Merge drm/drm-next into drm-intel-next-queued

A backmerge to unblock gen8+ semaphores.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt

@@ -22,13 +22,11 @@ among others.
 
 Required properties:
 
-- compatible: Must be one or more of the following
-  - "ti,ds90c185" for the TI DS90C185 FPD-Link Serializer
-  - "lvds-encoder" for a generic LVDS encoder device
+- compatible: Must be "lvds-encoder"
 
-  When compatible with the generic version, nodes must list the
-  device-specific version corresponding to the device first
-  followed by the generic version.
+  Any encoder compatible with this generic binding, but with additional
+  properties not listed here, must list a device specific compatible first
+  followed by this generic compatible.
 
 Required nodes:
 
@@ -44,8 +42,6 @@ Example
 
 lvds-encoder {
 	compatible = "lvds-encoder";
-	#address-cells = <1>;
-	#size-cells = <0>;
 
 	ports {
 		#address-cells = <1>;

Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt

@@ -10,7 +10,7 @@ Required properties:
 
 Optional properties:
 
-- pwdn-gpios: Power down control GPIO
+- powerdown-gpios: Power down control GPIO (the /PWDN pin, active low).
 
 Required nodes:
 

Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt

+Texas Instruments FPD-Link (LVDS) Serializer
+--------------------------------------------
+
+The DS90C185 and DS90C187 are low-power serializers for portable
+battery-powered applications that reduces the size of the RGB
+interface between the host GPU and the display.
+
+Required properties:
+
+- compatible: Should be
+  "ti,ds90c185", "lvds-encoder"  for the TI DS90C185 FPD-Link Serializer
+  "ti,ds90c187", "lvds-encoder"  for the TI DS90C187 FPD-Link Serializer
+
+Optional properties:
+
+- powerdown-gpios: Power down control GPIO (the PDB pin, active-low)
+
+Required nodes:
+
+The devices have two video ports. Their connections are modeled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for parallel input
+- Video port 1 for LVDS output
+
+
+Example
+-------
+
+lvds-encoder {
+	compatible = "ti,ds90c185", "lvds-encoder";
+
+	powerdown-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			lvds_enc_in: endpoint {
+				remote-endpoint = <&lcdc_out_rgb>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lvds_enc_out: endpoint {
+				remote-endpoint = <&lvds_panel_in>;
+			};
+		};
+	};
+};

Documentation/gpu/todo.rst

@@ -82,30 +82,6 @@ events for atomic commits correctly. But fixing these bugs is good anyway.
 
 Contact: Daniel Vetter, respective driver maintainers
 
-Better manual-upload support for atomic
----------------------------------------
-
-This would be especially useful for tinydrm:
-
-- Add a struct drm_rect dirty_clip to drm_crtc_state. When duplicating the
-  crtc state, clear that to the max values, x/y = 0 and w/h = MAX_INT, in
-  __drm_atomic_helper_crtc_duplicate_state().
-
-- Move tinydrm_merge_clips into drm_framebuffer.c, dropping the tinydrm\_
-  prefix ofc and using drm_fb\_. drm_framebuffer.c makes sense since this
-  is a function useful to implement the fb->dirty function.
-
-- Create a new drm_fb_dirty function which does essentially what e.g.
-  mipi_dbi_fb_dirty does. You can use e.g. drm_atomic_helper_update_plane as the
-  template. But instead of doing a simple full-screen plane update, this new
-  helper also sets crtc_state->dirty_clip to the right coordinates. And of
-  course it needs to check whether the fb is actually active (and maybe where),
-  so there's some book-keeping involved. There's also some good fun involved in
-  scaling things appropriately. For that case we might simply give up and
-  declare the entire area covered by the plane as dirty.
-
-Contact: Noralf Trønnes, Daniel Vetter
-
 Fallout from atomic KMS
 -----------------------
 
@@ -459,21 +435,10 @@ those drivers as simple as possible, so lots of room for refactoring:
   one of the ideas for having a shared dsi/dbi helper, abstracting away the
   transport details more.
 
-- tinydrm_gem_cma_prime_import_sg_table should probably go into the cma
-  helpers, as a _vmapped variant (since not every driver needs the vmap).
-  And tinydrm_gem_cma_free_object could the be merged into
-  drm_gem_cma_free_object().
-
-- tinydrm_fb_create we could move into drm_simple_pipe, only need to add
-  the fb_create hook to drm_simple_pipe_funcs, which would again simplify a
-  bunch of things (since it gives you a one-stop vfunc for simple drivers).
-
 - Quick aside: The unregister devm stuff is kinda getting the lifetimes of
   a drm_device wrong. Doesn't matter, since everyone else gets it wrong
   too :-)
 
-- also rework the drm_framebuffer_funcs->dirty hook wire-up, see above.
-
 Contact: Noralf Trønnes, Daniel Vetter
 
 AMD DC Display Driver

drivers/gpu/drm/Kconfig

@@ -170,10 +170,6 @@ config DRM_KMS_CMA_HELPER
 	bool
 	depends on DRM
 	select DRM_GEM_CMA_HELPER
-	select DRM_KMS_FB_HELPER
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
 	help
 	  Choose this if you need the KMS CMA helper functions
 

drivers/gpu/drm/bridge/lvds-encoder.c

@@ -11,11 +11,13 @@
 #include <drm/drm_bridge.h>
 #include <drm/drm_panel.h>
 
+#include <linux/gpio/consumer.h>
 #include <linux/of_graph.h>
 
 struct lvds_encoder {
 	struct drm_bridge bridge;
 	struct drm_bridge *panel_bridge;
+	struct gpio_desc *powerdown_gpio;
 };
 
 static int lvds_encoder_attach(struct drm_bridge *bridge)
@@ -28,54 +30,85 @@ static int lvds_encoder_attach(struct drm_bridge *bridge)
 				 bridge);
 }
 
+static void lvds_encoder_enable(struct drm_bridge *bridge)
+{
+	struct lvds_encoder *lvds_encoder = container_of(bridge,
+							 struct lvds_encoder,
+							 bridge);
+
+	if (lvds_encoder->powerdown_gpio)
+		gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 0);
+}
+
+static void lvds_encoder_disable(struct drm_bridge *bridge)
+{
+	struct lvds_encoder *lvds_encoder = container_of(bridge,
+							 struct lvds_encoder,
+							 bridge);
+
+	if (lvds_encoder->powerdown_gpio)
+		gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 1);
+}
+
 static struct drm_bridge_funcs funcs = {
 	.attach = lvds_encoder_attach,
+	.enable = lvds_encoder_enable,
+	.disable = lvds_encoder_disable,
 };
 
 static int lvds_encoder_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct device_node *port;
 	struct device_node *endpoint;
 	struct device_node *panel_node;
 	struct drm_panel *panel;
 	struct lvds_encoder *lvds_encoder;
 
-	lvds_encoder = devm_kzalloc(&pdev->dev, sizeof(*lvds_encoder),
-				    GFP_KERNEL);
+	lvds_encoder = devm_kzalloc(dev, sizeof(*lvds_encoder), GFP_KERNEL);
 	if (!lvds_encoder)
 		return -ENOMEM;
 
+	lvds_encoder->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",
+							       GPIOD_OUT_HIGH);
+	if (IS_ERR(lvds_encoder->powerdown_gpio)) {
+		int err = PTR_ERR(lvds_encoder->powerdown_gpio);
+
+		if (err != -EPROBE_DEFER)
+			dev_err(dev, "powerdown GPIO failure: %d\n", err);
+		return err;
+	}
+
 	/* Locate the panel DT node. */
-	port = of_graph_get_port_by_id(pdev->dev.of_node, 1);
+	port = of_graph_get_port_by_id(dev->of_node, 1);
 	if (!port) {
-		dev_dbg(&pdev->dev, "port 1 not found\n");
+		dev_dbg(dev, "port 1 not found\n");
 		return -ENXIO;
 	}
 
 	endpoint = of_get_child_by_name(port, "endpoint");
 	of_node_put(port);
 	if (!endpoint) {
-		dev_dbg(&pdev->dev, "no endpoint for port 1\n");
+		dev_dbg(dev, "no endpoint for port 1\n");
 		return -ENXIO;
 	}
 
 	panel_node = of_graph_get_remote_port_parent(endpoint);
 	of_node_put(endpoint);
 	if (!panel_node) {
-		dev_dbg(&pdev->dev, "no remote endpoint for port 1\n");
+		dev_dbg(dev, "no remote endpoint for port 1\n");
 		return -ENXIO;
 	}
 
 	panel = of_drm_find_panel(panel_node);
 	of_node_put(panel_node);
 	if (IS_ERR(panel)) {
-		dev_dbg(&pdev->dev, "panel not found, deferring probe\n");
+		dev_dbg(dev, "panel not found, deferring probe\n");
 		return PTR_ERR(panel);
 	}
 
 	lvds_encoder->panel_bridge =
-		devm_drm_panel_bridge_add(&pdev->dev,
-					  panel, DRM_MODE_CONNECTOR_LVDS);
+		devm_drm_panel_bridge_add(dev, panel, DRM_MODE_CONNECTOR_LVDS);
 	if (IS_ERR(lvds_encoder->panel_bridge))
 		return PTR_ERR(lvds_encoder->panel_bridge);
 
@@ -83,7 +116,7 @@ static int lvds_encoder_probe(struct platform_device *pdev)
 	 * but we need a bridge attached to our of_node for our user
 	 * to look up.
 	 */
-	lvds_encoder->bridge.of_node = pdev->dev.of_node;
+	lvds_encoder->bridge.of_node = dev->of_node;
 	lvds_encoder->bridge.funcs = &funcs;
 	drm_bridge_add(&lvds_encoder->bridge);
 

drivers/gpu/drm/drm_damage_helper.c

@@ -333,3 +333,44 @@ drm_atomic_helper_damage_iter_next(struct drm_atomic_helper_damage_iter *iter,
 	return ret;
 }
 EXPORT_SYMBOL(drm_atomic_helper_damage_iter_next);
+
+/**
+ * drm_atomic_helper_damage_merged - Merged plane damage
+ * @old_state: Old plane state for validation.
+ * @state: Plane state from which to iterate the damage clips.
+ * @rect: Returns the merged damage rectangle
+ *
+ * This function merges any valid plane damage clips into one rectangle and
+ * returns it in @rect.
+ *
+ * For details see: drm_atomic_helper_damage_iter_init() and
+ * drm_atomic_helper_damage_iter_next().
+ *
+ * Returns:
+ * True if there is valid plane damage otherwise false.
+ */
+bool drm_atomic_helper_damage_merged(const struct drm_plane_state *old_state,
+				     struct drm_plane_state *state,
+				     struct drm_rect *rect)
+{
+	struct drm_atomic_helper_damage_iter iter;
+	struct drm_rect clip;
+	bool valid = false;
+
+	rect->x1 = INT_MAX;
+	rect->y1 = INT_MAX;
+	rect->x2 = 0;
+	rect->y2 = 0;
+
+	drm_atomic_helper_damage_iter_init(&iter, old_state, state);
+	drm_atomic_for_each_plane_damage(&iter, &clip) {
+		rect->x1 = min(rect->x1, clip.x1);
+		rect->y1 = min(rect->y1, clip.y1);
+		rect->x2 = max(rect->x2, clip.x2);
+		rect->y2 = max(rect->y2, clip.y2);
+		valid = true;
+	}
+
+	return valid;
+}
+EXPORT_SYMBOL(drm_atomic_helper_damage_merged);

drivers/gpu/drm/drm_dp_helper.c

@@ -194,11 +194,11 @@ drm_dp_dump_access(const struct drm_dp_aux *aux,
 	const char *arrow = request == DP_AUX_NATIVE_READ ? "->" : "<-";
 
 	if (ret > 0)
-		drm_dbg(DRM_UT_DP, "%s: 0x%05x AUX %s (ret=%3d) %*ph\n",
-			aux->name, offset, arrow, ret, min(ret, 20), buffer);
+		DRM_DEBUG_DP("%s: 0x%05x AUX %s (ret=%3d) %*ph\n",
+			     aux->name, offset, arrow, ret, min(ret, 20), buffer);
 	else
-		drm_dbg(DRM_UT_DP, "%s: 0x%05x AUX %s (ret=%3d)\n",
-			aux->name, offset, arrow, ret);
+		DRM_DEBUG_DP("%s: 0x%05x AUX %s (ret=%3d)\n",
+			     aux->name, offset, arrow, ret);
 }
 
 /**
@@ -887,7 +887,8 @@ static void drm_dp_i2c_msg_set_request(struct drm_dp_aux_msg *msg,
 {
 	msg->request = (i2c_msg->flags & I2C_M_RD) ?
 		DP_AUX_I2C_READ : DP_AUX_I2C_WRITE;
-	msg->request |= DP_AUX_I2C_MOT;
+	if (!(i2c_msg->flags & I2C_M_STOP))
+		msg->request |= DP_AUX_I2C_MOT;
 }
 
 /*

drivers/gpu/drm/drm_fb_cma_helper.c

@@ -17,20 +17,13 @@
  * GNU General Public License for more details.
  */
 
-#include <drm/drmP.h>
-#include <drm/drm_client.h>
-#include <drm/drm_fb_helper.h>
+#include <drm/drm_fourcc.h>
 #include <drm/drm_framebuffer.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
-#include <drm/drm_fb_cma_helper.h>
-#include <drm/drm_print.h>
+#include <drm/drm_plane.h>
 #include <linux/module.h>
 
-struct drm_fbdev_cma {
-	struct drm_fb_helper	fb_helper;
-};
-
 /**
  * DOC: framebuffer cma helper functions
  *
@@ -39,16 +32,8 @@ struct drm_fbdev_cma {
  *
  * drm_gem_fb_create() is used in the &drm_mode_config_funcs.fb_create
  * callback function to create a cma backed framebuffer.
- *
- * An fbdev framebuffer backed by cma is also available by calling
- * drm_fb_cma_fbdev_init(). drm_fb_cma_fbdev_fini() tears it down.
  */
 
-static inline struct drm_fbdev_cma *to_fbdev_cma(struct drm_fb_helper *helper)
-{
-	return container_of(helper, struct drm_fbdev_cma, fb_helper);
-}
-
 /**
  * drm_fb_cma_get_gem_obj() - Get CMA GEM object for framebuffer
  * @fb: The framebuffer
@@ -119,121 +104,3 @@ dma_addr_t drm_fb_cma_get_gem_addr(struct drm_framebuffer *fb,
 	return paddr;
 }
 EXPORT_SYMBOL_GPL(drm_fb_cma_get_gem_addr);
-
-/**
- * drm_fb_cma_fbdev_init() - Allocate and initialize fbdev emulation
- * @dev: DRM device
- * @preferred_bpp: Preferred bits per pixel for the device.
- *                 @dev->mode_config.preferred_depth is used if this is zero.
- * @max_conn_count: Maximum number of connectors.
- *                  @dev->mode_config.num_connector is used if this is zero.
- *
- * Returns:
- * Zero on success or negative error code on failure.
- */
-int drm_fb_cma_fbdev_init(struct drm_device *dev, unsigned int preferred_bpp,
-			  unsigned int max_conn_count)
-{
-	struct drm_fbdev_cma *fbdev_cma;
-
-	/* dev->fb_helper will indirectly point to fbdev_cma after this call */
-	fbdev_cma = drm_fbdev_cma_init(dev, preferred_bpp, max_conn_count);
-	return PTR_ERR_OR_ZERO(fbdev_cma);
-}
-EXPORT_SYMBOL_GPL(drm_fb_cma_fbdev_init);
-
-/**
- * drm_fb_cma_fbdev_fini() - Teardown fbdev emulation
- * @dev: DRM device
- */
-void drm_fb_cma_fbdev_fini(struct drm_device *dev)
-{
-	if (dev->fb_helper)
-		drm_fbdev_cma_fini(to_fbdev_cma(dev->fb_helper));
-}
-EXPORT_SYMBOL_GPL(drm_fb_cma_fbdev_fini);
-
-static const struct drm_fb_helper_funcs drm_fb_cma_helper_funcs = {
-	.fb_probe = drm_fb_helper_generic_probe,
-};
-
-/**
- * drm_fbdev_cma_init() - Allocate and initializes a drm_fbdev_cma struct
- * @dev: DRM device
- * @preferred_bpp: Preferred bits per pixel for the device
- * @max_conn_count: Maximum number of connectors
- *
- * Returns a newly allocated drm_fbdev_cma struct or a ERR_PTR.
- */
-struct drm_fbdev_cma *drm_fbdev_cma_init(struct drm_device *dev,
-	unsigned int preferred_bpp, unsigned int max_conn_count)
-{
-	struct drm_fbdev_cma *fbdev_cma;
-	struct drm_fb_helper *fb_helper;
-	int ret;
-
-	fbdev_cma = kzalloc(sizeof(*fbdev_cma), GFP_KERNEL);
-	if (!fbdev_cma)
-		return ERR_PTR(-ENOMEM);
-
-	fb_helper = &fbdev_cma->fb_helper;
-
-	ret = drm_client_init(dev, &fb_helper->client, "fbdev", NULL);
-	if (ret)
-		goto err_free;
-
-	ret = drm_fb_helper_fbdev_setup(dev, fb_helper, &drm_fb_cma_helper_funcs,
-					preferred_bpp, max_conn_count);
-	if (ret)
-		goto err_client_put;
-
-	drm_client_add(&fb_helper->client);
-
-	return fbdev_cma;
-
-err_client_put:
-	drm_client_release(&fb_helper->client);
-err_free:
-	kfree(fbdev_cma);
-
-	return ERR_PTR(ret);
-}
-EXPORT_SYMBOL_GPL(drm_fbdev_cma_init);
-
-/**
- * drm_fbdev_cma_fini() - Free drm_fbdev_cma struct
- * @fbdev_cma: The drm_fbdev_cma struct
- */
-void drm_fbdev_cma_fini(struct drm_fbdev_cma *fbdev_cma)
-{
-	drm_fb_helper_unregister_fbi(&fbdev_cma->fb_helper);
-	/* All resources have now been freed by drm_fbdev_fb_destroy() */
-}
-EXPORT_SYMBOL_GPL(drm_fbdev_cma_fini);
-
-/**
- * drm_fbdev_cma_restore_mode() - Restores initial framebuffer mode
- * @fbdev_cma: The drm_fbdev_cma struct, may be NULL
- *
- * This function is usually called from the &drm_driver.lastclose callback.
- */
-void drm_fbdev_cma_restore_mode(struct drm_fbdev_cma *fbdev_cma)
-{
-	if (fbdev_cma)
-		drm_fb_helper_restore_fbdev_mode_unlocked(&fbdev_cma->fb_helper);
-}
-EXPORT_SYMBOL_GPL(drm_fbdev_cma_restore_mode);
-
-/**
- * drm_fbdev_cma_hotplug_event() - Poll for hotpulug events
- * @fbdev_cma: The drm_fbdev_cma struct, may be NULL
- *
- * This function is usually called from the &drm_mode_config.output_poll_changed
- * callback.
- */
-void drm_fbdev_cma_hotplug_event(struct drm_fbdev_cma *fbdev_cma)
-{
-	if (fbdev_cma)
-		drm_fb_helper_hotplug_event(&fbdev_cma->fb_helper);
-}
-EXPORT_SYMBOL_GPL(drm_fbdev_cma_hotplug_event);

drivers/gpu/drm/drm_fb_helper.c

@@ -3042,16 +3042,8 @@ static void drm_fbdev_cleanup(struct drm_fb_helper *fb_helper)
 static void drm_fbdev_release(struct drm_fb_helper *fb_helper)
 {
 	drm_fbdev_cleanup(fb_helper);
-
-	/*
-	 * FIXME:
-	 * Remove conditional when all CMA drivers have been moved over to using
-	 * drm_fbdev_generic_setup().
-	 */
-	if (fb_helper->client.funcs) {
-		drm_client_release(&fb_helper->client);
-		kfree(fb_helper);
-	}
+	drm_client_release(&fb_helper->client);
+	kfree(fb_helper);
 }
 
 /*

drivers/gpu/drm/drm_gem_framebuffer_helper.c

@@ -17,6 +17,7 @@
 #include <drm/drmP.h>
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_uapi.h>
+#include <drm/drm_damage_helper.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_fourcc.h>
 #include <drm/drm_framebuffer.h>
@@ -136,10 +137,9 @@ EXPORT_SYMBOL(drm_gem_fb_create_handle);
  * @mode_cmd: Metadata from the userspace framebuffer creation request
  * @funcs: vtable to be used for the new framebuffer object
  *
- * This can be used to set &drm_framebuffer_funcs for drivers that need the
- * &drm_framebuffer_funcs.dirty callback. Use drm_gem_fb_create() if you don't
- * need to change &drm_framebuffer_funcs.
- * The function does buffer size validation.
+ * This function can be used to set &drm_framebuffer_funcs for drivers that need
+ * custom framebuffer callbacks. Use drm_gem_fb_create() if you don't need to
+ * change &drm_framebuffer_funcs. The function does buffer size validation.
  *
  * Returns:
  * Pointer to a &drm_framebuffer on success or an error pointer on failure.
@@ -215,8 +215,8 @@ static const struct drm_framebuffer_funcs drm_gem_fb_funcs = {
  *
  * If your hardware has special alignment or pitch requirements these should be
  * checked before calling this function. The function does buffer size
- * validation. Use drm_gem_fb_create_with_funcs() if you need to set
- * &drm_framebuffer_funcs.dirty.
+ * validation. Use drm_gem_fb_create_with_dirty() if you need framebuffer
+ * flushing.
  *
  * Drivers can use this as their &drm_mode_config_funcs.fb_create callback.
  * The ADDFB2 IOCTL calls into this callback.
@@ -233,6 +233,44 @@ drm_gem_fb_create(struct drm_device *dev, struct drm_file *file,
 }
 EXPORT_SYMBOL_GPL(drm_gem_fb_create);
 
+static const struct drm_framebuffer_funcs drm_gem_fb_funcs_dirtyfb = {
+	.destroy	= drm_gem_fb_destroy,
+	.create_handle	= drm_gem_fb_create_handle,
+	.dirty		= drm_atomic_helper_dirtyfb,
+};
+
+/**
+ * drm_gem_fb_create_with_dirty() - Helper function for the
+ *                       &drm_mode_config_funcs.fb_create callback
+ * @dev: DRM device
+ * @file: DRM file that holds the GEM handle(s) backing the framebuffer
+ * @mode_cmd: Metadata from the userspace framebuffer creation request
+ *
+ * This function creates a new framebuffer object described by
+ * &drm_mode_fb_cmd2. This description includes handles for the buffer(s)
+ * backing the framebuffer. drm_atomic_helper_dirtyfb() is used for the dirty
+ * callback giving framebuffer flushing through the atomic machinery. Use
+ * drm_gem_fb_create() if you don't need the dirty callback.
+ * The function does buffer size validation.
+ *
+ * Drivers should also call drm_plane_enable_fb_damage_clips() on all planes
+ * to enable userspace to use damage clips also with the ATOMIC IOCTL.
+ *
+ * Drivers can use this as their &drm_mode_config_funcs.fb_create callback.
+ * The ADDFB2 IOCTL calls into this callback.
+ *
+ * Returns:
+ * Pointer to a &drm_framebuffer on success or an error pointer on failure.
+ */
+struct drm_framebuffer *
+drm_gem_fb_create_with_dirty(struct drm_device *dev, struct drm_file *file,
+			     const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+	return drm_gem_fb_create_with_funcs(dev, file, mode_cmd,
+					    &drm_gem_fb_funcs_dirtyfb);
+}
+EXPORT_SYMBOL_GPL(drm_gem_fb_create_with_dirty);
+
 /**
  * drm_gem_fb_prepare_fb() - Prepare a GEM backed framebuffer
  * @plane: Plane

drivers/gpu/drm/panel/panel-innolux-p079zca.c

@@ -70,18 +70,12 @@ static inline struct innolux_panel *to_innolux_panel(struct drm_panel *panel)
 static int innolux_panel_disable(struct drm_panel *panel)
 {
 	struct innolux_panel *innolux = to_innolux_panel(panel);
-	int err;
 
 	if (!innolux->enabled)
 		return 0;
 
 	backlight_disable(innolux->backlight);
 
-	err = mipi_dsi_dcs_set_display_off(innolux->link);
-	if (err < 0)
-		DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
-			      err);
-
 	innolux->enabled = false;
 
 	return 0;
@@ -95,6 +89,11 @@ static int innolux_panel_unprepare(struct drm_panel *panel)
 	if (!innolux->prepared)
 		return 0;
 
+	err = mipi_dsi_dcs_set_display_off(innolux->link);
+	if (err < 0)
+		DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
+			      err);
+
 	err = mipi_dsi_dcs_enter_sleep_mode(innolux->link);
 	if (err < 0) {
 		DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",

drivers/gpu/drm/stm/ltdc.c

@@ -691,7 +691,7 @@ static int ltdc_plane_atomic_check(struct drm_plane *plane,
 				   struct drm_plane_state *state)
 {
 	struct drm_framebuffer *fb = state->fb;
-	u32 src_x, src_y, src_w, src_h;
+	u32 src_w, src_h;
 
 	DRM_DEBUG_DRIVER("\n");
 
@@ -699,8 +699,6 @@ static int ltdc_plane_atomic_check(struct drm_plane *plane,
 		return 0;
 
 	/* convert src_ from 16:16 format */
-	src_x = state->src_x >> 16;
-	src_y = state->src_y >> 16;
 	src_w = state->src_w >> 16;
 	src_h = state->src_h >> 16;
 

drivers/gpu/drm/sun4i/sun4i_backend.c

@@ -45,28 +45,6 @@ static const u32 sunxi_rgb2yuv_coef[12] = {
 	0x000001c1, 0x00003e88, 0x00003fb8, 0x00000808
 };
 
-/*
- * These coefficients are taken from the A33 BSP from Allwinner.
- *
- * The first three values of each row are coded as 13-bit signed fixed-point
- * numbers, with 10 bits for the fractional part. The fourth value is a
- * constant coded as a 14-bit signed fixed-point number with 4 bits for the
- * fractional part.
- *
- * The values in table order give the following colorspace translation:
- * G = 1.164 * Y - 0.391 * U - 0.813 * V + 135
- * R = 1.164 * Y + 1.596 * V - 222
- * B = 1.164 * Y + 2.018 * U + 276
- *
- * This seems to be a conversion from Y[16:235] UV[16:240] to RGB[0:255],
- * following the BT601 spec.
- */
-static const u32 sunxi_bt601_yuv2rgb_coef[12] = {
-	0x000004a7, 0x00001e6f, 0x00001cbf, 0x00000877,
-	0x000004a7, 0x00000000, 0x00000662, 0x00003211,
-	0x000004a7, 0x00000812, 0x00000000, 0x00002eb1,
-};
-
 static void sun4i_backend_apply_color_correction(struct sunxi_engine *engine)
 {
 	int i;
@@ -245,7 +223,8 @@ static int sun4i_backend_update_yuv_format(struct sun4i_backend *backend,
 			   SUN4I_BACKEND_ATTCTL_REG0_LAY_YUVEN);
 
 	/* TODO: Add support for the multi-planar YUV formats */
-	if (format->num_planes == 1)
+	if (drm_format_info_is_yuv_packed(format) &&
+	    drm_format_info_is_yuv_sampling_422(format))
 		val |= SUN4I_BACKEND_IYUVCTL_FBFMT_PACKED_YUV422;
 	else
 		DRM_DEBUG_DRIVER("Unsupported YUV format (0x%x)\n", fmt);

drivers/gpu/drm/sun4i/sun4i_drv.c

@@ -97,6 +97,7 @@ static int sun4i_drv_bind(struct device *dev)
 	}
 
 	drm_mode_config_init(drm);
+	drm->mode_config.allow_fb_modifiers = true;
 
 	ret = component_bind_all(drm->dev, drm);
 	if (ret) {

drivers/gpu/drm/sun4i/sun4i_frontend.c

@@ -10,6 +10,7 @@
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -48,10 +49,38 @@ static const u32 sun4i_frontend_horz_coef[64] = {
 	0x03ff0000, 0x0000fd41, 0x01ff0000, 0x0000fe42,
 };
 
+/*
+ * These coefficients are taken from the A33 BSP from Allwinner.
+ *
+ * The first three values of each row are coded as 13-bit signed fixed-point
+ * numbers, with 10 bits for the fractional part. The fourth value is a
+ * constant coded as a 14-bit signed fixed-point number with 4 bits for the
+ * fractional part.
+ *
+ * The values in table order give the following colorspace translation:
+ * G = 1.164 * Y - 0.391 * U - 0.813 * V + 135
+ * R = 1.164 * Y + 1.596 * V - 222
+ * B = 1.164 * Y + 2.018 * U + 276
+ *
+ * This seems to be a conversion from Y[16:235] UV[16:240] to RGB[0:255],
+ * following the BT601 spec.
+ */
+const u32 sunxi_bt601_yuv2rgb_coef[12] = {
+	0x000004a7, 0x00001e6f, 0x00001cbf, 0x00000877,
+	0x000004a7, 0x00000000, 0x00000662, 0x00003211,
+	0x000004a7, 0x00000812, 0x00000000, 0x00002eb1,
+};
+EXPORT_SYMBOL(sunxi_bt601_yuv2rgb_coef);
+
 static void sun4i_frontend_scaler_init(struct sun4i_frontend *frontend)
 {
 	int i;
 
+	if (frontend->data->has_coef_access_ctrl)
+		regmap_write_bits(frontend->regs, SUN4I_FRONTEND_FRM_CTRL_REG,
+				  SUN4I_FRONTEND_FRM_CTRL_COEF_ACCESS_CTRL,
+				  SUN4I_FRONTEND_FRM_CTRL_COEF_ACCESS_CTRL);
+
 	for (i = 0; i < 32; i++) {
 		regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZCOEF0_REG(i),
 			     sun4i_frontend_horz_coef[2 * i]);
@@ -67,9 +96,11 @@ static void sun4i_frontend_scaler_init(struct sun4i_frontend *frontend)
 			     sun4i_frontend_vert_coef[i]);
 	}
 
-	regmap_update_bits(frontend->regs, SUN4I_FRONTEND_FRM_CTRL_REG,
-			   SUN4I_FRONTEND_FRM_CTRL_COEF_ACCESS_CTRL,
-			   SUN4I_FRONTEND_FRM_CTRL_COEF_ACCESS_CTRL);
+	if (frontend->data->has_coef_rdy)
+		regmap_write_bits(frontend->regs,
+				  SUN4I_FRONTEND_FRM_CTRL_REG,
+				  SUN4I_FRONTEND_FRM_CTRL_COEF_RDY,
+				  SUN4I_FRONTEND_FRM_CTRL_COEF_RDY);
 }
 
 int sun4i_frontend_init(struct sun4i_frontend *frontend)
@@ -84,59 +115,228 @@ void sun4i_frontend_exit(struct sun4i_frontend *frontend)
 }
 EXPORT_SYMBOL(sun4i_frontend_exit);
 
+static bool sun4i_frontend_format_chroma_requires_swap(uint32_t fmt)
+{
+	switch (fmt) {
+	case DRM_FORMAT_YVU411:
+	case DRM_FORMAT_YVU420:
+	case DRM_FORMAT_YVU422:
+	case DRM_FORMAT_YVU444:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static bool sun4i_frontend_format_supports_tiling(uint32_t fmt)
+{
+	switch (fmt) {
+	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_NV16:
+	case DRM_FORMAT_NV21:
+	case DRM_FORMAT_NV61:
+	case DRM_FORMAT_YUV411:
+	case DRM_FORMAT_YUV420:
+	case DRM_FORMAT_YUV422:
+	case DRM_FORMAT_YVU420:
+	case DRM_FORMAT_YVU422:
+	case DRM_FORMAT_YVU411:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
 void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
 				  struct drm_plane *plane)
 {
 	struct drm_plane_state *state = plane->state;
 	struct drm_framebuffer *fb = state->fb;
+	unsigned int strides[3] = {};
+
 	dma_addr_t paddr;
+	bool swap;
+
+	if (fb->modifier == DRM_FORMAT_MOD_ALLWINNER_TILED) {
+		unsigned int width = state->src_w >> 16;
+		unsigned int offset;
+
+		strides[0] = SUN4I_FRONTEND_LINESTRD_TILED(fb->pitches[0]);
+
+		/*
+		 * The X1 offset is the offset to the bottom-right point in the
+		 * end tile, which is the final pixel (at offset width - 1)
+		 * within the end tile (with a 32-byte mask).
+		 */
+		offset = (width - 1) & (32 - 1);
+
+		regmap_write(frontend->regs, SUN4I_FRONTEND_TB_OFF0_REG,
+			     SUN4I_FRONTEND_TB_OFF_X1(offset));
+
+		if (fb->format->num_planes > 1) {
+			strides[1] =
+				SUN4I_FRONTEND_LINESTRD_TILED(fb->pitches[1]);
+
+			regmap_write(frontend->regs, SUN4I_FRONTEND_TB_OFF1_REG,
+				     SUN4I_FRONTEND_TB_OFF_X1(offset));
+		}
+
+		if (fb->format->num_planes > 2) {
+			strides[2] =
+				SUN4I_FRONTEND_LINESTRD_TILED(fb->pitches[2]);
+
+			regmap_write(frontend->regs, SUN4I_FRONTEND_TB_OFF2_REG,
+				     SUN4I_FRONTEND_TB_OFF_X1(offset));
+		}
+	} else {
+		strides[0] = fb->pitches[0];
+
+		if (fb->format->num_planes > 1)
+			strides[1] = fb->pitches[1];
+
+		if (fb->format->num_planes > 2)
+			strides[2] = fb->pitches[2];
+	}
 
 	/* Set the line width */
 	DRM_DEBUG_DRIVER("Frontend stride: %d bytes\n", fb->pitches[0]);
 	regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD0_REG,
-		     fb->pitches[0]);
+		     strides[0]);
+
+	if (fb->format->num_planes > 1)
+		regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD1_REG,
+			     strides[1]);
+
+	if (fb->format->num_planes > 2)
+		regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD2_REG,
+			     strides[2]);
+
+	/* Some planar formats require chroma channel swapping by hand. */
+	swap = sun4i_frontend_format_chroma_requires_swap(fb->format->format);
 
 	/* Set the physical address of the buffer in memory */
 	paddr = drm_fb_cma_get_gem_addr(fb, state, 0);
 	paddr -= PHYS_OFFSET;
-	DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &paddr);
+	DRM_DEBUG_DRIVER("Setting buffer #0 address to %pad\n", &paddr);
 	regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR0_REG, paddr);
+
+	if (fb->format->num_planes > 1) {
+		paddr = drm_fb_cma_get_gem_addr(fb, state, swap ? 2 : 1);
+		paddr -= PHYS_OFFSET;
+		DRM_DEBUG_DRIVER("Setting buffer #1 address to %pad\n", &paddr);
+		regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR1_REG,
+			     paddr);
+	}
+
+	if (fb->format->num_planes > 2) {
+		paddr = drm_fb_cma_get_gem_addr(fb, state, swap ? 1 : 2);
+		paddr -= PHYS_OFFSET;
+		DRM_DEBUG_DRIVER("Setting buffer #2 address to %pad\n", &paddr);
+		regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR2_REG,
+			     paddr);
+	}
 }
 EXPORT_SYMBOL(sun4i_frontend_update_buffer);
 
-static int sun4i_frontend_drm_format_to_input_fmt(uint32_t fmt, u32 *val)
+static int
+sun4i_frontend_drm_format_to_input_fmt(const struct drm_format_info *format,
+				       u32 *val)
 {
-	switch (fmt) {
-	case DRM_FORMAT_XRGB8888:
+	if (!format->is_yuv)
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_RGB;
-		return 0;
-
-	default:
+	else if (drm_format_info_is_yuv_sampling_411(format))
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV411;
+	else if (drm_format_info_is_yuv_sampling_420(format))
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV420;
+	else if (drm_format_info_is_yuv_sampling_422(format))
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV422;
+	else if (drm_format_info_is_yuv_sampling_444(format))
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV444;
+	else
 		return -EINVAL;
-	}
+
+	return 0;
 }
 
-static int sun4i_frontend_drm_format_to_input_mode(uint32_t fmt, u32 *val)
+static int
+sun4i_frontend_drm_format_to_input_mode(const struct drm_format_info *format,
+					uint64_t modifier, u32 *val)
 {
-	if (drm_format_num_planes(fmt) == 1)
+	bool tiled = (modifier == DRM_FORMAT_MOD_ALLWINNER_TILED);
+
+	switch (format->num_planes) {
+	case 1:
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PACKED;
-	else
-		return -EINVAL;
+		return 0;
 
-	return 0;
+	case 2:
+		*val = tiled ? SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_MB32_SEMIPLANAR
+			     : SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_SEMIPLANAR;
+		return 0;
+
+	case 3:
+		*val = tiled ? SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_MB32_PLANAR
+			     : SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PLANAR;
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
 }
 
-static int sun4i_frontend_drm_format_to_input_sequence(uint32_t fmt, u32 *val)
+static int
+sun4i_frontend_drm_format_to_input_sequence(const struct drm_format_info *format,
+					    u32 *val)
 {
-	switch (fmt) {
+	/* Planar formats have an explicit input sequence. */
+	if (drm_format_info_is_yuv_planar(format)) {
+		*val = 0;
+		return 0;
+	}
+
+	switch (format->format) {
 	case DRM_FORMAT_BGRX8888:
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_BGRX;
 		return 0;
 
+	case DRM_FORMAT_NV12:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UV;
+		return 0;
+
+	case DRM_FORMAT_NV16:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UV;
+		return 0;
+
+	case DRM_FORMAT_NV21:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VU;
+		return 0;
+
+	case DRM_FORMAT_NV61:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VU;
+		return 0;
+
+	case DRM_FORMAT_UYVY:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UYVY;
+		return 0;
+
+	case DRM_FORMAT_VYUY:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VYUY;
+		return 0;
+
 	case DRM_FORMAT_XRGB8888:
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_XRGB;
 		return 0;
 
+	case DRM_FORMAT_YUYV:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_YUYV;
+		return 0;
+
+	case DRM_FORMAT_YVYU:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_YVYU;
+		return 0;
+
 	default:
 		return -EINVAL;
 	}
@@ -160,14 +360,32 @@ static int sun4i_frontend_drm_format_to_output_fmt(uint32_t fmt, u32 *val)
 
 static const uint32_t sun4i_frontend_formats[] = {
 	DRM_FORMAT_BGRX8888,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV21,
+	DRM_FORMAT_NV61,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
 	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_YUV411,
+	DRM_FORMAT_YUV420,
+	DRM_FORMAT_YUV422,
+	DRM_FORMAT_YUV444,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVU411,
+	DRM_FORMAT_YVU420,
+	DRM_FORMAT_YVU422,
+	DRM_FORMAT_YVU444,
+	DRM_FORMAT_YVYU,
 };
 
 bool sun4i_frontend_format_is_supported(uint32_t fmt, uint64_t modifier)
 {
 	unsigned int i;
 
-	if (modifier != DRM_FORMAT_MOD_LINEAR)
+	if (modifier == DRM_FORMAT_MOD_ALLWINNER_TILED)
+		return sun4i_frontend_format_supports_tiling(fmt);
+	else if (modifier != DRM_FORMAT_MOD_LINEAR)
 		return false;
 
 	for (i = 0; i < ARRAY_SIZE(sun4i_frontend_formats); i++)
@@ -183,9 +401,12 @@ int sun4i_frontend_update_formats(struct sun4i_frontend *frontend,
 {
 	struct drm_plane_state *state = plane->state;
 	struct drm_framebuffer *fb = state->fb;
-	uint32_t format = fb->format->format;
+	const struct drm_format_info *format = fb->format;
+	uint64_t modifier = fb->modifier;
 	u32 out_fmt_val;
 	u32 in_fmt_val, in_mod_val, in_ps_val;
+	unsigned int i;
+	u32 bypass;
 	int ret;
 
 	ret = sun4i_frontend_drm_format_to_input_fmt(format, &in_fmt_val);
@@ -194,7 +415,8 @@ int sun4i_frontend_update_formats(struct sun4i_frontend *frontend,
 		return ret;
 	}
 
-	ret = sun4i_frontend_drm_format_to_input_mode(format, &in_mod_val);
+	ret = sun4i_frontend_drm_format_to_input_mode(format, modifier,
+						      &in_mod_val);
 	if (ret) {
 		DRM_DEBUG_DRIVER("Invalid input mode\n");
 		return ret;
@@ -216,16 +438,39 @@ int sun4i_frontend_update_formats(struct sun4i_frontend *frontend,
 	 * I have no idea what this does exactly, but it seems to be
 	 * related to the scaler FIR filter phase parameters.
 	 */
-	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZPHASE_REG, 0x400);
-	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZPHASE_REG, 0x400);
-	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE0_REG, 0x400);
-	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE0_REG, 0x400);
-	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE1_REG, 0x400);
-	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE1_REG, 0x400);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZPHASE_REG,
+		     frontend->data->ch_phase[0].horzphase);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZPHASE_REG,
+		     frontend->data->ch_phase[1].horzphase);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE0_REG,
+		     frontend->data->ch_phase[0].vertphase[0]);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE0_REG,
+		     frontend->data->ch_phase[1].vertphase[0]);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE1_REG,
+		     frontend->data->ch_phase[0].vertphase[1]);
+	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE1_REG,
+		     frontend->data->ch_phase[1].vertphase[1]);
+
+	/*
+	 * Checking the input format is sufficient since we currently only
+	 * support RGB output formats to the backend. If YUV output formats
+	 * ever get supported, an YUV input and output would require bypassing
+	 * the CSC engine too.
+	 */
+	if (format->is_yuv) {
+		/* Setup the CSC engine for YUV to RGB conversion. */
+		bypass = 0;
+
+		for (i = 0; i < ARRAY_SIZE(sunxi_bt601_yuv2rgb_coef); i++)
+			regmap_write(frontend->regs,
+				     SUN4I_FRONTEND_CSC_COEF_REG(i),
+				     sunxi_bt601_yuv2rgb_coef[i]);
+	} else {
+		bypass = SUN4I_FRONTEND_BYPASS_CSC_EN;
+	}
 
 	regmap_update_bits(frontend->regs, SUN4I_FRONTEND_BYPASS_REG,
-			   SUN4I_FRONTEND_BYPASS_CSC_EN,
-			   SUN4I_FRONTEND_BYPASS_CSC_EN);
+			   SUN4I_FRONTEND_BYPASS_CSC_EN, bypass);
 
 	regmap_write(frontend->regs, SUN4I_FRONTEND_INPUT_FMT_REG,
 		     in_mod_val | in_fmt_val | in_ps_val);
@@ -321,6 +566,10 @@ static int sun4i_frontend_bind(struct device *dev, struct device *master,
 	frontend->dev = dev;
 	frontend->node = dev->of_node;
 
+	frontend->data = of_device_get_match_data(dev);
+	if (!frontend->data)
+		return -ENODEV;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	regs = devm_ioremap_resource(dev, res);
 	if (IS_ERR(regs))
@@ -433,8 +682,47 @@ static const struct dev_pm_ops sun4i_frontend_pm_ops = {
 	.runtime_suspend	= sun4i_frontend_runtime_suspend,
 };
 
+static const struct sun4i_frontend_data sun4i_a10_frontend = {
+	.ch_phase		= {
+		{
+			.horzphase = 0,
+			.vertphase = { 0, 0 },
+		},
+		{
+			.horzphase = 0xfc000,
+			.vertphase = { 0xfc000, 0xfc000 },
+		},
+	},
+	.has_coef_rdy		= true,
+};
+
+static const struct sun4i_frontend_data sun8i_a33_frontend = {
+	.ch_phase		= {
+		{
+			.horzphase = 0x400,
+			.vertphase = { 0x400, 0x400 },
+		},
+		{
+			.horzphase = 0x400,
+			.vertphase = { 0x400, 0x400 },
+		},
+	},
+	.has_coef_access_ctrl	= true,
+};
+
 const struct of_device_id sun4i_frontend_of_table[] = {
-	{ .compatible = "allwinner,sun8i-a33-display-frontend" },
+	{
+		.compatible = "allwinner,sun4i-a10-display-frontend",
+		.data = &sun4i_a10_frontend
+	},
+	{
+		.compatible = "allwinner,sun7i-a20-display-frontend",
+		.data = &sun4i_a10_frontend
+	},
+	{
+		.compatible = "allwinner,sun8i-a33-display-frontend",
+		.data = &sun8i_a33_frontend
+	},
 	{ }
 };
 EXPORT_SYMBOL(sun4i_frontend_of_table);

drivers/gpu/drm/sun4i/sun4i_frontend.h

@@ -22,12 +22,49 @@
 #define SUN4I_FRONTEND_BYPASS_CSC_EN			BIT(1)
 
 #define SUN4I_FRONTEND_BUF_ADDR0_REG		0x020
+#define SUN4I_FRONTEND_BUF_ADDR1_REG		0x024
+#define SUN4I_FRONTEND_BUF_ADDR2_REG		0x028
+
+#define SUN4I_FRONTEND_TB_OFF0_REG		0x030
+#define SUN4I_FRONTEND_TB_OFF1_REG		0x034
+#define SUN4I_FRONTEND_TB_OFF2_REG		0x038
+#define SUN4I_FRONTEND_TB_OFF_X1(x1)			((x1) << 16)
+#define SUN4I_FRONTEND_TB_OFF_Y0(y0)			((y0) << 8)
+#define SUN4I_FRONTEND_TB_OFF_X0(x0)			(x0)
 
 #define SUN4I_FRONTEND_LINESTRD0_REG		0x040
+#define SUN4I_FRONTEND_LINESTRD1_REG		0x044
+#define SUN4I_FRONTEND_LINESTRD2_REG		0x048
+
+/*
+ * In tiled mode, the stride is defined as the distance between the start of the
+ * end line of the current tile and the start of the first line in the next
+ * vertical tile.
+ *
+ * Tiles are represented in row-major order, thus the end line of current tile
+ * starts at: 31 * 32 (31 lines of 32 cols), the next vertical tile starts at:
+ * 32-bit-aligned-width * 32 and the distance is:
+ * 32 * (32-bit-aligned-width - 31).
+ */
+#define SUN4I_FRONTEND_LINESTRD_TILED(stride)		(((stride) - 31) * 32)
 
 #define SUN4I_FRONTEND_INPUT_FMT_REG		0x04c
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PLANAR	(0 << 8)
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PACKED	(1 << 8)
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_SEMIPLANAR	(2 << 8)
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_MB32_PLANAR	(4 << 8)
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_MB32_SEMIPLANAR (6 << 8)
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV444	(0 << 4)
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV422	(1 << 4)
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV420	(2 << 4)
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV411	(3 << 4)
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_RGB		(5 << 4)
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UYVY		0
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_YUYV		1
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VYUY		2
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_YVYU		3
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UV		0
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VU		1
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_BGRX		0
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_XRGB		1
 
@@ -35,6 +72,8 @@
 #define SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT_BGRX8888	1
 #define SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT_XRGB8888	2
 
+#define SUN4I_FRONTEND_CSC_COEF_REG(c)		(0x070 + (0x4 * (c)))
+
 #define SUN4I_FRONTEND_CH0_INSIZE_REG		0x100
 #define SUN4I_FRONTEND_INSIZE(h, w)			((((h) - 1) << 16) | (((w) - 1)))
 
@@ -73,6 +112,16 @@ struct drm_plane;
 struct regmap;
 struct reset_control;
 
+struct sun4i_frontend_data {
+	bool	has_coef_access_ctrl;
+	bool	has_coef_rdy;
+
+	struct {
+		u32	horzphase;
+		u32	vertphase[2];
+	} ch_phase[2];
+};
+
 struct sun4i_frontend {
 	struct list_head	list;
 	struct device		*dev;
@@ -83,9 +132,12 @@ struct sun4i_frontend {
 	struct clk		*ram_clk;
 	struct regmap		*regs;
 	struct reset_control	*reset;
+
+	const struct sun4i_frontend_data	*data;
 };
 
 extern const struct of_device_id sun4i_frontend_of_table[];
+extern const u32 sunxi_bt601_yuv2rgb_coef[12];
 
 int sun4i_frontend_init(struct sun4i_frontend *frontend);
 void sun4i_frontend_exit(struct sun4i_frontend *frontend);

drivers/gpu/drm/sun4i/sun4i_layer.c

@@ -114,6 +114,13 @@ static void sun4i_backend_layer_atomic_update(struct drm_plane *plane,
 	sun4i_backend_layer_enable(backend, layer->id, true);
 }
 
+static bool sun4i_layer_format_mod_supported(struct drm_plane *plane,
+					     uint32_t format, uint64_t modifier)
+{
+	return sun4i_backend_format_is_supported(format, modifier) ||
+	       sun4i_frontend_format_is_supported(format, modifier);
+}
+
 static const struct drm_plane_helper_funcs sun4i_backend_layer_helper_funcs = {
 	.prepare_fb	= drm_gem_fb_prepare_fb,
 	.atomic_disable	= sun4i_backend_layer_atomic_disable,
@@ -127,6 +134,7 @@ static const struct drm_plane_funcs sun4i_backend_layer_funcs = {
 	.disable_plane		= drm_atomic_helper_disable_plane,
 	.reset			= sun4i_backend_layer_reset,
 	.update_plane		= drm_atomic_helper_update_plane,
+	.format_mod_supported	= sun4i_layer_format_mod_supported,
 };
 
 static const uint32_t sun4i_layer_formats[] = {
@@ -138,13 +146,31 @@ static const uint32_t sun4i_layer_formats[] = {
 	DRM_FORMAT_RGBA4444,
 	DRM_FORMAT_RGB888,
 	DRM_FORMAT_RGB565,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV21,
+	DRM_FORMAT_NV61,
 	DRM_FORMAT_UYVY,
 	DRM_FORMAT_VYUY,
 	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_YUV411,
+	DRM_FORMAT_YUV420,
+	DRM_FORMAT_YUV422,
+	DRM_FORMAT_YUV444,
 	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVU411,
+	DRM_FORMAT_YVU420,
+	DRM_FORMAT_YVU422,
+	DRM_FORMAT_YVU444,
 	DRM_FORMAT_YVYU,
 };
 
+static const uint64_t sun4i_layer_modifiers[] = {
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_ALLWINNER_TILED,
+	DRM_FORMAT_MOD_INVALID
+};
+
 static struct sun4i_layer *sun4i_layer_init_one(struct drm_device *drm,
 						struct sun4i_backend *backend,
 						enum drm_plane_type type)
@@ -161,7 +187,7 @@ static struct sun4i_layer *sun4i_layer_init_one(struct drm_device *drm,
 				       &sun4i_backend_layer_funcs,
 				       sun4i_layer_formats,
 				       ARRAY_SIZE(sun4i_layer_formats),
-				       NULL, type, NULL);
+				       sun4i_layer_modifiers, type, NULL);
 	if (ret) {
 		dev_err(drm->dev, "Couldn't initialize layer\n");
 		return ERR_PTR(ret);

drivers/gpu/drm/tinydrm/core/tinydrm-core.c

@@ -39,31 +39,17 @@
  * and registers the DRM device using devm_tinydrm_register().
  */
 
-static struct drm_framebuffer *
-tinydrm_fb_create(struct drm_device *drm, struct drm_file *file_priv,
-		  const struct drm_mode_fb_cmd2 *mode_cmd)
-{
-	struct tinydrm_device *tdev = drm->dev_private;
-
-	return drm_gem_fb_create_with_funcs(drm, file_priv, mode_cmd,
-					    tdev->fb_funcs);
-}
-
 static const struct drm_mode_config_funcs tinydrm_mode_config_funcs = {
-	.fb_create = tinydrm_fb_create,
+	.fb_create = drm_gem_fb_create_with_dirty,
 	.atomic_check = drm_atomic_helper_check,
 	.atomic_commit = drm_atomic_helper_commit,
 };
 
 static int tinydrm_init(struct device *parent, struct tinydrm_device *tdev,
-			const struct drm_framebuffer_funcs *fb_funcs,
 			struct drm_driver *driver)
 {
 	struct drm_device *drm;
 
-	mutex_init(&tdev->dirty_lock);
-	tdev->fb_funcs = fb_funcs;
-
 	/*
 	 * We don't embed drm_device, because that prevent us from using
 	 * devm_kzalloc() to allocate tinydrm_device in the driver since
@@ -86,7 +72,6 @@ static int tinydrm_init(struct device *parent, struct tinydrm_device *tdev,
 static void tinydrm_fini(struct tinydrm_device *tdev)
 {
 	drm_mode_config_cleanup(tdev->drm);
-	mutex_destroy(&tdev->dirty_lock);
 	tdev->drm->dev_private = NULL;
 	drm_dev_put(tdev->drm);
 }
@@ -100,7 +85,6 @@ static void devm_tinydrm_release(void *data)
  * devm_tinydrm_init - Initialize tinydrm device
  * @parent: Parent device object
  * @tdev: tinydrm device
- * @fb_funcs: Framebuffer functions
  * @driver: DRM driver
  *
  * This function initializes @tdev, the underlying DRM device and it's
@@ -111,12 +95,11 @@ static void devm_tinydrm_release(void *data)
  * Zero on success, negative error code on failure.
  */
 int devm_tinydrm_init(struct device *parent, struct tinydrm_device *tdev,
-		      const struct drm_framebuffer_funcs *fb_funcs,
 		      struct drm_driver *driver)
 {
 	int ret;
 
-	ret = tinydrm_init(parent, tdev, fb_funcs, driver);
+	ret = tinydrm_init(parent, tdev, driver);
 	if (ret)
 		return ret;
 

drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c

@@ -17,103 +17,15 @@
 #include <drm/drm_device.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_fourcc.h>
+#include <drm/drm_framebuffer.h>
 #include <drm/drm_print.h>
-#include <drm/tinydrm/tinydrm.h>
+#include <drm/drm_rect.h>
 #include <drm/tinydrm/tinydrm-helpers.h>
-#include <uapi/drm/drm.h>
 
 static unsigned int spi_max;
 module_param(spi_max, uint, 0400);
 MODULE_PARM_DESC(spi_max, "Set a lower SPI max transfer size");
 
-/**
- * tinydrm_merge_clips - Merge clip rectangles
- * @dst: Destination clip rectangle
- * @src: Source clip rectangle(s)
- * @num_clips: Number of @src clip rectangles
- * @flags: Dirty fb ioctl flags
- * @max_width: Maximum width of @dst
- * @max_height: Maximum height of @dst
- *
- * This function merges @src clip rectangle(s) into @dst. If @src is NULL,
- * @max_width and @min_width is used to set a full @dst clip rectangle.
- *
- * Returns:
- * true if it's a full clip, false otherwise
- */
-bool tinydrm_merge_clips(struct drm_clip_rect *dst,
-			 struct drm_clip_rect *src, unsigned int num_clips,
-			 unsigned int flags, u32 max_width, u32 max_height)
-{
-	unsigned int i;
-
-	if (!src || !num_clips) {
-		dst->x1 = 0;
-		dst->x2 = max_width;
-		dst->y1 = 0;
-		dst->y2 = max_height;
-		return true;
-	}
-
-	dst->x1 = ~0;
-	dst->y1 = ~0;
-	dst->x2 = 0;
-	dst->y2 = 0;
-
-	for (i = 0; i < num_clips; i++) {
-		if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY)
-			i++;
-		dst->x1 = min(dst->x1, src[i].x1);
-		dst->x2 = max(dst->x2, src[i].x2);
-		dst->y1 = min(dst->y1, src[i].y1);
-		dst->y2 = max(dst->y2, src[i].y2);
-	}
-
-	if (dst->x2 > max_width || dst->y2 > max_height ||
-	    dst->x1 >= dst->x2 || dst->y1 >= dst->y2) {
-		DRM_DEBUG_KMS("Illegal clip: x1=%u, x2=%u, y1=%u, y2=%u\n",
-			      dst->x1, dst->x2, dst->y1, dst->y2);
-		dst->x1 = 0;
-		dst->y1 = 0;
-		dst->x2 = max_width;
-		dst->y2 = max_height;
-	}
-
-	return (dst->x2 - dst->x1) == max_width &&
-	       (dst->y2 - dst->y1) == max_height;
-}
-EXPORT_SYMBOL(tinydrm_merge_clips);
-
-int tinydrm_fb_dirty(struct drm_framebuffer *fb,
-		     struct drm_file *file_priv,
-		     unsigned int flags, unsigned int color,
-		     struct drm_clip_rect *clips,
-		     unsigned int num_clips)
-{
-	struct tinydrm_device *tdev = fb->dev->dev_private;
-	struct drm_plane *plane = &tdev->pipe.plane;
-	int ret = 0;
-
-	drm_modeset_lock(&plane->mutex, NULL);
-
-	/* fbdev can flush even when we're not interested */
-	if (plane->state->fb == fb) {
-		mutex_lock(&tdev->dirty_lock);
-		ret = tdev->fb_dirty(fb, file_priv, flags,
-				     color, clips, num_clips);
-		mutex_unlock(&tdev->dirty_lock);
-	}
-
-	drm_modeset_unlock(&plane->mutex);
-
-	if (ret)
-		dev_err_once(fb->dev->dev,
-			     "Failed to update display %d\n", ret);
-
-	return ret;
-}
-EXPORT_SYMBOL(tinydrm_fb_dirty);
-
 /**
  * tinydrm_memcpy - Copy clip buffer
  * @dst: Destination buffer
@@ -122,7 +34,7 @@ EXPORT_SYMBOL(tinydrm_fb_dirty);
  * @clip: Clip rectangle area to copy
  */
 void tinydrm_memcpy(void *dst, void *vaddr, struct drm_framebuffer *fb,
-		    struct drm_clip_rect *clip)
+		    struct drm_rect *clip)
 {
 	unsigned int cpp = drm_format_plane_cpp(fb->format->format, 0);
 	unsigned int pitch = fb->pitches[0];
@@ -146,7 +58,7 @@ EXPORT_SYMBOL(tinydrm_memcpy);
  * @clip: Clip rectangle area to copy
  */
 void tinydrm_swab16(u16 *dst, void *vaddr, struct drm_framebuffer *fb,
-		    struct drm_clip_rect *clip)
+		    struct drm_rect *clip)
 {
 	size_t len = (clip->x2 - clip->x1) * sizeof(u16);
 	unsigned int x, y;
@@ -186,7 +98,7 @@ EXPORT_SYMBOL(tinydrm_swab16);
  */
 void tinydrm_xrgb8888_to_rgb565(u16 *dst, void *vaddr,
 				struct drm_framebuffer *fb,
-				struct drm_clip_rect *clip, bool swap)
+				struct drm_rect *clip, bool swap)
 {
 	size_t len = (clip->x2 - clip->x1) * sizeof(u32);
 	unsigned int x, y;
@@ -235,7 +147,7 @@ EXPORT_SYMBOL(tinydrm_xrgb8888_to_rgb565);
  * ITU BT.601 is used for the RGB -> luma (brightness) conversion.
  */
 void tinydrm_xrgb8888_to_gray8(u8 *dst, void *vaddr, struct drm_framebuffer *fb,
-			       struct drm_clip_rect *clip)
+			       struct drm_rect *clip)
 {
 	unsigned int len = (clip->x2 - clip->x1) * sizeof(u32);
 	unsigned int x, y;

drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c

@@ -13,7 +13,6 @@
 #include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_modes.h>
 #include <drm/drm_print.h>
-#include <drm/drm_vblank.h>
 #include <drm/tinydrm/tinydrm.h>
 
 struct tinydrm_connector {
@@ -111,36 +110,6 @@ tinydrm_connector_create(struct drm_device *drm,
 	return connector;
 }
 
-/**
- * tinydrm_display_pipe_update - Display pipe update helper
- * @pipe: Simple display pipe
- * @old_state: Old plane state
- *
- * This function does a full framebuffer flush if the plane framebuffer
- * has changed. It also handles vblank events. Drivers can use this as their
- * &drm_simple_display_pipe_funcs->update callback.
- */
-void tinydrm_display_pipe_update(struct drm_simple_display_pipe *pipe,
-				 struct drm_plane_state *old_state)
-{
-	struct tinydrm_device *tdev = pipe_to_tinydrm(pipe);
-	struct drm_framebuffer *fb = pipe->plane.state->fb;
-	struct drm_crtc *crtc = &tdev->pipe.crtc;
-
-	if (fb && (fb != old_state->fb)) {
-		if (tdev->fb_dirty)
-			tdev->fb_dirty(fb, NULL, 0, 0, NULL, 0);
-	}
-
-	if (crtc->state->event) {
-		spin_lock_irq(&crtc->dev->event_lock);
-		drm_crtc_send_vblank_event(crtc, crtc->state->event);
-		spin_unlock_irq(&crtc->dev->event_lock);
-		crtc->state->event = NULL;
-	}
-}
-EXPORT_SYMBOL(tinydrm_display_pipe_update);
-
 static int tinydrm_rotate_mode(struct drm_display_mode *mode,
 			       unsigned int rotation)
 {

drivers/gpu/drm/tinydrm/hx8357d.c

@@ -176,7 +176,7 @@ static void yx240qv29_enable(struct drm_simple_display_pipe *pipe,
 static const struct drm_simple_display_pipe_funcs hx8357d_pipe_funcs = {
 	.enable = yx240qv29_enable,
 	.disable = mipi_dbi_pipe_disable,
-	.update = tinydrm_display_pipe_update,
+	.update = mipi_dbi_pipe_update,
 	.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
 };
 

drivers/gpu/drm/tinydrm/ili9225.c

@@ -20,11 +20,14 @@
 #include <linux/spi/spi.h>
 #include <video/mipi_display.h>
 
+#include <drm/drm_damage_helper.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_fourcc.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_rect.h>
+#include <drm/drm_vblank.h>
 #include <drm/tinydrm/mipi-dbi.h>
 #include <drm/tinydrm/tinydrm-helpers.h>
 
@@ -75,16 +78,14 @@ static inline int ili9225_command(struct mipi_dbi *mipi, u8 cmd, u16 data)
 	return mipi_dbi_command_buf(mipi, cmd, par, 2);
 }
 
-static int ili9225_fb_dirty(struct drm_framebuffer *fb,
-			    struct drm_file *file_priv, unsigned int flags,
-			    unsigned int color, struct drm_clip_rect *clips,
-			    unsigned int num_clips)
+static void ili9225_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect)
 {
 	struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
 	struct tinydrm_device *tdev = fb->dev->dev_private;
 	struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
+	unsigned int height = rect->y2 - rect->y1;
+	unsigned int width = rect->x2 - rect->x1;
 	bool swap = mipi->swap_bytes;
-	struct drm_clip_rect clip;
 	u16 x_start, y_start;
 	u16 x1, x2, y1, y2;
 	int ret = 0;
@@ -92,54 +93,52 @@ static int ili9225_fb_dirty(struct drm_framebuffer *fb,
 	void *tr;
 
 	if (!mipi->enabled)
-		return 0;
+		return;
 
-	full = tinydrm_merge_clips(&clip, clips, num_clips, flags,
-				   fb->width, fb->height);
+	full = width == fb->width && height == fb->height;
 
-	DRM_DEBUG("Flushing [FB:%d] x1=%u, x2=%u, y1=%u, y2=%u\n", fb->base.id,
-		  clip.x1, clip.x2, clip.y1, clip.y2);
+	DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect));
 
 	if (!mipi->dc || !full || swap ||
 	    fb->format->format == DRM_FORMAT_XRGB8888) {
 		tr = mipi->tx_buf;
-		ret = mipi_dbi_buf_copy(mipi->tx_buf, fb, &clip, swap);
+		ret = mipi_dbi_buf_copy(mipi->tx_buf, fb, rect, swap);
 		if (ret)
-			return ret;
+			goto err_msg;
 	} else {
 		tr = cma_obj->vaddr;
 	}
 
 	switch (mipi->rotation) {
 	default:
-		x1 = clip.x1;
-		x2 = clip.x2 - 1;
-		y1 = clip.y1;
-		y2 = clip.y2 - 1;
+		x1 = rect->x1;
+		x2 = rect->x2 - 1;
+		y1 = rect->y1;
+		y2 = rect->y2 - 1;
 		x_start = x1;
 		y_start = y1;
 		break;
 	case 90:
-		x1 = clip.y1;
-		x2 = clip.y2 - 1;
-		y1 = fb->width - clip.x2;
-		y2 = fb->width - clip.x1 - 1;
+		x1 = rect->y1;
+		x2 = rect->y2 - 1;
+		y1 = fb->width - rect->x2;
+		y2 = fb->width - rect->x1 - 1;
 		x_start = x1;
 		y_start = y2;
 		break;
 	case 180:
-		x1 = fb->width - clip.x2;
-		x2 = fb->width - clip.x1 - 1;
-		y1 = fb->height - clip.y2;
-		y2 = fb->height - clip.y1 - 1;
+		x1 = fb->width - rect->x2;
+		x2 = fb->width - rect->x1 - 1;
+		y1 = fb->height - rect->y2;
+		y2 = fb->height - rect->y1 - 1;
 		x_start = x2;
 		y_start = y2;
 		break;
 	case 270:
-		x1 = fb->height - clip.y2;
-		x2 = fb->height - clip.y1 - 1;
-		y1 = clip.x1;
-		y2 = clip.x2 - 1;
+		x1 = fb->height - rect->y2;
+		x2 = fb->height - rect->y1 - 1;
+		y1 = rect->x1;
+		y2 = rect->x2 - 1;
 		x_start = x2;
 		y_start = y1;
 		break;
@@ -154,16 +153,29 @@ static int ili9225_fb_dirty(struct drm_framebuffer *fb,
 	ili9225_command(mipi, ILI9225_RAM_ADDRESS_SET_2, y_start);
 
 	ret = mipi_dbi_command_buf(mipi, ILI9225_WRITE_DATA_TO_GRAM, tr,
-				(clip.x2 - clip.x1) * (clip.y2 - clip.y1) * 2);
-
-	return ret;
+				   width * height * 2);
+err_msg:
+	if (ret)
+		dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
 }
 
-static const struct drm_framebuffer_funcs ili9225_fb_funcs = {
-	.destroy	= drm_gem_fb_destroy,
-	.create_handle	= drm_gem_fb_create_handle,
-	.dirty		= tinydrm_fb_dirty,
-};
+static void ili9225_pipe_update(struct drm_simple_display_pipe *pipe,
+				struct drm_plane_state *old_state)
+{
+	struct drm_plane_state *state = pipe->plane.state;
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_rect rect;
+
+	if (drm_atomic_helper_damage_merged(old_state, state, &rect))
+		ili9225_fb_dirty(state->fb, &rect);
+
+	if (crtc->state->event) {
+		spin_lock_irq(&crtc->dev->event_lock);
+		drm_crtc_send_vblank_event(crtc, crtc->state->event);
+		spin_unlock_irq(&crtc->dev->event_lock);
+		crtc->state->event = NULL;
+	}
+}
 
 static void ili9225_pipe_enable(struct drm_simple_display_pipe *pipe,
 				struct drm_crtc_state *crtc_state,
@@ -171,7 +183,14 @@ static void ili9225_pipe_enable(struct drm_simple_display_pipe *pipe,
 {
 	struct tinydrm_device *tdev = pipe_to_tinydrm(pipe);
 	struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
+	struct drm_framebuffer *fb = plane_state->fb;
 	struct device *dev = tdev->drm->dev;
+	struct drm_rect rect = {
+		.x1 = 0,
+		.x2 = fb->width,
+		.y1 = 0,
+		.y2 = fb->height,
+	};
 	int ret;
 	u8 am_id;
 
@@ -259,7 +278,8 @@ static void ili9225_pipe_enable(struct drm_simple_display_pipe *pipe,
 
 	ili9225_command(mipi, ILI9225_DISPLAY_CONTROL_1, 0x1017);
 
-	mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
+	mipi->enabled = true;
+	ili9225_fb_dirty(fb, &rect);
 }
 
 static void ili9225_pipe_disable(struct drm_simple_display_pipe *pipe)
@@ -304,59 +324,10 @@ static int ili9225_dbi_command(struct mipi_dbi *mipi, u8 cmd, u8 *par,
 	return tinydrm_spi_transfer(spi, speed_hz, NULL, bpw, par, num);
 }
 
-static const u32 ili9225_formats[] = {
-	DRM_FORMAT_RGB565,
-	DRM_FORMAT_XRGB8888,
-};
-
-static int ili9225_init(struct device *dev, struct mipi_dbi *mipi,
-			const struct drm_simple_display_pipe_funcs *pipe_funcs,
-			struct drm_driver *driver,
-			const struct drm_display_mode *mode,
-			unsigned int rotation)
-{
-	size_t bufsize = mode->vdisplay * mode->hdisplay * sizeof(u16);
-	struct tinydrm_device *tdev = &mipi->tinydrm;
-	int ret;
-
-	if (!mipi->command)
-		return -EINVAL;
-
-	mutex_init(&mipi->cmdlock);
-
-	mipi->tx_buf = devm_kmalloc(dev, bufsize, GFP_KERNEL);
-	if (!mipi->tx_buf)
-		return -ENOMEM;
-
-	ret = devm_tinydrm_init(dev, tdev, &ili9225_fb_funcs, driver);
-	if (ret)
-		return ret;
-
-	tdev->fb_dirty = ili9225_fb_dirty;
-
-	ret = tinydrm_display_pipe_init(tdev, pipe_funcs,
-					DRM_MODE_CONNECTOR_VIRTUAL,
-					ili9225_formats,
-					ARRAY_SIZE(ili9225_formats), mode,
-					rotation);
-	if (ret)
-		return ret;
-
-	tdev->drm->mode_config.preferred_depth = 16;
-	mipi->rotation = rotation;
-
-	drm_mode_config_reset(tdev->drm);
-
-	DRM_DEBUG_KMS("preferred_depth=%u, rotation = %u\n",
-		      tdev->drm->mode_config.preferred_depth, rotation);
-
-	return 0;
-}
-
 static const struct drm_simple_display_pipe_funcs ili9225_pipe_funcs = {
 	.enable		= ili9225_pipe_enable,
 	.disable	= ili9225_pipe_disable,
-	.update		= tinydrm_display_pipe_update,
+	.update		= ili9225_pipe_update,
 	.prepare_fb	= drm_gem_fb_simple_display_pipe_prepare_fb,
 };
 
@@ -423,8 +394,8 @@ static int ili9225_probe(struct spi_device *spi)
 	/* override the command function set in  mipi_dbi_spi_init() */
 	mipi->command = ili9225_dbi_command;
 
-	ret = ili9225_init(&spi->dev, mipi, &ili9225_pipe_funcs,
-			   &ili9225_driver, &ili9225_mode, rotation);
+	ret = mipi_dbi_init(&spi->dev, mipi, &ili9225_pipe_funcs,
+			    &ili9225_driver, &ili9225_mode, rotation);
 	if (ret)
 		return ret;
 

drivers/gpu/drm/tinydrm/ili9341.c

@@ -132,7 +132,7 @@ static void yx240qv29_enable(struct drm_simple_display_pipe *pipe,
 static const struct drm_simple_display_pipe_funcs ili9341_pipe_funcs = {
 	.enable = yx240qv29_enable,
 	.disable = mipi_dbi_pipe_disable,
-	.update = tinydrm_display_pipe_update,
+	.update = mipi_dbi_pipe_update,
 	.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
 };
 

drivers/gpu/drm/tinydrm/mi0283qt.c

@@ -140,7 +140,7 @@ static void mi0283qt_enable(struct drm_simple_display_pipe *pipe,
 static const struct drm_simple_display_pipe_funcs mi0283qt_pipe_funcs = {
 	.enable = mi0283qt_enable,
 	.disable = mipi_dbi_pipe_disable,
-	.update = tinydrm_display_pipe_update,
+	.update = mipi_dbi_pipe_update,
 	.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
 };
 

drivers/gpu/drm/tinydrm/mipi-dbi.c

@@ -17,14 +17,16 @@
 #include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
 
+#include <drm/drm_damage_helper.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_fourcc.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_vblank.h>
+#include <drm/drm_rect.h>
 #include <drm/tinydrm/mipi-dbi.h>
 #include <drm/tinydrm/tinydrm-helpers.h>
-#include <uapi/drm/drm.h>
 #include <video/mipi_display.h>
 
 #define MIPI_DBI_MAX_SPI_READ_SPEED 2000000 /* 2MHz */
@@ -172,7 +174,7 @@ EXPORT_SYMBOL(mipi_dbi_command_buf);
  * Zero on success, negative error code on failure.
  */
 int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb,
-		      struct drm_clip_rect *clip, bool swap)
+		      struct drm_rect *clip, bool swap)
 {
 	struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
 	struct dma_buf_attachment *import_attach = cma_obj->base.import_attach;
@@ -211,58 +213,75 @@ int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb,
 }
 EXPORT_SYMBOL(mipi_dbi_buf_copy);
 
-static int mipi_dbi_fb_dirty(struct drm_framebuffer *fb,
-			     struct drm_file *file_priv,
-			     unsigned int flags, unsigned int color,
-			     struct drm_clip_rect *clips,
-			     unsigned int num_clips)
+static void mipi_dbi_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect)
 {
 	struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
 	struct tinydrm_device *tdev = fb->dev->dev_private;
 	struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
+	unsigned int height = rect->y2 - rect->y1;
+	unsigned int width = rect->x2 - rect->x1;
 	bool swap = mipi->swap_bytes;
-	struct drm_clip_rect clip;
 	int ret = 0;
 	bool full;
 	void *tr;
 
 	if (!mipi->enabled)
-		return 0;
+		return;
 
-	full = tinydrm_merge_clips(&clip, clips, num_clips, flags,
-				   fb->width, fb->height);
+	full = width == fb->width && height == fb->height;
 
-	DRM_DEBUG("Flushing [FB:%d] x1=%u, x2=%u, y1=%u, y2=%u\n", fb->base.id,
-		  clip.x1, clip.x2, clip.y1, clip.y2);
+	DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect));
 
 	if (!mipi->dc || !full || swap ||
 	    fb->format->format == DRM_FORMAT_XRGB8888) {
 		tr = mipi->tx_buf;
-		ret = mipi_dbi_buf_copy(mipi->tx_buf, fb, &clip, swap);
+		ret = mipi_dbi_buf_copy(mipi->tx_buf, fb, rect, swap);
 		if (ret)
-			return ret;
+			goto err_msg;
 	} else {
 		tr = cma_obj->vaddr;
 	}
 
 	mipi_dbi_command(mipi, MIPI_DCS_SET_COLUMN_ADDRESS,
-			 (clip.x1 >> 8) & 0xFF, clip.x1 & 0xFF,
-			 ((clip.x2 - 1) >> 8) & 0xFF, (clip.x2 - 1) & 0xFF);
+			 (rect->x1 >> 8) & 0xff, rect->x1 & 0xff,
+			 ((rect->x2 - 1) >> 8) & 0xff, (rect->x2 - 1) & 0xff);
 	mipi_dbi_command(mipi, MIPI_DCS_SET_PAGE_ADDRESS,
-			 (clip.y1 >> 8) & 0xFF, clip.y1 & 0xFF,
-			 ((clip.y2 - 1) >> 8) & 0xFF, (clip.y2 - 1) & 0xFF);
+			 (rect->y1 >> 8) & 0xff, rect->y1 & 0xff,
+			 ((rect->y2 - 1) >> 8) & 0xff, (rect->y2 - 1) & 0xff);
 
 	ret = mipi_dbi_command_buf(mipi, MIPI_DCS_WRITE_MEMORY_START, tr,
-				(clip.x2 - clip.x1) * (clip.y2 - clip.y1) * 2);
-
-	return ret;
+				   width * height * 2);
+err_msg:
+	if (ret)
+		dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
 }
 
-static const struct drm_framebuffer_funcs mipi_dbi_fb_funcs = {
-	.destroy	= drm_gem_fb_destroy,
-	.create_handle	= drm_gem_fb_create_handle,
-	.dirty		= tinydrm_fb_dirty,
-};
+/**
+ * mipi_dbi_pipe_update - Display pipe update helper
+ * @pipe: Simple display pipe
+ * @old_state: Old plane state
+ *
+ * This function handles framebuffer flushing and vblank events. Drivers can use
+ * this as their &drm_simple_display_pipe_funcs->update callback.
+ */
+void mipi_dbi_pipe_update(struct drm_simple_display_pipe *pipe,
+			  struct drm_plane_state *old_state)
+{
+	struct drm_plane_state *state = pipe->plane.state;
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_rect rect;
+
+	if (drm_atomic_helper_damage_merged(old_state, state, &rect))
+		mipi_dbi_fb_dirty(state->fb, &rect);
+
+	if (crtc->state->event) {
+		spin_lock_irq(&crtc->dev->event_lock);
+		drm_crtc_send_vblank_event(crtc, crtc->state->event);
+		spin_unlock_irq(&crtc->dev->event_lock);
+		crtc->state->event = NULL;
+	}
+}
+EXPORT_SYMBOL(mipi_dbi_pipe_update);
 
 /**
  * mipi_dbi_enable_flush - MIPI DBI enable helper
@@ -273,18 +292,25 @@ static const struct drm_framebuffer_funcs mipi_dbi_fb_funcs = {
  * This function sets &mipi_dbi->enabled, flushes the whole framebuffer and
  * enables the backlight. Drivers can use this in their
  * &drm_simple_display_pipe_funcs->enable callback.
+ *
+ * Note: Drivers which don't use mipi_dbi_pipe_update() because they have custom
+ * framebuffer flushing, can't use this function since they both use the same
+ * flushing code.
  */
 void mipi_dbi_enable_flush(struct mipi_dbi *mipi,
 			   struct drm_crtc_state *crtc_state,
 			   struct drm_plane_state *plane_state)
 {
-	struct tinydrm_device *tdev = &mipi->tinydrm;
 	struct drm_framebuffer *fb = plane_state->fb;
+	struct drm_rect rect = {
+		.x1 = 0,
+		.x2 = fb->width,
+		.y1 = 0,
+		.y2 = fb->height,
+	};
 
 	mipi->enabled = true;
-	if (fb)
-		tdev->fb_dirty(fb, NULL, 0, 0, NULL, 0);
-
+	mipi_dbi_fb_dirty(fb, &rect);
 	backlight_enable(mipi->backlight);
 }
 EXPORT_SYMBOL(mipi_dbi_enable_flush);
@@ -376,12 +402,10 @@ int mipi_dbi_init(struct device *dev, struct mipi_dbi *mipi,
 	if (!mipi->tx_buf)
 		return -ENOMEM;
 
-	ret = devm_tinydrm_init(dev, tdev, &mipi_dbi_fb_funcs, driver);
+	ret = devm_tinydrm_init(dev, tdev, driver);
 	if (ret)
 		return ret;
 
-	tdev->fb_dirty = mipi_dbi_fb_dirty;
-
 	/* TODO: Maybe add DRM_MODE_CONNECTOR_SPI */
 	ret = tinydrm_display_pipe_init(tdev, pipe_funcs,
 					DRM_MODE_CONNECTOR_VIRTUAL,
@@ -391,6 +415,8 @@ int mipi_dbi_init(struct device *dev, struct mipi_dbi *mipi,
 	if (ret)
 		return ret;
 
+	drm_plane_enable_fb_damage_clips(&tdev->pipe.plane);
+
 	tdev->drm->mode_config.preferred_depth = 16;
 	mipi->rotation = rotation;
 

drivers/gpu/drm/tinydrm/repaper.c

@@ -26,10 +26,13 @@
 #include <linux/spi/spi.h>
 #include <linux/thermal.h>
 
+#include <drm/drm_damage_helper.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_rect.h>
+#include <drm/drm_vblank.h>
 #include <drm/tinydrm/tinydrm.h>
 #include <drm/tinydrm/tinydrm-helpers.h>
 
@@ -522,17 +525,13 @@ static void repaper_gray8_to_mono_reversed(u8 *buf, u32 width, u32 height)
 		}
 }
 
-static int repaper_fb_dirty(struct drm_framebuffer *fb,
-			    struct drm_file *file_priv,
-			    unsigned int flags, unsigned int color,
-			    struct drm_clip_rect *clips,
-			    unsigned int num_clips)
+static int repaper_fb_dirty(struct drm_framebuffer *fb)
 {
 	struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
 	struct dma_buf_attachment *import_attach = cma_obj->base.import_attach;
 	struct tinydrm_device *tdev = fb->dev->dev_private;
 	struct repaper_epd *epd = epd_from_tinydrm(tdev);
-	struct drm_clip_rect clip;
+	struct drm_rect clip;
 	u8 *buf = NULL;
 	int ret = 0;
 
@@ -625,12 +624,6 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb,
 	return ret;
 }
 
-static const struct drm_framebuffer_funcs repaper_fb_funcs = {
-	.destroy	= drm_gem_fb_destroy,
-	.create_handle	= drm_gem_fb_create_handle,
-	.dirty		= tinydrm_fb_dirty,
-};
-
 static void power_off(struct repaper_epd *epd)
 {
 	/* Turn off power and all signals */
@@ -794,9 +787,7 @@ static void repaper_pipe_disable(struct drm_simple_display_pipe *pipe)
 
 	DRM_DEBUG_DRIVER("\n");
 
-	mutex_lock(&tdev->dirty_lock);
 	epd->enabled = false;
-	mutex_unlock(&tdev->dirty_lock);
 
 	/* Nothing frame */
 	for (line = 0; line < epd->height; line++)
@@ -839,10 +830,28 @@ static void repaper_pipe_disable(struct drm_simple_display_pipe *pipe)
 	power_off(epd);
 }
 
+static void repaper_pipe_update(struct drm_simple_display_pipe *pipe,
+				struct drm_plane_state *old_state)
+{
+	struct drm_plane_state *state = pipe->plane.state;
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_rect rect;
+
+	if (drm_atomic_helper_damage_merged(old_state, state, &rect))
+		repaper_fb_dirty(state->fb);
+
+	if (crtc->state->event) {
+		spin_lock_irq(&crtc->dev->event_lock);
+		drm_crtc_send_vblank_event(crtc, crtc->state->event);
+		spin_unlock_irq(&crtc->dev->event_lock);
+		crtc->state->event = NULL;
+	}
+}
+
 static const struct drm_simple_display_pipe_funcs repaper_pipe_funcs = {
 	.enable = repaper_pipe_enable,
 	.disable = repaper_pipe_disable,
-	.update = tinydrm_display_pipe_update,
+	.update = repaper_pipe_update,
 	.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
 };
 
@@ -1056,12 +1065,10 @@ static int repaper_probe(struct spi_device *spi)
 
 	tdev = &epd->tinydrm;
 
-	ret = devm_tinydrm_init(dev, tdev, &repaper_fb_funcs, &repaper_driver);
+	ret = devm_tinydrm_init(dev, tdev, &repaper_driver);
 	if (ret)
 		return ret;
 
-	tdev->fb_dirty = repaper_fb_dirty;
-
 	ret = tinydrm_display_pipe_init(tdev, &repaper_pipe_funcs,
 					DRM_MODE_CONNECTOR_VIRTUAL,
 					repaper_formats,

drivers/gpu/drm/tinydrm/st7586.c

@@ -17,10 +17,13 @@
 #include <linux/spi/spi.h>
 #include <video/mipi_display.h>
 
+#include <drm/drm_damage_helper.h>
 #include <drm/drm_drv.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_rect.h>
+#include <drm/drm_vblank.h>
 #include <drm/tinydrm/mipi-dbi.h>
 #include <drm/tinydrm/tinydrm-helpers.h>
 
@@ -62,7 +65,7 @@ static const u8 st7586_lookup[] = { 0x7, 0x4, 0x2, 0x0 };
 
 static void st7586_xrgb8888_to_gray332(u8 *dst, void *vaddr,
 				       struct drm_framebuffer *fb,
-				       struct drm_clip_rect *clip)
+				       struct drm_rect *clip)
 {
 	size_t len = (clip->x2 - clip->x1) * (clip->y2 - clip->y1);
 	unsigned int x, y;
@@ -88,7 +91,7 @@ static void st7586_xrgb8888_to_gray332(u8 *dst, void *vaddr,
 }
 
 static int st7586_buf_copy(void *dst, struct drm_framebuffer *fb,
-			   struct drm_clip_rect *clip)
+			   struct drm_rect *clip)
 {
 	struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
 	struct dma_buf_attachment *import_attach = cma_obj->base.import_attach;
@@ -111,57 +114,62 @@ static int st7586_buf_copy(void *dst, struct drm_framebuffer *fb,
 	return ret;
 }
 
-static int st7586_fb_dirty(struct drm_framebuffer *fb,
-			   struct drm_file *file_priv, unsigned int flags,
-			   unsigned int color, struct drm_clip_rect *clips,
-			   unsigned int num_clips)
+static void st7586_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect)
 {
 	struct tinydrm_device *tdev = fb->dev->dev_private;
 	struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
-	struct drm_clip_rect clip;
 	int start, end;
 	int ret = 0;
 
 	if (!mipi->enabled)
-		return 0;
-
-	tinydrm_merge_clips(&clip, clips, num_clips, flags, fb->width,
-			    fb->height);
+		return;
 
 	/* 3 pixels per byte, so grow clip to nearest multiple of 3 */
-	clip.x1 = rounddown(clip.x1, 3);
-	clip.x2 = roundup(clip.x2, 3);
+	rect->x1 = rounddown(rect->x1, 3);
+	rect->x2 = roundup(rect->x2, 3);
 
-	DRM_DEBUG("Flushing [FB:%d] x1=%u, x2=%u, y1=%u, y2=%u\n", fb->base.id,
-		  clip.x1, clip.x2, clip.y1, clip.y2);
+	DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect));
 
-	ret = st7586_buf_copy(mipi->tx_buf, fb, &clip);
+	ret = st7586_buf_copy(mipi->tx_buf, fb, rect);
 	if (ret)
-		return ret;
+		goto err_msg;
 
 	/* Pixels are packed 3 per byte */
-	start = clip.x1 / 3;
-	end = clip.x2 / 3;
+	start = rect->x1 / 3;
+	end = rect->x2 / 3;
 
 	mipi_dbi_command(mipi, MIPI_DCS_SET_COLUMN_ADDRESS,
 			 (start >> 8) & 0xFF, start & 0xFF,
 			 (end >> 8) & 0xFF, (end - 1) & 0xFF);
 	mipi_dbi_command(mipi, MIPI_DCS_SET_PAGE_ADDRESS,
-			 (clip.y1 >> 8) & 0xFF, clip.y1 & 0xFF,
-			 (clip.y2 >> 8) & 0xFF, (clip.y2 - 1) & 0xFF);
+			 (rect->y1 >> 8) & 0xFF, rect->y1 & 0xFF,
+			 (rect->y2 >> 8) & 0xFF, (rect->y2 - 1) & 0xFF);
 
 	ret = mipi_dbi_command_buf(mipi, MIPI_DCS_WRITE_MEMORY_START,
 				   (u8 *)mipi->tx_buf,
-				   (end - start) * (clip.y2 - clip.y1));
-
-	return ret;
+				   (end - start) * (rect->y2 - rect->y1));
+err_msg:
+	if (ret)
+		dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
 }
 
-static const struct drm_framebuffer_funcs st7586_fb_funcs = {
-	.destroy	= drm_gem_fb_destroy,
-	.create_handle	= drm_gem_fb_create_handle,
-	.dirty		= tinydrm_fb_dirty,
-};
+static void st7586_pipe_update(struct drm_simple_display_pipe *pipe,
+			       struct drm_plane_state *old_state)
+{
+	struct drm_plane_state *state = pipe->plane.state;
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_rect rect;
+
+	if (drm_atomic_helper_damage_merged(old_state, state, &rect))
+		st7586_fb_dirty(state->fb, &rect);
+
+	if (crtc->state->event) {
+		spin_lock_irq(&crtc->dev->event_lock);
+		drm_crtc_send_vblank_event(crtc, crtc->state->event);
+		spin_unlock_irq(&crtc->dev->event_lock);
+		crtc->state->event = NULL;
+	}
+}
 
 static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe,
 			       struct drm_crtc_state *crtc_state,
@@ -169,6 +177,13 @@ static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe,
 {
 	struct tinydrm_device *tdev = pipe_to_tinydrm(pipe);
 	struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
+	struct drm_framebuffer *fb = plane_state->fb;
+	struct drm_rect rect = {
+		.x1 = 0,
+		.x2 = fb->width,
+		.y1 = 0,
+		.y2 = fb->height,
+	};
 	int ret;
 	u8 addr_mode;
 
@@ -225,9 +240,10 @@ static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe,
 
 	msleep(100);
 
-	mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_ON);
+	mipi->enabled = true;
+	st7586_fb_dirty(fb, &rect);
 
-	mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
+	mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_ON);
 }
 
 static void st7586_pipe_disable(struct drm_simple_display_pipe *pipe)
@@ -263,12 +279,10 @@ static int st7586_init(struct device *dev, struct mipi_dbi *mipi,
 	if (!mipi->tx_buf)
 		return -ENOMEM;
 
-	ret = devm_tinydrm_init(dev, tdev, &st7586_fb_funcs, driver);
+	ret = devm_tinydrm_init(dev, tdev, driver);
 	if (ret)
 		return ret;
 
-	tdev->fb_dirty = st7586_fb_dirty;
-
 	ret = tinydrm_display_pipe_init(tdev, pipe_funcs,
 					DRM_MODE_CONNECTOR_VIRTUAL,
 					st7586_formats,
@@ -277,6 +291,8 @@ static int st7586_init(struct device *dev, struct mipi_dbi *mipi,
 	if (ret)
 		return ret;
 
+	drm_plane_enable_fb_damage_clips(&tdev->pipe.plane);
+
 	tdev->drm->mode_config.preferred_depth = 32;
 	mipi->rotation = rotation;
 
@@ -291,7 +307,7 @@ static int st7586_init(struct device *dev, struct mipi_dbi *mipi,
 static const struct drm_simple_display_pipe_funcs st7586_pipe_funcs = {
 	.enable		= st7586_pipe_enable,
 	.disable	= st7586_pipe_disable,
-	.update		= tinydrm_display_pipe_update,
+	.update		= st7586_pipe_update,
 	.prepare_fb	= drm_gem_fb_simple_display_pipe_prepare_fb,
 };
 

drivers/gpu/drm/tinydrm/st7735r.c

@@ -106,7 +106,7 @@ static void jd_t18003_t01_pipe_enable(struct drm_simple_display_pipe *pipe,
 static const struct drm_simple_display_pipe_funcs jd_t18003_t01_pipe_funcs = {
 	.enable		= jd_t18003_t01_pipe_enable,
 	.disable	= mipi_dbi_pipe_disable,
-	.update		= tinydrm_display_pipe_update,
+	.update		= mipi_dbi_pipe_update,
 	.prepare_fb	= drm_gem_fb_simple_display_pipe_prepare_fb,
 };
 

include/drm/drm_damage_helper.h

@@ -78,6 +78,9 @@ drm_atomic_helper_damage_iter_init(struct drm_atomic_helper_damage_iter *iter,
 bool
 drm_atomic_helper_damage_iter_next(struct drm_atomic_helper_damage_iter *iter,
 				   struct drm_rect *rect);
+bool drm_atomic_helper_damage_merged(const struct drm_plane_state *old_state,
+				     struct drm_plane_state *state,
+				     struct drm_rect *rect);
 
 /**
  * drm_helper_get_plane_damage_clips - Returns damage clips in &drm_rect.

include/drm/drm_fb_cma_helper.h

@@ -2,31 +2,9 @@
 #ifndef __DRM_FB_CMA_HELPER_H__
 #define __DRM_FB_CMA_HELPER_H__
 
-struct drm_fbdev_cma;
-struct drm_gem_cma_object;
-
-struct drm_fb_helper_surface_size;
-struct drm_framebuffer_funcs;
-struct drm_fb_helper_funcs;
 struct drm_framebuffer;
-struct drm_fb_helper;
-struct drm_device;
-struct drm_file;
-struct drm_mode_fb_cmd2;
-struct drm_plane;
 struct drm_plane_state;
 
-int drm_fb_cma_fbdev_init(struct drm_device *dev, unsigned int preferred_bpp,
-			  unsigned int max_conn_count);
-void drm_fb_cma_fbdev_fini(struct drm_device *dev);
-
-struct drm_fbdev_cma *drm_fbdev_cma_init(struct drm_device *dev,
-	unsigned int preferred_bpp, unsigned int max_conn_count);
-void drm_fbdev_cma_fini(struct drm_fbdev_cma *fbdev_cma);
-
-void drm_fbdev_cma_restore_mode(struct drm_fbdev_cma *fbdev_cma);
-void drm_fbdev_cma_hotplug_event(struct drm_fbdev_cma *fbdev_cma);
-
 struct drm_gem_cma_object *drm_fb_cma_get_gem_obj(struct drm_framebuffer *fb,
 	unsigned int plane);
 

include/drm/drm_fourcc.h

@@ -143,6 +143,123 @@ struct drm_format_name_buf {
 	char str[32];
 };
 
+/**
+ * drm_format_info_is_yuv_packed - check that the format info matches a YUV
+ * format with data laid in a single plane
+ * @info: format info
+ *
+ * Returns:
+ * A boolean indicating whether the format info matches a packed YUV format.
+ */
+static inline bool
+drm_format_info_is_yuv_packed(const struct drm_format_info *info)
+{
+	return info->is_yuv && info->num_planes == 1;
+}
+
+/**
+ * drm_format_info_is_yuv_semiplanar - check that the format info matches a YUV
+ * format with data laid in two planes (luminance and chrominance)
+ * @info: format info
+ *
+ * Returns:
+ * A boolean indicating whether the format info matches a semiplanar YUV format.
+ */
+static inline bool
+drm_format_info_is_yuv_semiplanar(const struct drm_format_info *info)
+{
+	return info->is_yuv && info->num_planes == 2;
+}
+
+/**
+ * drm_format_info_is_yuv_planar - check that the format info matches a YUV
+ * format with data laid in three planes (one for each YUV component)
+ * @info: format info
+ *
+ * Returns:
+ * A boolean indicating whether the format info matches a planar YUV format.
+ */
+static inline bool
+drm_format_info_is_yuv_planar(const struct drm_format_info *info)
+{
+	return info->is_yuv && info->num_planes == 3;
+}
+
+/**
+ * drm_format_info_is_yuv_sampling_410 - check that the format info matches a
+ * YUV format with 4:1:0 sub-sampling
+ * @info: format info
+ *
+ * Returns:
+ * A boolean indicating whether the format info matches a YUV format with 4:1:0
+ * sub-sampling.
+ */
+static inline bool
+drm_format_info_is_yuv_sampling_410(const struct drm_format_info *info)
+{
+	return info->is_yuv && info->hsub == 4 && info->vsub == 4;
+}
+
+/**
+ * drm_format_info_is_yuv_sampling_411 - check that the format info matches a
+ * YUV format with 4:1:1 sub-sampling
+ * @info: format info
+ *
+ * Returns:
+ * A boolean indicating whether the format info matches a YUV format with 4:1:1
+ * sub-sampling.
+ */
+static inline bool
+drm_format_info_is_yuv_sampling_411(const struct drm_format_info *info)
+{
+	return info->is_yuv && info->hsub == 4 && info->vsub == 1;
+}
+
+/**
+ * drm_format_info_is_yuv_sampling_420 - check that the format info matches a
+ * YUV format with 4:2:0 sub-sampling
+ * @info: format info
+ *
+ * Returns:
+ * A boolean indicating whether the format info matches a YUV format with 4:2:0
+ * sub-sampling.
+ */
+static inline bool
+drm_format_info_is_yuv_sampling_420(const struct drm_format_info *info)
+{
+	return info->is_yuv && info->hsub == 2 && info->vsub == 2;
+}
+
+/**
+ * drm_format_info_is_yuv_sampling_422 - check that the format info matches a
+ * YUV format with 4:2:2 sub-sampling
+ * @info: format info
+ *
+ * Returns:
+ * A boolean indicating whether the format info matches a YUV format with 4:2:2
+ * sub-sampling.
+ */
+static inline bool
+drm_format_info_is_yuv_sampling_422(const struct drm_format_info *info)
+{
+	return info->is_yuv && info->hsub == 2 && info->vsub == 1;
+}
+
+/**
+ * drm_format_info_is_yuv_sampling_444 - check that the format info matches a
+ * YUV format with 4:4:4 sub-sampling
+ * @info: format info
+ *
+ * Returns:
+ * A boolean indicating whether the format info matches a YUV format with 4:4:4
+ * sub-sampling.
+ */
+static inline bool
+drm_format_info_is_yuv_sampling_444(const struct drm_format_info *info)
+{
+	return info->is_yuv && info->hsub == 1 && info->vsub == 1;
+}
+
 const struct drm_format_info *__drm_format_info(u32 format);
 const struct drm_format_info *drm_format_info(u32 format);
 const struct drm_format_info *

include/drm/drm_gem_framebuffer_helper.h

@@ -25,6 +25,9 @@ drm_gem_fb_create_with_funcs(struct drm_device *dev, struct drm_file *file,
 struct drm_framebuffer *
 drm_gem_fb_create(struct drm_device *dev, struct drm_file *file,
 		  const struct drm_mode_fb_cmd2 *mode_cmd);
+struct drm_framebuffer *
+drm_gem_fb_create_with_dirty(struct drm_device *dev, struct drm_file *file,
+			     const struct drm_mode_fb_cmd2 *mode_cmd);
 
 int drm_gem_fb_prepare_fb(struct drm_plane *plane,
 			  struct drm_plane_state *state);

include/drm/drm_util.h

@@ -71,7 +71,7 @@
  * FIXME: All users of drm_can_sleep should be removed (see todo.rst)
  *
  * Returns:
- * True if kgdb is active or we are in an atomic context or irqs are disabled
+ * False if kgdb is active, we are in atomic context or irqs are disabled.
  */
 static inline bool drm_can_sleep(void)
 {

include/drm/tinydrm/mipi-dbi.h

@@ -14,6 +14,7 @@
 
 #include <drm/tinydrm/tinydrm.h>
 
+struct drm_rect;
 struct spi_device;
 struct gpio_desc;
 struct regulator;
@@ -67,6 +68,8 @@ int mipi_dbi_init(struct device *dev, struct mipi_dbi *mipi,
 		  const struct drm_simple_display_pipe_funcs *pipe_funcs,
 		  struct drm_driver *driver,
 		  const struct drm_display_mode *mode, unsigned int rotation);
+void mipi_dbi_pipe_update(struct drm_simple_display_pipe *pipe,
+			  struct drm_plane_state *old_state);
 void mipi_dbi_enable_flush(struct mipi_dbi *mipi,
 			   struct drm_crtc_state *crtc_state,
 			   struct drm_plane_state *plan_state);
@@ -80,7 +83,7 @@ u32 mipi_dbi_spi_cmd_max_speed(struct spi_device *spi, size_t len);
 int mipi_dbi_command_read(struct mipi_dbi *mipi, u8 cmd, u8 *val);
 int mipi_dbi_command_buf(struct mipi_dbi *mipi, u8 cmd, u8 *data, size_t len);
 int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb,
-		      struct drm_clip_rect *clip, bool swap);
+		      struct drm_rect *clip, bool swap);
 /**
  * mipi_dbi_command - MIPI DCS command with optional parameter(s)
  * @mipi: MIPI structure

include/drm/tinydrm/tinydrm-helpers.h

@@ -11,8 +11,8 @@
 #define __LINUX_TINYDRM_HELPERS_H
 
 struct backlight_device;
-struct tinydrm_device;
-struct drm_clip_rect;
+struct drm_framebuffer;
+struct drm_rect;
 struct spi_transfer;
 struct spi_message;
 struct spi_device;
@@ -33,23 +33,15 @@ static inline bool tinydrm_machine_little_endian(void)
 #endif
 }
 
-bool tinydrm_merge_clips(struct drm_clip_rect *dst,
-			 struct drm_clip_rect *src, unsigned int num_clips,
-			 unsigned int flags, u32 max_width, u32 max_height);
-int tinydrm_fb_dirty(struct drm_framebuffer *fb,
-		     struct drm_file *file_priv,
-		     unsigned int flags, unsigned int color,
-		     struct drm_clip_rect *clips,
-		     unsigned int num_clips);
 void tinydrm_memcpy(void *dst, void *vaddr, struct drm_framebuffer *fb,
-		    struct drm_clip_rect *clip);
+		    struct drm_rect *clip);
 void tinydrm_swab16(u16 *dst, void *vaddr, struct drm_framebuffer *fb,
-		    struct drm_clip_rect *clip);
+		    struct drm_rect *clip);
 void tinydrm_xrgb8888_to_rgb565(u16 *dst, void *vaddr,
 				struct drm_framebuffer *fb,
-				struct drm_clip_rect *clip, bool swap);
+				struct drm_rect *clip, bool swap);
 void tinydrm_xrgb8888_to_gray8(u8 *dst, void *vaddr, struct drm_framebuffer *fb,
-			       struct drm_clip_rect *clip);
+			       struct drm_rect *clip);
 
 size_t tinydrm_spi_max_transfer_size(struct spi_device *spi, size_t max_len);
 bool tinydrm_spi_bpw_supported(struct spi_device *spi, u8 bpw);

include/drm/tinydrm/tinydrm.h

@@ -10,14 +10,9 @@
 #ifndef __LINUX_TINYDRM_H
 #define __LINUX_TINYDRM_H
 
-#include <linux/mutex.h>
 #include <drm/drm_simple_kms_helper.h>
 
-struct drm_clip_rect;
 struct drm_driver;
-struct drm_file;
-struct drm_framebuffer;
-struct drm_framebuffer_funcs;
 
 /**
  * struct tinydrm_device - tinydrm device
@@ -32,24 +27,6 @@ struct tinydrm_device {
 	 * @pipe: Display pipe structure
 	 */
 	struct drm_simple_display_pipe pipe;
-
-	/**
-	 * @dirty_lock: Serializes framebuffer flushing
-	 */
-	struct mutex dirty_lock;
-
-	/**
-	 * @fb_funcs: Framebuffer functions used when creating framebuffers
-	 */
-	const struct drm_framebuffer_funcs *fb_funcs;
-
-	/**
-	 * @fb_dirty: Framebuffer dirty callback
-	 */
-	int (*fb_dirty)(struct drm_framebuffer *framebuffer,
-			struct drm_file *file_priv, unsigned flags,
-			unsigned color, struct drm_clip_rect *clips,
-			unsigned num_clips);
 };
 
 static inline struct tinydrm_device *
@@ -82,13 +59,10 @@ pipe_to_tinydrm(struct drm_simple_display_pipe *pipe)
 	.clock = 1 /* pass validation */
 
 int devm_tinydrm_init(struct device *parent, struct tinydrm_device *tdev,
-		      const struct drm_framebuffer_funcs *fb_funcs,
 		      struct drm_driver *driver);
 int devm_tinydrm_register(struct tinydrm_device *tdev);
 void tinydrm_shutdown(struct tinydrm_device *tdev);
 
-void tinydrm_display_pipe_update(struct drm_simple_display_pipe *pipe,
-				 struct drm_plane_state *old_state);
 int
 tinydrm_display_pipe_init(struct tinydrm_device *tdev,
 			  const struct drm_simple_display_pipe_funcs *funcs,

include/linux/dma-fence-array.h

@@ -40,6 +40,7 @@ struct dma_fence_array_cb {
  * @num_fences: number of fences in the array
  * @num_pending: fences in the array still pending
  * @fences: array of the fences
+ * @work: internal irq_work function
  */
 struct dma_fence_array {
 	struct dma_fence base;

include/uapi/drm/drm_fourcc.h

@@ -238,6 +238,8 @@ extern "C" {
 #define DRM_FORMAT_MOD_VENDOR_VIVANTE 0x06
 #define DRM_FORMAT_MOD_VENDOR_BROADCOM 0x07
 #define DRM_FORMAT_MOD_VENDOR_ARM     0x08
+#define DRM_FORMAT_MOD_VENDOR_ALLWINNER 0x09
+
 /* add more to the end as needed */
 
 #define DRM_FORMAT_RESERVED	      ((1ULL << 56) - 1)
@@ -667,6 +669,20 @@ extern "C" {
  */
 #define AFBC_FORMAT_MOD_BCH     (1ULL << 11)
 
+/*
+ * Allwinner tiled modifier
+ *
+ * This tiling mode is implemented by the VPU found on all Allwinner platforms,
+ * codenamed sunxi. It is associated with a YUV format that uses either 2 or 3
+ * planes.
+ *
+ * With this tiling, the luminance samples are disposed in tiles representing
+ * 32x32 pixels and the chrominance samples in tiles representing 32x64 pixels.
+ * The pixel order in each tile is linear and the tiles are disposed linearly,
+ * both in row-major order.
+ */
+#define DRM_FORMAT_MOD_ALLWINNER_TILED fourcc_mod_code(ALLWINNER, 1)
+
 #if defined(__cplusplus)
 }
 #endif