Merge tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "It's been a relatively calm release cycle and we're actually removing
  more code than we're adding.

  Summary:

   - new driver for the Toshiba Visconti platform

   - rework of interrupt handling in gpio-tegra

   - updates for GPIO selftests: we're now using the character device to
     perform the subsystem checks

   - support for a new rcar variant + some code refactoring

   - refactoring of gpio-ep93xx

   - SPDX License identifier has been updated in the uapi header so that
     userspace programs bundling it can become fully REUSE-compliant

   - improvements to pwm handling in gpio-mvebu

   - support for interrupt handling and power management for gpio-xilinx
     as well as some code refactoring

   - support for a new chip variant in gpio-pca953x

   - removal of drivers: zte xs & intel-mid and removal of leftovers
     from intel-msic

   - impovements to intel drivers pulled from Andy Shevchenko

   - improvements to the gpio-aggregator virtual GPIO driver

   - and several minor tweaks and fixes to code and documentation all
     over the place"

* tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits)
  gpio: pcf857x: Fix missing first interrupt
  gpio: ep93xx: refactor base IRQ number
  gpio: ep93xx: refactor ep93xx_gpio_add_bank
  gpio: ep93xx: Fix typo s/hierarchial/hierarchical
  gpio: ep93xx: drop to_irq binding
  gpio: ep93xx: Fix wrong irq numbers in port F
  gpio: uapi: use the preferred SPDX license identifier
  gpio: gpio-xilinx: Add check if width exceeds 32
  gpio: gpio-xilinx: Add support for suspend and resume
  gpio: gpio-xilinx: Add interrupt support
  gpio: gpio-xilinx: Reduce spinlock array to array
  gpio: gpio-xilinx: Simplify with dev_err_probe()
  gpio: msic: Drop driver from Makefile
  gpio: wcove: Split out to_ireg() helper and deduplicate the code
  gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits()
  gpio: wcove: Get rid of error prone casting in IRQ handler
  gpio: intel-mid: Remove driver for deprecated platform
  gpio: msic: Remove driver for deprecated platform
  gpio: aggregator: Remove trailing comma in terminator entries
  gpio: aggregator: Use compound literal from the header
  ...

Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt

@@ -80,6 +80,11 @@ Required properties:
 
 - offset: offset address inside the syscon block
 
+Optional properties:
+
+- marvell,pwm-offset: offset address of PWM duration control registers inside
+  the syscon block
+
 Example:
 ap_syscon: system-controller@6f4000 {
 	compatible = "syscon", "simple-mfd";
@@ -101,6 +106,9 @@ ap_syscon: system-controller@6f4000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-ranges = <&ap_pinctrl 0 0 19>;
+		marvell,pwm-offset = <0x10c0>;
+		#pwm-cells = <2>;
+		clocks = <&ap_clk 3>;
 	};
 };
 

Documentation/devicetree/bindings/gpio/gpio-davinci.txt

@@ -7,6 +7,7 @@ Required Properties:
 			"ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G
 			"ti,am654-gpio", "ti,keystone-gpio": for TI K3 AM654
 			"ti,j721e-gpio", "ti,keystone-gpio": for J721E SoCs
+			"ti,am64-gpio", "ti,keystone-gpio": for AM64 SoCs
 
 - reg: Physical base address of the controller and the size of memory mapped
        registers.

Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml

@@ -32,6 +32,7 @@ properties:
       - maxim,max7327
       - nxp,pca6416
       - nxp,pca9505
+      - nxp,pca9506
       - nxp,pca9534
       - nxp,pca9535
       - nxp,pca9536
@@ -70,7 +71,7 @@ properties:
 
   gpio-line-names:
     minItems: 1
-    maxItems: 32
+    maxItems: 40
 
   interrupts:
     maxItems: 1

Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml

@@ -48,6 +48,9 @@ properties:
               - renesas,gpio-r8a77995     # R-Car D3
           - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
 
+      - items:
+          - const: renesas,gpio-r8a779a0  # R-Car V3U
+
   reg:
     maxItems: 1
 

Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/toshiba,gpio-visconti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti ARM SoCs GPIO controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,gpio-tmpv7708
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-ranges: true
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    description:
+      interrupt mapping one per GPIO.
+    minItems: 16
+    maxItems: 16
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-ranges
+  - gpio-controller
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupt-parent
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interrupt-controller/irq.h>
+      #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+      soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gpio: gpio@28020000 {
+          compatible = "toshiba,gpio-tmpv7708";
+          reg = <0 0x28020000 0 0x1000>;
+          #gpio-cells = <0x2>;
+          gpio-ranges = <&pmux 0 0 32>;
+          gpio-controller;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+          interrupt-parent = <&gic>;
+        };
+      };
+...

Documentation/devicetree/bindings/gpio/zx296702-gpio.txt

-ZTE ZX296702 GPIO controller
-
-Required properties:
-- compatible : "zte,zx296702-gpio"
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters:
-  - bit 0 specifies polarity (0 for normal, 1 for inverted)
-- gpio-controller : Marks the device node as a GPIO controller.
-- interrupts : Interrupt mapping for GPIO IRQ.
-- gpio-ranges : Interaction with the PINCTRL subsystem.
-
-gpio1: gpio@b008040 {
-	compatible = "zte,zx296702-gpio";
-	reg = <0xb008040 0x40>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	gpio-ranges = < &pmx0 0 54 2 &pmx0 2 59 14>;
-	interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-parent = <&intc>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	clock-names = "gpio_pclk";
-	clocks = <&lsp0clk ZX296702_GPIO_CLK>;
-};

Documentation/driver-api/gpio/consumer.rst

@@ -361,12 +361,13 @@ corresponding chip driver. In that case a significantly improved performance
 can be expected. If simultaneous access is not possible the GPIOs will be
 accessed sequentially.
 
-The functions take three arguments:
+The functions take four arguments:
+
 	* array_size	- the number of array elements
 	* desc_array	- an array of GPIO descriptors
 	* array_info	- optional information obtained from gpiod_get_array()
 	* value_bitmap	- a bitmap to store the GPIOs' values (get) or
-			  a bitmap of values to assign to the GPIOs (set)
+          a bitmap of values to assign to the GPIOs (set)
 
 The descriptor array can be obtained using the gpiod_get_array() function
 or one of its variants. If the group of descriptors returned by that function

Documentation/driver-api/gpio/intro.rst

@@ -106,11 +106,11 @@ don't. When you need open drain signaling but your hardware doesn't directly
 support it, there's a common idiom you can use to emulate it with any GPIO pin
 that can be used as either an input or an output:
 
- LOW:	gpiod_direction_output(gpio, 0) ... this drives the signal and overrides
-	the pullup.
+ **LOW**: ``gpiod_direction_output(gpio, 0)`` ... this drives the signal and
+ overrides the pullup.
 
- HIGH:	gpiod_direction_input(gpio) ... this turns off the output, so the pullup
-	(or some other device) controls the signal.
+ **HIGH**: ``gpiod_direction_input(gpio)`` ... this turns off the output, so
+ the pullup (or some other device) controls the signal.
 
 The same logic can be applied to emulate open source signaling, by driving the
 high signal and configuring the GPIO as input for low. This open drain/open

MAINTAINERS

@@ -2609,10 +2609,12 @@ S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti.git
 F:	Documentation/devicetree/bindings/arm/toshiba.yaml
 F:	Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
+F:	Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
 F:	Documentation/devicetree/bindings/pinctrl/toshiba,tmpv7700-pinctrl.yaml
 F:	Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml
 F:	arch/arm64/boot/dts/toshiba/
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
+F:	drivers/gpio/gpio-visconti.c
 F:	drivers/pinctrl/visconti/
 F:	drivers/watchdog/visconti_wdt.c
 N:	visconti

drivers/gpio/Kconfig

@@ -487,11 +487,11 @@ config GPIO_PXA
 	  Say yes here to support the PXA GPIO device
 
 config GPIO_RCAR
-	tristate "Renesas R-Car GPIO"
+	tristate "Renesas R-Car and RZ/G GPIO support"
 	depends on ARCH_RENESAS || COMPILE_TEST
 	select GPIOLIB_IRQCHIP
 	help
-	  Say yes here to support GPIO on Renesas R-Car SoCs.
+	  Say yes here to support GPIO on Renesas R-Car or RZ/G SoCs.
 
 config GPIO_RDA
 	bool "RDA Micro GPIO controller support"
@@ -595,7 +595,7 @@ config GPIO_TB10X
 	select OF_GPIO
 
 config GPIO_TEGRA
-	bool "NVIDIA Tegra GPIO support"
+	tristate "NVIDIA Tegra GPIO support"
 	default ARCH_TEGRA
 	depends on ARCH_TEGRA || COMPILE_TEST
 	depends on OF_GPIO
@@ -648,6 +648,16 @@ config GPIO_VF610
 	help
 	  Say yes here to support Vybrid vf610 GPIOs.
 
+config GPIO_VISCONTI
+	tristate "Toshiba Visconti GPIO support"
+	depends on ARCH_VISCONTI || COMPILE_TEST
+	depends on OF_GPIO
+	select GPIOLIB_IRQCHIP
+	select GPIO_GENERIC
+	select IRQ_DOMAIN_HIERARCHY
+	help
+	  Say yes here to support GPIO on Tohisba Visconti.
+
 config GPIO_VR41XX
 	tristate "NEC VR4100 series General-purpose I/O Uint support"
 	depends on CPU_VR41XX
@@ -670,7 +680,7 @@ config GPIO_WCD934X
 	tristate "Qualcomm Technologies Inc WCD9340/WCD9341 gpio controller driver"
 	depends on MFD_WCD934X && OF_GPIO
 	help
-         This driver is to supprot GPIO block found on the Qualcomm Technologies
+         This driver is to support GPIO block found on the Qualcomm Technologies
 	 Inc WCD9340/WCD9341 Audio Codec.
 
 config GPIO_XGENE
@@ -694,6 +704,8 @@ config GPIO_XGENE_SB
 
 config GPIO_XILINX
 	tristate "Xilinx GPIO support"
+	select GPIOLIB_IRQCHIP
+	depends on OF_GPIO
 	help
 	  Say yes here to support the Xilinx FPGA GPIO device
 
@@ -731,13 +743,6 @@ config GPIO_ZYNQ
 	help
 	  Say yes here to support Xilinx Zynq GPIO controller.
 
-config GPIO_ZX
-	bool "ZTE ZX GPIO support"
-	depends on ARCH_ZX || COMPILE_TEST
-	select GPIOLIB_IRQCHIP
-	help
-	  Say yes here to support the GPIO device on ZTE ZX SoCs.
-
 config GPIO_LOONGSON1
 	tristate "Loongson1 GPIO support"
 	depends on MACH_LOONGSON32
@@ -1623,8 +1628,7 @@ config GPIO_MOCKUP
 	select IRQ_SIM
 	help
 	  This enables GPIO Testing driver, which provides a way to test GPIO
-	  subsystem through sysfs(or char device) and debugfs. GPIO_SYSFS
-	  must be selected for this test.
+	  subsystem through sysfs (or char device) and debugfs.
 	  User could use it through the script in
 	  tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in
 	  it.

drivers/gpio/Makefile

@@ -102,7 +102,6 @@ obj-$(CONFIG_GPIO_MOXTET)		+= gpio-moxtet.o
 obj-$(CONFIG_GPIO_MPC5200)		+= gpio-mpc5200.o
 obj-$(CONFIG_GPIO_MPC8XXX)		+= gpio-mpc8xxx.o
 obj-$(CONFIG_GPIO_MSC313)		+= gpio-msc313.o
-obj-$(CONFIG_GPIO_MSIC)			+= gpio-msic.o
 obj-$(CONFIG_GPIO_MT7621)		+= gpio-mt7621.o
 obj-$(CONFIG_GPIO_MVEBU)		+= gpio-mvebu.o
 obj-$(CONFIG_GPIO_MXC)			+= gpio-mxc.o
@@ -163,6 +162,7 @@ obj-$(CONFIG_GPIO_UCB1400)		+= gpio-ucb1400.o
 obj-$(CONFIG_GPIO_UNIPHIER)		+= gpio-uniphier.o
 obj-$(CONFIG_GPIO_VF610)		+= gpio-vf610.o
 obj-$(CONFIG_GPIO_VIPERBOARD)		+= gpio-viperboard.o
+obj-$(CONFIG_GPIO_VISCONTI)		+= gpio-visconti.o
 obj-$(CONFIG_GPIO_VR41XX)		+= gpio-vr41xx.o
 obj-$(CONFIG_GPIO_VX855)		+= gpio-vx855.o
 obj-$(CONFIG_GPIO_WCD934X)		+= gpio-wcd934x.o
@@ -179,5 +179,4 @@ obj-$(CONFIG_GPIO_XLP)			+= gpio-xlp.o
 obj-$(CONFIG_GPIO_XRA1403)		+= gpio-xra1403.o
 obj-$(CONFIG_GPIO_XTENSA)		+= gpio-xtensa.o
 obj-$(CONFIG_GPIO_ZEVIO)		+= gpio-zevio.o
-obj-$(CONFIG_GPIO_ZX)			+= gpio-zx.o
 obj-$(CONFIG_GPIO_ZYNQ)			+= gpio-zynq.o

drivers/gpio/gpio-aggregator.c

@@ -62,34 +62,6 @@ static char *get_arg(char **args)
 	return start;
 }
 
-static bool isrange(const char *s)
-{
-	size_t n;
-
-	if (IS_ERR_OR_NULL(s))
-		return false;
-
-	while (1) {
-		n = strspn(s, "0123456789");
-		if (!n)
-			return false;
-
-		s += n;
-
-		switch (*s++) {
-		case '\0':
-			return true;
-
-		case '-':
-		case ',':
-			break;
-
-		default:
-			return false;
-		}
-	}
-}
-
 static int aggr_add_gpio(struct gpio_aggregator *aggr, const char *key,
 			 int hwnum, unsigned int *n)
 {
@@ -100,8 +72,7 @@ static int aggr_add_gpio(struct gpio_aggregator *aggr, const char *key,
 	if (!lookups)
 		return -ENOMEM;
 
-	lookups->table[*n] =
-		(struct gpiod_lookup)GPIO_LOOKUP_IDX(key, hwnum, NULL, *n, 0);
+	lookups->table[*n] = GPIO_LOOKUP_IDX(key, hwnum, NULL, *n, 0);
 
 	(*n)++;
 	memset(&lookups->table[*n], 0, sizeof(lookups->table[*n]));
@@ -112,10 +83,10 @@ static int aggr_add_gpio(struct gpio_aggregator *aggr, const char *key,
 
 static int aggr_parse(struct gpio_aggregator *aggr)
 {
+	char *name, *offsets, *p;
 	char *args = aggr->args;
 	unsigned long *bitmap;
 	unsigned int i, n = 0;
-	char *name, *offsets;
 	int error = 0;
 
 	bitmap = bitmap_alloc(ARCH_NR_GPIOS, GFP_KERNEL);
@@ -130,7 +101,8 @@ static int aggr_parse(struct gpio_aggregator *aggr)
 			goto free_bitmap;
 		}
 
-		if (!isrange(offsets)) {
+		p = get_options(offsets, 0, &error);
+		if (error == 0 || *p) {
 			/* Named GPIO line */
 			error = aggr_add_gpio(aggr, name, U16_MAX, &n);
 			if (error)
@@ -271,7 +243,7 @@ static DRIVER_ATTR_WO(delete_device);
 static struct attribute *gpio_aggregator_attrs[] = {
 	&driver_attr_new_device.attr,
 	&driver_attr_delete_device.attr,
-	NULL,
+	NULL
 };
 ATTRIBUTE_GROUPS(gpio_aggregator);
 
@@ -545,7 +517,7 @@ static const struct of_device_id gpio_aggregator_dt_ids[] = {
 	 * Add GPIO-operated devices controlled from userspace below,
 	 * or use "driver_override" in sysfs
 	 */
-	{},
+	{}
 };
 MODULE_DEVICE_TABLE(of, gpio_aggregator_dt_ids);
 #endif

drivers/gpio/gpio-bd70528.c

@@ -12,7 +12,8 @@
 #define GPIO_OUT_REG(offset) (BD70528_REG_GPIO1_OUT + (offset) * 2)
 
 struct bd70528_gpio {
-	struct rohm_regmap_dev chip;
+	struct regmap *regmap;
+	struct device *dev;
 	struct gpio_chip gpio;
 };
 
@@ -35,11 +36,11 @@ static int bd70528_set_debounce(struct bd70528_gpio *bdgpio,
 		val = BD70528_DEBOUNCE_50MS;
 		break;
 	default:
-		dev_err(bdgpio->chip.dev,
+		dev_err(bdgpio->dev,
 			"Invalid debounce value %u\n", debounce);
 		return -EINVAL;
 	}
-	return regmap_update_bits(bdgpio->chip.regmap, GPIO_IN_REG(offset),
+	return regmap_update_bits(bdgpio->regmap, GPIO_IN_REG(offset),
 				 BD70528_DEBOUNCE_MASK, val);
 }
 
@@ -49,9 +50,9 @@ static int bd70528_get_direction(struct gpio_chip *chip, unsigned int offset)
 	int val, ret;
 
 	/* Do we need to do something to IRQs here? */
-	ret = regmap_read(bdgpio->chip.regmap, GPIO_OUT_REG(offset), &val);
+	ret = regmap_read(bdgpio->regmap, GPIO_OUT_REG(offset), &val);
 	if (ret) {
-		dev_err(bdgpio->chip.dev, "Could not read gpio direction\n");
+		dev_err(bdgpio->dev, "Could not read gpio direction\n");
 		return ret;
 	}
 	if (val & BD70528_GPIO_OUT_EN_MASK)
@@ -67,13 +68,13 @@ static int bd70528_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 
 	switch (pinconf_to_config_param(config)) {
 	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-		return regmap_update_bits(bdgpio->chip.regmap,
+		return regmap_update_bits(bdgpio->regmap,
 					  GPIO_OUT_REG(offset),
 					  BD70528_GPIO_DRIVE_MASK,
 					  BD70528_GPIO_OPEN_DRAIN);
 		break;
 	case PIN_CONFIG_DRIVE_PUSH_PULL:
-		return regmap_update_bits(bdgpio->chip.regmap,
+		return regmap_update_bits(bdgpio->regmap,
 					  GPIO_OUT_REG(offset),
 					  BD70528_GPIO_DRIVE_MASK,
 					  BD70528_GPIO_PUSH_PULL);
@@ -93,7 +94,7 @@ static int bd70528_direction_input(struct gpio_chip *chip, unsigned int offset)
 	struct bd70528_gpio *bdgpio = gpiochip_get_data(chip);
 
 	/* Do we need to do something to IRQs here? */
-	return regmap_update_bits(bdgpio->chip.regmap, GPIO_OUT_REG(offset),
+	return regmap_update_bits(bdgpio->regmap, GPIO_OUT_REG(offset),
 				 BD70528_GPIO_OUT_EN_MASK,
 				 BD70528_GPIO_OUT_DISABLE);
 }
@@ -105,10 +106,10 @@ static void bd70528_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	struct bd70528_gpio *bdgpio = gpiochip_get_data(chip);
 	u8 val = (value) ? BD70528_GPIO_OUT_HI : BD70528_GPIO_OUT_LO;
 
-	ret = regmap_update_bits(bdgpio->chip.regmap, GPIO_OUT_REG(offset),
+	ret = regmap_update_bits(bdgpio->regmap, GPIO_OUT_REG(offset),
 				 BD70528_GPIO_OUT_MASK, val);
 	if (ret)
-		dev_err(bdgpio->chip.dev, "Could not set gpio to %d\n", value);
+		dev_err(bdgpio->dev, "Could not set gpio to %d\n", value);
 }
 
 static int bd70528_direction_output(struct gpio_chip *chip, unsigned int offset,
@@ -117,7 +118,7 @@ static int bd70528_direction_output(struct gpio_chip *chip, unsigned int offset,
 	struct bd70528_gpio *bdgpio = gpiochip_get_data(chip);
 
 	bd70528_gpio_set(chip, offset, value);
-	return regmap_update_bits(bdgpio->chip.regmap, GPIO_OUT_REG(offset),
+	return regmap_update_bits(bdgpio->regmap, GPIO_OUT_REG(offset),
 				 BD70528_GPIO_OUT_EN_MASK,
 				 BD70528_GPIO_OUT_ENABLE);
 }
@@ -129,11 +130,11 @@ static int bd70528_gpio_get_o(struct bd70528_gpio *bdgpio, unsigned int offset)
 	int ret;
 	unsigned int val;
 
-	ret = regmap_read(bdgpio->chip.regmap, GPIO_OUT_REG(offset), &val);
+	ret = regmap_read(bdgpio->regmap, GPIO_OUT_REG(offset), &val);
 	if (!ret)
 		ret = !!(val & BD70528_GPIO_OUT_MASK);
 	else
-		dev_err(bdgpio->chip.dev, "GPIO (out) state read failed\n");
+		dev_err(bdgpio->dev, "GPIO (out) state read failed\n");
 
 	return ret;
 }
@@ -143,12 +144,12 @@ static int bd70528_gpio_get_i(struct bd70528_gpio *bdgpio, unsigned int offset)
 	unsigned int val;
 	int ret;
 
-	ret = regmap_read(bdgpio->chip.regmap, BD70528_REG_GPIO_STATE, &val);
+	ret = regmap_read(bdgpio->regmap, BD70528_REG_GPIO_STATE, &val);
 
 	if (!ret)
 		ret = !(val & GPIO_IN_STATE_MASK(offset));
 	else
-		dev_err(bdgpio->chip.dev, "GPIO (in) state read failed\n");
+		dev_err(bdgpio->dev, "GPIO (in) state read failed\n");
 
 	return ret;
 }
@@ -173,29 +174,22 @@ static int bd70528_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	else if (ret == GPIO_LINE_DIRECTION_IN)
 		ret = bd70528_gpio_get_i(bdgpio, offset);
 	else
-		dev_err(bdgpio->chip.dev, "failed to read GPIO direction\n");
+		dev_err(bdgpio->dev, "failed to read GPIO direction\n");
 
 	return ret;
 }
 
 static int bd70528_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct bd70528_gpio *bdgpio;
-	struct rohm_regmap_dev *bd70528;
 	int ret;
 
-	bd70528 = dev_get_drvdata(pdev->dev.parent);
-	if (!bd70528) {
-		dev_err(&pdev->dev, "No MFD driver data\n");
-		return -EINVAL;
-	}
-
-	bdgpio = devm_kzalloc(&pdev->dev, sizeof(*bdgpio),
-			      GFP_KERNEL);
+	bdgpio = devm_kzalloc(dev, sizeof(*bdgpio), GFP_KERNEL);
 	if (!bdgpio)
 		return -ENOMEM;
-	bdgpio->chip.dev = &pdev->dev;
-	bdgpio->gpio.parent = pdev->dev.parent;
+	bdgpio->dev = dev;
+	bdgpio->gpio.parent = dev->parent;
 	bdgpio->gpio.label = "bd70528-gpio";
 	bdgpio->gpio.owner = THIS_MODULE;
 	bdgpio->gpio.get_direction = bd70528_get_direction;
@@ -208,14 +202,15 @@ static int bd70528_probe(struct platform_device *pdev)
 	bdgpio->gpio.ngpio = 4;
 	bdgpio->gpio.base = -1;
 #ifdef CONFIG_OF_GPIO
-	bdgpio->gpio.of_node = pdev->dev.parent->of_node;
+	bdgpio->gpio.of_node = dev->parent->of_node;
 #endif
-	bdgpio->chip.regmap = bd70528->regmap;
+	bdgpio->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!bdgpio->regmap)
+		return -ENODEV;
 
-	ret = devm_gpiochip_add_data(&pdev->dev, &bdgpio->gpio,
-				     bdgpio);
+	ret = devm_gpiochip_add_data(dev, &bdgpio->gpio, bdgpio);
 	if (ret)
-		dev_err(&pdev->dev, "gpio_init: Failed to add bd70528-gpio\n");
+		dev_err(dev, "gpio_init: Failed to add bd70528-gpio\n");
 
 	return ret;
 }

drivers/gpio/gpio-bd71828.c

@@ -11,7 +11,8 @@
 #define HALL_GPIO_OFFSET 3
 
 struct bd71828_gpio {
-	struct rohm_regmap_dev chip;
+	struct regmap *regmap;
+	struct device *dev;
 	struct gpio_chip gpio;
 };
 
@@ -29,10 +30,10 @@ static void bd71828_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	if (offset == HALL_GPIO_OFFSET)
 		return;
 
-	ret = regmap_update_bits(bdgpio->chip.regmap, GPIO_OUT_REG(offset),
+	ret = regmap_update_bits(bdgpio->regmap, GPIO_OUT_REG(offset),
 				 BD71828_GPIO_OUT_MASK, val);
 	if (ret)
-		dev_err(bdgpio->chip.dev, "Could not set gpio to %d\n", value);
+		dev_err(bdgpio->dev, "Could not set gpio to %d\n", value);
 }
 
 static int bd71828_gpio_get(struct gpio_chip *chip, unsigned int offset)
@@ -42,10 +43,10 @@ static int bd71828_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	struct bd71828_gpio *bdgpio = gpiochip_get_data(chip);
 
 	if (offset == HALL_GPIO_OFFSET)
-		ret = regmap_read(bdgpio->chip.regmap, BD71828_REG_IO_STAT,
+		ret = regmap_read(bdgpio->regmap, BD71828_REG_IO_STAT,
 				  &val);
 	else
-		ret = regmap_read(bdgpio->chip.regmap, GPIO_OUT_REG(offset),
+		ret = regmap_read(bdgpio->regmap, GPIO_OUT_REG(offset),
 				  &val);
 	if (!ret)
 		ret = (val & BD71828_GPIO_OUT_MASK);
@@ -63,12 +64,12 @@ static int bd71828_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 
 	switch (pinconf_to_config_param(config)) {
 	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-		return regmap_update_bits(bdgpio->chip.regmap,
+		return regmap_update_bits(bdgpio->regmap,
 					  GPIO_OUT_REG(offset),
 					  BD71828_GPIO_DRIVE_MASK,
 					  BD71828_GPIO_OPEN_DRAIN);
 	case PIN_CONFIG_DRIVE_PUSH_PULL:
-		return regmap_update_bits(bdgpio->chip.regmap,
+		return regmap_update_bits(bdgpio->regmap,
 					  GPIO_OUT_REG(offset),
 					  BD71828_GPIO_DRIVE_MASK,
 					  BD71828_GPIO_PUSH_PULL);
@@ -96,22 +97,15 @@ static int bd71828_get_direction(struct gpio_chip *chip, unsigned int offset)
 
 static int bd71828_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct bd71828_gpio *bdgpio;
-	struct rohm_regmap_dev *bd71828;
 
-	bd71828 = dev_get_drvdata(pdev->dev.parent);
-	if (!bd71828) {
-		dev_err(&pdev->dev, "No MFD driver data\n");
-		return -EINVAL;
-	}
-
-	bdgpio = devm_kzalloc(&pdev->dev, sizeof(*bdgpio),
-			      GFP_KERNEL);
+	bdgpio = devm_kzalloc(dev, sizeof(*bdgpio), GFP_KERNEL);
 	if (!bdgpio)
 		return -ENOMEM;
 
-	bdgpio->chip.dev = &pdev->dev;
-	bdgpio->gpio.parent = pdev->dev.parent;
+	bdgpio->dev = dev;
+	bdgpio->gpio.parent = dev->parent;
 	bdgpio->gpio.label = "bd71828-gpio";
 	bdgpio->gpio.owner = THIS_MODULE;
 	bdgpio->gpio.get_direction = bd71828_get_direction;
@@ -127,11 +121,12 @@ static int bd71828_probe(struct platform_device *pdev)
 	 * "gpio-reserved-ranges" and exclude them from control
 	 */
 	bdgpio->gpio.ngpio = 4;
-	bdgpio->gpio.of_node = pdev->dev.parent->of_node;
-	bdgpio->chip.regmap = bd71828->regmap;
+	bdgpio->gpio.of_node = dev->parent->of_node;
+	bdgpio->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!bdgpio->regmap)
+		return -ENODEV;
 
-	return devm_gpiochip_add_data(&pdev->dev, &bdgpio->gpio,
-				     bdgpio);
+	return devm_gpiochip_add_data(dev, &bdgpio->gpio, bdgpio);
 }
 
 static struct platform_driver bd71828_gpio = {

drivers/gpio/gpio-ep93xx.c

@@ -31,6 +31,8 @@
 /* Maximum value for irq capable line identifiers */
 #define EP93XX_GPIO_LINE_MAX_IRQ 23
 
+#define EP93XX_GPIO_A_IRQ_BASE 64
+#define EP93XX_GPIO_B_IRQ_BASE 72
 /*
  * Static mapping of GPIO bank F IRQS:
  * F0..F7 (16..24) to irq 80..87.
@@ -292,14 +294,14 @@ struct ep93xx_gpio_bank {
 
 static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = {
 	/* Bank A has 8 IRQs */
-	EP93XX_GPIO_BANK("A", 0x00, 0x10, 0x90, 0, true, false, 64),
+	EP93XX_GPIO_BANK("A", 0x00, 0x10, 0x90, 0, true, false, EP93XX_GPIO_A_IRQ_BASE),
 	/* Bank B has 8 IRQs */
-	EP93XX_GPIO_BANK("B", 0x04, 0x14, 0xac, 8, true, false, 72),
+	EP93XX_GPIO_BANK("B", 0x04, 0x14, 0xac, 8, true, false, EP93XX_GPIO_B_IRQ_BASE),
 	EP93XX_GPIO_BANK("C", 0x08, 0x18, 0x00, 40, false, false, 0),
 	EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 0x00, 24, false, false, 0),
 	EP93XX_GPIO_BANK("E", 0x20, 0x24, 0x00, 32, false, false, 0),
 	/* Bank F has 8 IRQs */
-	EP93XX_GPIO_BANK("F", 0x30, 0x34, 0x4c, 16, false, true, 0),
+	EP93XX_GPIO_BANK("F", 0x30, 0x34, 0x4c, 16, false, true, EP93XX_GPIO_F_IRQ_BASE),
 	EP93XX_GPIO_BANK("G", 0x38, 0x3c, 0x00, 48, false, false, 0),
 	EP93XX_GPIO_BANK("H", 0x40, 0x44, 0x00, 56, false, false, 0),
 };
@@ -318,11 +320,6 @@ static int ep93xx_gpio_set_config(struct gpio_chip *gc, unsigned offset,
 	return 0;
 }
 
-static int ep93xx_gpio_f_to_irq(struct gpio_chip *gc, unsigned offset)
-{
-	return EP93XX_GPIO_F_IRQ_BASE + offset;
-}
-
 static void ep93xx_init_irq_chip(struct device *dev, struct irq_chip *ic)
 {
 	ic->irq_ack = ep93xx_gpio_irq_ack;
@@ -375,7 +372,7 @@ static int ep93xx_gpio_add_bank(struct ep93xx_gpio_chip *egc,
 
 		girq->parent_handler = ep93xx_gpio_ab_irq_handler;
 		girq->num_parents = 1;
-		girq->parents = devm_kcalloc(dev, 1,
+		girq->parents = devm_kcalloc(dev, girq->num_parents,
 					     sizeof(*girq->parents),
 					     GFP_KERNEL);
 		if (!girq->parents)
@@ -393,20 +390,19 @@ static int ep93xx_gpio_add_bank(struct ep93xx_gpio_chip *egc,
 
 		/*
 		 * FIXME: convert this to use hierarchical IRQ support!
-		 * this requires fixing the root irqchip to be hierarchial.
+		 * this requires fixing the root irqchip to be hierarchical.
 		 */
 		girq->parent_handler = ep93xx_gpio_f_irq_handler;
 		girq->num_parents = 8;
-		girq->parents = devm_kcalloc(dev, 8,
+		girq->parents = devm_kcalloc(dev, girq->num_parents,
 					     sizeof(*girq->parents),
 					     GFP_KERNEL);
 		if (!girq->parents)
 			return -ENOMEM;
 		/* Pick resources 1..8 for these IRQs */
-		for (i = 1; i <= 8; i++)
-			girq->parents[i - 1] = platform_get_irq(pdev, i);
-		for (i = 0; i < 8; i++) {
-			gpio_irq = EP93XX_GPIO_F_IRQ_BASE + i;
+		for (i = 0; i < girq->num_parents; i++) {
+			girq->parents[i] = platform_get_irq(pdev, i + 1);
+			gpio_irq = bank->irq_base + i;
 			irq_set_chip_data(gpio_irq, &epg->gc[5]);
 			irq_set_chip_and_handler(gpio_irq,
 						 girq->chip,
@@ -415,7 +411,7 @@ static int ep93xx_gpio_add_bank(struct ep93xx_gpio_chip *egc,
 		}
 		girq->default_type = IRQ_TYPE_NONE;
 		girq->handler = handle_level_irq;
-		gc->to_irq = ep93xx_gpio_f_to_irq;
+		girq->first = bank->irq_base;
 	}
 
 	return devm_gpiochip_add_data(dev, gc, epg);

drivers/gpio/gpio-max77620.c

@@ -325,7 +325,7 @@ static int max77620_gpio_probe(struct platform_device *pdev)
 	girq->parents = NULL;
 	girq->default_type = IRQ_TYPE_NONE;
 	girq->handler = handle_edge_irq;
-	girq->init_hw = max77620_gpio_irq_init_hw,
+	girq->init_hw = max77620_gpio_irq_init_hw;
 	girq->threaded = true;
 
 	platform_set_drvdata(pdev, mgpio);

drivers/gpio/gpio-merrifield.c

@@ -194,6 +194,11 @@ static int mrfld_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 {
 	u32 debounce;
 
+	if ((pinconf_to_config_param(config) == PIN_CONFIG_BIAS_DISABLE) ||
+	    (pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_UP) ||
+	    (pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_DOWN))
+		return gpiochip_generic_config(chip, offset, config);
+
 	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
 		return -ENOTSUPP;
 

drivers/gpio/gpio-mvebu.c

@@ -70,7 +70,12 @@
  */
 #define PWM_BLINK_ON_DURATION_OFF	0x0
 #define PWM_BLINK_OFF_DURATION_OFF	0x4
+#define PWM_BLINK_COUNTER_B_OFF		0x8
 
+/* Armada 8k variant gpios register offsets */
+#define AP80X_GPIO0_OFF_A8K		0x1040
+#define CP11X_GPIO0_OFF_A8K		0x100
+#define CP11X_GPIO1_OFF_A8K		0x140
 
 /* The MV78200 has per-CPU registers for edge mask and level mask */
 #define GPIO_EDGE_MASK_MV78200_OFF(cpu)	  ((cpu) ? 0x30 : 0x18)
@@ -93,6 +98,7 @@
 
 struct mvebu_pwm {
 	struct regmap		*regs;
+	u32			 offset;
 	unsigned long		 clk_rate;
 	struct gpio_desc	*gpiod;
 	struct pwm_chip		 chip;
@@ -283,12 +289,12 @@ mvebu_gpio_write_level_mask(struct mvebu_gpio_chip *mvchip, u32 val)
  */
 static unsigned int mvebu_pwmreg_blink_on_duration(struct mvebu_pwm *mvpwm)
 {
-	return PWM_BLINK_ON_DURATION_OFF;
+	return mvpwm->offset + PWM_BLINK_ON_DURATION_OFF;
 }
 
 static unsigned int mvebu_pwmreg_blink_off_duration(struct mvebu_pwm *mvpwm)
 {
-	return PWM_BLINK_OFF_DURATION_OFF;
+	return mvpwm->offset + PWM_BLINK_OFF_DURATION_OFF;
 }
 
 /*
@@ -667,26 +673,21 @@ static void mvebu_pwm_get_state(struct pwm_chip *chip,
 	spin_lock_irqsave(&mvpwm->lock, flags);
 
 	regmap_read(mvpwm->regs, mvebu_pwmreg_blink_on_duration(mvpwm), &u);
-	val = (unsigned long long) u * NSEC_PER_SEC;
-	do_div(val, mvpwm->clk_rate);
-	if (val > UINT_MAX)
-		state->duty_cycle = UINT_MAX;
-	else if (val)
-		state->duty_cycle = val;
+	/* Hardware treats zero as 2^32. See mvebu_pwm_apply(). */
+	if (u > 0)
+		val = u;
 	else
-		state->duty_cycle = 1;
+		val = UINT_MAX + 1ULL;
+	state->duty_cycle = DIV_ROUND_UP_ULL(val * NSEC_PER_SEC,
+			mvpwm->clk_rate);
 
-	val = (unsigned long long) u; /* on duration */
 	regmap_read(mvpwm->regs, mvebu_pwmreg_blink_off_duration(mvpwm), &u);
-	val += (unsigned long long) u; /* period = on + off duration */
-	val *= NSEC_PER_SEC;
-	do_div(val, mvpwm->clk_rate);
-	if (val > UINT_MAX)
-		state->period = UINT_MAX;
-	else if (val)
-		state->period = val;
+	/* period = on + off duration */
+	if (u > 0)
+		val += u;
 	else
-		state->period = 1;
+		val += UINT_MAX + 1ULL;
+	state->period = DIV_ROUND_UP_ULL(val * NSEC_PER_SEC, mvpwm->clk_rate);
 
 	regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset, &u);
 	if (u)
@@ -708,19 +709,27 @@ static int mvebu_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	val = (unsigned long long) mvpwm->clk_rate * state->duty_cycle;
 	do_div(val, NSEC_PER_SEC);
-	if (val > UINT_MAX)
+	if (val > UINT_MAX + 1ULL)
 		return -EINVAL;
-	if (val)
+	/*
+	 * Zero on/off values don't work as expected. Experimentation shows
+	 * that zero value is treated as 2^32. This behavior is not documented.
+	 */
+	if (val == UINT_MAX + 1ULL)
+		on = 0;
+	else if (val)
 		on = val;
 	else
 		on = 1;
 
-	val = (unsigned long long) mvpwm->clk_rate *
-		(state->period - state->duty_cycle);
+	val = (unsigned long long) mvpwm->clk_rate * state->period;
 	do_div(val, NSEC_PER_SEC);
-	if (val > UINT_MAX)
+	val -= on;
+	if (val > UINT_MAX + 1ULL)
 		return -EINVAL;
-	if (val)
+	if (val == UINT_MAX + 1ULL)
+		off = 0;
+	else if (val)
 		off = val;
 	else
 		off = 1;
@@ -778,51 +787,80 @@ static int mvebu_pwm_probe(struct platform_device *pdev,
 	struct device *dev = &pdev->dev;
 	struct mvebu_pwm *mvpwm;
 	void __iomem *base;
+	u32 offset;
 	u32 set;
 
-	if (!of_device_is_compatible(mvchip->chip.of_node,
-				     "marvell,armada-370-gpio"))
-		return 0;
-
-	/*
-	 * There are only two sets of PWM configuration registers for
-	 * all the GPIO lines on those SoCs which this driver reserves
-	 * for the first two GPIO chips. So if the resource is missing
-	 * we can't treat it as an error.
-	 */
-	if (!platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm"))
+	if (of_device_is_compatible(mvchip->chip.of_node,
+				    "marvell,armada-370-gpio")) {
+		/*
+		 * There are only two sets of PWM configuration registers for
+		 * all the GPIO lines on those SoCs which this driver reserves
+		 * for the first two GPIO chips. So if the resource is missing
+		 * we can't treat it as an error.
+		 */
+		if (!platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm"))
+			return 0;
+		offset = 0;
+	} else if (mvchip->soc_variant == MVEBU_GPIO_SOC_VARIANT_A8K) {
+		int ret = of_property_read_u32(dev->of_node,
+					       "marvell,pwm-offset", &offset);
+		if (ret < 0)
+			return 0;
+	} else {
 		return 0;
+	}
 
 	if (IS_ERR(mvchip->clk))
 		return PTR_ERR(mvchip->clk);
 
-	/*
-	 * Use set A for lines of GPIO chip with id 0, B for GPIO chip
-	 * with id 1. Don't allow further GPIO chips to be used for PWM.
-	 */
-	if (id == 0)
-		set = 0;
-	else if (id == 1)
-		set = U32_MAX;
-	else
-		return -EINVAL;
-	regmap_write(mvchip->regs,
-		     GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset, set);
-
 	mvpwm = devm_kzalloc(dev, sizeof(struct mvebu_pwm), GFP_KERNEL);
 	if (!mvpwm)
 		return -ENOMEM;
 	mvchip->mvpwm = mvpwm;
 	mvpwm->mvchip = mvchip;
+	mvpwm->offset = offset;
+
+	if (mvchip->soc_variant == MVEBU_GPIO_SOC_VARIANT_A8K) {
+		mvpwm->regs = mvchip->regs;
+
+		switch (mvchip->offset) {
+		case AP80X_GPIO0_OFF_A8K:
+		case CP11X_GPIO0_OFF_A8K:
+			/* Blink counter A */
+			set = 0;
+			break;
+		case CP11X_GPIO1_OFF_A8K:
+			/* Blink counter B */
+			set = U32_MAX;
+			mvpwm->offset += PWM_BLINK_COUNTER_B_OFF;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		base = devm_platform_ioremap_resource_byname(pdev, "pwm");
+		if (IS_ERR(base))
+			return PTR_ERR(base);
 
-	base = devm_platform_ioremap_resource_byname(pdev, "pwm");
-	if (IS_ERR(base))
-		return PTR_ERR(base);
+		mvpwm->regs = devm_regmap_init_mmio(&pdev->dev, base,
+						    &mvebu_gpio_regmap_config);
+		if (IS_ERR(mvpwm->regs))
+			return PTR_ERR(mvpwm->regs);
 
-	mvpwm->regs = devm_regmap_init_mmio(&pdev->dev, base,
-					    &mvebu_gpio_regmap_config);
-	if (IS_ERR(mvpwm->regs))
-		return PTR_ERR(mvpwm->regs);
+		/*
+		 * Use set A for lines of GPIO chip with id 0, B for GPIO chip
+		 * with id 1. Don't allow further GPIO chips to be used for PWM.
+		 */
+		if (id == 0)
+			set = 0;
+		else if (id == 1)
+			set = U32_MAX;
+		else
+			return -EINVAL;
+	}
+
+	regmap_write(mvchip->regs,
+		     GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset, set);
 
 	mvpwm->clk_rate = clk_get_rate(mvchip->clk);
 	if (!mvpwm->clk_rate) {

drivers/gpio/gpio-pca953x.c

@@ -73,6 +73,7 @@
 static const struct i2c_device_id pca953x_id[] = {
 	{ "pca6416", 16 | PCA953X_TYPE | PCA_INT, },
 	{ "pca9505", 40 | PCA953X_TYPE | PCA_INT, },
+	{ "pca9506", 40 | PCA953X_TYPE | PCA_INT, },
 	{ "pca9534", 8  | PCA953X_TYPE | PCA_INT, },
 	{ "pca9535", 16 | PCA953X_TYPE | PCA_INT, },
 	{ "pca9536", 4  | PCA953X_TYPE, },
@@ -1236,6 +1237,7 @@ static int pca953x_resume(struct device *dev)
 static const struct of_device_id pca953x_dt_ids[] = {
 	{ .compatible = "nxp,pca6416", .data = OF_953X(16, PCA_INT), },
 	{ .compatible = "nxp,pca9505", .data = OF_953X(40, PCA_INT), },
+	{ .compatible = "nxp,pca9506", .data = OF_953X(40, PCA_INT), },
 	{ .compatible = "nxp,pca9534", .data = OF_953X( 8, PCA_INT), },
 	{ .compatible = "nxp,pca9535", .data = OF_953X(16, PCA_INT), },
 	{ .compatible = "nxp,pca9536", .data = OF_953X( 4, 0), },

drivers/gpio/gpio-pcf857x.c

@@ -332,7 +332,7 @@ static int pcf857x_probe(struct i2c_client *client,
 	 * reset state.  Otherwise it flags pins to be driven low.
 	 */
 	gpio->out = ~n_latch;
-	gpio->status = gpio->out;
+	gpio->status = gpio->read(gpio->client);
 
 	/* Enable irqchip if we have an interrupt */
 	if (client->irq) {

drivers/gpio/gpio-rcar.c

@@ -35,6 +35,8 @@ struct gpio_rcar_bank_info {
 struct gpio_rcar_info {
 	bool has_outdtsel;
 	bool has_both_edge_trigger;
+	bool has_always_in;
+	bool has_inen;
 };
 
 struct gpio_rcar_priv {
@@ -62,6 +64,7 @@ struct gpio_rcar_priv {
 #define FILONOFF	0x28	/* Chattering Prevention On/Off Register */
 #define OUTDTSEL	0x40	/* Output Data Select Register */
 #define BOTHEDGE	0x4c	/* One Edge/Both Edge Select Register */
+#define INEN		0x50	/* General Input Enable Register */
 
 #define RCAR_MAX_GPIO_PER_BANK		32
 
@@ -302,9 +305,11 @@ static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset)
 	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
 	u32 bit = BIT(offset);
 
-	/* testing on r8a7790 shows that INDT does not show correct pin state
-	 * when configured as output, so use OUTDT in case of output pins */
-	if (gpio_rcar_read(p, INOUTSEL) & bit)
+	/*
+	 * Before R-Car Gen3, INDT does not show correct pin state when
+	 * configured as output, so use OUTDT in case of output pins
+	 */
+	if (!p->info.has_always_in && (gpio_rcar_read(p, INOUTSEL) & bit))
 		return !!(gpio_rcar_read(p, OUTDT) & bit);
 	else
 		return !!(gpio_rcar_read(p, INDT) & bit);
@@ -324,6 +329,11 @@ static int gpio_rcar_get_multiple(struct gpio_chip *chip, unsigned long *mask,
 	if (!bankmask)
 		return 0;
 
+	if (p->info.has_always_in) {
+		bits[0] = gpio_rcar_read(p, INDT) & bankmask;
+		return 0;
+	}
+
 	spin_lock_irqsave(&p->lock, flags);
 	outputs = gpio_rcar_read(p, INOUTSEL);
 	m = outputs & bankmask;
@@ -383,41 +393,35 @@ static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset,
 static const struct gpio_rcar_info gpio_rcar_info_gen1 = {
 	.has_outdtsel = false,
 	.has_both_edge_trigger = false,
+	.has_always_in = false,
+	.has_inen = false,
 };
 
 static const struct gpio_rcar_info gpio_rcar_info_gen2 = {
 	.has_outdtsel = true,
 	.has_both_edge_trigger = true,
+	.has_always_in = false,
+	.has_inen = false,
+};
+
+static const struct gpio_rcar_info gpio_rcar_info_gen3 = {
+	.has_outdtsel = true,
+	.has_both_edge_trigger = true,
+	.has_always_in = true,
+	.has_inen = false,
+};
+
+static const struct gpio_rcar_info gpio_rcar_info_v3u = {
+	.has_outdtsel = true,
+	.has_both_edge_trigger = true,
+	.has_always_in = true,
+	.has_inen = true,
 };
 
 static const struct of_device_id gpio_rcar_of_table[] = {
 	{
-		.compatible = "renesas,gpio-r8a7743",
-		/* RZ/G1 GPIO is identical to R-Car Gen2. */
-		.data = &gpio_rcar_info_gen2,
-	}, {
-		.compatible = "renesas,gpio-r8a7790",
-		.data = &gpio_rcar_info_gen2,
-	}, {
-		.compatible = "renesas,gpio-r8a7791",
-		.data = &gpio_rcar_info_gen2,
-	}, {
-		.compatible = "renesas,gpio-r8a7792",
-		.data = &gpio_rcar_info_gen2,
-	}, {
-		.compatible = "renesas,gpio-r8a7793",
-		.data = &gpio_rcar_info_gen2,
-	}, {
-		.compatible = "renesas,gpio-r8a7794",
-		.data = &gpio_rcar_info_gen2,
-	}, {
-		.compatible = "renesas,gpio-r8a7795",
-		/* Gen3 GPIO is identical to Gen2. */
-		.data = &gpio_rcar_info_gen2,
-	}, {
-		.compatible = "renesas,gpio-r8a7796",
-		/* Gen3 GPIO is identical to Gen2. */
-		.data = &gpio_rcar_info_gen2,
+		.compatible = "renesas,gpio-r8a779a0",
+		.data = &gpio_rcar_info_v3u,
 	}, {
 		.compatible = "renesas,rcar-gen1-gpio",
 		.data = &gpio_rcar_info_gen1,
@@ -426,8 +430,7 @@ static const struct of_device_id gpio_rcar_of_table[] = {
 		.data = &gpio_rcar_info_gen2,
 	}, {
 		.compatible = "renesas,rcar-gen3-gpio",
-		/* Gen3 GPIO is identical to Gen2. */
-		.data = &gpio_rcar_info_gen2,
+		.data = &gpio_rcar_info_gen3,
 	}, {
 		.compatible = "renesas,gpio-rcar",
 		.data = &gpio_rcar_info_gen1,
@@ -460,6 +463,17 @@ static int gpio_rcar_parse_dt(struct gpio_rcar_priv *p, unsigned int *npins)
 	return 0;
 }
 
+static void gpio_rcar_enable_inputs(struct gpio_rcar_priv *p)
+{
+	u32 mask = GENMASK(p->gpio_chip.ngpio - 1, 0);
+
+	/* Select "Input Enable" in INEN */
+	if (p->gpio_chip.valid_mask)
+		mask &= p->gpio_chip.valid_mask[0];
+	if (mask)
+		gpio_rcar_write(p, INEN, gpio_rcar_read(p, INEN) | mask);
+}
+
 static int gpio_rcar_probe(struct platform_device *pdev)
 {
 	struct gpio_rcar_priv *p;
@@ -549,6 +563,12 @@ static int gpio_rcar_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
+	if (p->info.has_inen) {
+		pm_runtime_get_sync(p->dev);
+		gpio_rcar_enable_inputs(p);
+		pm_runtime_put(p->dev);
+	}
+
 	dev_info(dev, "driving %d GPIOs\n", npins);
 
 	return 0;
@@ -624,6 +644,9 @@ static int gpio_rcar_resume(struct device *dev)
 		}
 	}
 
+	if (p->info.has_inen)
+		gpio_rcar_enable_inputs(p);
+
 	return 0;
 }
 #endif /* CONFIG_PM_SLEEP*/

drivers/gpio/gpio-sl28cpld.c

@@ -65,13 +65,13 @@ static int sl28cpld_gpio_irq_init(struct platform_device *pdev,
 	if (!irq_chip)
 		return -ENOMEM;
 
-	irq_chip->name = "sl28cpld-gpio-irq",
+	irq_chip->name = "sl28cpld-gpio-irq";
 	irq_chip->irqs = sl28cpld_gpio_irqs;
 	irq_chip->num_irqs = ARRAY_SIZE(sl28cpld_gpio_irqs);
 	irq_chip->num_regs = 1;
 	irq_chip->status_base = base + GPIO_REG_IP;
 	irq_chip->mask_base = base + GPIO_REG_IE;
-	irq_chip->mask_invert = true,
+	irq_chip->mask_invert = true;
 	irq_chip->ack_base = base + GPIO_REG_IP;
 
 	ret = devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev),

drivers/gpio/gpio-tegra186.c

@@ -657,7 +657,7 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
 	gpio->gpio.get_direction = tegra186_gpio_get_direction;
 	gpio->gpio.direction_input = tegra186_gpio_direction_input;
 	gpio->gpio.direction_output = tegra186_gpio_direction_output;
-	gpio->gpio.get = tegra186_gpio_get,
+	gpio->gpio.get = tegra186_gpio_get;
 	gpio->gpio.set = tegra186_gpio_set;
 	gpio->gpio.set_config = tegra186_gpio_set_config;
 	gpio->gpio.add_pin_ranges = tegra186_gpio_add_pin_ranges;

drivers/gpio/gpio-visconti.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Toshiba Visconti GPIO Support
+ *
+ * (C) Copyright 2020 Toshiba Electronic Devices & Storage Corporation
+ * (C) Copyright 2020 TOSHIBA CORPORATION
+ *
+ * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+
+/* register offset */
+#define GPIO_DIR	0x00
+#define GPIO_IDATA	0x08
+#define GPIO_ODATA	0x10
+#define GPIO_OSET	0x18
+#define GPIO_OCLR	0x20
+#define GPIO_INTMODE	0x30
+
+#define BASE_HW_IRQ 24
+
+struct visconti_gpio {
+	void __iomem *base;
+	spinlock_t lock; /* protect gpio register */
+	struct gpio_chip gpio_chip;
+	struct irq_chip irq_chip;
+};
+
+static int visconti_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct visconti_gpio *priv = gpiochip_get_data(gc);
+	u32 offset = irqd_to_hwirq(d);
+	u32 bit = BIT(offset);
+	u32 intc_type = IRQ_TYPE_EDGE_RISING;
+	u32 intmode, odata;
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	odata = readl(priv->base + GPIO_ODATA);
+	intmode = readl(priv->base + GPIO_INTMODE);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		odata &= ~bit;
+		intmode &= ~bit;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		odata |= bit;
+		intmode &= ~bit;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		intmode |= bit;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		intc_type = IRQ_TYPE_LEVEL_HIGH;
+		odata &= ~bit;
+		intmode &= ~bit;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		intc_type = IRQ_TYPE_LEVEL_HIGH;
+		odata |= bit;
+		intmode &= ~bit;
+		break;
+	default:
+		ret = -EINVAL;
+		goto err;
+	}
+
+	writel(odata, priv->base + GPIO_ODATA);
+	writel(intmode, priv->base + GPIO_INTMODE);
+	irq_set_irq_type(offset, intc_type);
+
+	ret = irq_chip_set_type_parent(d, type);
+err:
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return ret;
+}
+
+static int visconti_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
+					       unsigned int child,
+					       unsigned int child_type,
+					       unsigned int *parent,
+					       unsigned int *parent_type)
+{
+	/* Interrupts 0..15 mapped to interrupts 24..39 on the GIC */
+	if (child < 16) {
+		/* All these interrupts are level high in the CPU */
+		*parent_type = IRQ_TYPE_LEVEL_HIGH;
+		*parent = child + BASE_HW_IRQ;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static void *visconti_gpio_populate_parent_fwspec(struct gpio_chip *chip,
+						  unsigned int parent_hwirq,
+						  unsigned int parent_type)
+{
+	struct irq_fwspec *fwspec;
+
+	fwspec = kmalloc(sizeof(*fwspec), GFP_KERNEL);
+	if (!fwspec)
+		return NULL;
+
+	fwspec->fwnode = chip->irq.parent_domain->fwnode;
+	fwspec->param_count = 3;
+	fwspec->param[0] = 0;
+	fwspec->param[1] = parent_hwirq;
+	fwspec->param[2] = parent_type;
+
+	return fwspec;
+}
+
+static int visconti_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct visconti_gpio *priv;
+	struct irq_chip *irq_chip;
+	struct gpio_irq_chip *girq;
+	struct irq_domain *parent;
+	struct device_node *irq_parent;
+	struct fwnode_handle *fwnode;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	irq_parent = of_irq_find_parent(dev->of_node);
+	if (!irq_parent) {
+		dev_err(dev, "No IRQ parent node\n");
+		return -ENODEV;
+	}
+
+	parent = irq_find_host(irq_parent);
+	if (!parent) {
+		dev_err(dev, "No IRQ parent domain\n");
+		return -ENODEV;
+	}
+
+	fwnode = of_node_to_fwnode(irq_parent);
+	of_node_put(irq_parent);
+
+	ret = bgpio_init(&priv->gpio_chip, dev, 4,
+			 priv->base + GPIO_IDATA,
+			 priv->base + GPIO_OSET,
+			 priv->base + GPIO_OCLR,
+			 priv->base + GPIO_DIR,
+			 NULL,
+			 0);
+	if (ret) {
+		dev_err(dev, "unable to init generic GPIO\n");
+		return ret;
+	}
+
+	irq_chip = &priv->irq_chip;
+	irq_chip->name = dev_name(dev);
+	irq_chip->irq_mask = irq_chip_mask_parent;
+	irq_chip->irq_unmask = irq_chip_unmask_parent;
+	irq_chip->irq_eoi = irq_chip_eoi_parent;
+	irq_chip->irq_set_type = visconti_gpio_irq_set_type;
+	irq_chip->flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND;
+
+	girq = &priv->gpio_chip.irq;
+	girq->chip = irq_chip;
+	girq->fwnode = fwnode;
+	girq->parent_domain = parent;
+	girq->child_to_parent_hwirq = visconti_gpio_child_to_parent_hwirq;
+	girq->populate_parent_alloc_arg = visconti_gpio_populate_parent_fwspec;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_level_irq;
+
+	ret = devm_gpiochip_add_data(dev, &priv->gpio_chip, priv);
+	if (ret) {
+		dev_err(dev, "failed to add GPIO chip\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return ret;
+}
+
+static const struct of_device_id visconti_gpio_of_match[] = {
+	{ .compatible = "toshiba,gpio-tmpv7708", },
+	{ /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, visconti_gpio_of_match);
+
+static struct platform_driver visconti_gpio_driver = {
+	.probe		= visconti_gpio_probe,
+	.driver		= {
+		.name	= "visconti_gpio",
+		.of_match_table = of_match_ptr(visconti_gpio_of_match),
+	}
+};
+module_platform_driver(visconti_gpio_driver);
+
+MODULE_AUTHOR("Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>");
+MODULE_DESCRIPTION("Toshiba Visconti GPIO Driver");
+MODULE_LICENSE("GPL v2");

drivers/gpio/gpio-vx855.c

@@ -216,7 +216,7 @@ static void vx855gpio_gpio_setup(struct vx855_gpio *vg)
 	c->direction_output = vx855gpio_direction_output;
 	c->get = vx855gpio_get;
 	c->set = vx855gpio_set;
-	c->set_config = vx855gpio_set_config,
+	c->set_config = vx855gpio_set_config;
 	c->dbg_show = NULL;
 	c->base = 0;
 	c->ngpio = NR_VX855_GP;

drivers/gpio/gpio-wcove.c

@@ -73,6 +73,8 @@
 enum ctrl_register {
 	CTRL_IN,
 	CTRL_OUT,
+	IRQ_STATUS,
+	IRQ_MASK,
 };
 
 /*
@@ -112,22 +114,29 @@ static inline int to_reg(int gpio, enum ctrl_register reg_type)
 	return reg;
 }
 
-static void wcove_update_irq_mask(struct wcove_gpio *wg, int gpio)
+static inline int to_ireg(int gpio, enum ctrl_register type, unsigned int *mask)
 {
-	unsigned int reg, mask;
+	unsigned int reg = type == IRQ_STATUS ? IRQ_STATUS_BASE : IRQ_MASK_BASE;
 
 	if (gpio < GROUP0_NR_IRQS) {
-		reg = IRQ_MASK_BASE;
-		mask = BIT(gpio % GROUP0_NR_IRQS);
+		reg += 0;
+		*mask = BIT(gpio);
 	} else {
-		reg = IRQ_MASK_BASE + 1;
-		mask = BIT((gpio - GROUP0_NR_IRQS) % GROUP1_NR_IRQS);
+		reg += 1;
+		*mask = BIT(gpio - GROUP0_NR_IRQS);
 	}
 
+	return reg;
+}
+
+static void wcove_update_irq_mask(struct wcove_gpio *wg, int gpio)
+{
+	unsigned int mask, reg = to_ireg(gpio, IRQ_MASK, &mask);
+
 	if (wg->set_irq_mask)
-		regmap_update_bits(wg->regmap, reg, mask, mask);
+		regmap_set_bits(wg->regmap, reg, mask);
 	else
-		regmap_update_bits(wg->regmap, reg, mask, 0);
+		regmap_clear_bits(wg->regmap, reg, mask);
 }
 
 static void wcove_update_irq_ctrl(struct wcove_gpio *wg, int gpio)
@@ -207,9 +216,9 @@ static void wcove_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
 		return;
 
 	if (value)
-		regmap_update_bits(wg->regmap, reg, 1, 1);
+		regmap_set_bits(wg->regmap, reg, 1);
 	else
-		regmap_update_bits(wg->regmap, reg, 1, 0);
+		regmap_clear_bits(wg->regmap, reg, 1);
 }
 
 static int wcove_gpio_set_config(struct gpio_chip *chip, unsigned int gpio,
@@ -324,7 +333,8 @@ static struct irq_chip wcove_irqchip = {
 static irqreturn_t wcove_gpio_irq_handler(int irq, void *data)
 {
 	struct wcove_gpio *wg = (struct wcove_gpio *)data;
-	unsigned int pending, virq, gpio, mask, offset;
+	unsigned int virq, gpio;
+	unsigned long pending;
 	u8 p[2];
 
 	if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) {
@@ -339,15 +349,12 @@ static irqreturn_t wcove_gpio_irq_handler(int irq, void *data)
 	/* Iterate until no interrupt is pending */
 	while (pending) {
 		/* One iteration is for all pending bits */
-		for_each_set_bit(gpio, (const unsigned long *)&pending,
-						 WCOVE_GPIO_NUM) {
-			offset = (gpio > GROUP0_NR_IRQS) ? 1 : 0;
-			mask = (offset == 1) ? BIT(gpio - GROUP0_NR_IRQS) :
-								BIT(gpio);
+		for_each_set_bit(gpio, &pending, WCOVE_GPIO_NUM) {
+			unsigned int mask, reg = to_ireg(gpio, IRQ_STATUS, &mask);
+
 			virq = irq_find_mapping(wg->chip.irq.domain, gpio);
 			handle_nested_irq(virq);
-			regmap_update_bits(wg->regmap, IRQ_STATUS_BASE + offset,
-								mask, mask);
+			regmap_set_bits(wg->regmap, reg, mask);
 		}
 
 		/* Next iteration */
@@ -367,30 +374,26 @@ static void wcove_gpio_dbg_show(struct seq_file *s,
 {
 	unsigned int ctlo, ctli, irq_mask, irq_status;
 	struct wcove_gpio *wg = gpiochip_get_data(chip);
-	int gpio, offset, group, ret = 0;
+	int gpio, mask, ret = 0;
 
 	for (gpio = 0; gpio < WCOVE_GPIO_NUM; gpio++) {
-		group = gpio < GROUP0_NR_IRQS ? 0 : 1;
 		ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_OUT), &ctlo);
 		ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_IN), &ctli);
-		ret += regmap_read(wg->regmap, IRQ_MASK_BASE + group,
-							&irq_mask);
-		ret += regmap_read(wg->regmap, IRQ_STATUS_BASE + group,
-							&irq_status);
+		ret += regmap_read(wg->regmap, to_ireg(gpio, IRQ_MASK, &mask), &irq_mask);
+		ret += regmap_read(wg->regmap, to_ireg(gpio, IRQ_STATUS, &mask), &irq_status);
 		if (ret) {
 			pr_err("Failed to read registers: ctrl out/in or irq status/mask\n");
 			break;
 		}
 
-		offset = gpio % 8;
 		seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s\n",
 			   gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
 			   ctli & 0x1 ? "hi" : "lo",
 			   ctli & CTLI_INTCNT_NE ? "fall" : "    ",
 			   ctli & CTLI_INTCNT_PE ? "rise" : "    ",
 			   ctlo,
-			   irq_mask & BIT(offset) ? "mask  " : "unmask",
-			   irq_status & BIT(offset) ? "pending" : "       ");
+			   irq_mask & mask ? "mask  " : "unmask",
+			   irq_status & mask ? "pending" : "       ");
 	}
 }
 
@@ -434,7 +437,7 @@ static int wcove_gpio_probe(struct platform_device *pdev)
 	wg->chip.get_direction = wcove_gpio_get_direction;
 	wg->chip.get = wcove_gpio_get;
 	wg->chip.set = wcove_gpio_set;
-	wg->chip.set_config = wcove_gpio_set_config,
+	wg->chip.set_config = wcove_gpio_set_config;
 	wg->chip.base = -1;
 	wg->chip.ngpio = WCOVE_VGPIO_NUM;
 	wg->chip.can_sleep = true;
@@ -473,14 +476,12 @@ static int wcove_gpio_probe(struct platform_device *pdev)
 	}
 
 	/* Enable GPIO0 interrupts */
-	ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE, GPIO_IRQ0_MASK,
-				 0x00);
+	ret = regmap_clear_bits(wg->regmap, IRQ_MASK_BASE + 0, GPIO_IRQ0_MASK);
 	if (ret)
 		return ret;
 
 	/* Enable GPIO1 interrupts */
-	ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE + 1, GPIO_IRQ1_MASK,
-				 0x00);
+	ret = regmap_clear_bits(wg->regmap, IRQ_MASK_BASE + 1, GPIO_IRQ1_MASK);
 	if (ret)
 		return ret;
 

drivers/gpio/gpio-zx.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * ZTE ZX296702 GPIO driver
- *
- * Author: Jun Nie <jun.nie@linaro.org>
- *
- * Copyright (C) 2015 Linaro Ltd.
- */
-#include <linux/bitops.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/gpio/driver.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/pinctrl/consumer.h>
-#include <linux/platform_device.h>
-#include <linux/pm.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-
-#define ZX_GPIO_DIR	0x00
-#define ZX_GPIO_IVE	0x04
-#define ZX_GPIO_IV	0x08
-#define ZX_GPIO_IEP	0x0C
-#define ZX_GPIO_IEN	0x10
-#define ZX_GPIO_DI	0x14
-#define ZX_GPIO_DO1	0x18
-#define ZX_GPIO_DO0	0x1C
-#define ZX_GPIO_DO	0x20
-
-#define ZX_GPIO_IM	0x28
-#define ZX_GPIO_IE	0x2C
-
-#define ZX_GPIO_MIS	0x30
-#define ZX_GPIO_IC	0x34
-
-#define ZX_GPIO_NR	16
-
-struct zx_gpio {
-	raw_spinlock_t		lock;
-
-	void __iomem		*base;
-	struct gpio_chip	gc;
-};
-
-static int zx_direction_input(struct gpio_chip *gc, unsigned offset)
-{
-	struct zx_gpio *chip = gpiochip_get_data(gc);
-	unsigned long flags;
-	u16 gpiodir;
-
-	if (offset >= gc->ngpio)
-		return -EINVAL;
-
-	raw_spin_lock_irqsave(&chip->lock, flags);
-	gpiodir = readw_relaxed(chip->base + ZX_GPIO_DIR);
-	gpiodir &= ~BIT(offset);
-	writew_relaxed(gpiodir, chip->base + ZX_GPIO_DIR);
-	raw_spin_unlock_irqrestore(&chip->lock, flags);
-
-	return 0;
-}
-
-static int zx_direction_output(struct gpio_chip *gc, unsigned offset,
-		int value)
-{
-	struct zx_gpio *chip = gpiochip_get_data(gc);
-	unsigned long flags;
-	u16 gpiodir;
-
-	if (offset >= gc->ngpio)
-		return -EINVAL;
-
-	raw_spin_lock_irqsave(&chip->lock, flags);
-	gpiodir = readw_relaxed(chip->base + ZX_GPIO_DIR);
-	gpiodir |= BIT(offset);
-	writew_relaxed(gpiodir, chip->base + ZX_GPIO_DIR);
-
-	if (value)
-		writew_relaxed(BIT(offset), chip->base + ZX_GPIO_DO1);
-	else
-		writew_relaxed(BIT(offset), chip->base + ZX_GPIO_DO0);
-	raw_spin_unlock_irqrestore(&chip->lock, flags);
-
-	return 0;
-}
-
-static int zx_get_value(struct gpio_chip *gc, unsigned offset)
-{
-	struct zx_gpio *chip = gpiochip_get_data(gc);
-
-	return !!(readw_relaxed(chip->base + ZX_GPIO_DI) & BIT(offset));
-}
-
-static void zx_set_value(struct gpio_chip *gc, unsigned offset, int value)
-{
-	struct zx_gpio *chip = gpiochip_get_data(gc);
-
-	if (value)
-		writew_relaxed(BIT(offset), chip->base + ZX_GPIO_DO1);
-	else
-		writew_relaxed(BIT(offset), chip->base + ZX_GPIO_DO0);
-}
-
-static int zx_irq_type(struct irq_data *d, unsigned trigger)
-{
-	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct zx_gpio *chip = gpiochip_get_data(gc);
-	int offset = irqd_to_hwirq(d);
-	unsigned long flags;
-	u16 gpiois, gpioi_epos, gpioi_eneg, gpioiev;
-	u16 bit = BIT(offset);
-
-	if (offset < 0 || offset >= ZX_GPIO_NR)
-		return -EINVAL;
-
-	raw_spin_lock_irqsave(&chip->lock, flags);
-
-	gpioiev = readw_relaxed(chip->base + ZX_GPIO_IV);
-	gpiois = readw_relaxed(chip->base + ZX_GPIO_IVE);
-	gpioi_epos = readw_relaxed(chip->base + ZX_GPIO_IEP);
-	gpioi_eneg = readw_relaxed(chip->base + ZX_GPIO_IEN);
-
-	if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
-		gpiois |= bit;
-		if (trigger & IRQ_TYPE_LEVEL_HIGH)
-			gpioiev |= bit;
-		else
-			gpioiev &= ~bit;
-	} else
-		gpiois &= ~bit;
-
-	if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
-		gpioi_epos |= bit;
-		gpioi_eneg |= bit;
-	} else {
-		if (trigger & IRQ_TYPE_EDGE_RISING) {
-			gpioi_epos |= bit;
-			gpioi_eneg &= ~bit;
-		} else if (trigger & IRQ_TYPE_EDGE_FALLING) {
-			gpioi_eneg |= bit;
-			gpioi_epos &= ~bit;
-		}
-	}
-
-	writew_relaxed(gpiois, chip->base + ZX_GPIO_IVE);
-	writew_relaxed(gpioi_epos, chip->base + ZX_GPIO_IEP);
-	writew_relaxed(gpioi_eneg, chip->base + ZX_GPIO_IEN);
-	writew_relaxed(gpioiev, chip->base + ZX_GPIO_IV);
-	raw_spin_unlock_irqrestore(&chip->lock, flags);
-
-	return 0;
-}
-
-static void zx_irq_handler(struct irq_desc *desc)
-{
-	unsigned long pending;
-	int offset;
-	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
-	struct zx_gpio *chip = gpiochip_get_data(gc);
-	struct irq_chip *irqchip = irq_desc_get_chip(desc);
-
-	chained_irq_enter(irqchip, desc);
-
-	pending = readw_relaxed(chip->base + ZX_GPIO_MIS);
-	writew_relaxed(pending, chip->base + ZX_GPIO_IC);
-	if (pending) {
-		for_each_set_bit(offset, &pending, ZX_GPIO_NR)
-			generic_handle_irq(irq_find_mapping(gc->irq.domain,
-							    offset));
-	}
-
-	chained_irq_exit(irqchip, desc);
-}
-
-static void zx_irq_mask(struct irq_data *d)
-{
-	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct zx_gpio *chip = gpiochip_get_data(gc);
-	u16 mask = BIT(irqd_to_hwirq(d) % ZX_GPIO_NR);
-	u16 gpioie;
-
-	raw_spin_lock(&chip->lock);
-	gpioie = readw_relaxed(chip->base + ZX_GPIO_IM) | mask;
-	writew_relaxed(gpioie, chip->base + ZX_GPIO_IM);
-	gpioie = readw_relaxed(chip->base + ZX_GPIO_IE) & ~mask;
-	writew_relaxed(gpioie, chip->base + ZX_GPIO_IE);
-	raw_spin_unlock(&chip->lock);
-}
-
-static void zx_irq_unmask(struct irq_data *d)
-{
-	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct zx_gpio *chip = gpiochip_get_data(gc);
-	u16 mask = BIT(irqd_to_hwirq(d) % ZX_GPIO_NR);
-	u16 gpioie;
-
-	raw_spin_lock(&chip->lock);
-	gpioie = readw_relaxed(chip->base + ZX_GPIO_IM) & ~mask;
-	writew_relaxed(gpioie, chip->base + ZX_GPIO_IM);
-	gpioie = readw_relaxed(chip->base + ZX_GPIO_IE) | mask;
-	writew_relaxed(gpioie, chip->base + ZX_GPIO_IE);
-	raw_spin_unlock(&chip->lock);
-}
-
-static struct irq_chip zx_irqchip = {
-	.name		= "zx-gpio",
-	.irq_mask	= zx_irq_mask,
-	.irq_unmask	= zx_irq_unmask,
-	.irq_set_type	= zx_irq_type,
-};
-
-static int zx_gpio_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct zx_gpio *chip;
-	struct gpio_irq_chip *girq;
-	int irq, id, ret;
-
-	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
-	if (!chip)
-		return -ENOMEM;
-
-	chip->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(chip->base))
-		return PTR_ERR(chip->base);
-
-	id = of_alias_get_id(dev->of_node, "gpio");
-
-	raw_spin_lock_init(&chip->lock);
-	chip->gc.request = gpiochip_generic_request;
-	chip->gc.free = gpiochip_generic_free;
-	chip->gc.direction_input = zx_direction_input;
-	chip->gc.direction_output = zx_direction_output;
-	chip->gc.get = zx_get_value;
-	chip->gc.set = zx_set_value;
-	chip->gc.base = ZX_GPIO_NR * id;
-	chip->gc.ngpio = ZX_GPIO_NR;
-	chip->gc.label = dev_name(dev);
-	chip->gc.parent = dev;
-	chip->gc.owner = THIS_MODULE;
-
-	/*
-	 * irq_chip support
-	 */
-	writew_relaxed(0xffff, chip->base + ZX_GPIO_IM);
-	writew_relaxed(0, chip->base + ZX_GPIO_IE);
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
-	girq = &chip->gc.irq;
-	girq->chip = &zx_irqchip;
-	girq->parent_handler = zx_irq_handler;
-	girq->num_parents = 1;
-	girq->parents = devm_kcalloc(&pdev->dev, 1,
-				     sizeof(*girq->parents),
-				     GFP_KERNEL);
-	if (!girq->parents)
-		return -ENOMEM;
-	girq->parents[0] = irq;
-	girq->default_type = IRQ_TYPE_NONE;
-	girq->handler = handle_simple_irq;
-
-	ret = gpiochip_add_data(&chip->gc, chip);
-	if (ret)
-		return ret;
-
-	platform_set_drvdata(pdev, chip);
-	dev_info(dev, "ZX GPIO chip registered\n");
-
-	return 0;
-}
-
-static const struct of_device_id zx_gpio_match[] = {
-	{
-		.compatible = "zte,zx296702-gpio",
-	},
-	{ },
-};
-
-static struct platform_driver zx_gpio_driver = {
-	.probe		= zx_gpio_probe,
-	.driver = {
-		.name	= "zx_gpio",
-		.of_match_table = of_match_ptr(zx_gpio_match),
-	},
-};
-builtin_platform_driver(zx_gpio_driver)

drivers/pinctrl/visconti/pinctrl-common.c

@@ -245,11 +245,34 @@ static int visconti_set_mux(struct pinctrl_dev *pctldev,
 	return 0;
 }
 
+static int visconti_gpio_request_enable(struct pinctrl_dev *pctldev,
+				      struct pinctrl_gpio_range *range,
+				      unsigned int pin)
+{
+	struct visconti_pinctrl *priv = pinctrl_dev_get_drvdata(pctldev);
+	const struct visconti_mux *gpio_mux = &priv->devdata->gpio_mux[pin];
+	unsigned long flags;
+	unsigned int val;
+
+	dev_dbg(priv->dev, "%s: pin = %d\n", __func__, pin);
+
+	/* update mux */
+	spin_lock_irqsave(&priv->lock, flags);
+	val = readl(priv->base + gpio_mux->offset);
+	val &= ~gpio_mux->mask;
+	val |= gpio_mux->val;
+	writel(val, priv->base + gpio_mux->offset);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
 static const struct pinmux_ops visconti_pinmux_ops = {
 	.get_functions_count	= visconti_get_functions_count,
 	.get_function_name	= visconti_get_function_name,
 	.get_function_groups	= visconti_get_function_groups,
 	.set_mux		= visconti_set_mux,
+	.gpio_request_enable	= visconti_gpio_request_enable,
 	.strict			= true,
 };
 

include/linux/gpio/machine.h

@@ -75,7 +75,7 @@ struct gpiod_hog {
  * gpiod_get_index()
  */
 #define GPIO_LOOKUP_IDX(_key, _chip_hwnum, _con_id, _idx, _flags)         \
-{                                                                         \
+(struct gpiod_lookup) {                                                   \
 	.key = _key,                                                      \
 	.chip_hwnum = _chip_hwnum,                                        \
 	.con_id = _con_id,                                                \
@@ -87,7 +87,7 @@ struct gpiod_hog {
  * Simple definition of a single GPIO hog in an array.
  */
 #define GPIO_HOG(_chip_label, _chip_hwnum, _line_name, _lflags, _dflags)  \
-{                                                                         \
+(struct gpiod_hog) {                                                      \
 	.chip_label = _chip_label,                                        \
 	.chip_hwnum = _chip_hwnum,                                        \
 	.line_name = _line_name,                                          \

include/uapi/linux/gpio.h

-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
 /*
  * <linux/gpio.h> - userspace ABI for the GPIO character devices
  *
@@ -212,7 +212,7 @@ struct gpio_v2_line_request {
  * @offset: the local offset on this GPIO chip, fill this in when
  * requesting the line information from the kernel
  * @num_attrs: the number of attributes in @attrs
- * @flags: flags for the GPIO lines, with values from &enum
+ * @flags: flags for this GPIO line, with values from &enum
  * gpio_v2_line_flag, such as %GPIO_V2_LINE_FLAG_ACTIVE_LOW,
  * %GPIO_V2_LINE_FLAG_OUTPUT etc, added together.
  * @attrs: the configuration attributes associated with the line

lib/cmdline.c

@@ -83,7 +83,7 @@ EXPORT_SYMBOL(get_option);
  *	get_options - Parse a string into a list of integers
  *	@str: String to be parsed
  *	@nints: size of integer array
- *	@ints: integer array
+ *	@ints: integer array (must have room for at least one element)
  *
  *	This function parses a string containing a comma-separated
  *	list of integers, a hyphen-separated range of _positive_ integers,
@@ -91,6 +91,14 @@ EXPORT_SYMBOL(get_option);
  *	full, or when no more numbers can be retrieved from the
  *	string.
  *
+ *	When @nints is 0, the function just validates the given @str and
+ *	returns the amount of parseable integers as described below.
+ *
+ *	Returns:
+ *
+ *	The first element is filled by the number of collected integers
+ *	in the range. The rest is what was parsed from the @str.
+ *
  *	Return value is the character in the string which caused
  *	the parse to end (typically a null terminator, if @str is
  *	completely parseable).
@@ -98,15 +106,20 @@ EXPORT_SYMBOL(get_option);
 
 char *get_options(const char *str, int nints, int *ints)
 {
+	bool validate = (nints == 0);
 	int res, i = 1;
 
-	while (i < nints) {
-		res = get_option((char **)&str, ints + i);
+	while (i < nints || validate) {
+		int *pint = validate ? ints : ints + i;
+
+		res = get_option((char **)&str, pint);
 		if (res == 0)
 			break;
 		if (res == 3) {
+			int n = validate ? 0 : nints - i;
 			int range_nums;
-			range_nums = get_range((char **)&str, ints + i, nints - i);
+
+			range_nums = get_range((char **)&str, pint, n);
 			if (range_nums < 0)
 				break;
 			/*

lib/cmdline_kunit.c

@@ -18,6 +18,26 @@ static const int cmdline_test_values[] = {
 	1, 3, 2, 1, 1, 1, 3, 1,
 };
 
+static_assert(ARRAY_SIZE(cmdline_test_strings) == ARRAY_SIZE(cmdline_test_values));
+
+static const char *cmdline_test_range_strings[] = {
+	"-7" , "--7"  , "-1-2"    , "7--9",
+	"7-" , "-7--9", "7-9,"    , "9-7" ,
+	"5-a", "a-5"  , "5-8"     , ",8-5",
+	"+,1", "-,4"  , "-3,0-1,6", "4,-" ,
+	" +2", " -9"  , "0-1,-3,6", "- 9" ,
+};
+
+static const int cmdline_test_range_values[][16] = {
+	{ 1, -7, }, { 0, -0, }, { 4, -1, 0, +1, 2, }, { 0, 7, },
+	{ 0, +7, }, { 0, -7, }, { 3, +7, 8, +9, 0, }, { 0, 9, },
+	{ 0, +5, }, { 0, -0, }, { 4, +5, 6, +7, 8, }, { 0, 0, },
+	{ 0, +0, }, { 0, -0, }, { 4, -3, 0, +1, 6, }, { 1, 4, },
+	{ 0, +0, }, { 0, -0, }, { 4, +0, 1, -3, 6, }, { 0, 0, },
+};
+
+static_assert(ARRAY_SIZE(cmdline_test_range_strings) == ARRAY_SIZE(cmdline_test_range_values));
+
 static void cmdline_do_one_test(struct kunit *test, const char *in, int rc, int offset)
 {
 	const char *fmt = "Pattern: %s";
@@ -84,10 +104,46 @@ static void cmdline_test_tail_int(struct kunit *test)
 	} while (++i < ARRAY_SIZE(cmdline_test_strings));
 }
 
+static void cmdline_do_one_range_test(struct kunit *test, const char *in,
+				      unsigned int n, const int *e)
+{
+	unsigned int i;
+	int r[16];
+	int *p;
+
+	memset(r, 0, sizeof(r));
+	get_options(in, ARRAY_SIZE(r), r);
+	KUNIT_EXPECT_EQ_MSG(test, r[0], e[0], "in test %u (parsed) expected %d numbers, got %d",
+			    n, e[0], r[0]);
+	for (i = 1; i < ARRAY_SIZE(r); i++)
+		KUNIT_EXPECT_EQ_MSG(test, r[i], e[i], "in test %u at %u", n, i);
+
+	memset(r, 0, sizeof(r));
+	get_options(in, 0, r);
+	KUNIT_EXPECT_EQ_MSG(test, r[0], e[0], "in test %u (validated) expected %d numbers, got %d",
+			    n, e[0], r[0]);
+
+	p = memchr_inv(&r[1], 0, sizeof(r) - sizeof(r[0]));
+	KUNIT_EXPECT_PTR_EQ_MSG(test, p, (int *)0, "in test %u at %u out of bound", n, p - r);
+}
+
+static void cmdline_test_range(struct kunit *test)
+{
+	unsigned int i = 0;
+
+	do {
+		const char *str = cmdline_test_range_strings[i];
+		const int *e = cmdline_test_range_values[i];
+
+		cmdline_do_one_range_test(test, str, i, e);
+	} while (++i < ARRAY_SIZE(cmdline_test_range_strings));
+}
+
 static struct kunit_case cmdline_test_cases[] = {
 	KUNIT_CASE(cmdline_test_noint),
 	KUNIT_CASE(cmdline_test_lead_int),
 	KUNIT_CASE(cmdline_test_tail_int),
+	KUNIT_CASE(cmdline_test_range),
 	{}
 };
 

tools/gpio/gpio-utils.c

@@ -32,74 +32,6 @@
  * following api will request gpio lines, do the operation and then
  * release these lines.
  */
-/**
- * gpiotools_request_linehandle() - request gpio lines in a gpiochip
- * @device_name:	The name of gpiochip without prefix "/dev/",
- *			such as "gpiochip0"
- * @lines:		An array desired lines, specified by offset
- *			index for the associated GPIO device.
- * @num_lines:		The number of lines to request.
- * @flag:		The new flag for requsted gpio. Reference
- *			"linux/gpio.h" for the meaning of flag.
- * @data:		Default value will be set to gpio when flag is
- *			GPIOHANDLE_REQUEST_OUTPUT.
- * @consumer_label:	The name of consumer, such as "sysfs",
- *			"powerkey". This is useful for other users to
- *			know who is using.
- *
- * Request gpio lines through the ioctl provided by chardev. User
- * could call gpiotools_set_values() and gpiotools_get_values() to
- * read and write respectively through the returned fd. Call
- * gpiotools_release_linehandle() to release these lines after that.
- *
- * Return:		On success return the fd;
- *			On failure return the errno.
- */
-int gpiotools_request_linehandle(const char *device_name, unsigned int *lines,
-				 unsigned int num_lines, unsigned int flag,
-				 struct gpiohandle_data *data,
-				 const char *consumer_label)
-{
-	struct gpiohandle_request req;
-	char *chrdev_name;
-	int fd;
-	int i;
-	int ret;
-
-	ret = asprintf(&chrdev_name, "/dev/%s", device_name);
-	if (ret < 0)
-		return -ENOMEM;
-
-	fd = open(chrdev_name, 0);
-	if (fd == -1) {
-		ret = -errno;
-		fprintf(stderr, "Failed to open %s, %s\n",
-			chrdev_name, strerror(errno));
-		goto exit_free_name;
-	}
-
-	for (i = 0; i < num_lines; i++)
-		req.lineoffsets[i] = lines[i];
-
-	req.flags = flag;
-	strcpy(req.consumer_label, consumer_label);
-	req.lines = num_lines;
-	if (flag & GPIOHANDLE_REQUEST_OUTPUT)
-		memcpy(req.default_values, data, sizeof(req.default_values));
-
-	ret = ioctl(fd, GPIO_GET_LINEHANDLE_IOCTL, &req);
-	if (ret == -1) {
-		ret = -errno;
-		fprintf(stderr, "Failed to issue %s (%d), %s\n",
-			"GPIO_GET_LINEHANDLE_IOCTL", ret, strerror(errno));
-	}
-
-	if (close(fd) == -1)
-		perror("Failed to close GPIO character device file");
-exit_free_name:
-	free(chrdev_name);
-	return ret < 0 ? ret : req.fd;
-}
 
 /**
  * gpiotools_request_line() - request gpio lines in a gpiochip
@@ -215,27 +147,6 @@ int gpiotools_get_values(const int fd, struct gpio_v2_line_values *values)
 	return ret;
 }
 
-/**
- * gpiotools_release_linehandle(): Release the line(s) of gpiochip
- * @fd:			The fd returned by
- *			gpiotools_request_linehandle().
- *
- * Return:		On success return 0;
- *			On failure return the errno.
- */
-int gpiotools_release_linehandle(const int fd)
-{
-	int ret;
-
-	ret = close(fd);
-	if (ret == -1) {
-		perror("Failed to close GPIO LINEHANDLE device file");
-		ret = -errno;
-	}
-
-	return ret;
-}
-
 /**
  * gpiotools_release_line(): Release the line(s) of gpiochip
  * @fd:			The fd returned by

tools/gpio/gpio-utils.h

@@ -24,12 +24,6 @@ static inline int check_prefix(const char *str, const char *prefix)
 		strncmp(str, prefix, strlen(prefix)) == 0;
 }
 
-int gpiotools_request_linehandle(const char *device_name, unsigned int *lines,
-				 unsigned int num_lines, unsigned int flag,
-				 struct gpiohandle_data *data,
-				 const char *consumer_label);
-int gpiotools_release_linehandle(const int fd);
-
 int gpiotools_request_line(const char *device_name,
 			   unsigned int *lines,
 			   unsigned int num_lines,

tools/testing/selftests/Makefile

@@ -126,15 +126,6 @@ ARCH           ?= $(SUBARCH)
 export KSFT_KHDR_INSTALL_DONE := 1
 export BUILD
 
-# build and run gpio when output directory is the src dir.
-# gpio has dependency on tools/gpio and builds tools/gpio
-# objects in the src directory in all cases making the src
-# repo dirty even when objects are relocated.
-ifneq (1,$(DEFAULT_INSTALL_HDR_PATH))
-	TMP := $(filter-out gpio, $(TARGETS))
-	TARGETS := $(TMP)
-endif
-
 # set default goal to all, so make without a target runs all, even when
 # all isn't the first target in the file.
 .DEFAULT_GOAL := all

tools/testing/selftests/gpio/Makefile

 # SPDX-License-Identifier: GPL-2.0
 
-VAR_CFLAGS := $(shell pkg-config --cflags mount 2>/dev/null)
-VAR_LDLIBS := $(shell pkg-config --libs mount 2>/dev/null)
-ifeq ($(VAR_LDLIBS),)
-VAR_LDLIBS := -lmount -I/usr/include/libmount
-endif
-
-CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(VAR_CFLAGS)
-LDLIBS += $(VAR_LDLIBS)
-
 TEST_PROGS := gpio-mockup.sh
 TEST_FILES := gpio-mockup-sysfs.sh
-TEST_GEN_PROGS_EXTENDED := gpio-mockup-chardev
+TEST_GEN_PROGS_EXTENDED := gpio-mockup-cdev
 
-KSFT_KHDR_INSTALL := 1
 include ../lib.mk
-
-GPIODIR := $(realpath ../../../gpio)
-GPIOOUT := $(OUTPUT)/tools-gpio/
-GPIOOBJ := $(GPIOOUT)/gpio-utils.o
-
-CLEAN += ; $(RM) -rf $(GPIOOUT)
-
-$(TEST_GEN_PROGS_EXTENDED): $(GPIOOBJ)
-
-$(GPIOOUT):
-	mkdir -p $@
-
-$(GPIOOBJ): $(GPIOOUT)
-	$(MAKE) OUTPUT=$(GPIOOUT) -C $(GPIODIR)

tools/testing/selftests/gpio/config

 CONFIG_GPIOLIB=y
+CONFIG_GPIO_CDEV=y
 CONFIG_GPIO_MOCKUP=m

tools/testing/selftests/gpio/gpio-mockup-cdev.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * GPIO mockup cdev test helper
+ *
+ * Copyright (C) 2020 Kent Gibson
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/ioctl.h>
+#include <linux/gpio.h>
+
+#define CONSUMER	"gpio-mockup-cdev"
+
+static int request_line_v2(int cfd, unsigned int offset,
+			   uint64_t flags, unsigned int val)
+{
+	struct gpio_v2_line_request req;
+	int ret;
+
+	memset(&req, 0, sizeof(req));
+	req.num_lines = 1;
+	req.offsets[0] = offset;
+	req.config.flags = flags;
+	strcpy(req.consumer, CONSUMER);
+	if (flags & GPIO_V2_LINE_FLAG_OUTPUT) {
+		req.config.num_attrs = 1;
+		req.config.attrs[0].mask = 1;
+		req.config.attrs[0].attr.id = GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES;
+		if (val)
+			req.config.attrs[0].attr.values = 1;
+	}
+	ret = ioctl(cfd, GPIO_V2_GET_LINE_IOCTL, &req);
+	if (ret == -1)
+		return -errno;
+	return req.fd;
+}
+
+
+static int get_value_v2(int lfd)
+{
+	struct gpio_v2_line_values vals;
+	int ret;
+
+	memset(&vals, 0, sizeof(vals));
+	vals.mask = 1;
+	ret = ioctl(lfd, GPIO_V2_LINE_GET_VALUES_IOCTL, &vals);
+	if (ret == -1)
+		return -errno;
+	return vals.bits & 0x1;
+}
+
+static int request_line_v1(int cfd, unsigned int offset,
+			   uint32_t flags, unsigned int val)
+{
+	struct gpiohandle_request req;
+	int ret;
+
+	memset(&req, 0, sizeof(req));
+	req.lines = 1;
+	req.lineoffsets[0] = offset;
+	req.flags = flags;
+	strcpy(req.consumer_label, CONSUMER);
+	if (flags & GPIOHANDLE_REQUEST_OUTPUT)
+		req.default_values[0] = val;
+
+	ret = ioctl(cfd, GPIO_GET_LINEHANDLE_IOCTL, &req);
+	if (ret == -1)
+		return -errno;
+	return req.fd;
+}
+
+static int get_value_v1(int lfd)
+{
+	struct gpiohandle_data vals;
+	int ret;
+
+	memset(&vals, 0, sizeof(vals));
+	ret = ioctl(lfd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, &vals);
+	if (ret == -1)
+		return -errno;
+	return vals.values[0];
+}
+
+static void usage(char *prog)
+{
+	printf("Usage: %s [-l] [-b <bias>] [-s <value>] [-u <uAPI>] <gpiochip> <offset>\n", prog);
+	printf("        -b: set line bias to one of pull-down, pull-up, disabled\n");
+	printf("               (default is to leave bias unchanged):\n");
+	printf("        -l: set line active low (default is active high)\n");
+	printf("        -s: set line value (default is to get line value)\n");
+	printf("        -u: uAPI version to use (default is 2)\n");
+	exit(-1);
+}
+
+static int wait_signal(void)
+{
+	int sig;
+	sigset_t wset;
+
+	sigemptyset(&wset);
+	sigaddset(&wset, SIGHUP);
+	sigaddset(&wset, SIGINT);
+	sigaddset(&wset, SIGTERM);
+	sigwait(&wset, &sig);
+
+	return sig;
+}
+
+int main(int argc, char *argv[])
+{
+	char *chip;
+	int opt, ret, cfd, lfd;
+	unsigned int offset, val, abiv;
+	uint32_t flags_v1;
+	uint64_t flags_v2;
+
+	abiv = 2;
+	ret = 0;
+	flags_v1 = GPIOHANDLE_REQUEST_INPUT;
+	flags_v2 = GPIO_V2_LINE_FLAG_INPUT;
+
+	while ((opt = getopt(argc, argv, "lb:s:u:")) != -1) {
+		switch (opt) {
+		case 'l':
+			flags_v1 |= GPIOHANDLE_REQUEST_ACTIVE_LOW;
+			flags_v2 |= GPIO_V2_LINE_FLAG_ACTIVE_LOW;
+			break;
+		case 'b':
+			if (strcmp("pull-up", optarg) == 0) {
+				flags_v1 |= GPIOHANDLE_REQUEST_BIAS_PULL_UP;
+				flags_v2 |= GPIO_V2_LINE_FLAG_BIAS_PULL_UP;
+			} else if (strcmp("pull-down", optarg) == 0) {
+				flags_v1 |= GPIOHANDLE_REQUEST_BIAS_PULL_DOWN;
+				flags_v2 |= GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN;
+			} else if (strcmp("disabled", optarg) == 0) {
+				flags_v1 |= GPIOHANDLE_REQUEST_BIAS_DISABLE;
+				flags_v2 |= GPIO_V2_LINE_FLAG_BIAS_DISABLED;
+			}
+			break;
+		case 's':
+			val = atoi(optarg);
+			flags_v1 &= ~GPIOHANDLE_REQUEST_INPUT;
+			flags_v1 |= GPIOHANDLE_REQUEST_OUTPUT;
+			flags_v2 &= ~GPIO_V2_LINE_FLAG_INPUT;
+			flags_v2 |= GPIO_V2_LINE_FLAG_OUTPUT;
+			break;
+		case 'u':
+			abiv = atoi(optarg);
+			break;
+		default:
+			usage(argv[0]);
+		}
+	}
+
+	if (argc < optind + 2)
+		usage(argv[0]);
+
+	chip = argv[optind];
+	offset = atoi(argv[optind + 1]);
+
+	cfd = open(chip, 0);
+	if (cfd == -1) {
+		fprintf(stderr, "Failed to open %s: %s\n", chip, strerror(errno));
+		return -errno;
+	}
+
+	if (abiv == 1)
+		lfd = request_line_v1(cfd, offset, flags_v1, val);
+	else
+		lfd = request_line_v2(cfd, offset, flags_v2, val);
+
+	close(cfd);
+
+	if (lfd < 0) {
+		fprintf(stderr, "Failed to request %s:%d: %s\n", chip, offset, strerror(-lfd));
+		return lfd;
+	}
+
+	if (flags_v2 & GPIO_V2_LINE_FLAG_OUTPUT) {
+		wait_signal();
+	} else {
+		if (abiv == 1)
+			ret = get_value_v1(lfd);
+		else
+			ret = get_value_v2(lfd);
+	}
+
+	close(lfd);
+
+	return ret;
+}

tools/testing/selftests/gpio/gpio-mockup-chardev.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * GPIO chardev test helper
- *
- * Copyright (C) 2016 Bamvor Jian Zhang
- */
-
-#define _GNU_SOURCE
-#include <unistd.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-#include <fcntl.h>
-#include <getopt.h>
-#include <sys/ioctl.h>
-#include <libmount.h>
-#include <err.h>
-#include <dirent.h>
-#include <linux/gpio.h>
-#include "../../../gpio/gpio-utils.h"
-
-#define CONSUMER	"gpio-selftest"
-#define	GC_NUM		10
-enum direction {
-	OUT,
-	IN
-};
-
-static int get_debugfs(char **path)
-{
-	struct libmnt_context *cxt;
-	struct libmnt_table *tb;
-	struct libmnt_iter *itr = NULL;
-	struct libmnt_fs *fs;
-	int found = 0, ret;
-
-	cxt = mnt_new_context();
-	if (!cxt)
-		err(EXIT_FAILURE, "libmount context allocation failed");
-
-	itr = mnt_new_iter(MNT_ITER_FORWARD);
-	if (!itr)
-		err(EXIT_FAILURE, "failed to initialize libmount iterator");
-
-	if (mnt_context_get_mtab(cxt, &tb))
-		err(EXIT_FAILURE, "failed to read mtab");
-
-	while (mnt_table_next_fs(tb, itr, &fs) == 0) {
-		const char *type = mnt_fs_get_fstype(fs);
-
-		if (!strcmp(type, "debugfs")) {
-			found = 1;
-			break;
-		}
-	}
-	if (found) {
-		ret = asprintf(path, "%s/gpio", mnt_fs_get_target(fs));
-		if (ret < 0)
-			err(EXIT_FAILURE, "failed to format string");
-	}
-
-	mnt_free_iter(itr);
-	mnt_free_context(cxt);
-
-	if (!found)
-		return -1;
-
-	return 0;
-}
-
-static int gpio_debugfs_get(const char *consumer, int *dir, int *value)
-{
-	char *debugfs;
-	FILE *f;
-	char *line = NULL;
-	size_t len = 0;
-	char *cur;
-	int found = 0;
-
-	if (get_debugfs(&debugfs) != 0)
-		err(EXIT_FAILURE, "debugfs is not mounted");
-
-	f = fopen(debugfs, "r");
-	if (!f)
-		err(EXIT_FAILURE, "read from gpio debugfs failed");
-
-	/*
-	 * gpio-2   (                    |gpio-selftest               ) in  lo
-	 */
-	while (getline(&line, &len, f) != -1) {
-		cur = strstr(line, consumer);
-		if (cur == NULL)
-			continue;
-
-		cur = strchr(line, ')');
-		if (!cur)
-			continue;
-
-		cur += 2;
-		if (!strncmp(cur, "out", 3)) {
-			*dir = OUT;
-			cur += 4;
-		} else if (!strncmp(cur, "in", 2)) {
-			*dir = IN;
-			cur += 4;
-		}
-
-		if (!strncmp(cur, "hi", 2))
-			*value = 1;
-		else if (!strncmp(cur, "lo", 2))
-			*value = 0;
-
-		found = 1;
-		break;
-	}
-	free(debugfs);
-	fclose(f);
-	free(line);
-
-	if (!found)
-		return -1;
-
-	return 0;
-}
-
-static struct gpiochip_info *list_gpiochip(const char *gpiochip_name, int *ret)
-{
-	struct gpiochip_info *cinfo;
-	struct gpiochip_info *current;
-	const struct dirent *ent;
-	DIR *dp;
-	char *chrdev_name;
-	int fd;
-	int i = 0;
-
-	cinfo = calloc(sizeof(struct gpiochip_info) * 4, GC_NUM + 1);
-	if (!cinfo)
-		err(EXIT_FAILURE, "gpiochip_info allocation failed");
-
-	current = cinfo;
-	dp = opendir("/dev");
-	if (!dp) {
-		*ret = -errno;
-		goto error_out;
-	} else {
-		*ret = 0;
-	}
-
-	while (ent = readdir(dp), ent) {
-		if (check_prefix(ent->d_name, "gpiochip")) {
-			*ret = asprintf(&chrdev_name, "/dev/%s", ent->d_name);
-			if (*ret < 0)
-				goto error_out;
-
-			fd = open(chrdev_name, 0);
-			if (fd == -1) {
-				*ret = -errno;
-				fprintf(stderr, "Failed to open %s\n",
-					chrdev_name);
-				goto error_close_dir;
-			}
-			*ret = ioctl(fd, GPIO_GET_CHIPINFO_IOCTL, current);
-			if (*ret == -1) {
-				perror("Failed to issue CHIPINFO IOCTL\n");
-				goto error_close_dir;
-			}
-			close(fd);
-			if (strcmp(current->label, gpiochip_name) == 0
-			    || check_prefix(current->label, gpiochip_name)) {
-				*ret = 0;
-				current++;
-				i++;
-			}
-		}
-	}
-
-	if ((!*ret && i == 0) || *ret < 0) {
-		free(cinfo);
-		cinfo = NULL;
-	}
-	if (!*ret && i > 0) {
-		cinfo = realloc(cinfo, sizeof(struct gpiochip_info) * 4 * i);
-		*ret = i;
-	}
-
-error_close_dir:
-	closedir(dp);
-error_out:
-	if (*ret < 0)
-		err(EXIT_FAILURE, "list gpiochip failed: %s", strerror(*ret));
-
-	return cinfo;
-}
-
-int gpio_pin_test(struct gpiochip_info *cinfo, int line, int flag, int value)
-{
-	struct gpiohandle_data data;
-	unsigned int lines[] = {line};
-	int fd;
-	int debugfs_dir = IN;
-	int debugfs_value = 0;
-	int ret;
-
-	data.values[0] = value;
-	ret = gpiotools_request_linehandle(cinfo->name, lines, 1, flag, &data,
-					   CONSUMER);
-	if (ret < 0)
-		goto fail_out;
-	else
-		fd = ret;
-
-	ret = gpio_debugfs_get(CONSUMER, &debugfs_dir, &debugfs_value);
-	if (ret) {
-		ret = -EINVAL;
-		goto fail_out;
-	}
-	if (flag & GPIOHANDLE_REQUEST_INPUT) {
-		if (debugfs_dir != IN) {
-			errno = -EINVAL;
-			ret = -errno;
-		}
-	} else if (flag & GPIOHANDLE_REQUEST_OUTPUT) {
-		if (flag & GPIOHANDLE_REQUEST_ACTIVE_LOW)
-			debugfs_value = !debugfs_value;
-
-		if (!(debugfs_dir == OUT && value == debugfs_value)) {
-			errno = -EINVAL;
-			ret = -errno;
-		}
-	}
-	gpiotools_release_linehandle(fd);
-
-fail_out:
-	if (ret)
-		err(EXIT_FAILURE, "gpio<%s> line<%d> test flag<0x%x> value<%d>",
-		    cinfo->name, line, flag, value);
-
-	return ret;
-}
-
-void gpio_pin_tests(struct gpiochip_info *cinfo, unsigned int line)
-{
-	printf("line<%d>", line);
-	gpio_pin_test(cinfo, line, GPIOHANDLE_REQUEST_OUTPUT, 0);
-	printf(".");
-	gpio_pin_test(cinfo, line, GPIOHANDLE_REQUEST_OUTPUT, 1);
-	printf(".");
-	gpio_pin_test(cinfo, line,
-		      GPIOHANDLE_REQUEST_OUTPUT | GPIOHANDLE_REQUEST_ACTIVE_LOW,
-		      0);
-	printf(".");
-	gpio_pin_test(cinfo, line,
-		      GPIOHANDLE_REQUEST_OUTPUT | GPIOHANDLE_REQUEST_ACTIVE_LOW,
-		      1);
-	printf(".");
-	gpio_pin_test(cinfo, line, GPIOHANDLE_REQUEST_INPUT, 0);
-	printf(".");
-}
-
-/*
- * ./gpio-mockup-chardev gpio_chip_name_prefix is_valid_gpio_chip
- * Return 0 if successful or exit with EXIT_FAILURE if test failed.
- * gpio_chip_name_prefix: The prefix of gpiochip you want to test. E.g.
- *			  gpio-mockup
- * is_valid_gpio_chip:	  Whether the gpio_chip is valid. 1 means valid,
- *			  0 means invalid which could not be found by
- *			  list_gpiochip.
- */
-int main(int argc, char *argv[])
-{
-	char *prefix;
-	int valid;
-	struct gpiochip_info *cinfo;
-	struct gpiochip_info *current;
-	int i;
-	int ret;
-
-	if (argc < 3) {
-		printf("Usage: %s prefix is_valid", argv[0]);
-		exit(EXIT_FAILURE);
-	}
-
-	prefix = argv[1];
-	valid = strcmp(argv[2], "true") == 0 ? 1 : 0;
-
-	printf("Test gpiochip %s: ", prefix);
-	cinfo = list_gpiochip(prefix, &ret);
-	if (!cinfo) {
-		if (!valid && ret == 0) {
-			printf("Invalid test successful\n");
-			ret = 0;
-			goto out;
-		} else {
-			ret = -EINVAL;
-			goto out;
-		}
-	} else if (cinfo && !valid) {
-		ret = -EINVAL;
-		goto out;
-	}
-	current = cinfo;
-	for (i = 0; i < ret; i++) {
-		gpio_pin_tests(current, 0);
-		gpio_pin_tests(current, current->lines - 1);
-		gpio_pin_tests(current, random() % current->lines);
-		current++;
-	}
-	ret = 0;
-	printf("successful\n");
-
-out:
-	if (ret)
-		fprintf(stderr, "gpio<%s> test failed\n", prefix);
-
-	if (cinfo)
-		free(cinfo);
-
-	if (ret)
-		exit(EXIT_FAILURE);
-
-	return ret;
-}

tools/testing/selftests/gpio/gpio-mockup-sysfs.sh

 
 # SPDX-License-Identifier: GPL-2.0
-is_consistent()
-{
-	val=
-
-	active_low_sysfs=`cat $GPIO_SYSFS/gpio$nr/active_low`
-	val_sysfs=`cat $GPIO_SYSFS/gpio$nr/value`
-	dir_sysfs=`cat $GPIO_SYSFS/gpio$nr/direction`
 
-	gpio_this_debugfs=`cat $GPIO_DEBUGFS |grep "gpio-$nr" | sed "s/(.*)//g"`
-	dir_debugfs=`echo $gpio_this_debugfs | awk '{print $2}'`
-	val_debugfs=`echo $gpio_this_debugfs | awk '{print $3}'`
-	if [ $val_debugfs = "lo" ]; then
-		val=0
-	elif [ $val_debugfs = "hi" ]; then
-		val=1
-	fi
+# Overrides functions in gpio-mockup.sh to test using the GPIO SYSFS uAPI
 
-	if [ $active_low_sysfs = "1" ]; then
-		if [ $val = "0" ]; then
-			val="1"
-		else
-			val="0"
-		fi
-	fi
+SYSFS=`grep -w sysfs /proc/mounts | cut -f2 -d' '`
+[ -d "$SYSFS" ] || skip "sysfs is not mounted"
 
-	if [ $val_sysfs = $val ] && [ $dir_sysfs = $dir_debugfs ]; then
-		echo -n "."
-	else
-		echo "test fail, exit"
-		die
-	fi
-}
+GPIO_SYSFS="${SYSFS}/class/gpio"
+[ -d "$GPIO_SYSFS" ] || skip "CONFIG_GPIO_SYSFS is not selected"
 
-test_pin_logic()
-{
-	nr=$1
-	direction=$2
-	active_low=$3
-	value=$4
+PLATFORM_SYSFS=$SYSFS/devices/platform
 
-	echo $direction > $GPIO_SYSFS/gpio$nr/direction
-	echo $active_low > $GPIO_SYSFS/gpio$nr/active_low
-	if [ $direction = "out" ]; then
-		echo $value > $GPIO_SYSFS/gpio$nr/value
-	fi
-	is_consistent $nr
-}
+sysfs_nr=
+sysfs_ldir=
 
-test_one_pin()
+# determine the sysfs GPIO number given the $chip and $offset
+# e.g. gpiochip1:32
+find_sysfs_nr()
 {
-	nr=$1
-
-	echo -n "test pin<$nr>"
-
-	echo $nr > $GPIO_SYSFS/export 2>/dev/null
-
-	if [ X$? != X0 ]; then
-		echo "test GPIO pin $nr failed"
-		die
-	fi
-
-	#"Checking if the sysfs is consistent with debugfs: "
-	is_consistent $nr
-
-	#"Checking the logic of active_low: "
-	test_pin_logic $nr out 1 1
-	test_pin_logic $nr out 1 0
-	test_pin_logic $nr out 0 1
-	test_pin_logic $nr out 0 0
-
-	#"Checking the logic of direction: "
-	test_pin_logic $nr in 1 1
-	test_pin_logic $nr out 1 0
-	test_pin_logic $nr low 0 1
-	test_pin_logic $nr high 0 0
-
-	echo $nr > $GPIO_SYSFS/unexport
-
-	echo "successful"
+	# e.g. /sys/devices/platform/gpio-mockup.1/gpiochip1
+	local platform=$(find $PLATFORM_SYSFS -mindepth 2 -maxdepth 2 -type d -name $chip)
+	[ "$platform" ] || fail "can't find platform of $chip"
+	# e.g. /sys/devices/platform/gpio-mockup.1/gpio/gpiochip508/base
+	local base=$(find ${platform%/*}/gpio/ -mindepth 2 -maxdepth 2 -type f -name base)
+	[ "$base" ] || fail "can't find base of $chip"
+	sysfs_nr=$(($(< "$base") + $offset))
+	sysfs_ldir="$GPIO_SYSFS/gpio$sysfs_nr"
 }
 
-test_one_pin_fail()
+acquire_line()
 {
-	nr=$1
-
-	echo $nr > $GPIO_SYSFS/export 2>/dev/null
-
-	if [ X$? != X0 ]; then
-		echo "test invalid pin $nr successful"
-	else
-		echo "test invalid pin $nr failed"
-		echo $nr > $GPIO_SYSFS/unexport 2>/dev/null
-		die
-	fi
+	[ "$sysfs_nr" ] && return
+	find_sysfs_nr
+	echo "$sysfs_nr" > "$GPIO_SYSFS/export"
 }
 
-list_chip()
+# The helpers being overridden...
+get_line()
 {
-	echo `ls -d $GPIO_DRV_SYSFS/gpiochip* 2>/dev/null`
+	[ -e "$sysfs_ldir/value" ] && echo $(< "$sysfs_ldir/value")
 }
 
-test_chip()
+set_line()
 {
-	chip=$1
-	name=`basename $chip`
-	base=`cat $chip/base`
-	ngpio=`cat $chip/ngpio`
-	printf "%-10s %-5s %-5s\n" $name $base $ngpio
-	if [ $ngpio = "0" ]; then
-		echo "number of gpio is zero is not allowed".
-	fi
-	test_one_pin $base
-	test_one_pin $(($base + $ngpio - 1))
-	test_one_pin $((( RANDOM % $ngpio )  + $base ))
+	acquire_line
+
+	for option in $*; do
+		case $option in
+		active-high)
+			echo 0 > "$sysfs_ldir/active_low"
+			;;
+		active-low)
+			echo 1 > "$sysfs_ldir/active_low"
+			;;
+		input)
+			echo "in" > "$sysfs_ldir/direction"
+			;;
+		0)
+			echo "out" > "$sysfs_ldir/direction"
+			echo 0 > "$sysfs_ldir/value"
+			;;
+		1)
+			echo "out" > "$sysfs_ldir/direction"
+			echo 1 > "$sysfs_ldir/value"
+			;;
+		esac
+	done
 }
 
-test_chips_sysfs()
+release_line()
 {
-       gpiochip=`list_chip $module`
-       if [ X"$gpiochip" = X ]; then
-               if [ X"$valid" = Xfalse ]; then
-                       echo "successful"
-               else
-                       echo "fail"
-                       die
-               fi
-       else
-               for chip in $gpiochip; do
-                       test_chip $chip
-               done
-       fi
+	[ "$sysfs_nr" ] || return 0
+	echo "$sysfs_nr" > "$GPIO_SYSFS/unexport"
+	sysfs_nr=
+	sysfs_ldir=
 }
-

tools/testing/selftests/kselftest_deps.sh

@@ -129,13 +129,11 @@ l2_tests=$(grep -r --include=Makefile ": LDLIBS" | \
 		grep -v "VAR_LDLIBS" | awk -F: '{print $1}')
 
 # Level 3
-# gpio,  memfd and others use pkg-config to find mount and fuse libs
+# memfd and others use pkg-config to find mount and fuse libs
 # respectively and save it in VAR_LDLIBS. If pkg-config doesn't find
 # any, VAR_LDLIBS set to default.
 # Use the default value and filter out pkg-config for dependency check.
 # e.g:
-# gpio/Makefile
-#	VAR_LDLIBS := $(shell pkg-config --libs mount) 2>/dev/null)
 # memfd/Makefile
 #	VAR_LDLIBS := $(shell pkg-config fuse --libs 2>/dev/null)