Skip to content

L
linux
Commit 8634155e authored by Tony Lindgren's avatar Tony Lindgren
Browse files
Options

Merge tag 'omap-cleanup-a-for-3.8' of... 

Merge tag 'omap-cleanup-a-for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8/cleanup-prcm

The first set of OMAP PRM/CM-related cleanup patches for 3.8.
Prepares for the future move of the PRM/CM code to drivers/.  Also
includes some prcm.[ch] cleanup patches from the WDTIMER cleanup
series that don't need external acks.

Basic test logs for this branch on top of v3.7-rc2 are here:

http://www.pwsan.com/omap/testlogs/prcm_cleanup_a_3.8/20121021123719/

But due to the number of unrelated regressions present in v3.7-rc[12],
it's not particularly usable as a testing base.  With reverts, fixes,
and workarounds applied as documented in:

http://www.pwsan.com/omap/testlogs/test_v3.7-rc2/20121020134755/README.txt

the following test logs were obtained:

http://www.pwsan.com/omap/testlogs/prcm_cleanup_a_3.8/20121020231757/

which indicate that the series tests cleanly.

Conflicts:
	arch/arm/mach-omap2/Makefile
	arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
	arch/arm/mach-omap2/pm24xx.c
parents 6d02643d 2bb2a5d3
Hide whitespace changes
Inline Side-by-side
Showing with 2750 additions and 2099 deletions
arch/arm/mach-omap1/common.h
View file @ 8634155e
......@@ -94,4 +94,6 @@ extern int ocpi_enable(void);
static inline int ocpi_enable(void) { return 0; }
#endif
extern int omap1_get_reset_sources(void);
#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
arch/arm/mach-omap1/reset.c
View file @ 8634155e
......@@ -10,6 +10,19 @@
#include "common.h"
/* ARM_SYSST bit shifts related to SoC reset sources */
#define ARM_SYSST_POR_SHIFT 5
#define ARM_SYSST_EXT_RST_SHIFT 4
#define ARM_SYSST_ARM_WDRST_SHIFT 2
#define ARM_SYSST_GLOB_SWRST_SHIFT 1
/* Standardized reset source bits (across all OMAP SoCs) */
#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0
#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1
#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3
#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5
void omap1_restart(char mode, const char *cmd)
{
/*
......@@ -23,3 +36,28 @@ void omap1_restart(char mode, const char *cmd)
omap_writew(1, ARM_RSTCT1);
}
/**
* omap1_get_reset_sources - return the source of the SoC's last reset
*
* Returns bits that represent the last reset source for the SoC. The
* format is standardized across OMAPs for use by the OMAP watchdog.
*/
int omap1_get_reset_sources(void)
{
int ret = 0;
u16 rs;
rs = __raw_readw(ARM_SYSST);
if (rs & (1 << ARM_SYSST_POR_SHIFT))
ret |= 1 << OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT;
if (rs & (1 << ARM_SYSST_EXT_RST_SHIFT))
ret |= 1 << OMAP_EXTWARM_RST_SRC_ID_SHIFT;
if (rs & (1 << ARM_SYSST_ARM_WDRST_SHIFT))
ret |= 1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT;
if (rs & (1 << ARM_SYSST_GLOB_SWRST_SHIFT))
ret |= 1 << OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT;
return ret;
}
arch/arm/mach-omap2/Makefile
View file @ 8634155e
......@@ -7,28 +7,34 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
omap_device.o
# INTCPS IP block support - XXX should be moved to drivers/
obj-$(CONFIG_ARCH_OMAP2) += irq.o
obj-$(CONFIG_ARCH_OMAP3) += irq.o
obj-$(CONFIG_SOC_AM33XX) += irq.o
# Secure monitor API support
obj-$(CONFIG_ARCH_OMAP3) += omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP4) += omap-smc.o omap-secure.o
obj-$(CONFIG_SOC_OMAP5) += omap-smc.o omap-secure.o
omap-2-3-common = irq.o
hwmod-common = omap_hwmod.o \
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
clkt_dpll.o clkt_clksel.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
endif
obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o
obj-$(CONFIG_SOC_OMAP5) += omap4-common.o omap-wakeupgen.o
omap-4-5-common = omap4-common.o omap-wakeupgen.o \
sleep44xx.o
obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common)
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
......@@ -53,7 +59,6 @@ obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o
# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
# OPP table initialization
ifeq ($(CONFIG_PM_OPP),y)
......@@ -64,15 +69,15 @@ endif
# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o sleep24xx.o
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o
obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o sleep44xx.o
obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
......@@ -84,76 +89,82 @@ endif
endif
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
endif
# PRCM
obj-y += prcm.o prm_common.o
obj-$(CONFIG_ARCH_OMAP2) += cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-y += prcm.o prm_common.o cm_common.o
obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o
omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \
prcm_mpu44xx.o prminst44xx.o \
vc44xx_data.o vp44xx_data.o \
prm44xx.o
vc44xx_data.o vp44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
# OMAP voltage domains
obj-y += voltage.o vc.o vp.o
voltagedomain-common := voltage.o vc.o vp.o
obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common)
obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common)
# OMAP powerdomain framework
obj-y += powerdomain.o powerdomain-common.o
powerdomain-common += powerdomain.o powerdomain-common.o
obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o
obj-$(CONFIG_ARCH_OMAP2) += powerdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += powerdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o
obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common)
obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o
obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common)
# PRCM clockdomain control
obj-y += clockdomain.o
obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o
clockdomain-common += clockdomain.o
obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o
obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common)
obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o
obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common)
# Clock framework
obj-y += clock.o clock_common_data.o \
clkt_dpll.o clkt_clksel.o
obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o clkt2xxx_sys.o
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_sys.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += clock44xx_data.o
obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
obj-$(CONFIG_SOC_AM33XX) += dpll3xxx.o clock33xx_data.o
obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
# OMAP2 clock rate set data (old "OPP" data)
......@@ -161,7 +172,6 @@ obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
# hwmod data
obj-y += omap_hwmod_common_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
......@@ -207,10 +217,10 @@ obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
......
arch/arm/mach-omap2/clkt2xxx_apll.c
View file @ 8634155e
......@@ -25,7 +25,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "cm2xxx_3xxx.h"
#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
......
arch/arm/mach-omap2/clkt2xxx_dpll.c
View file @ 8634155e
......@@ -15,7 +15,7 @@
#include <linux/io.h>
#include "clock.h"
#include "cm2xxx_3xxx.h"
#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
/* Private functions */
......
arch/arm/mach-omap2/clock.c
View file @ 8634155e
......@@ -33,7 +33,8 @@
#include "soc.h"
#include "clockdomain.h"
#include "clock.h"
#include "cm2xxx_3xxx.h"
#include "cm2xxx.h"
#include "cm3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
......
arch/arm/mach-omap2/clock2420_data.c
View file @ 8634155e
......@@ -23,7 +23,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "cm2xxx_3xxx.h"
#include "cm2xxx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
......
arch/arm/mach-omap2/clock2430.c
View file @ 8634155e
......@@ -25,7 +25,7 @@
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "cm2xxx_3xxx.h"
#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
/**
......
arch/arm/mach-omap2/clock2430_data.c
View file @ 8634155e
......@@ -22,7 +22,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "cm2xxx_3xxx.h"
#include "cm2xxx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
......
arch/arm/mach-omap2/clock34xx.c
View file @ 8634155e
......@@ -23,7 +23,7 @@
#include "clock.h"
#include "clock34xx.h"
#include "cm2xxx_3xxx.h"
#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
/**
......
arch/arm/mach-omap2/clock3517.c
View file @ 8634155e
......@@ -23,7 +23,7 @@
#include "clock.h"
#include "clock3517.h"
#include "cm2xxx_3xxx.h"
#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
/*
......
arch/arm/mach-omap2/clock3xxx_data.c
View file @ 8634155e
......@@ -28,7 +28,7 @@
#include "clock34xx.h"
#include "clock36xx.h"
#include "clock3517.h"
#include "cm2xxx_3xxx.h"
#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
......
arch/arm/mach-omap2/clockdomain2xxx_3xxx.c deleted 100644 → 0
View file @ 6d02643d
/*
* OMAP2 and OMAP3 clockdomain control
*
* Copyright (C) 2008-2010 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
*
* Derived from mach-omap2/clockdomain.c written by Paul Walmsley
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <plat/prcm.h>
#include "soc.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-24xx.h"
#include "clockdomain.h"
static int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
return 0;
}
static int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
return 0;
}
static int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
PM_WKDEP, (1 << clkdm2->dep_bit));
}
static int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
{
struct clkdm_dep *cd;
u32 mask = 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
/* PRM accesses are slow, so minimize them */
mask |= 1 << cd->clkdm->dep_bit;
atomic_set(&cd->wkdep_usecount, 0);
}
omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
PM_WKDEP);
return 0;
}
static int omap3_clkdm_add_sleepdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
clkdm1->pwrdm.ptr->prcm_offs,
OMAP3430_CM_SLEEPDEP);
return 0;
}
static int omap3_clkdm_del_sleepdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
clkdm1->pwrdm.ptr->prcm_offs,
OMAP3430_CM_SLEEPDEP);
return 0;
}
static int omap3_clkdm_read_sleepdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
OMAP3430_CM_SLEEPDEP, (1 << clkdm2->dep_bit));
}
static int omap3_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
{
struct clkdm_dep *cd;
u32 mask = 0;
for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
/* PRM accesses are slow, so minimize them */
mask |= 1 << cd->clkdm->dep_bit;
atomic_set(&cd->sleepdep_usecount, 0);
}
omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
OMAP3430_CM_SLEEPDEP);
return 0;
}
static int omap2_clkdm_sleep(struct clockdomain *clkdm)
{
omap2_cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
clkdm->pwrdm.ptr->prcm_offs,
OMAP2_PM_PWSTCTRL);
return 0;
}
static int omap2_clkdm_wakeup(struct clockdomain *clkdm)
{
omap2_cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
clkdm->pwrdm.ptr->prcm_offs,
OMAP2_PM_PWSTCTRL);
return 0;
}
static void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
{
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_add_autodeps(clkdm);
omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
}
static void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
{
omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_del_autodeps(clkdm);
}
static void _enable_hwsup(struct clockdomain *clkdm)
{
if (cpu_is_omap24xx())
omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
else if (cpu_is_omap34xx())
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
}
static void _disable_hwsup(struct clockdomain *clkdm)
{
if (cpu_is_omap24xx())
omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
else if (cpu_is_omap34xx())
omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
}
static int omap3_clkdm_sleep(struct clockdomain *clkdm)
{
omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
return 0;
}
static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
{
omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
return 0;
}
static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->clktrctrl_mask)
return 0;
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
_disable_hwsup(clkdm);
_clkdm_add_autodeps(clkdm);
_enable_hwsup(clkdm);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
omap2_clkdm_wakeup(clkdm);
}
return 0;
}
static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->clktrctrl_mask)
return 0;
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
_disable_hwsup(clkdm);
_clkdm_del_autodeps(clkdm);
_enable_hwsup(clkdm);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
omap2_clkdm_sleep(clkdm);
}
return 0;
}
static void omap3_clkdm_allow_idle(struct clockdomain *clkdm)
{
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_add_autodeps(clkdm);
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
}
static void omap3_clkdm_deny_idle(struct clockdomain *clkdm)
{
omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_del_autodeps(clkdm);
}
static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->clktrctrl_mask)
return 0;
/*
* The CLKDM_MISSING_IDLE_REPORTING flag documentation has
* more details on the unpleasant problem this is working
* around
*/
if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
omap3_clkdm_wakeup(clkdm);
return 0;
}
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
_disable_hwsup(clkdm);
_clkdm_add_autodeps(clkdm);
_enable_hwsup(clkdm);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
omap3_clkdm_wakeup(clkdm);
}
return 0;
}
static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->clktrctrl_mask)
return 0;
/*
* The CLKDM_MISSING_IDLE_REPORTING flag documentation has
* more details on the unpleasant problem this is working
* around
*/
if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
_enable_hwsup(clkdm);
return 0;
}
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
_disable_hwsup(clkdm);
_clkdm_del_autodeps(clkdm);
_enable_hwsup(clkdm);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
omap3_clkdm_sleep(clkdm);
}
return 0;
}
struct clkdm_ops omap2_clkdm_operations = {
.clkdm_add_wkdep = omap2_clkdm_add_wkdep,
.clkdm_del_wkdep = omap2_clkdm_del_wkdep,
.clkdm_read_wkdep = omap2_clkdm_read_wkdep,
.clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
.clkdm_sleep = omap2_clkdm_sleep,
.clkdm_wakeup = omap2_clkdm_wakeup,
.clkdm_allow_idle = omap2_clkdm_allow_idle,
.clkdm_deny_idle = omap2_clkdm_deny_idle,
.clkdm_clk_enable = omap2_clkdm_clk_enable,
.clkdm_clk_disable = omap2_clkdm_clk_disable,
};
struct clkdm_ops omap3_clkdm_operations = {
.clkdm_add_wkdep = omap2_clkdm_add_wkdep,
.clkdm_del_wkdep = omap2_clkdm_del_wkdep,
.clkdm_read_wkdep = omap2_clkdm_read_wkdep,
.clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
.clkdm_add_sleepdep = omap3_clkdm_add_sleepdep,
.clkdm_del_sleepdep = omap3_clkdm_del_sleepdep,
.clkdm_read_sleepdep = omap3_clkdm_read_sleepdep,
.clkdm_clear_all_sleepdeps = omap3_clkdm_clear_all_sleepdeps,
.clkdm_sleep = omap3_clkdm_sleep,
.clkdm_wakeup = omap3_clkdm_wakeup,
.clkdm_allow_idle = omap3_clkdm_allow_idle,
.clkdm_deny_idle = omap3_clkdm_deny_idle,
.clkdm_clk_enable = omap3xxx_clkdm_clk_enable,
.clkdm_clk_disable = omap3xxx_clkdm_clk_disable,
};
arch/arm/mach-omap2/clockdomain33xx.c deleted 100644 → 0
View file @ 6d02643d
/*
* AM33XX clockdomain control
*
* Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
* Vaibhav Hiremath <hvaibhav@ti.com>
*
* Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include "clockdomain.h"
#include "cm33xx.h"
static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
{
am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
return 0;
}
static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
{
am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
return 0;
}
static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
{
am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
}
static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
{
am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
}
static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
{
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
return am33xx_clkdm_wakeup(clkdm);
return 0;
}
static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
{
bool hwsup = false;
hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
am33xx_clkdm_sleep(clkdm);
return 0;
}
struct clkdm_ops am33xx_clkdm_operations = {
.clkdm_sleep = am33xx_clkdm_sleep,
.clkdm_wakeup = am33xx_clkdm_wakeup,
.clkdm_allow_idle = am33xx_clkdm_allow_idle,
.clkdm_deny_idle = am33xx_clkdm_deny_idle,
.clkdm_clk_enable = am33xx_clkdm_clk_enable,
.clkdm_clk_disable = am33xx_clkdm_clk_disable,
};
arch/arm/mach-omap2/clockdomain44xx.c deleted 100644 → 0
View file @ 6d02643d
/*
* OMAP4 clockdomain control
*
* Copyright (C) 2008-2010 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
*
* Derived from mach-omap2/clockdomain.c written by Paul Walmsley
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include "clockdomain.h"
#include "cminst44xx.h"
#include "cm44xx.h"
static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit),
clkdm1->prcm_partition,
clkdm1->cm_inst, clkdm1->clkdm_offs +
OMAP4_CM_STATICDEP);
return 0;
}
static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit),
clkdm1->prcm_partition,
clkdm1->cm_inst, clkdm1->clkdm_offs +
OMAP4_CM_STATICDEP);
return 0;
}
static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition,
clkdm1->cm_inst, clkdm1->clkdm_offs +
OMAP4_CM_STATICDEP,
(1 << clkdm2->dep_bit));
}
static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
{
struct clkdm_dep *cd;
u32 mask = 0;
if (!clkdm->prcm_partition)
return 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
mask |= 1 << cd->clkdm->dep_bit;
atomic_set(&cd->wkdep_usecount, 0);
}
omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs +
OMAP4_CM_STATICDEP);
return 0;
}
static int omap4_clkdm_sleep(struct clockdomain *clkdm)
{
omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
return 0;
}
static int omap4_clkdm_wakeup(struct clockdomain *clkdm)
{
omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
return 0;
}
static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
{
omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
}
static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
{
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
omap4_clkdm_wakeup(clkdm);
else
omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst,
clkdm->clkdm_offs);
}
static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
{
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
return omap4_clkdm_wakeup(clkdm);
return 0;
}
static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->prcm_partition)
return 0;
/*
* The CLKDM_MISSING_IDLE_REPORTING flag documentation has
* more details on the unpleasant problem this is working
* around
*/
if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
omap4_clkdm_allow_idle(clkdm);
return 0;
}
hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
omap4_clkdm_sleep(clkdm);
return 0;
}
struct clkdm_ops omap4_clkdm_operations = {
.clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep,
.clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep,
.clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep,
.clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
.clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep,
.clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep,
.clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep,
.clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
.clkdm_sleep = omap4_clkdm_sleep,
.clkdm_wakeup = omap4_clkdm_wakeup,
.clkdm_allow_idle = omap4_clkdm_allow_idle,
.clkdm_deny_idle = omap4_clkdm_deny_idle,
.clkdm_clk_enable = omap4_clkdm_clk_enable,
.clkdm_clk_disable = omap4_clkdm_clk_disable,
};
arch/arm/mach-omap2/cm.h
View file @ 8634155e
......@@ -33,4 +33,16 @@
*/
#define MAX_MODULE_DISABLE_TIME 5000
# ifndef __ASSEMBLER__
/**
* struct cm_ll_data - fn ptrs to per-SoC CM function implementations
*/
struct cm_ll_data {};
extern int cm_register(struct cm_ll_data *cld);
extern int cm_unregister(struct cm_ll_data *cld);
# endif
#endif
arch/arm/mach-omap2/cm2xxx.c 0 → 100644
View file @ 8634155e
/*
* OMAP2xxx CM module functions
*
* Copyright (C) 2009 Nokia Corporation
* Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
* Paul Walmsley
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "prm2xxx.h"
#include "cm.h"
#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
#include "clockdomain.h"
/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
#define DPLL_AUTOIDLE_DISABLE 0x0
#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3
/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0
#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
static const u8 omap2xxx_cm_idlest_offs[] = {
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
};
/*
*
*/
static void _write_clktrctrl(u8 c, s16 module, u32 mask)
{
u32 v;
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
v &= ~mask;
v |= c << __ffs(mask);
omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
}
bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
{
u32 v;
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
v &= mask;
v >>= __ffs(mask);
return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
}
void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
}
void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
}
/*
* DPLL autoidle control
*/
static void _omap2xxx_set_dpll_autoidle(u8 m)
{
u32 v;
v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
v &= ~OMAP24XX_AUTO_DPLL_MASK;
v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
}
void omap2xxx_cm_set_dpll_disable_autoidle(void)
{
_omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
}
void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
{
_omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
}
/*
* APLL autoidle control
*/
static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
{
u32 v;
v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
v &= ~mask;
v |= m << __ffs(mask);
omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
}
void omap2xxx_cm_set_apll54_disable_autoidle(void)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
OMAP24XX_AUTO_54M_MASK);
}
void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
OMAP24XX_AUTO_54M_MASK);
}
void omap2xxx_cm_set_apll96_disable_autoidle(void)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
OMAP24XX_AUTO_96M_MASK);
}
void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
OMAP24XX_AUTO_96M_MASK);
}
/*
*
*/
/**
* omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
* @prcm_mod: PRCM module offset
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
*
* Wait for the PRCM to indicate that the module identified by
* (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
* success or -EBUSY if the module doesn't enable in time.
*/
int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
{
int ena = 0, i = 0;
u8 cm_idlest_reg;
u32 mask;
if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs)))
return -EINVAL;
cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1];
mask = 1 << idlest_shift;
ena = mask;
omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
mask) == ena), MAX_MODULE_READY_TIME, i);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}
/* Clockdomain low-level functions */
static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm)
{
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_add_autodeps(clkdm);
omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
}
static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm)
{
omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_del_autodeps(clkdm);
}
static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->clktrctrl_mask)
return 0;
hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
_clkdm_add_autodeps(clkdm);
omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
omap2xxx_clkdm_wakeup(clkdm);
}
return 0;
}
static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->clktrctrl_mask)
return 0;
hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
_clkdm_del_autodeps(clkdm);
omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
omap2xxx_clkdm_sleep(clkdm);
}
return 0;
}
struct clkdm_ops omap2_clkdm_operations = {
.clkdm_add_wkdep = omap2_clkdm_add_wkdep,
.clkdm_del_wkdep = omap2_clkdm_del_wkdep,
.clkdm_read_wkdep = omap2_clkdm_read_wkdep,
.clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
.clkdm_sleep = omap2xxx_clkdm_sleep,
.clkdm_wakeup = omap2xxx_clkdm_wakeup,
.clkdm_allow_idle = omap2xxx_clkdm_allow_idle,
.clkdm_deny_idle = omap2xxx_clkdm_deny_idle,
.clkdm_clk_enable = omap2xxx_clkdm_clk_enable,
.clkdm_clk_disable = omap2xxx_clkdm_clk_disable,
};
arch/arm/mach-omap2/cm2xxx.h 0 → 100644
View file @ 8634155e
/*
* OMAP2xxx Clock Management (CM) register definitions
*
* Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
* Copyright (C) 2007-2010 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The CM hardware modules on the OMAP2/3 are quite similar to each
* other. The CM modules/instances on OMAP4 are quite different, so
* they are handled in a separate file.
*/
#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_H
#define __ARCH_ASM_MACH_OMAP2_CM2XXX_H
#include "prcm-common.h"
#include "cm2xxx_3xxx.h"
#define OMAP2420_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
#define OMAP2430_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
/*
* Module specific CM register offsets from CM_BASE + domain offset
* Use cm_{read,write}_mod_reg() with these registers.
* These register offsets generally appear in more than one PRCM submodule.
*/
/* OMAP2-specific register offsets */
#define OMAP24XX_CM_FCLKEN2 0x0004
#define OMAP24XX_CM_ICLKEN4 0x001c
#define OMAP24XX_CM_AUTOIDLE4 0x003c
#define OMAP24XX_CM_IDLEST4 0x002c
/* CM_IDLEST bit field values to indicate deasserted IdleReq */
#define OMAP24XX_CM_IDLEST_VAL 0
/* Clock management domain register get/set */
#ifndef __ASSEMBLER__
extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
extern bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
u8 idlest_shift);
#endif
#endif
arch/arm/mach-omap2/cm2xxx_3xxx.h
View file @ 8634155e
......@@ -18,27 +18,6 @@
#include "prcm-common.h"
#define OMAP2420_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
#define OMAP2430_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
#define OMAP34XX_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
/*
* OMAP3-specific global CM registers
* Use cm_{read,write}_reg() with these registers.
* These registers appear once per CM module.
*/
#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
* Module specific CM register offsets from CM_BASE + domain offset
* Use cm_{read,write}_mod_reg() with these registers.
......@@ -57,6 +36,7 @@
#define CM_IDLEST 0x0020
#define CM_IDLEST1 CM_IDLEST
#define CM_IDLEST2 0x0024
#define OMAP2430_CM_IDLEST3 0x0028
#define CM_AUTOIDLE 0x0030
#define CM_AUTOIDLE1 CM_AUTOIDLE
#define CM_AUTOIDLE2 0x0034
......@@ -66,70 +46,55 @@
#define CM_CLKSEL2 0x0044
#define OMAP2_CM_CLKSTCTRL 0x0048
/* OMAP2-specific register offsets */
#define OMAP24XX_CM_FCLKEN2 0x0004
#define OMAP24XX_CM_ICLKEN4 0x001c
#define OMAP24XX_CM_AUTOIDLE4 0x003c
#define OMAP24XX_CM_IDLEST4 0x002c
#define OMAP2430_CM_IDLEST3 0x0028
/* OMAP3-specific register offsets */
#define OMAP3430_CM_CLKEN_PLL 0x0004
#define OMAP3430ES2_CM_CLKEN2 0x0004
#define OMAP3430ES2_CM_FCLKEN3 0x0008
#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL
#define OMAP3430_CM_CLKSTST 0x004c
#define OMAP3430ES2_CM_CLKSEL4 0x004c
#define OMAP3430ES2_CM_CLKSEL5 0x0050
#define OMAP3430_CM_CLKSEL2_EMU 0x0050
#define OMAP3430_CM_CLKSEL3_EMU 0x0054
#ifndef __ASSEMBLER__
/* CM_IDLEST bit field values to indicate deasserted IdleReq */
#include <linux/io.h>
#define OMAP24XX_CM_IDLEST_VAL 0
#define OMAP34XX_CM_IDLEST_VAL 1
static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
{
return __raw_readl(cm_base + module + idx);
}
static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
{
__raw_writel(val, cm_base + module + idx);
}
/* Clock management domain register get/set */
/* Read-modify-write a register in a CM module. Caller must lock */
static inline u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module,
s16 idx)
{
u32 v;
#ifndef __ASSEMBLER__
v = omap2_cm_read_mod_reg(module, idx);
v &= ~mask;
v |= bits;
omap2_cm_write_mod_reg(v, module, idx);
extern u32 omap2_cm_read_mod_reg(s16 module, u16 idx);
extern void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx);
extern u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
return v;
}
extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
u8 idlest_shift);
extern u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
extern u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
/* Read a CM register, AND it, and shift the result down to bit 0 */
static inline u32 omap2_cm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
{
u32 v;
extern bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
v = omap2_cm_read_mod_reg(domain, idx);
v &= mask;
v >>= __ffs(mask);
extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
return v;
}
extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
static inline u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx);
}
extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
static inline u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
}
#endif
......@@ -147,10 +112,4 @@ extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
#define OMAP_ST_GFX_MASK (1 << 0)
/* Function prototypes */
# ifndef __ASSEMBLER__
extern void omap3_cm_save_context(void);
extern void omap3_cm_restore_context(void);
# endif
#endif
arch/arm/mach-omap2/cm33xx.c
View file @ 8634155e
......@@ -24,6 +24,7 @@
#include "../plat-omap/common.h"
#include "clockdomain.h"
#include "cm.h"
#include "cm33xx.h"
#include "cm-regbits-34xx.h"
......@@ -311,3 +312,58 @@ void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs)
v &= ~AM33XX_MODULEMODE_MASK;
am33xx_cm_write_reg(v, inst, clkctrl_offs);
}
/*
* Clockdomain low-level functions
*/
static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
{
am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
return 0;
}
static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
{
am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
return 0;
}
static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
{
am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
}
static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
{
am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
}
static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
{
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
return am33xx_clkdm_wakeup(clkdm);
return 0;
}
static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
{
bool hwsup = false;
hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
am33xx_clkdm_sleep(clkdm);
return 0;
}
struct clkdm_ops am33xx_clkdm_operations = {
.clkdm_sleep = am33xx_clkdm_sleep,
.clkdm_wakeup = am33xx_clkdm_wakeup,
.clkdm_allow_idle = am33xx_clkdm_allow_idle,
.clkdm_deny_idle = am33xx_clkdm_deny_idle,
.clkdm_clk_enable = am33xx_clkdm_clk_enable,
.clkdm_clk_disable = am33xx_clkdm_clk_disable,
};
arch/arm/mach-omap2/cm2xxx_3xxx.c → arch/arm/mach-omap2/cm3xxx.c
View file @ 8634155e
/*
* OMAP2/3 CM module functions
* OMAP3xxx CM module functions
*
* Copyright (C) 2009 Nokia Corporation
* Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
* Paul Walmsley
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -12,8 +14,6 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
......@@ -21,56 +21,16 @@
#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "prm2xxx_3xxx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
#include "clockdomain.h"
/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
#define DPLL_AUTOIDLE_DISABLE 0x0
#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3
/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0
#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
static const u8 cm_idlest_offs[] = {
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
static const u8 omap3xxx_cm_idlest_offs[] = {
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
};
u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
{
return __raw_readl(cm_base + module + idx);
}
void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
{
__raw_writel(val, cm_base + module + idx);
}
/* Read-modify-write a register in a CM module. Caller must lock */
u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
{
u32 v;
v = omap2_cm_read_mod_reg(module, idx);
v &= ~mask;
v |= bits;
omap2_cm_write_mod_reg(v, module, idx);
return v;
}
u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx);
}
u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
}
/*
*
*/
......@@ -85,33 +45,15 @@ static void _write_clktrctrl(u8 c, s16 module, u32 mask)
omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
}
bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
{
u32 v;
bool ret = 0;
BUG_ON(!cpu_is_omap24xx() && !cpu_is_omap34xx());
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
v &= mask;
v >>= __ffs(mask);
if (cpu_is_omap24xx())
ret = (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
else
ret = (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
return ret;
}
void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
}
void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
}
void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
......@@ -135,109 +77,209 @@ void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
}
/*
* DPLL autoidle control
*
*/
static void _omap2xxx_set_dpll_autoidle(u8 m)
/**
* omap3xxx_cm_wait_module_ready - wait for a module to leave idle or standby
* @prcm_mod: PRCM module offset
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
*
* Wait for the PRCM to indicate that the module identified by
* (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
* success or -EBUSY if the module doesn't enable in time.
*/
int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
{
u32 v;
int ena = 0, i = 0;
u8 cm_idlest_reg;
u32 mask;
if (!idlest_id || (idlest_id > ARRAY_SIZE(omap3xxx_cm_idlest_offs)))
return -EINVAL;
cm_idlest_reg = omap3xxx_cm_idlest_offs[idlest_id - 1];
mask = 1 << idlest_shift;
ena = 0;
omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
mask) == ena), MAX_MODULE_READY_TIME, i);
v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
v &= ~OMAP24XX_AUTO_DPLL_MASK;
v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}
void omap2xxx_cm_set_dpll_disable_autoidle(void)
/* Clockdomain low-level operations */
static int omap3xxx_clkdm_add_sleepdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
_omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
clkdm1->pwrdm.ptr->prcm_offs,
OMAP3430_CM_SLEEPDEP);
return 0;
}
void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
static int omap3xxx_clkdm_del_sleepdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
_omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
clkdm1->pwrdm.ptr->prcm_offs,
OMAP3430_CM_SLEEPDEP);
return 0;
}
/*
* APLL autoidle control
*/
static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
static int omap3xxx_clkdm_read_sleepdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
u32 v;
v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
v &= ~mask;
v |= m << __ffs(mask);
omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
return omap2_cm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
OMAP3430_CM_SLEEPDEP,
(1 << clkdm2->dep_bit));
}
void omap2xxx_cm_set_apll54_disable_autoidle(void)
static int omap3xxx_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
OMAP24XX_AUTO_54M_MASK);
struct clkdm_dep *cd;
u32 mask = 0;
for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
mask |= 1 << cd->clkdm->dep_bit;
atomic_set(&cd->sleepdep_usecount, 0);
}
omap2_cm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
OMAP3430_CM_SLEEPDEP);
return 0;
}
void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
static int omap3xxx_clkdm_sleep(struct clockdomain *clkdm)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
OMAP24XX_AUTO_54M_MASK);
omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
return 0;
}
void omap2xxx_cm_set_apll96_disable_autoidle(void)
static int omap3xxx_clkdm_wakeup(struct clockdomain *clkdm)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
OMAP24XX_AUTO_96M_MASK);
omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
return 0;
}
void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
static void omap3xxx_clkdm_allow_idle(struct clockdomain *clkdm)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
OMAP24XX_AUTO_96M_MASK);
}
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_add_autodeps(clkdm);
/*
*
*/
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
}
/**
* omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
* @prcm_mod: PRCM module offset
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
*
* XXX document
*/
int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
static void omap3xxx_clkdm_deny_idle(struct clockdomain *clkdm)
{
int ena = 0, i = 0;
u8 cm_idlest_reg;
u32 mask;
omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
return -EINVAL;
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_del_autodeps(clkdm);
}
cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
{
bool hwsup = false;
mask = 1 << idlest_shift;
if (!clkdm->clktrctrl_mask)
return 0;
if (cpu_is_omap24xx())
ena = mask;
else if (cpu_is_omap34xx())
ena = 0;
else
BUG();
/*
* The CLKDM_MISSING_IDLE_REPORTING flag documentation has
* more details on the unpleasant problem this is working
* around
*/
if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
omap3xxx_clkdm_wakeup(clkdm);
return 0;
}
hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
_clkdm_add_autodeps(clkdm);
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
omap3xxx_clkdm_wakeup(clkdm);
}
return 0;
}
omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
MAX_MODULE_READY_TIME, i);
static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
{
bool hwsup = false;
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
if (!clkdm->clktrctrl_mask)
return 0;
/*
* The CLKDM_MISSING_IDLE_REPORTING flag documentation has
* more details on the unpleasant problem this is working
* around
*/
if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
return 0;
}
hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
_clkdm_del_autodeps(clkdm);
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
omap3xxx_clkdm_sleep(clkdm);
}
return 0;
}
struct clkdm_ops omap3_clkdm_operations = {
.clkdm_add_wkdep = omap2_clkdm_add_wkdep,
.clkdm_del_wkdep = omap2_clkdm_del_wkdep,
.clkdm_read_wkdep = omap2_clkdm_read_wkdep,
.clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
.clkdm_add_sleepdep = omap3xxx_clkdm_add_sleepdep,
.clkdm_del_sleepdep = omap3xxx_clkdm_del_sleepdep,
.clkdm_read_sleepdep = omap3xxx_clkdm_read_sleepdep,
.clkdm_clear_all_sleepdeps = omap3xxx_clkdm_clear_all_sleepdeps,
.clkdm_sleep = omap3xxx_clkdm_sleep,
.clkdm_wakeup = omap3xxx_clkdm_wakeup,
.clkdm_allow_idle = omap3xxx_clkdm_allow_idle,
.clkdm_deny_idle = omap3xxx_clkdm_deny_idle,
.clkdm_clk_enable = omap3xxx_clkdm_clk_enable,
.clkdm_clk_disable = omap3xxx_clkdm_clk_disable,
};
/*
* Context save/restore code - OMAP3 only
*/
#ifdef CONFIG_ARCH_OMAP3
struct omap3_cm_regs {
u32 iva2_cm_clksel1;
u32 iva2_cm_clksel2;
......@@ -555,4 +597,3 @@ void omap3_cm_restore_context(void)
omap2_cm_write_mod_reg(cm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD,
OMAP3_CM_CLKOUT_CTRL_OFFSET);
}
#endif
arch/arm/mach-omap2/cm3xxx.h 0 → 100644
View file @ 8634155e
/*
* OMAP2/3 Clock Management (CM) register definitions
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2007-2010 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The CM hardware modules on the OMAP2/3 are quite similar to each
* other. The CM modules/instances on OMAP4 are quite different, so
* they are handled in a separate file.
*/
#ifndef __ARCH_ASM_MACH_OMAP2_CM3XXX_H
#define __ARCH_ASM_MACH_OMAP2_CM3XXX_H
#include "prcm-common.h"
#include "cm2xxx_3xxx.h"
#define OMAP34XX_CM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
/*
* OMAP3-specific global CM registers
* Use cm_{read,write}_reg() with these registers.
* These registers appear once per CM module.
*/
#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
* Module specific CM register offsets from CM_BASE + domain offset
* Use cm_{read,write}_mod_reg() with these registers.
* These register offsets generally appear in more than one PRCM submodule.
*/
/* OMAP3-specific register offsets */
#define OMAP3430_CM_CLKEN_PLL 0x0004
#define OMAP3430ES2_CM_CLKEN2 0x0004
#define OMAP3430ES2_CM_FCLKEN3 0x0008
#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL
#define OMAP3430_CM_CLKSTST 0x004c
#define OMAP3430ES2_CM_CLKSEL4 0x004c
#define OMAP3430ES2_CM_CLKSEL5 0x0050
#define OMAP3430_CM_CLKSEL2_EMU 0x0050
#define OMAP3430_CM_CLKSEL3_EMU 0x0054
/* CM_IDLEST bit field values to indicate deasserted IdleReq */
#define OMAP34XX_CM_IDLEST_VAL 1
#ifndef __ASSEMBLER__
extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
extern bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
extern int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
u8 idlest_shift);
extern void omap3_cm_save_context(void);
extern void omap3_cm_restore_context(void);
#endif
#endif
arch/arm/mach-omap2/cm_common.c 0 → 100644
View file @ 8634155e
/*
* OMAP2+ common Clock Management (CM) IP block functions
*
* Copyright (C) 2012 Texas Instruments, Inc.
* Paul Walmsley <paul@pwsan.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* XXX This code should eventually be moved to a CM driver.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include "cm2xxx.h"
#include "cm3xxx.h"
#include "cm44xx.h"
/*
* cm_ll_data: function pointers to SoC-specific implementations of
* common CM functions
*/
static struct cm_ll_data null_cm_ll_data;
static struct cm_ll_data *cm_ll_data = &null_cm_ll_data;
/**
* cm_register - register per-SoC low-level data with the CM
* @cld: low-level per-SoC OMAP CM data & function pointers to register
*
* Register per-SoC low-level OMAP CM data and function pointers with
* the OMAP CM common interface. The caller must keep the data
* pointed to by @cld valid until it calls cm_unregister() and
* it returns successfully. Returns 0 upon success, -EINVAL if @cld
* is NULL, or -EEXIST if cm_register() has already been called
* without an intervening cm_unregister().
*/
int cm_register(struct cm_ll_data *cld)
{
if (!cld)
return -EINVAL;
if (cm_ll_data != &null_cm_ll_data)
return -EEXIST;
cm_ll_data = cld;
return 0;
}
/**
* cm_unregister - unregister per-SoC low-level data & function pointers
* @cld: low-level per-SoC OMAP CM data & function pointers to unregister
*
* Unregister per-SoC low-level OMAP CM data and function pointers
* that were previously registered with cm_register(). The
* caller may not destroy any of the data pointed to by @cld until
* this function returns successfully. Returns 0 upon success, or
* -EINVAL if @cld is NULL or if @cld does not match the struct
* cm_ll_data * previously registered by cm_register().
*/
int cm_unregister(struct cm_ll_data *cld)
{
if (!cld || cm_ll_data != cld)
return -EINVAL;
cm_ll_data = &null_cm_ll_data;
return 0;
}
arch/arm/mach-omap2/cminst44xx.c
View file @ 8634155e
......@@ -2,8 +2,9 @@
* OMAP4 CM instance functions
*
* Copyright (C) 2009 Nokia Corporation
* Copyright (C) 2011 Texas Instruments, Inc.
* Copyright (C) 2008-2011 Texas Instruments, Inc.
* Paul Walmsley
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -22,6 +23,7 @@
#include "iomap.h"
#include "common.h"
#include "clockdomain.h"
#include "cm.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
......@@ -343,3 +345,141 @@ void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
v &= ~OMAP4430_MODULEMODE_MASK;
omap4_cminst_write_inst_reg(v, part, inst, clkctrl_offs);
}
/*
* Clockdomain low-level functions
*/
static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit),
clkdm1->prcm_partition,
clkdm1->cm_inst, clkdm1->clkdm_offs +
OMAP4_CM_STATICDEP);
return 0;
}
static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit),
clkdm1->prcm_partition,
clkdm1->cm_inst, clkdm1->clkdm_offs +
OMAP4_CM_STATICDEP);
return 0;
}
static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition,
clkdm1->cm_inst,
clkdm1->clkdm_offs +
OMAP4_CM_STATICDEP,
(1 << clkdm2->dep_bit));
}
static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
{
struct clkdm_dep *cd;
u32 mask = 0;
if (!clkdm->prcm_partition)
return 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
mask |= 1 << cd->clkdm->dep_bit;
atomic_set(&cd->wkdep_usecount, 0);
}
omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs +
OMAP4_CM_STATICDEP);
return 0;
}
static int omap4_clkdm_sleep(struct clockdomain *clkdm)
{
omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
return 0;
}
static int omap4_clkdm_wakeup(struct clockdomain *clkdm)
{
omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
return 0;
}
static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
{
omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
}
static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
{
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
omap4_clkdm_wakeup(clkdm);
else
omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst,
clkdm->clkdm_offs);
}
static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
{
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
return omap4_clkdm_wakeup(clkdm);
return 0;
}
static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->prcm_partition)
return 0;
/*
* The CLKDM_MISSING_IDLE_REPORTING flag documentation has
* more details on the unpleasant problem this is working
* around
*/
if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
omap4_clkdm_allow_idle(clkdm);
return 0;
}
hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
omap4_clkdm_sleep(clkdm);
return 0;
}
struct clkdm_ops omap4_clkdm_operations = {
.clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep,
.clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep,
.clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep,
.clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
.clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep,
.clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep,
.clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep,
.clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
.clkdm_sleep = omap4_clkdm_sleep,
.clkdm_wakeup = omap4_clkdm_wakeup,
.clkdm_allow_idle = omap4_clkdm_allow_idle,
.clkdm_deny_idle = omap4_clkdm_deny_idle,
.clkdm_clk_enable = omap4_clkdm_clk_enable,
.clkdm_clk_disable = omap4_clkdm_clk_disable,
};
arch/arm/mach-omap2/control.c
View file @ 8634155e
......@@ -20,8 +20,8 @@
#include "common.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm3xxx.h"
#include "cm3xxx.h"
#include "sdrc.h"
#include "pm.h"
#include "control.h"
......
arch/arm/mach-omap2/omap_hwmod.c
View file @ 8634155e
......@@ -147,10 +147,11 @@
#include "common.h"
#include "clockdomain.h"
#include "powerdomain.h"
#include "cm2xxx_3xxx.h"
#include "cm2xxx.h"
#include "cm3xxx.h"
#include "cminst44xx.h"
#include "cm33xx.h"
#include "prm2xxx_3xxx.h"
#include "prm3xxx.h"
#include "prm44xx.h"
#include "prm33xx.h"
#include "prminst44xx.h"
......@@ -2668,7 +2669,7 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois)
/* Static functions intended only for use in soc_ops field function pointers */
/**
* _omap2_wait_target_ready - wait for a module to leave slave idle
* _omap2xxx_wait_target_ready - wait for a module to leave slave idle
* @oh: struct omap_hwmod *
*
* Wait for a module @oh to leave slave idle. Returns 0 if the module
......@@ -2676,7 +2677,7 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois)
* slave idle; otherwise, pass along the return value of the
* appropriate *_cm*_wait_module_ready() function.
*/
static int _omap2_wait_target_ready(struct omap_hwmod *oh)
static int _omap2xxx_wait_target_ready(struct omap_hwmod *oh)
{
if (!oh)
return -EINVAL;
......@@ -2689,9 +2690,36 @@ static int _omap2_wait_target_ready(struct omap_hwmod *oh)
/* XXX check module SIDLEMODE, hardreset status, enabled clocks */
return omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
oh->prcm.omap2.idlest_reg_id,
oh->prcm.omap2.idlest_idle_bit);
return omap2xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
oh->prcm.omap2.idlest_reg_id,
oh->prcm.omap2.idlest_idle_bit);
}
/**
* _omap3xxx_wait_target_ready - wait for a module to leave slave idle
* @oh: struct omap_hwmod *
*
* Wait for a module @oh to leave slave idle. Returns 0 if the module
* does not have an IDLEST bit or if the module successfully leaves
* slave idle; otherwise, pass along the return value of the
* appropriate *_cm*_wait_module_ready() function.
*/
static int _omap3xxx_wait_target_ready(struct omap_hwmod *oh)
{
if (!oh)
return -EINVAL;
if (oh->flags & HWMOD_NO_IDLEST)
return 0;
if (!_find_mpu_rt_port(oh))
return 0;
/* XXX check module SIDLEMODE, hardreset status, enabled clocks */
return omap3xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
oh->prcm.omap2.idlest_reg_id,
oh->prcm.omap2.idlest_idle_bit);
}
/**
......@@ -3959,8 +3987,13 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx)
*/
void __init omap_hwmod_init(void)
{
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
soc_ops.wait_target_ready = _omap2_wait_target_ready;
if (cpu_is_omap24xx()) {
soc_ops.wait_target_ready = _omap2xxx_wait_target_ready;
soc_ops.assert_hardreset = _omap2_assert_hardreset;
soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
} else if (cpu_is_omap34xx()) {
soc_ops.wait_target_ready = _omap3xxx_wait_target_ready;
soc_ops.assert_hardreset = _omap2_assert_hardreset;
soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
......
arch/arm/mach-omap2/pm24xx.c
View file @ 8634155e
......@@ -43,9 +43,9 @@
#include "soc.h"
#include "common.h"
#include "clock.h"
#include "prm2xxx_3xxx.h"
#include "prm2xxx.h"
#include "prm-regbits-24xx.h"
#include "cm2xxx_3xxx.h"
#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "pm.h"
......
arch/arm/mach-omap2/pm34xx.c
View file @ 8634155e
......@@ -44,12 +44,11 @@
#include "soc.h"
#include "common.h"
#include "cm2xxx_3xxx.h"
#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
#include "gpmc.h"
#include "prm-regbits-34xx.h"
#include "prm2xxx_3xxx.h"
#include "prm3xxx.h"
#include "pm.h"
#include "sdrc.h"
#include "control.h"
......
arch/arm/mach-omap2/powerdomain2xxx_3xxx.c deleted 100644 → 0
View file @ 6d02643d
/*
* OMAP2 and OMAP3 powerdomain control
*
* Copyright (C) 2009-2011 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Derived from mach-omap2/powerdomain.c written by Paul Walmsley
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/bug.h>
#include <plat/prcm.h>
#include "powerdomain.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-34xx.h"
/* Common functions across OMAP2 and OMAP3 */
static int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
(pwrst << OMAP_POWERSTATE_SHIFT),
pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
return 0;
}
static int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL,
OMAP_POWERSTATE_MASK);
}
static int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTST,
OMAP_POWERSTATEST_MASK);
}
static int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst)
{
u32 m;
m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL);
return 0;
}
static int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst)
{
u32 m;
m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL);
return 0;
}
static int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
u32 m;
m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
m);
}
static int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
{
u32 m;
m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL, m);
}
static int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
{
u32 v;
v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK);
omap2_prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v,
pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
return 0;
}
static int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
{
u32 c = 0;
/*
* REVISIT: pwrdm_wait_transition() may be better implemented
* via a callback and a periodic timer check -- how long do we expect
* powerdomain transitions to take?
*/
/* XXX Is this udelay() value meaningful? */
while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
OMAP_INTRANSITION_MASK) &&
(c++ < PWRDM_TRANSITION_BAILOUT))
udelay(1);
if (c > PWRDM_TRANSITION_BAILOUT) {
pr_err("powerdomain: %s: waited too long to complete transition\n",
pwrdm->name);
return -EAGAIN;
}
pr_debug("powerdomain: completed transition in %d loops\n", c);
return 0;
}
/* Applicable only for OMAP3. Not supported on OMAP2 */
static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP3430_PM_PREPWSTST,
OMAP3430_LASTPOWERSTATEENTERED_MASK);
}
static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTST,
OMAP3430_LOGICSTATEST_MASK);
}
static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL,
OMAP3430_LOGICSTATEST_MASK);
}
static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP3430_PM_PREPWSTST,
OMAP3430_LASTLOGICSTATEENTERED_MASK);
}
static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
{
switch (bank) {
case 0:
return OMAP3430_LASTMEM1STATEENTERED_MASK;
case 1:
return OMAP3430_LASTMEM2STATEENTERED_MASK;
case 2:
return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
case 3:
return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
default:
WARN_ON(1); /* should never happen */
return -EEXIST;
}
return 0;
}
static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
u32 m;
m = omap3_get_mem_bank_lastmemst_mask(bank);
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP3430_PM_PREPWSTST, m);
}
static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
{
omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
return 0;
}
static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
{
return omap2_prm_rmw_mod_reg_bits(0,
1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
}
static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
{
return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
0, pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL);
}
struct pwrdm_ops omap2_pwrdm_operations = {
.pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
.pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
.pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
.pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
.pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
.pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
.pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
.pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
.pwrdm_wait_transition = omap2_pwrdm_wait_transition,
};
struct pwrdm_ops omap3_pwrdm_operations = {
.pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
.pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
.pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
.pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst,
.pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
.pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst,
.pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst,
.pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst,
.pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
.pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
.pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
.pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
.pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst,
.pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst,
.pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar,
.pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar,
.pwrdm_wait_transition = omap2_pwrdm_wait_transition,
};
arch/arm/mach-omap2/powerdomain33xx.c deleted 100644 → 0
View file @ 6d02643d
/*
* AM33XX Powerdomain control
*
* Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
*
* Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak
* <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <plat/prcm.h>
#include "powerdomain.h"
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
(pwrst << OMAP_POWERSTATE_SHIFT),
pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
return 0;
}
static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
v &= OMAP_POWERSTATE_MASK;
v >>= OMAP_POWERSTATE_SHIFT;
return v;
}
static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
v &= OMAP_POWERSTATEST_MASK;
v >>= OMAP_POWERSTATEST_SHIFT;
return v;
}
static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
return v;
}
static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
{
am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
(1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
return 0;
}
static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
{
am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
AM33XX_LASTPOWERSTATEENTERED_MASK,
pwrdm->prcm_offs, pwrdm->pwrstst_offs);
return 0;
}
static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
{
u32 m;
m = pwrdm->logicretstate_mask;
if (!m)
return -EINVAL;
am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
return 0;
}
static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
v &= AM33XX_LOGICSTATEST_MASK;
v >>= AM33XX_LOGICSTATEST_SHIFT;
return v;
}
static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
{
u32 v, m;
m = pwrdm->logicretstate_mask;
if (!m)
return -EINVAL;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
v &= m;
v >>= __ffs(m);
return v;
}
static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst)
{
u32 m;
m = pwrdm->mem_on_mask[bank];
if (!m)
return -EINVAL;
am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
return 0;
}
static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst)
{
u32 m;
m = pwrdm->mem_ret_mask[bank];
if (!m)
return -EINVAL;
am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
return 0;
}
static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
u32 m, v;
m = pwrdm->mem_pwrst_mask[bank];
if (!m)
return -EINVAL;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
v &= m;
v >>= __ffs(m);
return v;
}
static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
{
u32 m, v;
m = pwrdm->mem_retst_mask[bank];
if (!m)
return -EINVAL;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
v &= m;
v >>= __ffs(m);
return v;
}
static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
{
u32 c = 0;
/*
* REVISIT: pwrdm_wait_transition() may be better implemented
* via a callback and a periodic timer check -- how long do we expect
* powerdomain transitions to take?
*/
/* XXX Is this udelay() value meaningful? */
while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
& OMAP_INTRANSITION_MASK) &&
(c++ < PWRDM_TRANSITION_BAILOUT))
udelay(1);
if (c > PWRDM_TRANSITION_BAILOUT) {
pr_err("powerdomain: %s: waited too long to complete transition\n",
pwrdm->name);
return -EAGAIN;
}
pr_debug("powerdomain: completed transition in %d loops\n", c);
return 0;
}
struct pwrdm_ops am33xx_pwrdm_operations = {
.pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst,
.pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst,
.pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst,
.pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst,
.pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst,
.pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst,
.pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst,
.pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst,
.pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange,
.pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst,
.pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst,
.pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst,
.pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst,
.pwrdm_wait_transition = am33xx_pwrdm_wait_transition,
};
arch/arm/mach-omap2/powerdomain44xx.c deleted 100644 → 0
View file @ 6d02643d
/*
* OMAP4 powerdomain control
*
* Copyright (C) 2009-2010, 2012 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Derived from mach-omap2/powerdomain.c written by Paul Walmsley
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/bug.h>
#include "powerdomain.h"
#include <plat/prcm.h>
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include "prminst44xx.h"
#include "prm-regbits-44xx.h"
static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK,
(pwrst << OMAP_POWERSTATE_SHIFT),
pwrdm->prcm_partition,
pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
return 0;
}
static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTCTRL);
v &= OMAP_POWERSTATE_MASK;
v >>= OMAP_POWERSTATE_SHIFT;
return v;
}
static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTST);
v &= OMAP_POWERSTATEST_MASK;
v >>= OMAP_POWERSTATEST_SHIFT;
return v;
}
static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTST);
v &= OMAP4430_LASTPOWERSTATEENTERED_MASK;
v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT;
return v;
}
static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
{
omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
(1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
pwrdm->prcm_partition,
pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
return 0;
}
static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
{
omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK,
OMAP4430_LASTPOWERSTATEENTERED_MASK,
pwrdm->prcm_partition,
pwrdm->prcm_offs, OMAP4_PM_PWSTST);
return 0;
}
static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
{
u32 v;
v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK);
omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v,
pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTCTRL);
return 0;
}
static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst)
{
u32 m;
m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTCTRL);
return 0;
}
static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst)
{
u32 m;
m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTCTRL);
return 0;
}
static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTST);
v &= OMAP4430_LOGICSTATEST_MASK;
v >>= OMAP4430_LOGICSTATEST_SHIFT;
return v;
}
static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
{
u32 v;
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTCTRL);
v &= OMAP4430_LOGICRETSTATE_MASK;
v >>= OMAP4430_LOGICRETSTATE_SHIFT;
return v;
}
/**
* omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate
* @pwrdm: struct powerdomain * to read the state for
*
* Reads the previous logic powerstate for a powerdomain. This
* function must determine the previous logic powerstate by first
* checking the previous powerstate for the domain. If that was OFF,
* then logic has been lost. If previous state was RETENTION, the
* function reads the setting for the next retention logic state to
* see the actual value. In every other case, the logic is
* retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
* depending whether the logic was retained or not.
*/
static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
{
int state;
state = omap4_pwrdm_read_prev_pwrst(pwrdm);
if (state == PWRDM_POWER_OFF)
return PWRDM_POWER_OFF;
if (state != PWRDM_POWER_RET)
return PWRDM_POWER_RET;
return omap4_pwrdm_read_logic_retst(pwrdm);
}
static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
u32 m, v;
m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTST);
v &= m;
v >>= __ffs(m);
return v;
}
static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
{
u32 m, v;
m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTCTRL);
v &= m;
v >>= __ffs(m);
return v;
}
/**
* omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate
* @pwrdm: struct powerdomain * to read mem powerstate for
* @bank: memory bank index
*
* Reads the previous memory powerstate for a powerdomain. This
* function must determine the previous memory powerstate by first
* checking the previous powerstate for the domain. If that was OFF,
* then logic has been lost. If previous state was RETENTION, the
* function reads the setting for the next memory retention state to
* see the actual value. In every other case, the logic is
* retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
* depending whether logic was retained or not.
*/
static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
int state;
state = omap4_pwrdm_read_prev_pwrst(pwrdm);
if (state == PWRDM_POWER_OFF)
return PWRDM_POWER_OFF;
if (state != PWRDM_POWER_RET)
return PWRDM_POWER_RET;
return omap4_pwrdm_read_mem_retst(pwrdm, bank);
}
static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
{
u32 c = 0;
/*
* REVISIT: pwrdm_wait_transition() may be better implemented
* via a callback and a periodic timer check -- how long do we expect
* powerdomain transitions to take?
*/
/* XXX Is this udelay() value meaningful? */
while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition,
pwrdm->prcm_offs,
OMAP4_PM_PWSTST) &
OMAP_INTRANSITION_MASK) &&
(c++ < PWRDM_TRANSITION_BAILOUT))
udelay(1);
if (c > PWRDM_TRANSITION_BAILOUT) {
pr_err("powerdomain: %s: waited too long to complete transition\n",
pwrdm->name);
return -EAGAIN;
}
pr_debug("powerdomain: completed transition in %d loops\n", c);
return 0;
}
struct pwrdm_ops omap4_pwrdm_operations = {
.pwrdm_set_next_pwrst = omap4_pwrdm_set_next_pwrst,
.pwrdm_read_next_pwrst = omap4_pwrdm_read_next_pwrst,
.pwrdm_read_pwrst = omap4_pwrdm_read_pwrst,
.pwrdm_read_prev_pwrst = omap4_pwrdm_read_prev_pwrst,
.pwrdm_set_lowpwrstchange = omap4_pwrdm_set_lowpwrstchange,
.pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst,
.pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst,
.pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst,
.pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst,
.pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst,
.pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst,
.pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst,
.pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst,
.pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst,
.pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst,
.pwrdm_wait_transition = omap4_pwrdm_wait_transition,
};
arch/arm/mach-omap2/prm-regbits-24xx.h
View file @ 8634155e
......@@ -14,7 +14,7 @@
* published by the Free Software Foundation.
*/
#include "prm2xxx_3xxx.h"
#include "prm2xxx.h"
/* Bits shared between registers */
......@@ -209,9 +209,13 @@
/* RM_RSTST_WKUP specific bits */
/* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
#define OMAP24XX_EXTWMPU_RST_SHIFT 6
#define OMAP24XX_EXTWMPU_RST_MASK (1 << 6)
#define OMAP24XX_SECU_WD_RST_SHIFT 5
#define OMAP24XX_SECU_WD_RST_MASK (1 << 5)
#define OMAP24XX_MPU_WD_RST_SHIFT 4
#define OMAP24XX_MPU_WD_RST_MASK (1 << 4)
#define OMAP24XX_SECU_VIOL_RST_SHIFT 3
#define OMAP24XX_SECU_VIOL_RST_MASK (1 << 3)
/* PM_WKEN_WKUP specific bits */
......
arch/arm/mach-omap2/prm-regbits-34xx.h
View file @ 8634155e
......@@ -14,7 +14,7 @@
#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
#include "prm2xxx_3xxx.h"
#include "prm3xxx.h"
/* Shared register bits */
......@@ -509,15 +509,25 @@
#define OMAP3430_RSTTIME1_MASK (0xff << 0)
/* PRM_RSTST */
#define OMAP3430_ICECRUSHER_RST_SHIFT 10
#define OMAP3430_ICECRUSHER_RST_MASK (1 << 10)
#define OMAP3430_ICEPICK_RST_SHIFT 9
#define OMAP3430_ICEPICK_RST_MASK (1 << 9)
#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT 8
#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK (1 << 8)
#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT 7
#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK (1 << 7)
#define OMAP3430_EXTERNAL_WARM_RST_SHIFT 6
#define OMAP3430_EXTERNAL_WARM_RST_MASK (1 << 6)
#define OMAP3430_SECURE_WD_RST_SHIFT 5
#define OMAP3430_SECURE_WD_RST_MASK (1 << 5)
#define OMAP3430_MPU_WD_RST_SHIFT 4
#define OMAP3430_MPU_WD_RST_MASK (1 << 4)
#define OMAP3430_SECURITY_VIOL_RST_SHIFT 3
#define OMAP3430_SECURITY_VIOL_RST_MASK (1 << 3)
#define OMAP3430_GLOBAL_SW_RST_SHIFT 1
#define OMAP3430_GLOBAL_SW_RST_MASK (1 << 1)
#define OMAP3430_GLOBAL_COLD_RST_SHIFT 0
#define OMAP3430_GLOBAL_COLD_RST_MASK (1 << 0)
/* PRM_VOLTCTRL */
......
arch/arm/mach-omap2/prm.h
View file @ 8634155e
......@@ -52,5 +52,58 @@
#define OMAP_POWERSTATE_SHIFT 0
#define OMAP_POWERSTATE_MASK (0x3 << 0)
/*
* Standardized OMAP reset source bits
*
* To the extent these happen to match the hardware register bit
* shifts, it's purely coincidental. Used by omap-wdt.c.
* OMAP_UNKNOWN_RST_SRC_ID_SHIFT is a special value, used whenever
* there are any bits remaining in the global PRM_RSTST register that
* haven't been identified, or when the PRM code for the current SoC
* doesn't know how to interpret the register.
*/
#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0
#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1
#define OMAP_SECU_VIOL_RST_SRC_ID_SHIFT 2
#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3
#define OMAP_SECU_WD_RST_SRC_ID_SHIFT 4
#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5
#define OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT 6
#define OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT 7
#define OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT 8
#define OMAP_ICEPICK_RST_SRC_ID_SHIFT 9
#define OMAP_ICECRUSHER_RST_SRC_ID_SHIFT 10
#define OMAP_C2C_RST_SRC_ID_SHIFT 11
#define OMAP_UNKNOWN_RST_SRC_ID_SHIFT 12
#ifndef __ASSEMBLER__
/**
* struct prm_reset_src_map - map register bitshifts to standard bitshifts
* @reg_shift: bitshift in the PRM reset source register
* @std_shift: bitshift equivalent in the standard reset source list
*
* The fields are signed because -1 is used as a terminator.
*/
struct prm_reset_src_map {
s8 reg_shift;
s8 std_shift;
};
/**
* struct prm_ll_data - fn ptrs to per-SoC PRM function implementations
* @read_reset_sources: ptr to the Soc PRM-specific get_reset_source impl
*/
struct prm_ll_data {
u32 (*read_reset_sources)(void);
};
extern int prm_register(struct prm_ll_data *pld);
extern int prm_unregister(struct prm_ll_data *pld);
extern u32 prm_read_reset_sources(void);
#endif
#endif
arch/arm/mach-omap2/prm2xxx.c 0 → 100644
View file @ 8634155e
/*
* OMAP2xxx PRM module functions
*
* Copyright (C) 2010-2012 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
* Benoît Cousson
* Paul Walmsley
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
#include "vp.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include "prm2xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
/*
* omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP
* hardware register (which are specific to the OMAP2xxx SoCs) to
* reset source ID bit shifts (which is an OMAP SoC-independent
* enumeration)
*/
static struct prm_reset_src_map omap2xxx_prm_reset_src_map[] = {
{ OMAP_GLOBALCOLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
{ OMAP_GLOBALWARM_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
{ OMAP24XX_SECU_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
{ OMAP24XX_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
{ OMAP24XX_SECU_WD_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT },
{ OMAP24XX_EXTWMPU_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
{ -1, -1 },
};
/**
* omap2xxx_prm_read_reset_sources - return the last SoC reset source
*
* Return a u32 representing the last reset sources of the SoC. The
* returned reset source bits are standardized across OMAP SoCs.
*/
static u32 omap2xxx_prm_read_reset_sources(void)
{
struct prm_reset_src_map *p;
u32 r = 0;
u32 v;
v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
p = omap2xxx_prm_reset_src_map;
while (p->reg_shift >= 0 && p->std_shift >= 0) {
if (v & (1 << p->reg_shift))
r |= 1 << p->std_shift;
p++;
}
return r;
}
int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
{
omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
clkdm->pwrdm.ptr->prcm_offs,
OMAP2_PM_PWSTCTRL);
return 0;
}
int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm)
{
omap2_prm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
clkdm->pwrdm.ptr->prcm_offs,
OMAP2_PM_PWSTCTRL);
return 0;
}
struct pwrdm_ops omap2_pwrdm_operations = {
.pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
.pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
.pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
.pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
.pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
.pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
.pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
.pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
.pwrdm_wait_transition = omap2_pwrdm_wait_transition,
};
/*
*
*/
static struct prm_ll_data omap2xxx_prm_ll_data = {
.read_reset_sources = &omap2xxx_prm_read_reset_sources,
};
static int __init omap2xxx_prm_init(void)
{
if (!cpu_is_omap24xx())
return 0;
return prm_register(&omap2xxx_prm_ll_data);
}
subsys_initcall(omap2xxx_prm_init);
static void __exit omap2xxx_prm_exit(void)
{
if (!cpu_is_omap24xx())
return;
/* Should never happen */
WARN(prm_unregister(&omap2xxx_prm_ll_data),
"%s: prm_ll_data function pointer mismatch\n", __func__);
}
__exitcall(omap2xxx_prm_exit);
arch/arm/mach-omap2/prm2xxx.h 0 → 100644
View file @ 8634155e
/*
* OMAP2xxx Power/Reset Management (PRM) register definitions
*
* Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The PRM hardware modules on the OMAP2/3 are quite similar to each
* other. The PRM on OMAP4 has a new register layout, and is handled
* in a separate file.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
#include "prcm-common.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#define OMAP2420_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
#define OMAP2430_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
/*
* OMAP2-specific global PRM registers
* Use __raw_{read,write}l() with these registers.
*
* With a few exceptions, these are the register names beginning with
* PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
* bits.)
*
*/
#define OMAP2_PRCM_REVISION_OFFSET 0x0000
#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
/*
* Module specific PRM register offsets from PRM_BASE + domain offset
*
* Use prm_{read,write}_mod_reg() with these registers.
*
* With a few exceptions, these are the register names beginning with
* {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the
* IRQSTATUS and IRQENABLE bits.)
*/
/* Register offsets appearing on both OMAP2 and OMAP3 */
#define OMAP2_RM_RSTCTRL 0x0050
#define OMAP2_RM_RSTTIME 0x0054
#define OMAP2_RM_RSTST 0x0058
#define OMAP2_PM_PWSTCTRL 0x00e0
#define OMAP2_PM_PWSTST 0x00e4
#define PM_WKEN 0x00a0
#define PM_WKEN1 PM_WKEN
#define PM_WKST 0x00b0
#define PM_WKST1 PM_WKST
#define PM_WKDEP 0x00c8
#define PM_EVGENCTRL 0x00d4
#define PM_EVGENONTIM 0x00d8
#define PM_EVGENOFFTIM 0x00dc
/* OMAP2xxx specific register offsets */
#define OMAP24XX_PM_WKEN2 0x00a4
#define OMAP24XX_PM_WKST2 0x00b4
#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
#ifndef __ASSEMBLER__
/* Function prototypes */
extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
extern int __init prm2xxx_init(void);
extern int __exit prm2xxx_exit(void);
#endif
#endif
arch/arm/mach-omap2/prm2xxx_3xxx.c
View file @ 8634155e
......@@ -15,82 +15,12 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <plat/prcm.h>
#include "soc.h"
#include "common.h"
#include "vp.h"
#include "powerdomain.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-34xx.h"
static const struct omap_prcm_irq omap3_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
OMAP_PRCM_IRQ("io", 9, 1),
};
static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
.ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
.mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
.nr_regs = 1,
.irqs = omap3_prcm_irqs,
.nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
.irq = 11 + OMAP_INTC_START,
.read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
.ocp_barrier = &omap3xxx_prm_ocp_barrier,
.save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
.restore_irqen = &omap3xxx_prm_restore_irqen,
};
u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
{
return __raw_readl(prm_base + module + idx);
}
void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
{
__raw_writel(val, prm_base + module + idx);
}
/* Read-modify-write a register in a PRM module. Caller must lock */
u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
{
u32 v;
v = omap2_prm_read_mod_reg(module, idx);
v &= ~mask;
v |= bits;
omap2_prm_write_mod_reg(v, module, idx);
return v;
}
/* Read a PRM register, AND it, and shift the result down to bit 0 */
u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
{
u32 v;
v = omap2_prm_read_mod_reg(domain, idx);
v &= mask;
v >>= __ffs(mask);
return v;
}
u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
}
u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
}
#include "clockdomain.h"
/**
* omap2_prm_is_hardreset_asserted - read the HW reset line state of
......@@ -104,9 +34,6 @@ u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
*/
int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
{
if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
return -EINVAL;
return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
(1 << shift));
}
......@@ -127,9 +54,6 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
{
u32 mask;
if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
return -EINVAL;
mask = 1 << shift;
omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
......@@ -156,9 +80,6 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
u32 rst, st;
int c;
if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
return -EINVAL;
rst = 1 << rst_shift;
st = 1 << st_shift;
......@@ -178,188 +99,155 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
/* PRM VP */
/*
* struct omap3_vp - OMAP3 VP register access description.
* @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
*/
struct omap3_vp {
u32 tranxdone_status;
};
static struct omap3_vp omap3_vp[] = {
[OMAP3_VP_VDD_MPU_ID] = {
.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
},
[OMAP3_VP_VDD_CORE_ID] = {
.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
},
};
#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
u32 omap3_prm_vp_check_txdone(u8 vp_id)
{
struct omap3_vp *vp = &omap3_vp[vp_id];
u32 irqstatus;
irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
return irqstatus & vp->tranxdone_status;
}
/* Powerdomain low-level functions */
void omap3_prm_vp_clear_txdone(u8 vp_id)
/* Common functions across OMAP2 and OMAP3 */
int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
struct omap3_vp *vp = &omap3_vp[vp_id];
omap2_prm_write_mod_reg(vp->tranxdone_status,
OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
(pwrst << OMAP_POWERSTATE_SHIFT),
pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
return 0;
}
u32 omap3_prm_vcvp_read(u8 offset)
int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL,
OMAP_POWERSTATE_MASK);
}
void omap3_prm_vcvp_write(u32 val, u8 offset)
int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTST,
OMAP_POWERSTATEST_MASK);
}
u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst)
{
return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
u32 m;
m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL);
return 0;
}
/**
* omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
* @events: ptr to a u32, preallocated by caller
*
* Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
* MPU IRQs, and store the result into the u32 pointed to by @events.
* No return value.
*/
void omap3xxx_prm_read_pending_irqs(unsigned long *events)
int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst)
{
u32 mask, st;
u32 m;
m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
/* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL);
events[0] = mask & st;
return 0;
}
/**
* omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
*
* Force any buffered writes to the PRM IP block to complete. Needed
* by the PRM IRQ handler, which reads and writes directly to the IP
* block, to avoid race conditions after acknowledging or clearing IRQ
* bits. No return value.
*/
void omap3xxx_prm_ocp_barrier(void)
int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
u32 m;
m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
m);
}
/**
* omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
* @saved_mask: ptr to a u32 array to save IRQENABLE bits
*
* Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
* must be allocated by the caller. Intended to be used in the PRM
* interrupt handler suspend callback. The OCP barrier is needed to
* ensure the write to disable PRM interrupts reaches the PRM before
* returning; otherwise, spurious interrupts might occur. No return
* value.
*/
void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
{
saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
u32 m;
m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
/* OCP barrier */
omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL, m);
}
/**
* omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
* @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
*
* Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
* to be used in the PRM interrupt handler resume callback to restore
* values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
* barrier should be needed here; any pending PRM interrupts will fire
* once the writes reach the PRM. No return value.
*/
void omap3xxx_prm_restore_irqen(u32 *saved_mask)
int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
{
omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
u32 v;
v = pwrst << __ffs(OMAP_LOGICRETSTATE_MASK);
omap2_prm_rmw_mod_reg_bits(OMAP_LOGICRETSTATE_MASK, v, pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL);
return 0;
}
/**
* omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
*
* Clear any previously-latched I/O wakeup events and ensure that the
* I/O wakeup gates are aligned with the current mux settings. Works
* by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
* deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
* return value.
*/
void omap3xxx_prm_reconfigure_io_chain(void)
int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
{
int i = 0;
u32 c = 0;
omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
PM_WKEN);
/*
* REVISIT: pwrdm_wait_transition() may be better implemented
* via a callback and a periodic timer check -- how long do we expect
* powerdomain transitions to take?
*/
omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
OMAP3430_ST_IO_CHAIN_MASK,
MAX_IOPAD_LATCH_TIME, i);
if (i == MAX_IOPAD_LATCH_TIME)
pr_warn("PRM: I/O chain clock line assertion timed out\n");
/* XXX Is this udelay() value meaningful? */
while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
OMAP_INTRANSITION_MASK) &&
(c++ < PWRDM_TRANSITION_BAILOUT))
udelay(1);
omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
PM_WKEN);
if (c > PWRDM_TRANSITION_BAILOUT) {
pr_err("powerdomain: %s: waited too long to complete transition\n",
pwrdm->name);
return -EAGAIN;
}
omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
PM_WKST);
pr_debug("powerdomain: completed transition in %d loops\n", c);
omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
return 0;
}
/**
* omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
*
* Activates the I/O wakeup event latches and allows events logged by
* those latches to signal a wakeup event to the PRCM. For I/O
* wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
* registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
* No return value.
*/
static void __init omap3xxx_prm_enable_io_wakeup(void)
int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
return 0;
}
int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
return 0;
}
int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
if (omap3_has_io_wakeup())
omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
PM_WKEN);
return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
PM_WKDEP, (1 << clkdm2->dep_bit));
}
static int __init omap3xxx_prcm_init(void)
int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
{
int ret = 0;
if (cpu_is_omap34xx()) {
omap3xxx_prm_enable_io_wakeup();
ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
if (!ret)
irq_set_status_flags(omap_prcm_event_to_irq("io"),
IRQ_NOAUTOEN);
struct clkdm_dep *cd;
u32 mask = 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
/* PRM accesses are slow, so minimize them */
mask |= 1 << cd->clkdm->dep_bit;
atomic_set(&cd->wkdep_usecount, 0);
}
return ret;
omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
PM_WKDEP);
return 0;
}
subsys_initcall(omap3xxx_prcm_init);
arch/arm/mach-omap2/prm2xxx_3xxx.h
View file @ 8634155e
/*
* OMAP2/3 Power/Reset Management (PRM) register definitions
* OMAP2xxx/3xxx-common Power/Reset Management (PRM) register definitions
*
* Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
* Paul Walmsley
*
......@@ -19,160 +19,6 @@
#include "prcm-common.h"
#include "prm.h"
#define OMAP2420_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
#define OMAP2430_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
#define OMAP34XX_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
/*
* OMAP2-specific global PRM registers
* Use __raw_{read,write}l() with these registers.
*
* With a few exceptions, these are the register names beginning with
* PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
* bits.)
*
*/
#define OMAP2_PRCM_REVISION_OFFSET 0x0000
#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
/*
* OMAP3-specific global PRM registers
* Use __raw_{read,write}l() with these registers.
*
* With a few exceptions, these are the register names beginning with
* PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE
* bits.)
*/
#define OMAP3_PRM_REVISION_OFFSET 0x0004
#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
#define OMAP3_PRM_RSTST_OFFSET 0x0058
#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
* Module specific PRM register offsets from PRM_BASE + domain offset
*
......@@ -200,66 +46,83 @@
#define PM_EVGENONTIM 0x00d8
#define PM_EVGENOFFTIM 0x00dc
/* OMAP2xxx specific register offsets */
#define OMAP24XX_PM_WKEN2 0x00a4
#define OMAP24XX_PM_WKST2 0x00b4
#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
/* OMAP3 specific register offsets */
#define OMAP3430ES2_PM_WKEN3 0x00f0
#define OMAP3430ES2_PM_WKST3 0x00b8
#define OMAP3430_PM_MPUGRPSEL 0x00a4
#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
#define OMAP3430_PM_IVAGRPSEL 0x00a8
#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
#define OMAP3430_PM_PREPWSTST 0x00e8
#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
#ifndef __ASSEMBLER__
#include <linux/io.h>
#include "powerdomain.h"
#ifndef __ASSEMBLER__
/* Power/reset management domain register get/set */
extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
extern u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
extern u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
extern u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
extern u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
{
return __raw_readl(prm_base + module + idx);
}
static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
{
__raw_writel(val, prm_base + module + idx);
}
/* Read-modify-write a register in a PRM module. Caller must lock */
static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module,
s16 idx)
{
u32 v;
v = omap2_prm_read_mod_reg(module, idx);
v &= ~mask;
v |= bits;
omap2_prm_write_mod_reg(v, module, idx);
return v;
}
/* Read a PRM register, AND it, and shift the result down to bit 0 */
static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
{
u32 v;
v = omap2_prm_read_mod_reg(domain, idx);
v &= mask;
v >>= __ffs(mask);
return v;
}
static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
}
static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
}
/* These omap2_ PRM functions apply to both OMAP2 and 3 */
extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
/* OMAP3-specific VP functions */
u32 omap3_prm_vp_check_txdone(u8 vp_id);
void omap3_prm_vp_clear_txdone(u8 vp_id);
/*
* OMAP3 access functions for voltage controller (VC) and
* voltage proccessor (VP) in the PRM.
*/
extern u32 omap3_prm_vcvp_read(u8 offset);
extern void omap3_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
extern void omap3xxx_prm_reconfigure_io_chain(void);
/* PRM interrupt-related functions */
extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
extern void omap3xxx_prm_ocp_barrier(void);
extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
extern int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm);
extern int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst);
extern int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst);
extern int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
extern int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
extern int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
extern int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm);
extern int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2);
extern int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2);
extern int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2);
extern int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm);
#endif /* __ASSEMBLER */
......@@ -348,7 +211,9 @@ extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
*
* 3430: RM_RSTST_CORE, RM_RSTST_EMU
*/
#define OMAP_GLOBALWARM_RST_SHIFT 1
#define OMAP_GLOBALWARM_RST_MASK (1 << 1)
#define OMAP_GLOBALCOLD_RST_SHIFT 0
#define OMAP_GLOBALCOLD_RST_MASK (1 << 0)
/*
......
arch/arm/mach-omap2/prm33xx.c
View file @ 8634155e
......@@ -22,6 +22,7 @@
#include "../plat-omap/common.h"
#include "common.h"
#include "powerdomain.h"
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
......@@ -133,3 +134,204 @@ int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
(pwrst << OMAP_POWERSTATE_SHIFT),
pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
return 0;
}
static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
v &= OMAP_POWERSTATE_MASK;
v >>= OMAP_POWERSTATE_SHIFT;
return v;
}
static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
v &= OMAP_POWERSTATEST_MASK;
v >>= OMAP_POWERSTATEST_SHIFT;
return v;
}
static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
return v;
}
static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
{
am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
(1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
return 0;
}
static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
{
am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
AM33XX_LASTPOWERSTATEENTERED_MASK,
pwrdm->prcm_offs, pwrdm->pwrstst_offs);
return 0;
}
static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
{
u32 m;
m = pwrdm->logicretstate_mask;
if (!m)
return -EINVAL;
am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
return 0;
}
static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
v &= AM33XX_LOGICSTATEST_MASK;
v >>= AM33XX_LOGICSTATEST_SHIFT;
return v;
}
static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
{
u32 v, m;
m = pwrdm->logicretstate_mask;
if (!m)
return -EINVAL;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
v &= m;
v >>= __ffs(m);
return v;
}
static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst)
{
u32 m;
m = pwrdm->mem_on_mask[bank];
if (!m)
return -EINVAL;
am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
return 0;
}
static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst)
{
u32 m;
m = pwrdm->mem_ret_mask[bank];
if (!m)
return -EINVAL;
am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
return 0;
}
static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
u32 m, v;
m = pwrdm->mem_pwrst_mask[bank];
if (!m)
return -EINVAL;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
v &= m;
v >>= __ffs(m);
return v;
}
static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
{
u32 m, v;
m = pwrdm->mem_retst_mask[bank];
if (!m)
return -EINVAL;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
v &= m;
v >>= __ffs(m);
return v;
}
static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
{
u32 c = 0;
/*
* REVISIT: pwrdm_wait_transition() may be better implemented
* via a callback and a periodic timer check -- how long do we expect
* powerdomain transitions to take?
*/
/* XXX Is this udelay() value meaningful? */
while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
& OMAP_INTRANSITION_MASK) &&
(c++ < PWRDM_TRANSITION_BAILOUT))
udelay(1);
if (c > PWRDM_TRANSITION_BAILOUT) {
pr_err("powerdomain: %s: waited too long to complete transition\n",
pwrdm->name);
return -EAGAIN;
}
pr_debug("powerdomain: completed transition in %d loops\n", c);
return 0;
}
struct pwrdm_ops am33xx_pwrdm_operations = {
.pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst,
.pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst,
.pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst,
.pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst,
.pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst,
.pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst,
.pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst,
.pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst,
.pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange,
.pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst,
.pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst,
.pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst,
.pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst,
.pwrdm_wait_transition = am33xx_pwrdm_wait_transition,
};
arch/arm/mach-omap2/prm3xxx.c 0 → 100644
View file @ 8634155e
/*
* OMAP3xxx PRM module functions
*
* Copyright (C) 2010-2012 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
* Benoît Cousson
* Paul Walmsley
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
#include "vp.h"
#include "powerdomain.h"
#include "prm3xxx.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
static const struct omap_prcm_irq omap3_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
OMAP_PRCM_IRQ("io", 9, 1),
};
static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
.ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
.mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
.nr_regs = 1,
.irqs = omap3_prcm_irqs,
.nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
.irq = 11 + OMAP_INTC_START,
.read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
.ocp_barrier = &omap3xxx_prm_ocp_barrier,
.save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
.restore_irqen = &omap3xxx_prm_restore_irqen,
};
/*
* omap3_prm_reset_src_map - map from bits in the PRM_RSTST hardware
* register (which are specific to OMAP3xxx SoCs) to reset source ID
* bit shifts (which is an OMAP SoC-independent enumeration)
*/
static struct prm_reset_src_map omap3xxx_prm_reset_src_map[] = {
{ OMAP3430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
{ OMAP3430_GLOBAL_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
{ OMAP3430_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
{ OMAP3430_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
{ OMAP3430_SECURE_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
{ OMAP3430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
{ OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT,
OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
{ OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT,
OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
{ OMAP3430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
{ OMAP3430_ICECRUSHER_RST_SHIFT, OMAP_ICECRUSHER_RST_SRC_ID_SHIFT },
{ -1, -1 },
};
/* PRM VP */
/*
* struct omap3_vp - OMAP3 VP register access description.
* @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
*/
struct omap3_vp {
u32 tranxdone_status;
};
static struct omap3_vp omap3_vp[] = {
[OMAP3_VP_VDD_MPU_ID] = {
.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
},
[OMAP3_VP_VDD_CORE_ID] = {
.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
},
};
#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
u32 omap3_prm_vp_check_txdone(u8 vp_id)
{
struct omap3_vp *vp = &omap3_vp[vp_id];
u32 irqstatus;
irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
return irqstatus & vp->tranxdone_status;
}
void omap3_prm_vp_clear_txdone(u8 vp_id)
{
struct omap3_vp *vp = &omap3_vp[vp_id];
omap2_prm_write_mod_reg(vp->tranxdone_status,
OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
}
u32 omap3_prm_vcvp_read(u8 offset)
{
return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
}
void omap3_prm_vcvp_write(u32 val, u8 offset)
{
omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
}
u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
{
return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
}
/**
* omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
* @events: ptr to a u32, preallocated by caller
*
* Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
* MPU IRQs, and store the result into the u32 pointed to by @events.
* No return value.
*/
void omap3xxx_prm_read_pending_irqs(unsigned long *events)
{
u32 mask, st;
/* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
events[0] = mask & st;
}
/**
* omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
*
* Force any buffered writes to the PRM IP block to complete. Needed
* by the PRM IRQ handler, which reads and writes directly to the IP
* block, to avoid race conditions after acknowledging or clearing IRQ
* bits. No return value.
*/
void omap3xxx_prm_ocp_barrier(void)
{
omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
}
/**
* omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
* @saved_mask: ptr to a u32 array to save IRQENABLE bits
*
* Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
* must be allocated by the caller. Intended to be used in the PRM
* interrupt handler suspend callback. The OCP barrier is needed to
* ensure the write to disable PRM interrupts reaches the PRM before
* returning; otherwise, spurious interrupts might occur. No return
* value.
*/
void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
{
saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
/* OCP barrier */
omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
}
/**
* omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
* @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
*
* Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
* to be used in the PRM interrupt handler resume callback to restore
* values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
* barrier should be needed here; any pending PRM interrupts will fire
* once the writes reach the PRM. No return value.
*/
void omap3xxx_prm_restore_irqen(u32 *saved_mask)
{
omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
}
/**
* omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
*
* Clear any previously-latched I/O wakeup events and ensure that the
* I/O wakeup gates are aligned with the current mux settings. Works
* by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
* deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
* return value.
*/
void omap3xxx_prm_reconfigure_io_chain(void)
{
int i = 0;
omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
PM_WKEN);
omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
OMAP3430_ST_IO_CHAIN_MASK,
MAX_IOPAD_LATCH_TIME, i);
if (i == MAX_IOPAD_LATCH_TIME)
pr_warn("PRM: I/O chain clock line assertion timed out\n");
omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
PM_WKEN);
omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
PM_WKST);
omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
}
/**
* omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
*
* Activates the I/O wakeup event latches and allows events logged by
* those latches to signal a wakeup event to the PRCM. For I/O
* wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
* registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
* No return value.
*/
static void __init omap3xxx_prm_enable_io_wakeup(void)
{
if (omap3_has_io_wakeup())
omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
PM_WKEN);
}
/**
* omap3xxx_prm_read_reset_sources - return the last SoC reset source
*
* Return a u32 representing the last reset sources of the SoC. The
* returned reset source bits are standardized across OMAP SoCs.
*/
static u32 omap3xxx_prm_read_reset_sources(void)
{
struct prm_reset_src_map *p;
u32 r = 0;
u32 v;
v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
p = omap3xxx_prm_reset_src_map;
while (p->reg_shift >= 0 && p->std_shift >= 0) {
if (v & (1 << p->reg_shift))
r |= 1 << p->std_shift;
p++;
}
return r;
}
/* Powerdomain low-level functions */
/* Applicable only for OMAP3. Not supported on OMAP2 */
static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP3430_PM_PREPWSTST,
OMAP3430_LASTPOWERSTATEENTERED_MASK);
}
static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTST,
OMAP3430_LOGICSTATEST_MASK);
}
static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL,
OMAP3430_LOGICSTATEST_MASK);
}
static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP3430_PM_PREPWSTST,
OMAP3430_LASTLOGICSTATEENTERED_MASK);
}
static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
{
switch (bank) {
case 0:
return OMAP3430_LASTMEM1STATEENTERED_MASK;
case 1:
return OMAP3430_LASTMEM2STATEENTERED_MASK;
case 2:
return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
case 3:
return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
default:
WARN_ON(1); /* should never happen */
return -EEXIST;
}
return 0;
}
static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
u32 m;
m = omap3_get_mem_bank_lastmemst_mask(bank);
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP3430_PM_PREPWSTST, m);
}
static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
{
omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
return 0;
}
static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
{
return omap2_prm_rmw_mod_reg_bits(0,
1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
}
static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
{
return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
0, pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL);
}
struct pwrdm_ops omap3_pwrdm_operations = {
.pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
.pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
.pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
.pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst,
.pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
.pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst,
.pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst,
.pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst,
.pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
.pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
.pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
.pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
.pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst,
.pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst,
.pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar,
.pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar,
.pwrdm_wait_transition = omap2_pwrdm_wait_transition,
};
/*
*
*/
static struct prm_ll_data omap3xxx_prm_ll_data = {
.read_reset_sources = &omap3xxx_prm_read_reset_sources,
};
static int __init omap3xxx_prm_init(void)
{
int ret;
if (!cpu_is_omap34xx())
return 0;
ret = prm_register(&omap3xxx_prm_ll_data);
if (ret)
return ret;
omap3xxx_prm_enable_io_wakeup();
ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
if (!ret)
irq_set_status_flags(omap_prcm_event_to_irq("io"),
IRQ_NOAUTOEN);
return ret;
}
subsys_initcall(omap3xxx_prm_init);
static void __exit omap3xxx_prm_exit(void)
{
if (!cpu_is_omap34xx())
return;
/* Should never happen */
WARN(prm_unregister(&omap3xxx_prm_ll_data),
"%s: prm_ll_data function pointer mismatch\n", __func__);
}
__exitcall(omap3xxx_prm_exit);
arch/arm/mach-omap2/prm3xxx.h 0 → 100644
View file @ 8634155e
/*
* OMAP3xxx Power/Reset Management (PRM) register definitions
*
* Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The PRM hardware modules on the OMAP2/3 are quite similar to each
* other. The PRM on OMAP4 has a new register layout, and is handled
* in a separate file.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_PRM3XXX_H
#define __ARCH_ARM_MACH_OMAP2_PRM3XXX_H
#include "prcm-common.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#define OMAP34XX_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
/*
* OMAP3-specific global PRM registers
* Use __raw_{read,write}l() with these registers.
*
* With a few exceptions, these are the register names beginning with
* PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE
* bits.)
*/
#define OMAP3_PRM_REVISION_OFFSET 0x0004
#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
#define OMAP3_PRM_RSTST_OFFSET 0x0058
#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/* OMAP3 specific register offsets */
#define OMAP3430ES2_PM_WKEN3 0x00f0
#define OMAP3430ES2_PM_WKST3 0x00b8
#define OMAP3430_PM_MPUGRPSEL 0x00a4
#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
#define OMAP3430_PM_IVAGRPSEL 0x00a8
#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
#define OMAP3430_PM_PREPWSTST 0x00e8
#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
#ifndef __ASSEMBLER__
/* OMAP3-specific VP functions */
u32 omap3_prm_vp_check_txdone(u8 vp_id);
void omap3_prm_vp_clear_txdone(u8 vp_id);
/*
* OMAP3 access functions for voltage controller (VC) and
* voltage proccessor (VP) in the PRM.
*/
extern u32 omap3_prm_vcvp_read(u8 offset);
extern void omap3_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
extern void omap3xxx_prm_reconfigure_io_chain(void);
/* PRM interrupt-related functions */
extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
extern void omap3xxx_prm_ocp_barrier(void);
extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
extern u32 omap3xxx_prm_get_reset_sources(void);
#endif /* __ASSEMBLER */
#endif
arch/arm/mach-omap2/prm44xx.c
View file @ 8634155e
/*
* OMAP4 PRM module functions
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Copyright (C) 2011-2012 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
* Benoît Cousson
* Paul Walmsley
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -27,6 +28,9 @@
#include "prm-regbits-44xx.h"
#include "prcm44xx.h"
#include "prminst44xx.h"
#include "powerdomain.h"
/* Static data */
static const struct omap_prcm_irq omap4_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
......@@ -46,6 +50,33 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
.restore_irqen = &omap44xx_prm_restore_irqen,
};
/*
* omap44xx_prm_reset_src_map - map from bits in the PRM_RSTST
* hardware register (which are specific to OMAP44xx SoCs) to reset
* source ID bit shifts (which is an OMAP SoC-independent
* enumeration)
*/
static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = {
{ OMAP4430_RST_GLOBAL_WARM_SW_SHIFT,
OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
{ OMAP4430_RST_GLOBAL_COLD_SW_SHIFT,
OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
{ OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT,
OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
{ OMAP4430_MPU_WDT_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
{ OMAP4430_SECURE_WDT_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT },
{ OMAP4430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
{ OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT,
OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
{ OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT,
OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT },
{ OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT,
OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
{ OMAP4430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
{ OMAP4430_C2C_RST_SHIFT, OMAP_C2C_RST_SRC_ID_SHIFT },
{ -1, -1 },
};
/* PRM low-level functions */
/* Read a register in a CM/PRM instance in the PRM module */
......@@ -291,12 +322,324 @@ static void __init omap44xx_prm_enable_io_wakeup(void)
OMAP4_PRM_IO_PMCTRL_OFFSET);
}
static int __init omap4xxx_prcm_init(void)
/**
* omap44xx_prm_read_reset_sources - return the last SoC reset source
*
* Return a u32 representing the last reset sources of the SoC. The
* returned reset source bits are standardized across OMAP SoCs.
*/
static u32 omap44xx_prm_read_reset_sources(void)
{
struct prm_reset_src_map *p;
u32 r = 0;
u32 v;
v = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
OMAP4_RM_RSTST);
p = omap44xx_prm_reset_src_map;
while (p->reg_shift >= 0 && p->std_shift >= 0) {
if (v & (1 << p->reg_shift))
r |= 1 << p->std_shift;
p++;
}
return r;
}
/* Powerdomain low-level functions */
static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK,
(pwrst << OMAP_POWERSTATE_SHIFT),
pwrdm->prcm_partition,
pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
return 0;
}
static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTCTRL);
v &= OMAP_POWERSTATE_MASK;
v >>= OMAP_POWERSTATE_SHIFT;
return v;
}
static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTST);
v &= OMAP_POWERSTATEST_MASK;
v >>= OMAP_POWERSTATEST_SHIFT;
return v;
}
static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTST);
v &= OMAP4430_LASTPOWERSTATEENTERED_MASK;
v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT;
return v;
}
static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
{
omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
(1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
pwrdm->prcm_partition,
pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
return 0;
}
static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
{
omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK,
OMAP4430_LASTPOWERSTATEENTERED_MASK,
pwrdm->prcm_partition,
pwrdm->prcm_offs, OMAP4_PM_PWSTST);
return 0;
}
static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
{
u32 v;
v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK);
omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v,
pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTCTRL);
return 0;
}
static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst)
{
u32 m;
m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTCTRL);
return 0;
}
static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst)
{
u32 m;
m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTCTRL);
return 0;
}
static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTST);
v &= OMAP4430_LOGICSTATEST_MASK;
v >>= OMAP4430_LOGICSTATEST_SHIFT;
return v;
}
static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
{
if (cpu_is_omap44xx()) {
omap44xx_prm_enable_io_wakeup();
return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
u32 v;
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTCTRL);
v &= OMAP4430_LOGICRETSTATE_MASK;
v >>= OMAP4430_LOGICRETSTATE_SHIFT;
return v;
}
/**
* omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate
* @pwrdm: struct powerdomain * to read the state for
*
* Reads the previous logic powerstate for a powerdomain. This
* function must determine the previous logic powerstate by first
* checking the previous powerstate for the domain. If that was OFF,
* then logic has been lost. If previous state was RETENTION, the
* function reads the setting for the next retention logic state to
* see the actual value. In every other case, the logic is
* retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
* depending whether the logic was retained or not.
*/
static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
{
int state;
state = omap4_pwrdm_read_prev_pwrst(pwrdm);
if (state == PWRDM_POWER_OFF)
return PWRDM_POWER_OFF;
if (state != PWRDM_POWER_RET)
return PWRDM_POWER_RET;
return omap4_pwrdm_read_logic_retst(pwrdm);
}
static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
u32 m, v;
m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTST);
v &= m;
v >>= __ffs(m);
return v;
}
static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
{
u32 m, v;
m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
OMAP4_PM_PWSTCTRL);
v &= m;
v >>= __ffs(m);
return v;
}
/**
* omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate
* @pwrdm: struct powerdomain * to read mem powerstate for
* @bank: memory bank index
*
* Reads the previous memory powerstate for a powerdomain. This
* function must determine the previous memory powerstate by first
* checking the previous powerstate for the domain. If that was OFF,
* then logic has been lost. If previous state was RETENTION, the
* function reads the setting for the next memory retention state to
* see the actual value. In every other case, the logic is
* retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
* depending whether logic was retained or not.
*/
static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
int state;
state = omap4_pwrdm_read_prev_pwrst(pwrdm);
if (state == PWRDM_POWER_OFF)
return PWRDM_POWER_OFF;
if (state != PWRDM_POWER_RET)
return PWRDM_POWER_RET;
return omap4_pwrdm_read_mem_retst(pwrdm, bank);
}
static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
{
u32 c = 0;
/*
* REVISIT: pwrdm_wait_transition() may be better implemented
* via a callback and a periodic timer check -- how long do we expect
* powerdomain transitions to take?
*/
/* XXX Is this udelay() value meaningful? */
while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition,
pwrdm->prcm_offs,
OMAP4_PM_PWSTST) &
OMAP_INTRANSITION_MASK) &&
(c++ < PWRDM_TRANSITION_BAILOUT))
udelay(1);
if (c > PWRDM_TRANSITION_BAILOUT) {
pr_err("powerdomain: %s: waited too long to complete transition\n",
pwrdm->name);
return -EAGAIN;
}
pr_debug("powerdomain: completed transition in %d loops\n", c);
return 0;
}
subsys_initcall(omap4xxx_prcm_init);
struct pwrdm_ops omap4_pwrdm_operations = {
.pwrdm_set_next_pwrst = omap4_pwrdm_set_next_pwrst,
.pwrdm_read_next_pwrst = omap4_pwrdm_read_next_pwrst,
.pwrdm_read_pwrst = omap4_pwrdm_read_pwrst,
.pwrdm_read_prev_pwrst = omap4_pwrdm_read_prev_pwrst,
.pwrdm_set_lowpwrstchange = omap4_pwrdm_set_lowpwrstchange,
.pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst,
.pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst,
.pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst,
.pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst,
.pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst,
.pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst,
.pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst,
.pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst,
.pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst,
.pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst,
.pwrdm_wait_transition = omap4_pwrdm_wait_transition,
};
/*
* XXX document
*/
static struct prm_ll_data omap44xx_prm_ll_data = {
.read_reset_sources = &omap44xx_prm_read_reset_sources,
};
static int __init omap44xx_prm_init(void)
{
int ret;
if (!cpu_is_omap44xx())
return 0;
ret = prm_register(&omap44xx_prm_ll_data);
if (ret)
return ret;
omap44xx_prm_enable_io_wakeup();
return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
}
subsys_initcall(omap44xx_prm_init);
static void __exit omap44xx_prm_exit(void)
{
if (!cpu_is_omap44xx())
return;
/* Should never happen */
WARN(prm_unregister(&omap44xx_prm_ll_data),
"%s: prm_ll_data function pointer mismatch\n", __func__);
}
__exitcall(omap44xx_prm_exit);
arch/arm/mach-omap2/prm44xx.h
View file @ 8634155e
......@@ -771,6 +771,8 @@ extern void omap44xx_prm_ocp_barrier(void);
extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap44xx_prm_restore_irqen(u32 *saved_mask);
extern u32 omap44xx_prm_get_reset_sources(void);
# endif
#endif
arch/arm/mach-omap2/prm_common.c
View file @ 8634155e
......@@ -28,6 +28,8 @@
#include <plat/prcm.h>
#include "prm2xxx_3xxx.h"
#include "prm2xxx.h"
#include "prm3xxx.h"
#include "prm44xx.h"
/*
......@@ -53,6 +55,13 @@ static struct irq_chip_generic **prcm_irq_chips;
*/
static struct omap_prcm_irq_setup *prcm_irq_setup;
/*
* prm_ll_data: function pointers to SoC-specific implementations of
* common PRM functions
*/
static struct prm_ll_data null_prm_ll_data;
static struct prm_ll_data *prm_ll_data = &null_prm_ll_data;
/* Private functions */
/*
......@@ -319,64 +328,71 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
return -ENOMEM;
}
/*
* Stubbed functions so that common files continue to build when
* custom builds are used
* XXX These are temporary and should be removed at the earliest possible
* opportunity
/**
* prm_read_reset_sources - return the sources of the SoC's last reset
*
* Return a u32 bitmask representing the reset sources that caused the
* SoC to reset. The low-level per-SoC functions called by this
* function remap the SoC-specific reset source bits into an
* OMAP-common set of reset source bits, defined in
* arch/arm/mach-omap2/prm.h. Returns the standardized reset source
* u32 bitmask from the hardware upon success, or returns (1 <<
* OMAP_UNKNOWN_RST_SRC_ID_SHIFT) if no low-level read_reset_sources()
* function was registered.
*/
u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx)
u32 prm_read_reset_sources(void)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
u32 ret = 1 << OMAP_UNKNOWN_RST_SRC_ID_SHIFT;
void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
}
if (prm_ll_data->read_reset_sources)
ret = prm_ll_data->read_reset_sources();
else
WARN_ONCE(1, "prm: %s: no mapping function defined for reset sources\n", __func__);
u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
s16 module, s16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
return ret;
}
u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
/**
* prm_register - register per-SoC low-level data with the PRM
* @pld: low-level per-SoC OMAP PRM data & function pointers to register
*
* Register per-SoC low-level OMAP PRM data and function pointers with
* the OMAP PRM common interface. The caller must keep the data
* pointed to by @pld valid until it calls prm_unregister() and
* it returns successfully. Returns 0 upon success, -EINVAL if @pld
* is NULL, or -EEXIST if prm_register() has already been called
* without an intervening prm_unregister().
*/
int prm_register(struct prm_ll_data *pld)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
if (!pld)
return -EINVAL;
u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
if (prm_ll_data != &null_prm_ll_data)
return -EEXIST;
u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
prm_ll_data = pld;
int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
/**
* prm_unregister - unregister per-SoC low-level data & function pointers
* @pld: low-level per-SoC OMAP PRM data & function pointers to unregister
*
* Unregister per-SoC low-level OMAP PRM data and function pointers
* that were previously registered with prm_register(). The
* caller may not destroy any of the data pointed to by @pld until
* this function returns successfully. Returns 0 upon success, or
* -EINVAL if @pld is NULL or if @pld does not match the struct
* prm_ll_data * previously registered by prm_register().
*/
int prm_unregister(struct prm_ll_data *pld)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
if (!pld || prm_ll_data != pld)
return -EINVAL;
prm_ll_data = &null_prm_ll_data;
int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
u8 st_shift)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
arch/arm/mach-omap2/sdrc2xxx.c
View file @ 8634155e
......@@ -29,7 +29,7 @@
#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "prm2xxx_3xxx.h"
#include "prm2xxx.h"
#include "clock.h"
#include "sdrc.h"
......
arch/arm/mach-omap2/sleep34xx.S
View file @ 8634155e
......@@ -30,8 +30,8 @@
#include "omap34xx.h"
#include "iomap.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "cm3xxx.h"
#include "prm3xxx.h"
#include "sdrc.h"
#include "control.h"
......
arch/arm/mach-omap2/sram242x.S
View file @ 8634155e
......@@ -34,8 +34,8 @@
#include "soc.h"
#include "iomap.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx.h"
#include "cm2xxx.h"
#include "sdrc.h"
.text
......
arch/arm/mach-omap2/sram243x.S
View file @ 8634155e
......@@ -34,8 +34,8 @@
#include "soc.h"
#include "iomap.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx.h"
#include "cm2xxx.h"
#include "sdrc.h"
.text
......
arch/arm/mach-omap2/sram34xx.S
View file @ 8634155e
......@@ -32,7 +32,7 @@
#include "soc.h"
#include "iomap.h"
#include "sdrc.h"
#include "cm2xxx_3xxx.h"
#include "cm3xxx.h"
/*
* This file needs be built unconditionally as ARM to interoperate correctly
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7