arm64: dts: uniphier: use macros in dt-bindings header

The dt-bindings header was applied to the driver subsystem.  I had to
wait for a merge window to use it from DT.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts

@@ -50,7 +50,7 @@ &serial0 {
 &gpio {
 	xirq0 {
 		gpio-hog;
-		gpios = <120 0>;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
 		input;
 	};
 };

arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi

@@ -8,6 +8,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
 
 /memreserve/ 0x80000000 0x02000000;
 
@@ -100,7 +101,7 @@ refclk: ref {
 
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
 	};
 
 	timer {

arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts

@@ -50,7 +50,7 @@ &serial0 {
 &gpio {
 	xirq0 {
 		gpio-hog;
-		gpios = <120 0>;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
 		input;
 	};
 };

arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi

@@ -8,6 +8,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
 #include <dt-bindings/thermal/thermal.h>
 
 /memreserve/ 0x80000000 0x02000000;
@@ -172,7 +173,7 @@ refclk: ref {
 
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
 	};
 
 	timer {

arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi

@@ -8,6 +8,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
 
 /memreserve/ 0x80000000 0x02000000;
 
@@ -128,7 +129,7 @@ refclk: ref {
 
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(5, 7) GPIO_ACTIVE_LOW>;
 	};
 
 	timer {