonic noise indicator
-  --------------------------------------------------------------------
-  0x26		| pilotdev	| Pilot deviation in units of 100 Hz
-  --------------------------------------------------------------------
-  0x27		| rdsdev	| ditto for RDS
-  --------------------------------------------------------------------
-  0x28		| assidev	| ditto for ASSI
-  --------------------------------------------------------------------
-  0x29		| strongdev	| Frequency deviation
-  --------------------------------------------------------------------
-  0x30		| rdspi		| RDS PI code
-  --------------------------------------------------------------------
-
-* /sys/kernel/debug/<device-name>/rsq_primary
-  This file contains information about parameters pertaining to
-  RSQ(Received Signal Quality) for primary tuner only. Layout is as
-  the one above.

drivers/media/radio/Kconfig

@@ -18,23 +18,6 @@ config RADIO_SI470X
 
 source "drivers/media/radio/si470x/Kconfig"
 
-config RADIO_SI476X
-	tristate "Silicon Laboratories Si476x I2C FM Radio"
-	depends on I2C && VIDEO_V4L2 && SND && SND_SOC
-	select MFD_CORE
-	select MFD_SI476X_CORE
-	select SND_SOC_SI476X
-	---help---
-	  Choose Y here if you have this FM radio chip.
-
-	  In order to control your radio card, you will need to use programs
-	  that are compatible with the Video For Linux 2 API.  Information on
-	  this API and pointers to "v4l2" programs may be found at
-	  <file:Documentation/video4linux/API.html>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called radio-si476x.
-
 config USB_MR800
 	tristate "AverMedia MR 800 USB FM radio support"
 	depends on USB && VIDEO_V4L2

drivers/media/radio/Makefile

@@ -19,7 +19,6 @@ obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o
 obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
 obj-$(CONFIG_I2C_SI4713) += si4713-i2c.o
 obj-$(CONFIG_RADIO_SI4713) += radio-si4713.o
-obj-$(CONFIG_RADIO_SI476X) += radio-si476x.o
 obj-$(CONFIG_RADIO_MIROPCM20) += radio-miropcm20.o
 obj-$(CONFIG_USB_DSBR) += dsbr100.o
 obj-$(CONFIG_RADIO_SI470X) += si470x/